From 7d0911c02fa2a448a28d7844d2a0c439ff8397b1 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Thu, 19 Sep 2013 17:55:29 +0200 Subject: NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- net/nfc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/nfc/Makefile') diff --git a/net/nfc/Makefile b/net/nfc/Makefile index 2db39713a90..2555ff8e721 100644 --- a/net/nfc/Makefile +++ b/net/nfc/Makefile @@ -10,4 +10,4 @@ obj-$(CONFIG_NFC_DIGITAL) += nfc_digital.o nfc-objs := core.o netlink.o af_nfc.o rawsock.o llcp_core.o llcp_commands.o \ llcp_sock.o -nfc_digital-objs := digital_core.o digital_technology.o +nfc_digital-objs := digital_core.o digital_technology.o digital_dep.o -- cgit v1.2.3-70-g09d2