From ba08fea53a43e02b590d89224afdad976dece841 Mon Sep 17 00:00:00 2001 From: Phoebe Buckheister Date: Mon, 17 Feb 2014 11:34:11 +0100 Subject: ieee802154: add support for CCA mode in wpan phys The standard describes four modes of clear channel assesment: "energy above threshold", "carrier found", and the logical and/or of these two. Support for CCA mode setting is included in the at86rf230 driver, predicated for RF212 chips. Signed-off-by: Phoebe Buckheister Signed-off-by: David S. Miller --- net/mac802154/ieee802154_dev.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'net/mac802154') diff --git a/net/mac802154/ieee802154_dev.c b/net/mac802154/ieee802154_dev.c index 56338c8cfc3..4965e4ce6b5 100644 --- a/net/mac802154/ieee802154_dev.c +++ b/net/mac802154/ieee802154_dev.c @@ -185,6 +185,16 @@ static int mac802154_set_lbt(struct wpan_phy *phy, bool on) return priv->ops->set_lbt(&priv->hw, on); } +static int mac802154_set_cca_mode(struct wpan_phy *phy, u8 mode) +{ + struct mac802154_priv *priv = wpan_phy_priv(phy); + + if (!priv->ops->set_cca_mode) + return -ENOTSUPP; + + return priv->ops->set_cca_mode(&priv->hw, mode); +} + struct ieee802154_dev * ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops) { @@ -264,6 +274,7 @@ int ieee802154_register_device(struct ieee802154_dev *dev) priv->phy->del_iface = mac802154_del_iface; priv->phy->set_txpower = mac802154_set_txpower; priv->phy->set_lbt = mac802154_set_lbt; + priv->phy->set_cca_mode = mac802154_set_cca_mode; rc = wpan_phy_register(priv->phy); if (rc < 0) -- cgit v1.2.3-70-g09d2