/* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /include/ "skeleton.dtsi" / { aliases { serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; gpio5 = &gpio6; gpio6 = &gpio7; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; reg = <1>; next-level-cache = <&L2>; }; cpu@2 { compatible = "arm,cortex-a9"; reg = <2>; next-level-cache = <&L2>; }; cpu@3 { compatible = "arm,cortex-a9"; reg = <3>; next-level-cache = <&L2>; }; }; intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; #address-cells = <1>; #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; }; clocks { #address-cells = <1>; #size-cells = <0>; ckil { compatible = "fsl,imx-ckil", "fixed-clock"; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; clock-frequency = <24000000>; }; }; soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&intc>; ranges; dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; clocks = <&clks 106>; }; gpmi-nand@00112000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x00112000 0x2000>, <0x00114000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <0 13 0x04>, <0 15 0x04>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 152>, <&clks 153>, <&clks 151>, <&clks 150>, <&clks 149>; clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"; fsl,gpmi-dma-channel = <0>; status = "disabled"; }; timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; }; L2: l2-cache@00a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 0x04>; cache-unified; cache-level = <2>; }; aips-bus@02000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; spba-bus@02000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; spdif@02004000 { reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; }; ecspi@02008000 { /* eCSPI1 */ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02008000 0x4000>; interrupts = <0 31 0x04>; clocks = <&clks 112>, <&clks 112>; clock-names = "ipg", "per"; status = "disabled"; }; ecspi@0200c000 { /* eCSPI2 */ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x0200c000 0x4000>; interrupts = <0 32 0x04>; clocks = <&clks 113>, <&clks 113>; clock-names = "ipg", "per"; status = "disabled"; }; ecspi@02010000 { /* eCSPI3 */ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02010000 0x4000>; interrupts = <0 33 0x04>; clocks = <&clks 114>, <&clks 114>; clock-names = "ipg", "per"; status = "disabled"; }; ecspi@02014000 { /* eCSPI4 */ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02014000 0x4000>; interrupts = <0 34 0x04>; clocks = <&clks 115>, <&clks 115>; clock-names = "ipg", "per"; status = "disabled"; }; ecspi@02018000 { /* eCSPI5 */ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02018000 0x4000>; interrupts = <0 35 0x04>; clocks = <&clks 116>, <&clks 116>; clock-names = "ipg", "per"; status = "disabled"; }; uart1: serial@02020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; status = "disabled"; }; esai@02024000 { reg = <0x02024000 0x4000>; interrupts = <0 51 0x04>; }; ssi1: ssi@02028000 { compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 0x04>; clocks = <&clks 178>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <38 37>; status = "disabled"; }; ssi2: ssi@0202c000 { compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 0x04>; clocks = <&clks 179>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <42 41>; status = "disabled"; }; ssi3: ssi@02030000 { compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 0x04>; clocks = <&clks 180>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <46 45>; status = "disabled"; }; asrc@02034000 { reg = <0x02034000 0x4000>; interrupts = <0 50 0x04>; }; spba@0203c000 { reg = <0x0203c000 0x4000>; }; }; vpu@02040000 { reg = <0x02040000 0x3c000>; interrupts = <0 3 0x04 0 12 0x04>; }; aipstz@0207c000 { /* AIPSTZ1 */ reg = <0x0207c000 0x4000>; }; pwm@02080000 { /* PWM1 */ #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 0x04>; clocks = <&clks 62>, <&clks 145>; clock-names = "ipg", "per"; }; pwm@02084000 { /* PWM2 */ #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 0x04>; clocks = <&clks 62>, <&clks 146>; clock-names = "ipg", "per"; }; pwm@02088000 { /* PWM3 */ #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 0x04>; clocks = <&clks 62>, <&clks 147>; clock-names = "ipg", "per"; }; pwm@0208c000 { /* PWM4 */ #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 0x04>; clocks = <&clks 62>, <&clks 148>; clock-names = "ipg", "per"; }; flexcan@02090000 { /* CAN1 */ reg = <0x02090000 0x4000>; interrupts = <0 110 0x04>; }; flexcan@02094000 { /* CAN2 */ reg = <0x02094000 0x4000>; interrupts = <0 111 0x04>; }; gpt@02098000 { compatible = "fsl,imx6q-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 0x04>; }; gpio1: gpio@0209c000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 0x04 0 67 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio2: gpio@020a0000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 0x04 0 69 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio3: gpio@020a4000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 0x04 0 71 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio4: gpio@020a8000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 0x04 0 73 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio5: gpio@020ac000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 0x04 0 75 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio6: gpio@020b0000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b0000 0x4000>; interrupts = <0 76 0x04 0 77 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio7: gpio@020b4000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b4000 0x4000>; interrupts = <0 78 0x04 0 79 0x04>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; kpp@020b8000 { reg = <0x020b8000 0x4000>; interrupts = <0 82 0x04>; }; wdog@020bc000 { /* WDOG1 */ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 0x04>; clocks = <&clks 0>; }; wdog@020c0000 { /* WDOG2 */ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 0x04>; clocks = <&clks 0>; status = "disabled"; }; clks: ccm@020c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; #clock-cells = <1>; }; anatop: anatop@020c8000 { compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; regulator-1p1@110 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1375000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; }; regulator-3p0@120 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3150000>; regulator-always-on; anatop-reg-offset = <0x120>; anatop-vol-bit-shift = <8>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; }; regulator-2p5@130 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <0>; anatop-min-voltage = <2000000>; anatop-max-voltage = <2750000>; }; regulator-vddcore@140 { compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; regulator-always-on; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <0>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <1>; anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; regulator-vddpu@140 { compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; regulator-always-on; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <1>; anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; regulator-vddsoc@140 { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; regulator-always-on; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <18>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <1>; anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; }; usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; clocks = <&clks 182>; }; usbphy2: usbphy@020ca000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 0x04>; clocks = <&clks 183>; }; snvs@020cc000 { reg = <0x020cc000 0x4000>; interrupts = <0 19 0x04 0 20 0x04>; }; epit@020d0000 { /* EPIT1 */ reg = <0x020d0000 0x4000>; interrupts = <0 56 0x04>; }; epit@020d4000 { /* EPIT2 */ reg = <0x020d4000 0x4000>; interrupts = <0 57 0x04>; }; src@020d8000 { compatible = "fsl,imx6q-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; }; gpc@020dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupts = <0 89 0x04 0 90 0x04>; }; gpr: iomuxc-gpr@020e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e0000 0x38>; }; iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; /* shared pinctrl settings */ audmux { pinctrl_audmux_1: audmux-1 { fsl,pins = < 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ >; }; }; ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ >; }; }; enet { pinctrl_enet_1: enetgrp-1 { fsl,pins = < 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */ 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */ 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ 1033 0x4001b0a8 /* MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT*/ >; }; pinctrl_enet_2: enetgrp-2 { fsl,pins = < 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */ 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */ 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ >; }; }; gpmi-nand { pinctrl_gpmi_nand_1: gpmi-nand-1 { fsl,pins = < 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ >; }; }; i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = < 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */ >; }; }; uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */ 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */ >; }; }; uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */ >; }; }; uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */ 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */ >; }; }; usbotg { pinctrl_usbotg_1: usbotggrp-1 { fsl,pins = < 1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */ >; }; }; usdhc2 { pinctrl_usdhc2_1: usdhc2grp-1 { fsl,pins = < 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */ 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */ 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */ 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */ 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */ 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */ 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */ 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */ 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */ 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */ >; }; }; usdhc3 { pinctrl_usdhc3_1: usdhc3grp-1 { fsl,pins = < 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ >; }; pinctrl_usdhc3_2: usdhc3grp-2 { fsl,pins = < 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ >; }; }; usdhc4 { pinctrl_usdhc4_1: usdhc4grp-1 { fsl,pins = < 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ >; }; pinctrl_usdhc4_2: usdhc4grp-2 { fsl,pins = < 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ >; }; }; }; dcic@020e4000 { /* DCIC1 */ reg = <0x020e4000 0x4000>; interrupts = <0 124 0x04>; }; dcic@020e8000 { /* DCIC2 */ reg = <0x020e8000 0x4000>; interrupts = <0 125 0x04>; }; sdma@020ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 0x04>; clocks = <&clks 155>, <&clks 155>; clock-names = "ipg", "ahb"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin"; }; }; aips-bus@02100000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; caam@02100000 { reg = <0x02100000 0x40000>; interrupts = <0 105 0x04 0 106 0x04>; }; aipstz@0217c000 { /* AIPSTZ2 */ reg = <0x0217c000 0x4000>; }; usb@02184000 { /* USB OTG */ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; clocks = <&clks 162>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; usb@02184200 { /* USB1 */ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 0x04>; clocks = <&clks 162>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; usb@02184400 { /* USB2 */ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 0x04>; clocks = <&clks 162>; fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; usb@02184600 { /* USB3 */ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 0x04>; clocks = <&clks 162>; fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; usbmisc: usbmisc@02184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks 162>; }; ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; clocks = <&clks 117>, <&clks 117>, <&clks 177>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; mlb@0218c000 { reg = <0x0218c000 0x4000>; interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; }; usdhc@02190000 { /* uSDHC1 */ compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 0x04>; clocks = <&clks 163>, <&clks 163>, <&clks 163>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; usdhc@02194000 { /* uSDHC2 */ compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 0x04>; clocks = <&clks 164>, <&clks 164>, <&clks 164>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; usdhc@02198000 { /* uSDHC3 */ compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 0x04>; clocks = <&clks 165>, <&clks 165>, <&clks 165>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; usdhc@0219c000 { /* uSDHC4 */ compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 0x04>; clocks = <&clks 166>, <&clks 166>, <&clks 166>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; i2c@021a0000 { /* I2C1 */ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a0000 0x4000>; interrupts = <0 36 0x04>; clocks = <&clks 125>; status = "disabled"; }; i2c@021a4000 { /* I2C2 */ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a4000 0x4000>; interrupts = <0 37 0x04>; clocks = <&clks 126>; status = "disabled"; }; i2c@021a8000 { /* I2C3 */ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a8000 0x4000>; interrupts = <0 38 0x04>; clocks = <&clks 127>; status = "disabled"; }; romcp@021ac000 { reg = <0x021ac000 0x4000>; }; mmdc@021b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; mmdc@021b4000 { /* MMDC1 */ reg = <0x021b4000 0x4000>; }; weim@021b8000 { reg = <0x021b8000 0x4000>; interrupts = <0 14 0x04>; }; ocotp@021bc000 { reg = <0x021bc000 0x4000>; }; ocotp@021c0000 { reg = <0x021c0000 0x4000>; interrupts = <0 21 0x04>; }; tzasc@021d0000 { /* TZASC1 */ reg = <0x021d0000 0x4000>; interrupts = <0 108 0x04>; }; tzasc@021d4000 { /* TZASC2 */ reg = <0x021d4000 0x4000>; interrupts = <0 109 0x04>; }; audmux@021d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; }; mipi@021dc000 { /* MIPI-CSI */ reg = <0x021dc000 0x4000>; }; mipi@021e0000 { /* MIPI-DSI */ reg = <0x021e0000 0x4000>; }; vdoa@021e4000 { reg = <0x021e4000 0x4000>; interrupts = <0 18 0x04>; }; uart2: serial@021e8000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; status = "disabled"; }; uart3: serial@021ec000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; status = "disabled"; }; uart4: serial@021f0000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; status = "disabled"; }; uart5: serial@021f4000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 0x04>; clocks = <&clks 160>, <&clks 161>; clock-names = "ipg", "per"; status = "disabled"; }; }; ipu1: ipu@02400000 { #crtc-cells = <1>; compatible = "fsl,imx6q-ipu"; reg = <0x02400000 0x400000>; interrupts = <0 6 0x4 0 5 0x4>; clocks = <&clks 130>, <&clks 131>, <&clks 132>; clock-names = "bus", "di0", "di1"; }; ipu2: ipu@02800000 { #crtc-cells = <1>; compatible = "fsl,imx6q-ipu"; reg = <0x02800000 0x400000>; interrupts = <0 8 0x4 0 7 0x4>; clocks = <&clks 133>, <&clks 134>, <&clks 137>; clock-names = "bus", "di0", "di1"; }; }; };