From 34c869855a28af3c6031d29e2267b5a3cce0d67d Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 23 Sep 2011 11:19:13 +0300 Subject: ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37. CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream. This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does BUG_ON(). Fix this by not changing any configuration in omap_mcbsp_dai_set_dai_sysclk if the McBSP is already active. This test should have been here just from the beginning anyway. Signed-off-by: Jarkko Nikula Acked-by: Peter Ujfalusi Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/omap/omap-mcbsp.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'sound') diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index ebcc2d4d2b1..478d6077845 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -516,6 +516,12 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs; int err = 0; + if (mcbsp_data->active) + if (freq == mcbsp_data->in_freq) + return 0; + else + return -EBUSY; + /* The McBSP signal muxing functions are only available on McBSP1 */ if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR || clk_id == OMAP_MCBSP_CLKR_SRC_CLKX || -- cgit v1.2.3-70-g09d2 From 9058020cd9ae3423d6fe7de591698dc96b6701aa Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 27 Sep 2011 11:08:46 +0200 Subject: ASoC: ssm2602: Re-enable oscillator after suspend Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/ssm2602.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index 84f4ad56855..9801cd7cfcb 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -431,7 +431,8 @@ static int ssm2602_set_dai_fmt(struct snd_soc_dai *codec_dai, static int ssm2602_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { - u16 reg = snd_soc_read(codec, SSM2602_PWR) & 0xff7f; + u16 reg = snd_soc_read(codec, SSM2602_PWR); + reg &= ~(PWR_POWER_OFF | PWR_OSC_PDN); switch (level) { case SND_SOC_BIAS_ON: -- cgit v1.2.3-70-g09d2