/* * Copyright (C) 2008-2009 ST-Ericsson SA * * Author: Srinidhi KASAGAR * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as * published by the Free Software Foundation. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "devices-db8500.h" #include "ste-dma40-db8500.h" /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), }; /* U8500 and U9540 common io_desc */ static struct map_desc u8500_common_io_desc[] __initdata = { /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K), __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K), __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K), __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K), __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K), __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), }; /* U8500 IO map specific description */ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), }; /* U9540 IO map specific description */ static struct map_desc u9540_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K), __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K), }; void __init u8500_map_io(void) { /* * Map the UARTs early so that the DEBUG_LL stuff continues to work. */ iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc)); ux500_map_io(); iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc)); if (cpu_is_ux540_family()) iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc)); else iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } static struct resource db8500_pmu_resources[] = { [0] = { .start = IRQ_DB8500_PMU, .end = IRQ_DB8500_PMU, .flags = IORESOURCE_IRQ, }, }; /* * The PMU IRQ lines of two cores are wired together into a single interrupt. * Bounce the interrupt to the other core if it's not ours. */ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) { irqreturn_t ret = handler(irq, dev); int other = !smp_processor_id(); if (ret == IRQ_NONE && cpu_online(other)) irq_set_affinity(irq, cpumask_of(other)); /* * We should be able to get away with the amount of IRQ_NONEs we give, * while still having the spurious IRQ detection code kick in if the * interrupt really starts hitting spuriously. */ return ret; } struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; static struct platform_device db8500_pmu_device = { .name = "arm-pmu", .id = -1, .num_resources = ARRAY_SIZE(db8500_pmu_resources), .resource = db8500_pmu_resources, .dev.platform_data = &db8500_pmu_platdata, }; static struct platform_device db8500_prcmu_device = { .name = "db8500-prcmu", }; static struct platform_device *platform_devs[] __initdata = { &u8500_dma40_device, &db8500_pmu_device, &db8500_prcmu_device, }; static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK0_BASE, U8500_GPIOBANK1_BASE, U8500_GPIOBANK2_BASE, U8500_GPIOBANK3_BASE, U8500_GPIOBANK4_BASE, U8500_GPIOBANK5_BASE, U8500_GPIOBANK6_BASE, U8500_GPIOBANK7_BASE, U8500_GPIOBANK8_BASE, }; static void __init db8500_add_gpios(struct device *parent) { struct nmk_gpio_platform_data pdata = { .supports_sleepmode = true, }; dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); } static int usb_db8500_rx_dma_cfg[] = { DB8500_DMA_DEV38_USB_OTG_IEP_1_9, DB8500_DMA_DEV37_USB_OTG_IEP_2_10, DB8500_DMA_DEV36_USB_OTG_IEP_3_11, DB8500_DMA_DEV19_USB_OTG_IEP_4_12, DB8500_DMA_DEV18_USB_OTG_IEP_5_13, DB8500_DMA_DEV17_USB_OTG_IEP_6_14, DB8500_DMA_DEV16_USB_OTG_IEP_7_15, DB8500_DMA_DEV39_USB_OTG_IEP_8 }; static int usb_db8500_tx_dma_cfg[] = { DB8500_DMA_DEV38_USB_OTG_OEP_1_9, DB8500_DMA_DEV37_USB_OTG_OEP_2_10, DB8500_DMA_DEV36_USB_OTG_OEP_3_11, DB8500_DMA_DEV19_USB_OTG_OEP_4_12, DB8500_DMA_DEV18_USB_OTG_OEP_5_13, DB8500_DMA_DEV17_USB_OTG_OEP_6_14, DB8500_DMA_DEV16_USB_OTG_OEP_7_15, DB8500_DMA_DEV39_USB_OTG_OEP_8 }; static const char *db8500_read_soc_id(void) { void __iomem *uid = __io_address(U8500_BB_UID_BASE); return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+1), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); } static struct device * __init db8500_soc_device_init(void) { const char *soc_id = db8500_read_soc_id(); return ux500_soc_device_init(soc_id); } /* * This function is called from the board init */ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) { struct device *parent; int i; parent = db8500_soc_device_init(); db8500_add_rtc(parent); db8500_add_gpios(parent); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; db8500_prcmu_device.dev.platform_data = ab8500; platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; } /* TODO: Once all pieces are DT:ed, remove completely. */ struct device * __init u8500_of_init_devices(void) { struct device *parent; parent = db8500_soc_device_init(); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); u8500_dma40_device.dev.parent = parent; /* * Devices to be DT:ed: * u8500_dma40_device = todo * db8500_pmu_device = done * db8500_prcmu_device = done */ platform_device_register(&u8500_dma40_device); return parent; }