From 250c7a61c35a258e2422b3d55c61bfbad33326be Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 12 Jan 2011 23:42:57 +0000 Subject: ALSA: AACI: fix timeout duration Relying on the access time of peripherals is unreliable - it depends on the speed of the CPU and the bus. On Versatile Express, these timeouts were expiring, causing the driver to fail. Add udelay(1) to ensure that they don't expire early, and adjust timeouts to give a reasonable margin over the response times. Signed-off-by: Russell King --- sound/arm/aaci.c | 42 +++++++++++++++++++++++------------------- 1 file changed, 23 insertions(+), 19 deletions(-) (limited to 'sound/arm') diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 21ff6296d16..24d3013c023 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -30,6 +30,8 @@ #define DRIVER_NAME "aaci-pl041" +#define FRAME_PERIOD_US 21 + /* * PM support is not complete. Turn it off. */ @@ -64,8 +66,8 @@ static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val) { struct aaci *aaci = ac97->private_data; + int timeout; u32 v; - int timeout = 5000; if (ac97->num >= 4) return; @@ -81,10 +83,13 @@ static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, writel(val << 4, aaci->base + AACI_SL2TX); writel(reg << 12, aaci->base + AACI_SL1TX); - /* - * Wait for the transmission of both slots to complete. - */ + /* Initially, wait one frame period */ + udelay(FRAME_PERIOD_US); + + /* And then wait an additional eight frame periods for it to be sent */ + timeout = FRAME_PERIOD_US * 8; do { + udelay(1); v = readl(aaci->base + AACI_SLFR); } while ((v & (SLFR_1TXB|SLFR_2TXB)) && --timeout); @@ -101,9 +106,8 @@ static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) { struct aaci *aaci = ac97->private_data; + int timeout, retries = 10; u32 v; - int timeout = 5000; - int retries = 10; if (ac97->num >= 4) return ~0; @@ -117,10 +121,13 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) */ writel((reg << 12) | (1 << 19), aaci->base + AACI_SL1TX); - /* - * Wait for the transmission to complete. - */ + /* Initially, wait one frame period */ + udelay(FRAME_PERIOD_US); + + /* And then wait an additional eight frame periods for it to be sent */ + timeout = FRAME_PERIOD_US * 8; do { + udelay(1); v = readl(aaci->base + AACI_SLFR); } while ((v & SLFR_1TXB) && --timeout); @@ -130,17 +137,13 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) goto out; } - /* - * Give the AC'97 codec more than enough time - * to respond. (42us = ~2 frames at 48kHz.) - */ - udelay(42); + /* Now wait for the response frame */ + udelay(FRAME_PERIOD_US); - /* - * Wait for slot 2 to indicate data. - */ - timeout = 5000; + /* And then wait an additional eight frame periods for data */ + timeout = FRAME_PERIOD_US * 8; do { + udelay(1); cond_resched(); v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV); } while ((v != (SLFR_1RXV|SLFR_2RXV)) && --timeout); @@ -179,6 +182,7 @@ aaci_chan_wait_ready(struct aaci_runtime *aacirun, unsigned long mask) int timeout = 5000; do { + udelay(1); val = readl(aacirun->base + AACI_SR); } while (val & mask && timeout--); } @@ -874,7 +878,7 @@ static int __devinit aaci_probe_ac97(struct aaci *aaci) * Give the AC'97 codec more than enough time * to wake up. (42us = ~2 frames at 48kHz.) */ - udelay(42); + udelay(FRAME_PERIOD_US * 2); ret = snd_ac97_bus(aaci->card, 0, &aaci_bus_ops, aaci, &ac97_bus); if (ret) -- cgit v1.2.3-70-g09d2