/* * linux/arch/arm/mm/cache-v7.S * * Copyright (C) 2001 Deep Blue Solutions Ltd. * Copyright (C) 2005 ARM Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This is the "shell" of the ARMv7 processor support. */ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> #include <asm/unwind.h> #include "proc-macros.S" /* * v7_flush_icache_all() * * Flush the whole I-cache. * * Registers: * r0 - set to 0 */ ENTRY(v7_flush_icache_all) mov r0, #0 ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate mov pc, lr ENDPROC(v7_flush_icache_all) /* * v7_flush_dcache_all() * * Flush the whole D-cache. * * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode) * * - mm - mm_struct describing address space */ ENTRY(v7_flush_dcache_all) dmb @ ensure ordering with previous memory accesses mrc p15, 1, r0, c0, c0, 1 @ read clidr ands r3, r0, #0x7000000 @ extract loc from clidr mov r3, r3, lsr #23 @ left align loc bit field beq finished @ if loc is 0, then no need to clean mov r10, #0 @ start clean at cache level 0 loop1: add r2, r10, r10, lsr #1 @ work out 3x current cache level mov r1, r0, lsr r2 @ extract cache type bits from clidr and r1, r1, #7 @ mask of the bits for current cache only cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr mrc p15, 1, r1, c0, c0, 0 @ read the new csidr and r2, r1, #7 @ extract the length of the cache lines add r2, r2, #4 @ add 4 (line length offset) ldr r4, =0x3ff ands r4, r4, r1, lsr #3 @ find maximum number on the way size clz r5, r4 @ find bit position of way size increment ldr r7, =0x7fff ands r7, r7, r1, lsr #13 @ extract max number of the index size loop2: mov r9, r4 @ create working copy of max way size loop3: ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11 THUMB( lsl r6, r9, r5 ) THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11 THUMB( lsl r6, r7, r2 ) THUMB( orr r11, r11, r6 ) @ factor index number into r11 mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way subs r9, r9, #1 @ decrement the way bge loop3 subs r7, r7, #1 @ decrement the index bge loop2 skip: add r10, r10, #2 @ increment cache number cmp r3, r10 bgt loop1 finished: mov r10, #0 @ swith back to cache level 0 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr dsb isb mov pc, lr ENDPROC(v7_flush_dcache_all) /* * v7_flush_cache_all() * * Flush the entire cache system. * The data cache flush is now achieved using atomic clean / invalidates * working outwards from L1 cache. This is done using Set/Way based cache * maintenance instructions. * The instruction cache can still be invalidated back to the point of * unification in a single instruction. * */ ENTRY(v7_flush_kern_cache_all) ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) bl v7_flush_dcache_all mov r0, #0 ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) mov pc, lr ENDPROC(v7_flush_kern_cache_all) /* * v7_flush_cache_all() * * Flush all TLB entries in a particular address space * * - mm - mm_struct describing address space */ ENTRY(v7_flush_user_cache_all) /*FALLTHROUGH*/ /* * v7_flush_cache_range(start, end, flags) * * Flush a range of TLB entries in the specified address space. * * - start - start address (may not be aligned) * - end - end address (exclusive, may not be aligned) * - flags - vm_area_struct flags describing address space * * It is assumed that: * - we have a VIPT cache. */ ENTRY(v7_flush_user_cache_range) mov pc, lr ENDPROC(v7_flush_user_cache_all) ENDPROC(v7_flush_user_cache_range) /* * v7_coherent_kern_range(start,end) * * Ensure that the I and D caches are coherent within specified * region. This is typically used when code has been written to * a memory region, and will be executed. * * - start - virtual start address of region * - end - virtual end address of region * * It is assumed that: * - the Icache does not read data from the write buffer */ ENTRY(v7_coherent_kern_range) /* FALLTHROUGH */ /* * v7_coherent_user_range(start,end) * * Ensure that the I and D caches are coherent within specified * region. This is typically used when code has been written to * a memory region, and will be executed. * * - start - virtual start address of region * - end - virtual end address of region * * It is assumed that: * - the Icache does not read data from the write buffer */ ENTRY(v7_coherent_user_range) UNWIND(.fnstart ) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 cmp r12, r1 blo 1b dsb icache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 2: USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line add r12, r12, r2 cmp r12, r1 blo 2b 3: mov r0, #0 ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB dsb isb mov pc, lr /* * Fault handling for the cache operation above. If the virtual address in r0 * isn't mapped, just try the next page. */ 9001: mov r12, r12, lsr #12 mov r12, r12, lsl #12 add r12, r12, #4096 b 3b UNWIND(.fnend ) ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) /* * v7_flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * * - addr - kernel address * - size - region size */ ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 cmp r0, r1 blo 1b dsb mov pc, lr ENDPROC(v7_flush_kern_dcache_area) /* * v7_dma_inv_range(start,end) * * Invalidate the data cache within the specified region; we will * be performing a DMA operation in this region and we want to * purge old data in the cache. * * - start - virtual start address of region * - end - virtual end address of region */ v7_dma_inv_range: dcache_line_size r2, r3 sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 bic r1, r1, r3 mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D / U line 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D / U line add r0, r0, r2 cmp r0, r1 blo 1b dsb mov pc, lr ENDPROC(v7_dma_inv_range) /* * v7_dma_clean_range(start,end) * - start - virtual start address of region * - end - virtual end address of region */ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 cmp r0, r1 blo 1b dsb mov pc, lr ENDPROC(v7_dma_clean_range) /* * v7_dma_flush_range(start,end) * - start - virtual start address of region * - end - virtual end address of region */ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 cmp r0, r1 blo 1b dsb mov pc, lr ENDPROC(v7_dma_flush_range) /* * dma_map_area(start, size, dir) * - start - kernel virtual start address * - size - size of region * - dir - DMA direction */ ENTRY(v7_dma_map_area) add r1, r1, r0 teq r2, #DMA_FROM_DEVICE beq v7_dma_inv_range b v7_dma_clean_range ENDPROC(v7_dma_map_area) /* * dma_unmap_area(start, size, dir) * - start - kernel virtual start address * - size - size of region * - dir - DMA direction */ ENTRY(v7_dma_unmap_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE bne v7_dma_inv_range mov pc, lr ENDPROC(v7_dma_unmap_area) __INITDATA .type v7_cache_fns, #object ENTRY(v7_cache_fns) .long v7_flush_icache_all .long v7_flush_kern_cache_all .long v7_flush_user_cache_all .long v7_flush_user_cache_range .long v7_coherent_kern_range .long v7_coherent_user_range .long v7_flush_kern_dcache_area .long v7_dma_map_area .long v7_dma_unmap_area .long v7_dma_flush_range .size v7_cache_fns, . - v7_cache_fns