/* * arch/arm/mach-orion5x/ts78xx-setup.c * * Maintainer: Alexander Clouter * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "mpp.h" /***************************************************************************** * TS-78xx Info ****************************************************************************/ /* * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE */ #define TS78XX_FPGA_REGS_PHYS_BASE 0xe8000000 #define TS78XX_FPGA_REGS_VIRT_BASE 0xff900000 #define TS78XX_FPGA_REGS_SIZE SZ_1M #define TS78XX_FPGA_REGS_SYSCON_ID (TS78XX_FPGA_REGS_VIRT_BASE | 0x000) #define TS78XX_FPGA_REGS_SYSCON_LCDI (TS78XX_FPGA_REGS_VIRT_BASE | 0x004) #define TS78XX_FPGA_REGS_SYSCON_LCDO (TS78XX_FPGA_REGS_VIRT_BASE | 0x008) #define TS78XX_FPGA_REGS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808) #define TS78XX_FPGA_REGS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c) /***************************************************************************** * I/O Address Mapping ****************************************************************************/ static struct map_desc ts78xx_io_desc[] __initdata = { { .virtual = TS78XX_FPGA_REGS_VIRT_BASE, .pfn = __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE), .length = TS78XX_FPGA_REGS_SIZE, .type = MT_DEVICE, }, }; void __init ts78xx_map_io(void) { orion5x_map_io(); iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc)); } /***************************************************************************** * Ethernet ****************************************************************************/ static struct mv643xx_eth_platform_data ts78xx_eth_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; /***************************************************************************** * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c ****************************************************************************/ #ifdef CONFIG_RTC_DRV_M48T86 static unsigned char ts78xx_rtc_readbyte(unsigned long addr) { writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL); return readb(TS78XX_FPGA_REGS_RTC_DATA); } static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr) { writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL); writeb(value, TS78XX_FPGA_REGS_RTC_DATA); } static struct m48t86_ops ts78xx_rtc_ops = { .readbyte = ts78xx_rtc_readbyte, .writebyte = ts78xx_rtc_writebyte, }; static struct platform_device ts78xx_rtc_device = { .name = "rtc-m48t86", .id = -1, .dev = { .platform_data = &ts78xx_rtc_ops, }, .num_resources = 0, }; /* * TS uses some of the user storage space on the RTC chip so see if it is * present; as it's an optional feature at purchase time and not all boards * will have it present * * I've used the method TS use in their rtc7800.c example for the detection * * TODO: track down a guinea pig without an RTC to see if we can work out a * better RTC detection routine */ static int __init ts78xx_rtc_init(void) { unsigned char tmp_rtc0, tmp_rtc1; tmp_rtc0 = ts78xx_rtc_readbyte(126); tmp_rtc1 = ts78xx_rtc_readbyte(127); ts78xx_rtc_writebyte(0x00, 126); ts78xx_rtc_writebyte(0x55, 127); if (ts78xx_rtc_readbyte(127) == 0x55) { ts78xx_rtc_writebyte(0xaa, 127); if (ts78xx_rtc_readbyte(127) == 0xaa && ts78xx_rtc_readbyte(126) == 0x00) { ts78xx_rtc_writebyte(tmp_rtc0, 126); ts78xx_rtc_writebyte(tmp_rtc1, 127); platform_device_register(&ts78xx_rtc_device); return 1; } } return 0; }; #else static int __init ts78xx_rtc_init(void) { return 0; } #endif /***************************************************************************** * SATA ****************************************************************************/ static struct mv_sata_platform_data ts78xx_sata_data = { .n_ports = 2, }; /***************************************************************************** * print some information regarding the board ****************************************************************************/ static void __init ts78xx_print_board_id(void) { unsigned int board_info; board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID); printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ", board_info & 0xff, (board_info >> 8) & 0xffffff); board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI); printk("JP1=%d, JP2=%d\n", (board_info >> 30) & 0x1, (board_info >> 31) & 0x1); }; /***************************************************************************** * General Setup ****************************************************************************/ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = { { 0, MPP_UNUSED }, { 1, MPP_GPIO }, /* JTAG Clock */ { 2, MPP_GPIO }, /* JTAG Data In */ { 3, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB2B */ { 4, MPP_GPIO }, /* JTAG Data Out */ { 5, MPP_GPIO }, /* JTAG TMS */ { 6, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ { 7, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB22B */ { 8, MPP_UNUSED }, { 9, MPP_UNUSED }, { 10, MPP_UNUSED }, { 11, MPP_UNUSED }, { 12, MPP_UNUSED }, { 13, MPP_UNUSED }, { 14, MPP_UNUSED }, { 15, MPP_UNUSED }, { 16, MPP_UART }, { 17, MPP_UART }, { 18, MPP_UART }, { 19, MPP_UART }, /* * MPP[20] PCI Clock Out 1 * MPP[21] PCI Clock Out 0 * MPP[22] Unused * MPP[23] Unused * MPP[24] Unused * MPP[25] Unused */ { -1 }, }; static void __init ts78xx_init(void) { /* * Setup basic Orion functions. Need to be called early. */ orion5x_init(); ts78xx_print_board_id(); orion5x_mpp_conf(ts78xx_mpp_modes); /* * Configure peripherals. */ orion5x_ehci0_init(); orion5x_ehci1_init(); orion5x_eth_init(&ts78xx_eth_data); orion5x_sata_init(&ts78xx_sata_data); orion5x_uart0_init(); orion5x_uart1_init(); orion5x_xor_init(); if (!ts78xx_rtc_init()) printk(KERN_INFO "TS-78xx RTC not detected or enabled\n"); } MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") /* Maintainer: Alexander Clouter */ .phys_io = ORION5X_REGS_PHYS_BASE, .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = ts78xx_init, .map_io = ts78xx_map_io, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, MACHINE_END