if ARCH_MX5 # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single # image. So for most time, SOC_IMX50/51/53 should be used. config ARCH_MX51 bool config ARCH_MX50 bool config ARCH_MX53 bool config SOC_IMX50 bool select CPU_V7 select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ select ARCH_MX50 config SOC_IMX51 bool select CPU_V7 select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ select ARCH_MX51 config SOC_IMX53 bool select CPU_V7 select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MX53 #comment "i.MX50 machines:" config MACH_MX50_RDP bool "Support MX50 reference design platform" depends on BROKEN select SOC_IMX50 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX help Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. comment "i.MX51 machines:" config MACH_IMX51_DT bool "Support i.MX51 platforms from device tree" select SOC_IMX51 select USE_OF select MACH_MX51_BABBAGE help Include support for Freescale i.MX51 based platforms using the device tree for discovery config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" select SOC_IMX51 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its peripherals. config MACH_MX51_3DS bool "Support MX51PDK (3DS)" select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD help Include support for MX51PDK (3DS) platform. This includes specific configurations for the board and its peripherals. config MACH_EUKREA_CPUIMX51 bool "Support Eukrea CPUIMX51 module" select SOC_IMX51 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX help Include support for Eukrea CPUIMX51 platform. This includes specific configurations for the module and its peripherals. choice prompt "Baseboard" depends on MACH_EUKREA_CPUIMX51 default MACH_EUKREA_MBIMX51_BASEBOARD config MACH_EUKREA_MBIMX51_BASEBOARD prompt "Eukrea MBIMX51 development board" bool select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMX51 evaluation board. endchoice config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" select SOC_IMX51 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX help Include support for Eukrea CPUIMX51SD platform. This includes specific configurations for the module and its peripherals. choice prompt "Baseboard" depends on MACH_EUKREA_CPUIMX51SD default MACH_EUKREA_MBIMXSD51_BASEBOARD config MACH_EUKREA_MBIMXSD51_BASEBOARD prompt "Eukrea MBIMXSD development board" bool select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. endchoice config MX51_EFIKA_COMMON bool select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_PATA_IMX select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI config MACH_MX51_EFIKAMX bool "Support MX51 Genesi Efika MX nettop" select LEDS_GPIO_REGISTER select MX51_EFIKA_COMMON help Include support for Genesi Efika MX nettop. This includes specific configurations for the board and its peripherals. config MACH_MX51_EFIKASB bool "Support MX51 Genesi Efika Smartbook" select LEDS_GPIO_REGISTER select MX51_EFIKA_COMMON help Include support for Genesi Efika Smartbook. This includes specific configurations for the board and its peripherals. comment "i.MX53 machines:" config MACH_IMX53_DT bool "Support i.MX53 platforms from device tree" select SOC_IMX53 select USE_OF select MACH_MX53_ARD select MACH_MX53_EVK select MACH_MX53_LOCO select MACH_MX53_SMD help Include support for Freescale i.MX53 based platforms using the device tree for discovery config MACH_MX53_EVK bool "Support MX53 EVK platforms" select SOC_IMX53 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER help Include support for MX53 EVK platform. This includes specific configurations for the board and its peripherals. config MACH_MX53_SMD bool "Support MX53 SMD platforms" select SOC_IMX53 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help Include support for MX53 SMD platform. This includes specific configurations for the board and its peripherals. config MACH_MX53_LOCO bool "Support MX53 LOCO platforms" select SOC_IMX53 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_GPIO_KEYS select LEDS_GPIO_REGISTER help Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. config MACH_MX53_ARD bool "Support MX53 ARD platforms" select SOC_IMX53 select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_GPIO_KEYS help Include support for MX53 ARD platform. This includes specific configurations for the board and its peripherals. endif