From 7a22323b231fe5d47804f98f31a70eb34c6104a9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 22 Apr 2008 17:08:52 +0200 Subject: [ALSA] soc - Support PXA3xx AC97 The PXA3xx does not support the use of interrupts during reset and access to the GPIO status requires similar handling to that for PXA27x. Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/pxa/pxa2xx-ac97.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 1092d58e852..97ec2d90547 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -61,7 +61,7 @@ static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, mutex_lock(&car_mutex); /* set up primary or secondary codec/modem space */ -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; #else if (reg == AC97_GPIO_STATUS) @@ -111,7 +111,7 @@ static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, mutex_lock(&car_mutex); /* set up primary or secondary codec/modem space */ -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; #else if (reg == AC97_GPIO_STATUS) @@ -134,6 +134,9 @@ static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) { +#ifdef CONFIG_PXA3xx + int timeout = 100; +#endif gsr_bits = 0; #ifdef CONFIG_PXA27x @@ -144,6 +147,11 @@ static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) GCR |= GCR_WARM_RST; pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); udelay(500); +#elif defined(CONFIG_PXA3xx) + /* Can't use interrupts */ + GCR |= GCR_WARM_RST; + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); #else GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN; wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); @@ -159,6 +167,16 @@ static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) { +#ifdef CONFIG_PXA3xx + int timeout = 1000; + + /* Hold CLKBPB for 100us */ + GCR = 0; + GCR = GCR_CLKBPB; + udelay(100); + GCR = 0; +#endif + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ GCR &= ~GCR_COLD_RST; /* then assert nCRST */ @@ -170,6 +188,13 @@ static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) clk_disable(ac97conf_clk); GCR = GCR_COLD_RST; udelay(50); +#elif defined(CONFIG_PXA3xx) + /* Can't use interrupts on PXA3xx */ + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + + GCR = GCR_WARM_RST | GCR_COLD_RST; + while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(10); #else GCR = GCR_COLD_RST; GCR |= GCR_CDONE_IE|GCR_SDONE_IE; -- cgit v1.2.3-70-g09d2