From 13d457094bc364e942884266036fd1b2ab74308b Mon Sep 17 00:00:00 2001 From: Pavel Hofman Date: Mon, 11 Jun 2007 12:21:20 +0200 Subject: [ALSA] emu10k1 - EMU 1212 with 16 capture channels * adding 8 more 32-bit capture channels (total of 16) for emu1010 cards * adding some code comments and card details description Signed-off-by: Pavel Hofman Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/pci/emu10k1/emu10k1_main.c | 52 +++++++++++++++++++++++++++ sound/pci/emu10k1/emufx.c | 78 ++++++++++++++++++++++++++++++++++++++-- sound/pci/emu10k1/emumixer.c | 16 +++++++++ sound/pci/emu10k1/emupcm.c | 39 ++++++++++++++------ 4 files changed, 172 insertions(+), 13 deletions(-) (limited to 'sound') diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 4a9b59ad8ab..72367411ee6 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -694,6 +694,37 @@ static int snd_emu1010_load_firmware(struct snd_emu10k1 * emu, const char * file return 0; } +/* + * EMU-1010 - details found out from this driver, official MS Win drivers, + * testing the card: + * + * Audigy2 (aka Alice2): + * --------------------- + * * communication over PCI + * * conversion of 32-bit data coming over EMU32 links from HANA FPGA + * to 2 x 16-bit, using internal DSP instructions + * * slave mode, clock supplied by HANA + * * linked to HANA using: + * 32 x 32-bit serial EMU32 output channels + * 16 x EMU32 input channels + * (?) x I2S I/O channels (?) + * + * FPGA (aka HANA): + * --------------- + * * provides all (?) physical inputs and outputs of the card + * (ADC, DAC, SPDIF I/O, ADAT I/O, etc.) + * * provides clock signal for the card and Alice2 + * * two crystals - for 44.1kHz and 48kHz multiples + * * provides internal routing of signal sources to signal destinations + * * inputs/outputs to Alice2 - see above + * + * Current status of the driver: + * ---------------------------- + * * only 44.1/48kHz supported (the MS Win driver supports up to 192 kHz) + * * PCM device nb. 2: + * 16 x 16-bit playback - snd_emu10k1_fx8010_playback_ops + * 16 x 32-bit capture - snd_emu10k1_capture_efx_ops + */ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu) { unsigned int i; @@ -850,6 +881,27 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu) EMU_DST_ALICE2_EMU32_6, EMU_SRC_DOCK_ADC2_LEFT1); snd_emu1010_fpga_link_dst_src_write(emu, EMU_DST_ALICE2_EMU32_7, EMU_SRC_DOCK_ADC2_RIGHT1); + /* Pavel Hofman - setting defaults for 8 more capture channels + * Defaults only, users will set their own values anyways, let's + * just copy/paste. + */ + + snd_emu1010_fpga_link_dst_src_write(emu, + EMU_DST_ALICE2_EMU32_8, EMU_SRC_DOCK_MIC_A1); + snd_emu1010_fpga_link_dst_src_write(emu, + EMU_DST_ALICE2_EMU32_9, EMU_SRC_DOCK_MIC_B1); + snd_emu1010_fpga_link_dst_src_write(emu, + EMU_DST_ALICE2_EMU32_A, EMU_SRC_HAMOA_ADC_LEFT2); + snd_emu1010_fpga_link_dst_src_write(emu, + EMU_DST_ALICE2_EMU32_B, EMU_SRC_HAMOA_ADC_LEFT2); + snd_emu1010_fpga_link_dst_src_write(emu, + EMU_DST_ALICE2_EMU32_C, EMU_SRC_DOCK_ADC1_LEFT1); + snd_emu1010_fpga_link_dst_src_write(emu, + EMU_DST_ALICE2_EMU32_D, EMU_SRC_DOCK_ADC1_RIGHT1); + snd_emu1010_fpga_link_dst_src_write(emu, + EMU_DST_ALICE2_EMU32_E, EMU_SRC_DOCK_ADC2_LEFT1); + snd_emu1010_fpga_link_dst_src_write(emu, + EMU_DST_ALICE2_EMU32_F, EMU_SRC_DOCK_ADC2_RIGHT1); #endif #if 0 /* Original */ diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index c02012cccd8..7206c0fa06f 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -1123,6 +1123,11 @@ snd_emu10k1_init_stereo_onoff_control(struct snd_emu10k1_fx8010_control_gpr *ctl ctl->translation = EMU10K1_GPR_TRANSLATION_ONOFF; } +/* + * Used for emu1010 - conversion from 32-bit capture inputs from HANA + * to 2 x 16-bit registers in audigy - their values are read via DMA. + * Conversion is performed by Audigy DSP instructions of FX8010. + */ static int snd_emu10k1_audigy_dsp_convert_32_to_2x16( struct snd_emu10k1_fx8010_code *icode, u32 *ptr, int tmp, int bit_shifter16, @@ -1193,7 +1198,11 @@ static int __devinit _snd_emu10k1_audigy_init_efx(struct snd_emu10k1 *emu) snd_emu10k1_ptr_write(emu, A_DBG, 0, (emu->fx8010.dbg = 0) | A_DBG_SINGLE_STEP); #if 1 - /* PCM front Playback Volume (independent from stereo mix) */ + /* PCM front Playback Volume (independent from stereo mix) + * playback = 0 + ( gpr * FXBUS_PCM_LEFT_FRONT >> 31) + * where gpr contains attenuation from corresponding mixer control + * (snd_emu10k1_init_stereo_control) + */ A_OP(icode, &ptr, iMAC0, A_GPR(playback), A_C_00000000, A_GPR(gpr), A_FXBUS(FXBUS_PCM_LEFT_FRONT)); A_OP(icode, &ptr, iMAC0, A_GPR(playback+1), A_C_00000000, A_GPR(gpr+1), A_FXBUS(FXBUS_PCM_RIGHT_FRONT)); snd_emu10k1_init_stereo_control(&controls[nctl++], "PCM Front Playback Volume", gpr, 100); @@ -1549,7 +1558,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) if (emu->card_capabilities->emu1010) { snd_printk("EMU inputs on\n"); - /* Capture 8 channels of S32_LE sound */ + /* Capture 16 (originally 8) channels of S32_LE sound */ /* printk("emufx.c: gpr=0x%x, tmp=0x%x\n",gpr, tmp); */ /* For the EMU1010: How to get 32bit values from the DSP. High 16bits into L, low 16bits into R. */ @@ -1560,6 +1569,11 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) snd_emu10k1_audigy_dsp_convert_32_to_2x16( icode, &ptr, tmp, bit_shifter16, A_P16VIN(0x0), A_FXBUS2(0) ); /* Right ADC in 1 of 2 */ gpr_map[gpr++] = 0x00000000; + /* Delaying by one sample: instead of copying the input + * value A_P16VIN to output A_FXBUS2 as in the first channel, + * we use an auxiliary register, delaying the value by one + * sample + */ snd_emu10k1_audigy_dsp_convert_32_to_2x16( icode, &ptr, tmp, bit_shifter16, A_GPR(gpr - 1), A_FXBUS2(2) ); A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0x1), A_C_00000000, A_C_00000000); gpr_map[gpr++] = 0x00000000; @@ -1583,6 +1597,66 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) gpr_map[gpr++] = 0x00000000; snd_emu10k1_audigy_dsp_convert_32_to_2x16( icode, &ptr, tmp, bit_shifter16, A_GPR(gpr - 1), A_FXBUS2(0xe) ); A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0x7), A_C_00000000, A_C_00000000); + /* Pavel Hofman - we still have voices, A_FXBUS2s, and + * A_P16VINs available - + * let's add 8 more capture channels - total of 16 + */ + gpr_map[gpr++] = 0x00000000; + snd_emu10k1_audigy_dsp_convert_32_to_2x16(icode, &ptr, tmp, + bit_shifter16, + A_GPR(gpr - 1), + A_FXBUS2(0x10)); + A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0x8), + A_C_00000000, A_C_00000000); + gpr_map[gpr++] = 0x00000000; + snd_emu10k1_audigy_dsp_convert_32_to_2x16(icode, &ptr, tmp, + bit_shifter16, + A_GPR(gpr - 1), + A_FXBUS2(0x12)); + A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0x9), + A_C_00000000, A_C_00000000); + gpr_map[gpr++] = 0x00000000; + snd_emu10k1_audigy_dsp_convert_32_to_2x16(icode, &ptr, tmp, + bit_shifter16, + A_GPR(gpr - 1), + A_FXBUS2(0x14)); + A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0xa), + A_C_00000000, A_C_00000000); + gpr_map[gpr++] = 0x00000000; + snd_emu10k1_audigy_dsp_convert_32_to_2x16(icode, &ptr, tmp, + bit_shifter16, + A_GPR(gpr - 1), + A_FXBUS2(0x16)); + A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0xb), + A_C_00000000, A_C_00000000); + gpr_map[gpr++] = 0x00000000; + snd_emu10k1_audigy_dsp_convert_32_to_2x16(icode, &ptr, tmp, + bit_shifter16, + A_GPR(gpr - 1), + A_FXBUS2(0x18)); + A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0xc), + A_C_00000000, A_C_00000000); + gpr_map[gpr++] = 0x00000000; + snd_emu10k1_audigy_dsp_convert_32_to_2x16(icode, &ptr, tmp, + bit_shifter16, + A_GPR(gpr - 1), + A_FXBUS2(0x1a)); + A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0xd), + A_C_00000000, A_C_00000000); + gpr_map[gpr++] = 0x00000000; + snd_emu10k1_audigy_dsp_convert_32_to_2x16(icode, &ptr, tmp, + bit_shifter16, + A_GPR(gpr - 1), + A_FXBUS2(0x1c)); + A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0xe), + A_C_00000000, A_C_00000000); + gpr_map[gpr++] = 0x00000000; + snd_emu10k1_audigy_dsp_convert_32_to_2x16(icode, &ptr, tmp, + bit_shifter16, + A_GPR(gpr - 1), + A_FXBUS2(0x1e)); + A_OP(icode, &ptr, iACC3, A_GPR(gpr - 1), A_P16VIN(0xf), + A_C_00000000, A_C_00000000); #if 0 for (z = 4; z < 8; z++) { diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 4db6e1ca166..7b2c1dcc533 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -77,6 +77,10 @@ static int snd_emu10k1_spdif_get_mask(struct snd_kcontrol *kcontrol, return 0; } +/* + * Items labels in enum mixer controls assigning source data to + * each destination + */ static char *emu1010_src_texts[] = { "Silence", "Dock Mic A", @@ -133,6 +137,9 @@ static char *emu1010_src_texts[] = { "DSP 31", }; +/* + * List of data sources available for each destination + */ static unsigned int emu1010_src_regs[] = { EMU_SRC_SILENCE,/* 0 */ EMU_SRC_DOCK_MIC_A1, /* 1 */ @@ -189,6 +196,10 @@ static unsigned int emu1010_src_regs[] = { EMU_SRC_ALICE_EMU32B+0xf, /* 52 */ }; +/* + * Data destinations - physical EMU outputs. + * Each destination has an enum mixer control to choose a data source + */ static unsigned int emu1010_output_dst[] = { EMU_DST_DOCK_DAC1_LEFT1, /* 0 */ EMU_DST_DOCK_DAC1_RIGHT1, /* 1 */ @@ -216,6 +227,11 @@ static unsigned int emu1010_output_dst[] = { EMU_DST_HANA_ADAT+7, /* 23 */ }; +/* + * Data destinations - HANA outputs going to Alice2 (audigy) for + * capture (EMU32 + I2S links) + * Each destination has an enum mixer control to choose a data source + */ static unsigned int emu1010_input_dst[] = { EMU_DST_ALICE2_EMU32_0, EMU_DST_ALICE2_EMU32_1, diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c index ab4f5df5241..eda5cb373de 100644 --- a/sound/pci/emu10k1/emupcm.c +++ b/sound/pci/emu10k1/emupcm.c @@ -1233,24 +1233,26 @@ static int snd_emu10k1_capture_efx_open(struct snd_pcm_substream *substream) runtime->hw.rate_min = runtime->hw.rate_max = 48000; spin_lock_irq(&emu->reg_lock); if (emu->card_capabilities->emu1010) { - /* TODO + /* Nb. of channels has been increased to 16 */ + /* TODO * SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE * SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | * SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | * SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000 * rate_min = 44100, * rate_max = 192000, - * channels_min = 8, - * channels_max = 8, + * channels_min = 16, + * channels_max = 16, * Need to add mixer control to fix sample rate * - * There are 16 mono channels of 16bits each. + * There are 32 mono channels of 16bits each. * 24bit Audio uses 2x channels over 16bit * 96kHz uses 2x channels over 48kHz * 192kHz uses 4x channels over 48kHz - * So, for 48kHz 24bit, one has 8 channels - * for 96kHz 24bit, one has 4 channels - * for 192kHz 24bit, one has 2 channels + * So, for 48kHz 24bit, one has 16 channels + * for 96kHz 24bit, one has 8 channels + * for 192kHz 24bit, one has 4 channels + * */ #if 1 switch (emu->emu1010.internal_clock) { @@ -1258,13 +1260,15 @@ static int snd_emu10k1_capture_efx_open(struct snd_pcm_substream *substream) /* For 44.1kHz */ runtime->hw.rates = SNDRV_PCM_RATE_44100; runtime->hw.rate_min = runtime->hw.rate_max = 44100; - runtime->hw.channels_min = runtime->hw.channels_max = 8; + runtime->hw.channels_min = + runtime->hw.channels_max = 16; break; case 1: /* For 48kHz */ runtime->hw.rates = SNDRV_PCM_RATE_48000; runtime->hw.rate_min = runtime->hw.rate_max = 48000; - runtime->hw.channels_min = runtime->hw.channels_max = 8; + runtime->hw.channels_min = + runtime->hw.channels_max = 16; break; }; #endif @@ -1282,7 +1286,7 @@ static int snd_emu10k1_capture_efx_open(struct snd_pcm_substream *substream) #endif runtime->hw.formats = SNDRV_PCM_FMTBIT_S32_LE; /* efx_voices_mask[0] is expected to be zero - * efx_voices_mask[1] is expected to have 16bits set + * efx_voices_mask[1] is expected to have 32bits set */ } else { runtime->hw.channels_min = runtime->hw.channels_max = 0; @@ -1787,11 +1791,24 @@ int __devinit snd_emu10k1_pcm_efx(struct snd_emu10k1 * emu, int device, struct s /* emu->efx_voices_mask[0] = FXWC_DEFAULTROUTE_C | FXWC_DEFAULTROUTE_A; */ if (emu->audigy) { emu->efx_voices_mask[0] = 0; - emu->efx_voices_mask[1] = 0xffff; + if (emu->card_capabilities->emu1010) + /* Pavel Hofman - 32 voices will be used for + * capture (write mode) - + * each bit = corresponding voice + */ + emu->efx_voices_mask[1] = 0xffffffff; + else + emu->efx_voices_mask[1] = 0xffff; } else { emu->efx_voices_mask[0] = 0xffff0000; emu->efx_voices_mask[1] = 0; } + /* For emu1010, the control has to set 32 upper bits (voices) + * out of the 64 bits (voices) to true for the 16-channels capture + * to work correctly. Correct A_FXWC2 initial value (0xffffffff) + * is already defined but the snd_emu10k1_pcm_efx_voices_mask + * control can override this register's value. + */ kctl = snd_ctl_new1(&snd_emu10k1_pcm_efx_voices_mask, emu); if (!kctl) return -ENOMEM; -- cgit v1.2.3-70-g09d2