From d4bc99b977e3a1dd10a84a01ebe59ac2ccebf0cd Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 24 Nov 2010 02:44:06 +0000 Subject: ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI Current AP4 FSI set_rate function used bogus clock process which didn't care enable/disable and clk->usecound. To solve this issue, this patch also modify FSI driver to call set_rate with enough options. This patch modify it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- sound/soc/sh/fsi.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'sound/soc/sh') diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 507e709f280..136414f163e 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -132,6 +132,8 @@ struct fsi_priv { struct fsi_stream playback; struct fsi_stream capture; + long rate; + u32 mst_ctrl; }; @@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream, { struct fsi_priv *fsi = fsi_get_priv(substream); int is_play = fsi_is_play(substream); + struct fsi_master *master = fsi_get_master(fsi); + int (*set_rate)(struct device *dev, int is_porta, int rate, int enable); fsi_irq_disable(fsi, is_play); fsi_clk_ctrl(fsi, 0); + set_rate = master->info->set_rate; + if (set_rate && fsi->rate) + set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0); + fsi->rate = 0; + pm_runtime_put_sync(dai->dev); } @@ -891,9 +900,10 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream, { struct fsi_priv *fsi = fsi_get_priv(substream); struct fsi_master *master = fsi_get_master(fsi); - int (*set_rate)(int is_porta, int rate) = master->info->set_rate; + int (*set_rate)(struct device *dev, int is_porta, int rate, int enable); int fsi_ver = master->core->ver; int is_play = fsi_is_play(substream); + long rate = params_rate(params); int ret; /* if slave mode, set_rate is not needed */ @@ -901,10 +911,15 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream, return 0; /* it is error if no set_rate */ + set_rate = master->info->set_rate; if (!set_rate) return -EIO; - ret = set_rate(fsi_is_port_a(fsi), params_rate(params)); + ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1); + if (ret < 0) /* error */ + return ret; + + fsi->rate = rate; if (ret > 0) { u32 data = 0; -- cgit v1.2.3-70-g09d2