/*
 * board-omap3pandora.c (Pandora Handheld Console)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>

#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/wl12xx.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/regulator/fixed.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <plat/board.h>
#include <plat/common.h>
#include <mach/gpio.h>
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
#include <plat/display.h>
#include <plat/nand.h>

#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"

#define PANDORA_WIFI_IRQ_GPIO		21
#define PANDORA_WIFI_NRESET_GPIO	23
#define OMAP3_PANDORA_TS_GPIO		94

#define NAND_BLOCK_SIZE			SZ_128K

static struct mtd_partition omap3pandora_nand_partitions[] = {
	{
		.name           = "xloader",
		.offset         = 0,
		.size           = 4 * NAND_BLOCK_SIZE,
		.mask_flags     = MTD_WRITEABLE
	}, {
		.name           = "uboot",
		.offset         = MTDPART_OFS_APPEND,
		.size           = 15 * NAND_BLOCK_SIZE,
	}, {
		.name           = "uboot-env",
		.offset         = MTDPART_OFS_APPEND,
		.size           = 1 * NAND_BLOCK_SIZE,
	}, {
		.name           = "boot",
		.offset         = MTDPART_OFS_APPEND,
		.size           = 80 * NAND_BLOCK_SIZE,
	}, {
		.name           = "rootfs",
		.offset         = MTDPART_OFS_APPEND,
		.size           = MTDPART_SIZ_FULL,
	},
};

static struct omap_nand_platform_data pandora_nand_data = {
	.cs		= 0,
	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
	.parts		= omap3pandora_nand_partitions,
	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
};

static struct gpio_led pandora_gpio_leds[] = {
	{
		.name			= "pandora::sd1",
		.default_trigger	= "mmc0",
		.gpio			= 128,
	}, {
		.name			= "pandora::sd2",
		.default_trigger	= "mmc1",
		.gpio			= 129,
	}, {
		.name			= "pandora::bluetooth",
		.gpio			= 158,
	}, {
		.name			= "pandora::wifi",
		.gpio			= 159,
	},
};

static struct gpio_led_platform_data pandora_gpio_led_data = {
	.leds		= pandora_gpio_leds,
	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
};

static struct platform_device pandora_leds_gpio = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data	= &pandora_gpio_led_data,
	},
};

#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
{								\
	.gpio		= gpio_num,				\
	.type		= ev_type,				\
	.code		= ev_code,				\
	.active_low	= act_low,				\
	.debounce_interval = 4,					\
	.desc		= "btn " descr,				\
}

#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)

static struct gpio_keys_button pandora_gpio_keys[] = {
	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
};

static struct gpio_keys_platform_data pandora_gpio_key_info = {
	.buttons	= pandora_gpio_keys,
	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
};

static struct platform_device pandora_keys_gpio = {
	.name	= "gpio-keys",
	.id	= -1,
	.dev	= {
		.platform_data	= &pandora_gpio_key_info,
	},
};

static const uint32_t board_keymap[] = {
	/* row, col, code */
	KEY(0, 0, KEY_9),
	KEY(0, 1, KEY_8),
	KEY(0, 2, KEY_I),
	KEY(0, 3, KEY_J),
	KEY(0, 4, KEY_N),
	KEY(0, 5, KEY_M),
	KEY(1, 0, KEY_0),
	KEY(1, 1, KEY_7),
	KEY(1, 2, KEY_U),
	KEY(1, 3, KEY_H),
	KEY(1, 4, KEY_B),
	KEY(1, 5, KEY_SPACE),
	KEY(2, 0, KEY_BACKSPACE),
	KEY(2, 1, KEY_6),
	KEY(2, 2, KEY_Y),
	KEY(2, 3, KEY_G),
	KEY(2, 4, KEY_V),
	KEY(2, 5, KEY_FN),
	KEY(3, 0, KEY_O),
	KEY(3, 1, KEY_5),
	KEY(3, 2, KEY_T),
	KEY(3, 3, KEY_F),
	KEY(3, 4, KEY_C),
	KEY(4, 0, KEY_P),
	KEY(4, 1, KEY_4),
	KEY(4, 2, KEY_R),
	KEY(4, 3, KEY_D),
	KEY(4, 4, KEY_X),
	KEY(5, 0, KEY_K),
	KEY(5, 1, KEY_3),
	KEY(5, 2, KEY_E),
	KEY(5, 3, KEY_S),
	KEY(5, 4, KEY_Z),
	KEY(6, 0, KEY_L),
	KEY(6, 1, KEY_2),
	KEY(6, 2, KEY_W),
	KEY(6, 3, KEY_A),
	KEY(6, 4, KEY_DOT),
	KEY(7, 0, KEY_ENTER),
	KEY(7, 1, KEY_1),
	KEY(7, 2, KEY_Q),
	KEY(7, 3, KEY_LEFTSHIFT),
	KEY(7, 4, KEY_COMMA),
};

static struct matrix_keymap_data board_map_data = {
	.keymap			= board_keymap,
	.keymap_size		= ARRAY_SIZE(board_keymap),
};

static struct twl4030_keypad_data pandora_kp_data = {
	.keymap_data	= &board_map_data,
	.rows		= 8,
	.cols		= 6,
	.rep		= 1,
};

static struct omap_dss_device pandora_lcd_device = {
	.name			= "lcd",
	.driver_name		= "tpo_td043mtea1_panel",
	.type			= OMAP_DISPLAY_TYPE_DPI,
	.phy.dpi.data_lines	= 24,
	.reset_gpio		= 157,
};

static struct omap_dss_device pandora_tv_device = {
	.name			= "tv",
	.driver_name		= "venc",
	.type			= OMAP_DISPLAY_TYPE_VENC,
	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
};

static struct omap_dss_device *pandora_dss_devices[] = {
	&pandora_lcd_device,
	&pandora_tv_device,
};

static struct omap_dss_board_info pandora_dss_data = {
	.num_devices	= ARRAY_SIZE(pandora_dss_devices),
	.devices	= pandora_dss_devices,
	.default_device	= &pandora_lcd_device,
};

static struct platform_device pandora_dss_device = {
	.name		= "omapdss",
	.id		= -1,
	.dev		= {
		.platform_data = &pandora_dss_data,
	},
};

static void pandora_wl1251_init_card(struct mmc_card *card)
{
	/*
	 * We have TI wl1251 attached to MMC3. Pass this information to
	 * SDIO core because it can't be probed by normal methods.
	 */
	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
	card->cccr.wide_bus = 1;
	card->cis.vendor = 0x104c;
	card->cis.device = 0x9066;
	card->cis.blksize = 512;
	card->cis.max_dtr = 20000000;
}

static struct omap2_hsmmc_info omap3pandora_mmc[] = {
	{
		.mmc		= 1,
		.caps		= MMC_CAP_4_BIT_DATA,
		.gpio_cd	= -EINVAL,
		.gpio_wp	= 126,
		.ext_clock	= 0,
	},
	{
		.mmc		= 2,
		.caps		= MMC_CAP_4_BIT_DATA,
		.gpio_cd	= -EINVAL,
		.gpio_wp	= 127,
		.ext_clock	= 1,
		.transceiver	= true,
	},
	{
		.mmc		= 3,
		.caps		= MMC_CAP_4_BIT_DATA,
		.gpio_cd	= -EINVAL,
		.gpio_wp	= -EINVAL,
		.init_card	= pandora_wl1251_init_card,
	},
	{}	/* Terminator */
};

static int omap3pandora_twl_gpio_setup(struct device *dev,
		unsigned gpio, unsigned ngpio)
{
	int ret, gpio_32khz;

	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
	omap3pandora_mmc[0].gpio_cd = gpio + 0;
	omap3pandora_mmc[1].gpio_cd = gpio + 1;
	omap2_hsmmc_init(omap3pandora_mmc);

	/* gpio + 13 drives 32kHz buffer for wifi module */
	gpio_32khz = gpio + 13;
	ret = gpio_request(gpio_32khz, "wifi 32kHz");
	if (ret < 0) {
		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
		goto fail;
	}

	ret = gpio_direction_output(gpio_32khz, 1);
	if (ret < 0) {
		pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret);
		goto fail_direction;
	}

	return 0;

fail_direction:
	gpio_free(gpio_32khz);
fail:
	return -ENODEV;
}

static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
	.gpio_base	= OMAP_MAX_GPIO_LINES,
	.irq_base	= TWL4030_GPIO_IRQ_BASE,
	.irq_end	= TWL4030_GPIO_IRQ_END,
	.setup		= omap3pandora_twl_gpio_setup,
};

static struct regulator_consumer_supply pandora_vmmc1_supply =
	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");

static struct regulator_consumer_supply pandora_vmmc2_supply =
	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");

static struct regulator_consumer_supply pandora_vmmc3_supply =
	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.2");

static struct regulator_consumer_supply pandora_vdda_dac_supply =
	REGULATOR_SUPPLY("vdda_dac", "omapdss");

static struct regulator_consumer_supply pandora_vdds_supplies[] = {
	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
};

static struct regulator_consumer_supply pandora_vcc_lcd_supply =
	REGULATOR_SUPPLY("vcc", "display0");

static struct regulator_consumer_supply pandora_usb_phy_supply =
	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");

/* ads7846 on SPI and 2 nub controllers on I2C */
static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
	REGULATOR_SUPPLY("vcc", "spi1.0"),
	REGULATOR_SUPPLY("vcc", "3-0066"),
	REGULATOR_SUPPLY("vcc", "3-0067"),
};

static struct regulator_consumer_supply pandora_adac_supply =
	REGULATOR_SUPPLY("vcc", "soc-audio");

/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data pandora_vmmc1 = {
	.constraints = {
		.min_uV			= 1850000,
		.max_uV			= 3150000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= 1,
	.consumer_supplies	= &pandora_vmmc1_supply,
};

/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
static struct regulator_init_data pandora_vmmc2 = {
	.constraints = {
		.min_uV			= 1850000,
		.max_uV			= 3150000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= 1,
	.consumer_supplies	= &pandora_vmmc2_supply,
};

/* VDAC for DSS driving S-Video */
static struct regulator_init_data pandora_vdac = {
	.constraints = {
		.min_uV			= 1800000,
		.max_uV			= 1800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= 1,
	.consumer_supplies	= &pandora_vdda_dac_supply,
};

/* VPLL2 for digital video outputs */
static struct regulator_init_data pandora_vpll2 = {
	.constraints = {
		.min_uV			= 1800000,
		.max_uV			= 1800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(pandora_vdds_supplies),
	.consumer_supplies	= pandora_vdds_supplies,
};

/* VAUX1 for LCD */
static struct regulator_init_data pandora_vaux1 = {
	.constraints = {
		.min_uV			= 3000000,
		.max_uV			= 3000000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= 1,
	.consumer_supplies	= &pandora_vcc_lcd_supply,
};

/* VAUX2 for USB host PHY */
static struct regulator_init_data pandora_vaux2 = {
	.constraints = {
		.min_uV			= 1800000,
		.max_uV			= 1800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= 1,
	.consumer_supplies	= &pandora_usb_phy_supply,
};

/* VAUX4 for ads7846 and nubs */
static struct regulator_init_data pandora_vaux4 = {
	.constraints = {
		.min_uV			= 2800000,
		.max_uV			= 2800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(pandora_vaux4_supplies),
	.consumer_supplies	= pandora_vaux4_supplies,
};

/* VSIM for audio DAC */
static struct regulator_init_data pandora_vsim = {
	.constraints = {
		.min_uV			= 2800000,
		.max_uV			= 2800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= 1,
	.consumer_supplies	= &pandora_adac_supply,
};

/* Fixed regulator internal to Wifi module */
static struct regulator_init_data pandora_vmmc3 = {
	.constraints = {
		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= 1,
	.consumer_supplies	= &pandora_vmmc3_supply,
};

static struct fixed_voltage_config pandora_vwlan = {
	.supply_name		= "vwlan",
	.microvolts		= 1800000, /* 1.8V */
	.gpio			= PANDORA_WIFI_NRESET_GPIO,
	.startup_delay		= 50000, /* 50ms */
	.enable_high		= 1,
	.enabled_at_boot	= 0,
	.init_data		= &pandora_vmmc3,
};

static struct platform_device pandora_vwlan_device = {
	.name		= "reg-fixed-voltage",
	.id		= 1,
	.dev = {
		.platform_data = &pandora_vwlan,
	},
};

static struct twl4030_usb_data omap3pandora_usb_data = {
	.usb_mode	= T2_USB_MODE_ULPI,
};

static struct twl4030_codec_audio_data omap3pandora_audio_data = {
	.audio_mclk = 26000000,
};

static struct twl4030_codec_data omap3pandora_codec_data = {
	.audio_mclk = 26000000,
	.audio = &omap3pandora_audio_data,
};

static struct twl4030_bci_platform_data pandora_bci_data;

static struct twl4030_platform_data omap3pandora_twldata = {
	.irq_base	= TWL4030_IRQ_BASE,
	.irq_end	= TWL4030_IRQ_END,
	.gpio		= &omap3pandora_gpio_data,
	.usb		= &omap3pandora_usb_data,
	.codec		= &omap3pandora_codec_data,
	.vmmc1		= &pandora_vmmc1,
	.vmmc2		= &pandora_vmmc2,
	.vdac		= &pandora_vdac,
	.vpll2		= &pandora_vpll2,
	.vaux1		= &pandora_vaux1,
	.vaux2		= &pandora_vaux2,
	.vaux4		= &pandora_vaux4,
	.vsim		= &pandora_vsim,
	.keypad		= &pandora_kp_data,
	.bci		= &pandora_bci_data,
};

static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
	{
		I2C_BOARD_INFO("tps65950", 0x48),
		.flags = I2C_CLIENT_WAKE,
		.irq = INT_34XX_SYS_NIRQ,
		.platform_data = &omap3pandora_twldata,
	},
};

static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
	{
		I2C_BOARD_INFO("bq27500", 0x55),
		.flags = I2C_CLIENT_WAKE,
	},
};

static int __init omap3pandora_i2c_init(void)
{
	omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
			ARRAY_SIZE(omap3pandora_i2c_boardinfo));
	/* i2c2 pins are not connected */
	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
			ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
	return 0;
}

static void __init omap3pandora_ads7846_init(void)
{
	int gpio = OMAP3_PANDORA_TS_GPIO;
	int ret;

	ret = gpio_request(gpio, "ads7846_pen_down");
	if (ret < 0) {
		printk(KERN_ERR "Failed to request GPIO %d for "
				"ads7846 pen down IRQ\n", gpio);
		return;
	}

	gpio_direction_input(gpio);
}

static int ads7846_get_pendown_state(void)
{
	return !gpio_get_value(OMAP3_PANDORA_TS_GPIO);
}

static struct ads7846_platform_data ads7846_config = {
	.x_max			= 0x0fff,
	.y_max			= 0x0fff,
	.x_plate_ohms		= 180,
	.pressure_max		= 255,
	.debounce_max		= 10,
	.debounce_tol		= 3,
	.debounce_rep		= 1,
	.get_pendown_state	= ads7846_get_pendown_state,
	.keep_vref_on		= 1,
};

static struct omap2_mcspi_device_config ads7846_mcspi_config = {
	.turbo_mode	= 0,
	.single_channel	= 1,	/* 0: slave, 1: master */
};

static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
	{
		.modalias		= "ads7846",
		.bus_num		= 1,
		.chip_select		= 0,
		.max_speed_hz		= 1500000,
		.controller_data	= &ads7846_mcspi_config,
		.irq			= OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
		.platform_data		= &ads7846_config,
	}, {
		.modalias		= "tpo_td043mtea1_panel_spi",
		.bus_num		= 1,
		.chip_select		= 1,
		.max_speed_hz		= 375000,
		.platform_data		= &pandora_lcd_device,
	}
};

static void __init omap3pandora_init_irq(void)
{
	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
			     mt46h32m32lf6_sdrc_params);
	omap_init_irq();
}

static void pandora_wl1251_set_power(bool enable)
{
	/*
	 * Keep power always on until wl1251_sdio driver learns to re-init
	 * the chip after powering it down and back up.
	 */
}

static struct wl12xx_platform_data pandora_wl1251_pdata = {
	.set_power	= pandora_wl1251_set_power,
	.use_eeprom	= true,
};

static struct platform_device pandora_wl1251_data = {
	.name           = "wl1251_data",
	.id             = -1,
	.dev		= {
		.platform_data	= &pandora_wl1251_pdata,
	},
};

static void pandora_wl1251_init(void)
{
	int ret;

	ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
	if (ret < 0)
		goto fail;

	ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO);
	if (ret < 0)
		goto fail_irq;

	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
	if (pandora_wl1251_pdata.irq < 0)
		goto fail_irq;

	return;

fail_irq:
	gpio_free(PANDORA_WIFI_IRQ_GPIO);
fail:
	printk(KERN_ERR "wl1251 board initialisation failed\n");
}

static struct platform_device *omap3pandora_devices[] __initdata = {
	&pandora_leds_gpio,
	&pandora_keys_gpio,
	&pandora_dss_device,
	&pandora_wl1251_data,
	&pandora_vwlan_device,
};

static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {

	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,

	.phy_reset  = true,
	.reset_gpio_port[0]  = 16,
	.reset_gpio_port[1]  = -EINVAL,
	.reset_gpio_port[2]  = -EINVAL
};

#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
	{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux	NULL
#endif

static struct omap_musb_board_data musb_board_data = {
	.interface_type		= MUSB_INTERFACE_ULPI,
	.mode			= MUSB_OTG,
	.power			= 100,
};

static void __init omap3pandora_init(void)
{
	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	omap3pandora_i2c_init();
	pandora_wl1251_init();
	platform_add_devices(omap3pandora_devices,
			ARRAY_SIZE(omap3pandora_devices));
	omap_serial_init();
	spi_register_board_info(omap3pandora_spi_board_info,
			ARRAY_SIZE(omap3pandora_spi_board_info));
	omap3pandora_ads7846_init();
	usb_ehci_init(&ehci_pdata);
	usb_musb_init(&musb_board_data);
	gpmc_nand_init(&pandora_nand_data);

	/* Ensure SDRC pins are mux'd for self-refresh */
	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}

MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
	.boot_params	= 0x80000100,
	.map_io		= omap3_map_io,
	.reserve	= omap_reserve,
	.init_irq	= omap3pandora_init_irq,
	.init_machine	= omap3pandora_init,
	.timer		= &omap_timer,
MACHINE_END