From 90abdc3b973229bae98dd96649d9f7106cc177a4 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 24 Jul 2010 17:23:51 +0200 Subject: pcmcia: do not use io_req_t when calling pcmcia_request_io() Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch Acked-by: Marcel Holtmann (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski --- sound/pcmcia/pdaudiocf/pdaudiocf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'sound/pcmcia/pdaudiocf') diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 9f897bca061..7ab9174a8a8 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -139,8 +139,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link) pdacf->p_dev = link; link->priv = pdacf; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -219,7 +219,7 @@ static int pdacf_config(struct pcmcia_device *link) snd_printdd(KERN_DEBUG "pdacf_config called\n"); link->conf.ConfigIndex = 0x5; - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; -- cgit v1.2.3-70-g09d2