Tools that manage md devices can be found at http://www..kernel.org/pub/linux/utils/raid/.... Boot time assembly of RAID arrays --------------------------------- You can boot with your md device with the following kernel command lines: for old raid arrays without persistent superblocks: md=,,,,dev0,dev1,...,devn for raid arrays with persistent superblocks md=,dev0,dev1,...,devn or, to assemble a partitionable array: md=d,dev0,dev1,...,devn md device no. = the number of the md device ... 0 means md0, 1 md1, 2 md2, 3 md3, 4 md4 raid level = -1 linear mode 0 striped mode other modes are only supported with persistent super blocks chunk size factor = (raid-0 and raid-1 only) Set the chunk size as 4k << n. fault level = totally ignored dev0-devn: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1 A possible loadlin line (Harald Hoyer ) looks like this: e:\loadlin\loadlin e:\zimage root=/dev/md0 md=0,0,4,0,/dev/hdb2,/dev/hdc3 ro Boot time autodetection of RAID arrays -------------------------------------- When md is compiled into the kernel (not as module), partitions of type 0xfd are scanned and automatically assembled into RAID arrays. This autodetection may be suppressed with the kernel parameter "raid=noautodetect". As of kernel 2.6.9, only drives with a type 0 superblock can be autodetected and run at boot time. The kernel parameter "raid=partitionable" (or "raid=part") means that all auto-detected arrays are assembled as partitionable. Superblock formats ------------------ The md driver can support a variety of different superblock formats. Currently, it supports superblock formats "0.90.0" and the "md-1" format introduced in the 2.5 development series. The kernel will autodetect which format superblock is being used. Superblock format '0' is treated differently to others for legacy reasons - it is the original superblock format. General Rules - apply for all superblock formats ------------------------------------------------ An array is 'created' by writing appropriate superblocks to all devices. It is 'assembled' by associating each of these devices with an particular md virtual device. Once it is completely assembled, it can be accessed. An array should be created by a user-space tool. This will write superblocks to all devices. It will usually mark the array as 'unclean', or with some devices missing so that the kernel md driver can create appropriate redundancy (copying in raid1, parity calculation in raid4/5). When an array is assembled, it is first initialized with the SET_ARRAY_INFO ioctl. This contains, in particular, a major and minor version number. The major version number selects which superblock format is to be used. The minor number might be used to tune handling of the format, such as suggesting where on each device to look for the superblock. Then each device is added using the ADD_NEW_DISK ioctl. This provides, in particular, a major and minor number identifying the device to add. The array is started with the RUN_ARRAY ioctl. Once started, new devices can be added. They should have an appropriate superblock written to them, and then passed be in with ADD_NEW_DISK. Devices that have failed or are not yet active can be detached from an array using HOT_REMOVE_DISK. Specific Rules that apply to format-0 super block arrays, and arrays with no superblock (non-persistent). ------------------------------------------------------------- An array can be 'created' by describing the array (level, chunksize etc) in a SET_ARRAY_INFO ioctl. This must has major_version==0 and raid_disks != 0. Then uninitialized devices can be added with ADD_NEW_DISK. The structure passed to ADD_NEW_DISK must specify the state of the device and it's role in the array. Once started with RUN_ARRAY, uninitialized spares can be added with HOT_ADD_DISK. MD devices in sysfs ------------------- md devices appear in sysfs (/sys) as regular block devices, e.g. /sys/block/md0 Each 'md' device will contain a subdirectory called 'md' which contains further md-specific information about the device. All md devices contain: level a text file indicating the 'raid level'. This may be a standard numerical level prefixed by "RAID-" - e.g. "RAID-5", or some other name such as "linear" or "multipath". If no raid level has been set yet (array is still being assembled), this file will be empty. raid_disks a text file with a simple number indicating the number of devices in a fully functional array. If this is not yet known, the file will be empty. If an array is being resized (not currently possible) this will contain the larger of the old and new sizes. As component devices are added to an md array, they appear in the 'md' directory as new directories named dev-XXX where XXX is a name that the kernel knows for the device, e.g. hdb1. Each directory contains: block a symlink to the block device in /sys/block, e.g. /sys/block/md0/md/dev-hdb1/block -> ../../../../block/hdb/hdb1 super A file containing an image of the superblock read from, or written to, that device. state A file recording the current state of the device in the array which can be a comma separated list of faulty - device has been kicked from active use due to a detected fault in_sync - device is a fully in-sync member of the array spare - device is working, but not a full member. This includes spares that are in the process of being recoverred to This list make grow in future. An active md device will also contain and entry for each active device in the array. These are named rdNN where 'NN' is the possition in the array, starting from 0. So for a 3 drive array there will be rd0, rd1, rd2. These are symbolic links to the appropriate 'dev-XXX' entry. Thus, for example, cat /sys/block/md*/md/rd*/state will show 'in_sync' on every line. Active md devices for levels that support data redundancy (1,4,5,6) also have sync_action a text file that can be used to monitor and control the rebuild process. It contains one word which can be one of: resync - redundancy is being recalculated after unclean shutdown or creation recover - a hot spare is being built to replace a failed/missing device idle - nothing is happening check - A full check of redundancy was requested and is happening. This reads all block and checks them. A repair may also happen for some raid levels. repair - A full check and repair is happening. This is similar to 'resync', but was requested by the user, and the write-intent bitmap is NOT used to optimise the process. This file is writable, and each of the strings that could be read are meaningful for writing. 'idle' will stop an active resync/recovery etc. There is no guarantee that another resync/recovery may not be automatically started again, though some event will be needed to trigger this. 'resync' or 'recovery' can be used to restart the corresponding operation if it was stopped with 'idle'. 'check' and 'repair' will start the appropriate process providing the current state is 'idle'. mismatch_count When performing 'check' and 'repair', and possibly when performing 'resync', md will count the number of errors that are found. The count in 'mismatch_cnt' is the number of sectors that were re-written, or (for 'check') would have been re-written. As most raid levels work in units of pages rather than sectors, this my be larger than the number of actual errors by a factor of the number of sectors in a page. Each active md device may also have attributes specific to the personality module that manages it. These are specific to the implementation of the module and could change substantially if the implementation changes. These currently include stripe_cache_size (currently raid5 only) number of entries in the stripe cache. This is writable, but there are upper and lower limits (32768, 16). Default is 128. strip_cache_active (currently raid5 only) number of active entries in the stripe cache