From 71f78afd67ca51d3656ba45aea293d6e2a27c8bc Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Thu, 8 Jan 2009 11:07:36 -0800 Subject: wimax: fix kconfig interactions with rfkill and input layers WiMAX can work without RFKILL, but it was missing a check to make sure RFKILL is not being made a module with wimax compiled into the kernel. This caused failed builds in s390, where CONFIG_INPUT is always off. When RFKILL is enabled, the code uses the input layer to report hardware switch changes; thus, if RFKILL is enabled, INPUT has to be too. It also needs to display some message when INPUT is disabled that explains why WiMAX is not selectable. (issues found by Randy Dunlap in the linux-next tree). Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: David S. Miller --- net/wimax/Kconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'net/wimax') diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig index 0bdbb692820..18495cdcd10 100644 --- a/net/wimax/Kconfig +++ b/net/wimax/Kconfig @@ -1,9 +1,23 @@ # # WiMAX LAN device configuration # +# Note the ugly 'depends on' on WIMAX: that disallows RFKILL to be a +# module if WIMAX is to be linked in. The WiMAX code is done in such a +# way that it doesn't require and explicit dependency on RFKILL in +# case an embedded system wants to rip it out. +# +# As well, enablement of the RFKILL code means we need the INPUT layer +# support to inject events coming from hw rfkill switches. That +# dependency could be killed if input.h provided appropiate means to +# work when input is disabled. + +comment "WiMAX Wireless Broadband support requires CONFIG_INPUT enabled" + depends on INPUT = n && RFKILL != n menuconfig WIMAX tristate "WiMAX Wireless Broadband support" + depends on (y && RFKILL != m) || m + depends on (INPUT && RFKILL != n) || RFKILL = n help Select to configure support for devices that provide -- cgit v1.2.3-70-g09d2