From c97dff84e0d9a4e0b7048e033d33511e3897c859 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 29 Jan 2009 11:48:14 +0100 Subject: ALSA: cmi8330: add MPU-401 support Add MPU-401 port support for the chip. Also, update some error messages and description. Signed-off-by: Takashi Iwai --- sound/isa/cmi8330.c | 42 ++++++++++++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 6 deletions(-) (limited to 'sound/isa/cmi8330.c') diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index 11543795741..9ca8122f7ba 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -31,11 +31,11 @@ * To quickly load the module, * * modprobe -a snd-cmi8330 sbport=0x220 sbirq=5 sbdma8=1 - * sbdma16=5 wssport=0x530 wssirq=11 wssdma=0 + * sbdma16=5 wssport=0x530 wssirq=11 wssdma=0 fmport=0x388 * * This card has two mixers and two PCM devices. I've cheesed it such * that recording and playback can be done through the same device. - * The driver "magically" routes the capturing to the AD1848 codec, + * The driver "magically" routes the capturing to the CMI8330 codec, * and playback to the SB16 codec. This allows for full-duplex mode * to some extent. * The utilities in alsa-utils are aware of both devices, so passing @@ -52,6 +52,7 @@ #include #include #include +#include #include #include @@ -81,6 +82,8 @@ static long wssport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; static int wssirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; static int wssdma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; static long fmport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long mpuport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard."); @@ -111,6 +114,10 @@ MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver."); module_param_array(fmport, long, NULL, 0444); MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver."); +module_param_array(mpuport, long, NULL, 0444); +MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver."); +module_param_array(mpuirq, int, NULL, 0444); +MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port."); #ifdef CONFIG_PNP static int isa_registered; static int pnp_registered; @@ -153,6 +160,7 @@ struct snd_cmi8330 { #ifdef CONFIG_PNP struct pnp_dev *cap; struct pnp_dev *play; + struct pnp_dev *mpu; #endif struct snd_card *card; struct snd_wss *wss; @@ -169,7 +177,7 @@ struct snd_cmi8330 { #ifdef CONFIG_PNP static struct pnp_card_device_id snd_cmi8330_pnpids[] = { - { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" } } }, + { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } }, { .id = "" } }; @@ -329,11 +337,15 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, if (acard->play == NULL) return -EBUSY; + acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL); + if (acard->play == NULL) + return -EBUSY; + pdev = acard->cap; err = pnp_activate_dev(pdev); if (err < 0) { - snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n"); + snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n"); return -EBUSY; } wssport[dev] = pnp_port_start(pdev, 0); @@ -354,6 +366,17 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, sbdma16[dev] = pnp_dma(pdev, 1); sbirq[dev] = pnp_irq(pdev, 0); + /* allocate MPU-401 resources */ + pdev = acard->mpu; + + err = pnp_activate_dev(pdev); + if (err < 0) { + snd_printk(KERN_ERR + "CMI8330/C3D (MPU-401) PnP configure failure\n"); + return -EBUSY; + } + mpuport[dev] = pnp_port_start(pdev, 0); + mpuirq[dev] = pnp_irq(pdev, 0); return 0; } #endif @@ -502,11 +525,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) wssdma[dev], -1, WSS_HW_DETECT, 0, &acard->wss); if (err < 0) { - snd_printk(KERN_ERR PFX "(AD1848) device busy??\n"); + snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n"); return err; } if (acard->wss->hardware != WSS_HW_CMI8330) { - snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n"); + snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n"); return -ENODEV; } @@ -552,6 +575,13 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) } } + if (mpuport[dev] != SNDRV_AUTO_PORT) { + if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, + mpuport[dev], 0, mpuirq[dev], + IRQF_DISABLED, NULL) < 0) + printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", + mpuport[dev]); + } strcpy(card->driver, "CMI8330/C3D"); strcpy(card->shortname, "C-Media CMI8330/C3D"); -- cgit v1.2.3-70-g09d2