From b4e82b5b785670b68136765059d1afc65c0ae023 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 25 Feb 2010 12:52:10 +0000 Subject: ASoC: Check progress when reporting periods from i.MX FIQ handler Currently the i.MX FIQ handler is reporting periods as elapsed based purely on a timer running in the CPU. This means that any clock mismatch between the CPU and the audio subsystem can result in the status reported to applications drifting away from the actual status of the hardware. This is particularly likely at present since the SSI driver is only capable of operating in slave mode so it's very likely that the interface will be clocked from a different source. Instead check the offset reported by the FIQ and only notify when we have transferred at least one period, re-firing the timer if we didn't do so. Also factor out the calculation of the timer expiry time for make it a bit easier to experiment with. Note that this only improves the situation, problems can still be triggered. Signed-off-by: Mark Brown Acked-by: Sascha Hauer Acked-by: Liam Girdwood --- sound/soc/imx/imx-pcm-fiq.c | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) (limited to 'sound') diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c index a1c4ce6ad40..d9cb9849b03 100644 --- a/sound/soc/imx/imx-pcm-fiq.c +++ b/sound/soc/imx/imx-pcm-fiq.c @@ -36,17 +36,24 @@ struct imx_pcm_runtime_data { int period; int periods; unsigned long offset; + unsigned long last_offset; unsigned long size; struct timer_list timer; - int period_time; + int poll_time; }; +static inline void imx_ssi_set_next_poll(struct imx_pcm_runtime_data *iprtd) +{ + iprtd->timer.expires = jiffies + iprtd->poll_time; +} + static void imx_ssi_timer_callback(unsigned long data) { struct snd_pcm_substream *substream = (void *)data; struct snd_pcm_runtime *runtime = substream->runtime; struct imx_pcm_runtime_data *iprtd = runtime->private_data; struct pt_regs regs; + unsigned long delta; get_fiq_regs(®s); @@ -55,9 +62,25 @@ static void imx_ssi_timer_callback(unsigned long data) else iprtd->offset = regs.ARM_r9 & 0xffff; - iprtd->timer.expires = jiffies + iprtd->period_time; + /* How much data have we transferred since the last period report? */ + if (iprtd->offset >= iprtd->last_offset) + delta = iprtd->offset - iprtd->last_offset; + else + delta = runtime->buffer_size + iprtd->offset + - iprtd->last_offset; + + /* If we've transferred at least a period then report it and + * reset our poll time */ + if (delta >= runtime->period_size) { + snd_pcm_period_elapsed(substream); + iprtd->last_offset = iprtd->offset; + + imx_ssi_set_next_poll(iprtd); + } + + /* Restart the timer; if we didn't report we'll run on the next tick */ add_timer(&iprtd->timer); - snd_pcm_period_elapsed(substream); + } static struct fiq_handler fh = { @@ -72,9 +95,10 @@ static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream, iprtd->size = params_buffer_bytes(params); iprtd->periods = params_periods(params); - iprtd->period = params_period_bytes(params); + iprtd->period = params_period_bytes(params) ; iprtd->offset = 0; - iprtd->period_time = HZ / (params_rate(params) / params_period_size(params)); + iprtd->last_offset = 0; + iprtd->poll_time = HZ / (params_rate(params) / params_period_size(params)); snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); @@ -110,7 +134,7 @@ static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - iprtd->timer.expires = jiffies + iprtd->period_time; + imx_ssi_set_next_poll(iprtd); add_timer(&iprtd->timer); if (++fiq_enable == 1) enable_fiq(imx_pcm_fiq); -- cgit v1.2.3-70-g09d2