/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h * * Copyright (C) 2009 Samsung Electronics Ltd. * Jaswinder Singh * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef __S3C64XX_PLAT_SPI_H #define __S3C64XX_PLAT_SPI_H /** * struct s3c64xx_spi_csinfo - ChipSelect description * @fb_delay: Slave specific feedback delay. * Refer to FB_CLK_SEL register definition in SPI chapter. * @line: Custom 'identity' of the CS line. * @set_level: CS line control. * * This is per SPI-Slave Chipselect information. * Allocate and initialize one in machine init code and make the * spi_board_info.controller_data point to it. */ struct s3c64xx_spi_csinfo { u8 fb_delay; unsigned line; void (*set_level)(unsigned line_id, int lvl); }; /** * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. * @src_clk_name: Platform name of the corresponding clock. * @num_cs: Number of CS this controller emulates. * @cfg_gpio: Configure pins for this SPI controller. * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number * @high_speed: If the controller supports HIGH_SPEED_EN bit */ struct s3c64xx_spi_info { int src_clk_nr; char *src_clk_name; int num_cs; int (*cfg_gpio)(struct platform_device *pdev); /* Following two fields are for future compatibility */ int fifo_lvl_mask; int rx_lvl_offset; int high_speed; }; /** * s3c64xx_spi_set_info - SPI Controller configure callback by the board * initialization code. * @cntrlr: SPI controller number the configuration is for. * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. * @num_cs: Number of elements in the 'cs' array. * * Call this from machine init code for each SPI Controller that * has some chips attached to it. */ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */