From b334eaabf4f92226d2df13c613888a507f03da99 Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Thu, 9 Oct 2008 15:00:30 -0400 Subject: RPC/RDMA: fix connection IRD/ORD setting This logic sets the connection parameter that configures the local device and informs the remote peer how many concurrent incoming RDMA_READ requests are supported. The original logic didn't really do what was intended for two reasons: - The max number supported by the device is typically smaller than any one factor in the calculation used, and - The field in the connection parameter structure where the value is stored is a u8 and always overflows for the default settings. So what really happens is the value requested for responder resources is the left over 8 bits from the "desired value". If the desired value happened to be a multiple of 256, the result was zero and it wouldn't connect at all. Given the above and the fact that max_requests is almost always larger than the max responder resources supported by the adapter, this patch simplifies this logic and simply requests the max supported by the device, subject to a reasonable limit. This bug was found by Jim Schutt at Sandia. Signed-off-by: Tom Tucker Acked-by: Tom Talpey Signed-off-by: Trond Myklebust --- net/sunrpc/xprtrdma/verbs.c | 51 +++++++++++++-------------------------------- 1 file changed, 14 insertions(+), 37 deletions(-) (limited to 'net') diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 39a165202d8..e3fe9054fef 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -705,30 +705,13 @@ rpcrdma_ep_create(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia, ep->rep_remote_cma.private_data_len = 0; /* Client offers RDMA Read but does not initiate */ - switch (ia->ri_memreg_strategy) { - case RPCRDMA_BOUNCEBUFFERS: + ep->rep_remote_cma.initiator_depth = 0; + if (ia->ri_memreg_strategy == RPCRDMA_BOUNCEBUFFERS) ep->rep_remote_cma.responder_resources = 0; - break; - case RPCRDMA_MTHCAFMR: - case RPCRDMA_REGISTER: - case RPCRDMA_FRMR: - ep->rep_remote_cma.responder_resources = cdata->max_requests * - (RPCRDMA_MAX_DATA_SEGS / 8); - break; - case RPCRDMA_MEMWINDOWS: - case RPCRDMA_MEMWINDOWS_ASYNC: -#if RPCRDMA_PERSISTENT_REGISTRATION - case RPCRDMA_ALLPHYSICAL: -#endif - ep->rep_remote_cma.responder_resources = cdata->max_requests * - (RPCRDMA_MAX_DATA_SEGS / 2); - break; - default: - break; - } - if (ep->rep_remote_cma.responder_resources > devattr.max_qp_rd_atom) + else if (devattr.max_qp_rd_atom > 32) /* arbitrary but <= 255 */ + ep->rep_remote_cma.responder_resources = 32; + else ep->rep_remote_cma.responder_resources = devattr.max_qp_rd_atom; - ep->rep_remote_cma.initiator_depth = 0; ep->rep_remote_cma.retry_count = 7; ep->rep_remote_cma.flow_control = 0; @@ -858,14 +841,6 @@ if (strnicmp(ia->ri_id->device->dma_device->bus->name, "pci", 3) == 0) { } } - /* Theoretically a client initiator_depth > 0 is not needed, - * but many peers fail to complete the connection unless they - * == responder_resources! */ - if (ep->rep_remote_cma.initiator_depth != - ep->rep_remote_cma.responder_resources) - ep->rep_remote_cma.initiator_depth = - ep->rep_remote_cma.responder_resources; - ep->rep_connected = 0; rc = rdma_connect(ia->ri_id, &ep->rep_remote_cma); @@ -894,14 +869,16 @@ if (strnicmp(ia->ri_id->device->dma_device->bus->name, "pci", 3) == 0) { if (ep->rep_connected <= 0) { /* Sometimes, the only way to reliably connect to remote * CMs is to use same nonzero values for ORD and IRD. */ - ep->rep_remote_cma.initiator_depth = - ep->rep_remote_cma.responder_resources; - if (ep->rep_remote_cma.initiator_depth == 0) - ++ep->rep_remote_cma.initiator_depth; - if (ep->rep_remote_cma.responder_resources == 0) - ++ep->rep_remote_cma.responder_resources; - if (retry_count++ == 0) + if (retry_count++ <= RDMA_CONNECT_RETRY_MAX + 1 && + (ep->rep_remote_cma.responder_resources == 0 || + ep->rep_remote_cma.initiator_depth != + ep->rep_remote_cma.responder_resources)) { + if (ep->rep_remote_cma.responder_resources == 0) + ep->rep_remote_cma.responder_resources = 1; + ep->rep_remote_cma.initiator_depth = + ep->rep_remote_cma.responder_resources; goto retry; + } rc = ep->rep_connected; } else { dprintk("RPC: %s: connected\n", __func__); -- cgit v1.2.3-70-g09d2