/* linux/drivers/i2c/busses/i2c-s3c2410.c * * Copyright (C) 2004,2005 Simtec Electronics * Ben Dooks * * S3C2410 I2C Controller * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* i2c controller state */ enum s3c24xx_i2c_state { STATE_IDLE, STATE_START, STATE_READ, STATE_WRITE, STATE_STOP }; struct s3c24xx_i2c { spinlock_t lock; wait_queue_head_t wait; struct i2c_msg *msg; unsigned int msg_num; unsigned int msg_idx; unsigned int msg_ptr; unsigned int tx_setup; unsigned int irq; enum s3c24xx_i2c_state state; unsigned long clkrate; void __iomem *regs; struct clk *clk; struct device *dev; struct resource *ioarea; struct i2c_adapter adap; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; #endif }; /* default platform data removed, dev should always carry data. */ /* s3c24xx_i2c_is2440() * * return true is this is an s3c2440 */ static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c) { struct platform_device *pdev = to_platform_device(i2c->dev); return !strcmp(pdev->name, "s3c2440-i2c"); } /* s3c24xx_i2c_master_complete * * complete the message and wake up the caller, using the given return code, * or zero to mean ok. */ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret) { dev_dbg(i2c->dev, "master_complete %d\n", ret); i2c->msg_ptr = 0; i2c->msg = NULL; i2c->msg_idx++; i2c->msg_num = 0; if (ret) i2c->msg_idx = ret; wake_up(&i2c->wait); } static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c) { unsigned long tmp; tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON); } static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c) { unsigned long tmp; tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON); } /* irq enable/disable functions */ static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) { unsigned long tmp; tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); } static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c) { unsigned long tmp; tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); } /* s3c24xx_i2c_message_start * * put the start of a message onto the bus */ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, struct i2c_msg *msg) { unsigned int addr = (msg->addr & 0x7f) << 1; unsigned long stat; unsigned long iiccon; stat = 0; stat |= S3C2410_IICSTAT_TXRXEN; if (msg->flags & I2C_M_RD) { stat |= S3C2410_IICSTAT_MASTER_RX; addr |= 1; } else stat |= S3C2410_IICSTAT_MASTER_TX; if (msg->flags & I2C_M_REV_DIR_ADDR) addr ^= 1; /* todo - check for wether ack wanted or not */ s3c24xx_i2c_enable_ack(i2c); iiccon = readl(i2c->regs + S3C2410_IICCON); writel(stat, i2c->regs + S3C2410_IICSTAT); dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr); writeb(addr, i2c->regs + S3C2410_IICDS); /* delay here to ensure the data byte has gotten onto the bus * before the transaction is started */ ndelay(i2c->tx_setup); dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon); writel(iiccon, i2c->regs + S3C2410_IICCON); stat |= S3C2410_IICSTAT_START; writel(stat, i2c->regs + S3C2410_IICSTAT); } static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret) { unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT); dev_dbg(i2c->dev, "STOP\n"); /* stop the transfer */ iicstat &= ~S3C2410_IICSTAT_START; writel(iicstat, i2c->regs + S3C2410_IICSTAT); i2c->state = STATE_STOP; s3c24xx_i2c_master_complete(i2c, ret); s3c24xx_i2c_disable_irq(i2c); } /* helper functions to determine the current state in the set of * messages we are sending */ /* is_lastmsg() * * returns TRUE if the current message is the last in the set */ static inline int is_lastmsg(struct s3c24xx_i2c *i2c) { return i2c->msg_idx >= (i2c->msg_num - 1); } /* is_msglast * * returns TRUE if we this is the last byte in the current message */ static inline int is_msglast(struct s3c24xx_i2c *i2c) { return i2c->msg_ptr == i2c->msg->len-1; } /* is_msgend * * returns TRUE if we reached the end of the current message */ static inline int is_msgend(struct s3c24xx_i2c *i2c) { return i2c->msg_ptr >= i2c->msg->len; } /* i2s_s3c_irq_nextbyte * * process an interrupt and work out what to do */ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) { unsigned long tmp; unsigned char byte; int ret = 0; switch (i2c->state) { case STATE_IDLE: dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__); goto out; break; case STATE_STOP: dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); s3c24xx_i2c_disable_irq(i2c); goto out_ack; case STATE_START: /* last thing we did was send a start condition on the * bus, or started a new i2c message */ if (iicstat & S3C2410_IICSTAT_LASTBIT && !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { /* ack was not received... */ dev_dbg(i2c->dev, "ack was not received\n"); s3c24xx_i2c_stop(i2c, -ENXIO); goto out_ack; } if (i2c->msg->flags & I2C_M_RD) i2c->state = STATE_READ; else i2c->state = STATE_WRITE; /* terminate the transfer if there is nothing to do * as this is used by the i2c probe to find devices. */ if (is_lastmsg(i2c) && i2c->msg->len == 0) { s3c24xx_i2c_stop(i2c, 0); goto out_ack; } if (i2c->state == STATE_READ) goto prepare_read; /* fall through to the write state, as we will need to * send a byte as well */ case STATE_WRITE: /* we are writing data to the device... check for the * end of the message, and if so, work out what to do */ if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) { if (iicstat & S3C2410_IICSTAT_LASTBIT) { dev_dbg(i2c->dev, "WRITE: No Ack\n"); s3c24xx_i2c_stop(i2c, -ECONNREFUSED); goto out_ack; } } retry_write: if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; writeb(byte, i2c->regs + S3C2410_IICDS); /* delay after writing the byte to allow the * data setup time on the bus, as writing the * data to the register causes the first bit * to appear on SDA, and SCL will change as * soon as the interrupt is acknowledged */ ndelay(i2c->tx_setup); } else if (!is_lastmsg(i2c)) { /* we need to go to the next i2c message */ dev_dbg(i2c->dev, "WRITE: Next Message\n"); i2c->msg_ptr = 0; i2c->msg_idx++; i2c->msg++; /* check to see if we need to do another message */ if (i2c->msg->flags & I2C_M_NOSTART) { if (i2c->msg->flags & I2C_M_RD) { /* cannot do this, the controller * forces us to send a new START * when we change direction */ s3c24xx_i2c_stop(i2c, -EINVAL); } goto retry_write; } else { /* send the new start */ s3c24xx_i2c_message_start(i2c, i2c->msg); i2c->state = STATE_START; } } else { /* send stop */ s3c24xx_i2c_stop(i2c, 0); } break; case STATE_READ: /* we have a byte of data in the data register, do * something with it, and then work out wether we are * going to do any more read/write */ byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; prepare_read: if (is_msglast(i2c)) { /* last byte of buffer */ if (is_lastmsg(i2c)) s3c24xx_i2c_disable_ack(i2c); } else if (is_msgend(i2c)) { /* ok, we've read the entire buffer, see if there * is anything else we need to do */ if (is_lastmsg(i2c)) { /* last message, send stop and complete */ dev_dbg(i2c->dev, "READ: Send Stop\n"); s3c24xx_i2c_stop(i2c, 0); } else { /* go to the next transfer */ dev_dbg(i2c->dev, "READ: Next Transfer\n"); i2c->msg_ptr = 0; i2c->msg_idx++; i2c->msg++; } } break; } /* acknowlegde the IRQ and get back on with the work */ out_ack: tmp = readl(i2c->regs + S3C2410_IICCON); tmp &= ~S3C2410_IICCON_IRQPEND; writel(tmp, i2c->regs + S3C2410_IICCON); out: return ret; } /* s3c24xx_i2c_irq * * top level IRQ servicing routine */ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id) { struct s3c24xx_i2c *i2c = dev_id; unsigned long status; unsigned long tmp; status = readl(i2c->regs + S3C2410_IICSTAT); if (status & S3C2410_IICSTAT_ARBITR) { /* deal with arbitration loss */ dev_err(i2c->dev, "deal with arbitration loss\n"); } if (i2c->state == STATE_IDLE) { dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n"); tmp = readl(i2c->regs + S3C2410_IICCON); tmp &= ~S3C2410_IICCON_IRQPEND; writel(tmp, i2c->regs + S3C2410_IICCON); goto out; } /* pretty much this leaves us with the fact that we've * transmitted or received whatever byte we last sent */ i2s_s3c_irq_nextbyte(i2c, status); out: return IRQ_HANDLED; } /* s3c24xx_i2c_set_master * * get the i2c bus for a master transaction */ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) { unsigned long iicstat; int timeout = 400; while (timeout-- > 0) { iicstat = readl(i2c->regs + S3C2410_IICSTAT); if (!(iicstat & S3C2410_IICSTAT_BUSBUSY)) return 0; msleep(1); } return -ETIMEDOUT; } /* s3c24xx_i2c_doxfer * * this starts an i2c transfer */ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num) { unsigned long timeout; int ret; if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)) return -EIO; ret = s3c24xx_i2c_set_master(i2c); if (ret != 0) { dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); ret = -EAGAIN; goto out; } spin_lock_irq(&i2c->lock); i2c->msg = msgs; i2c->msg_num = num; i2c->msg_ptr = 0; i2c->msg_idx = 0; i2c->state = STATE_START; s3c24xx_i2c_enable_irq(i2c); s3c24xx_i2c_message_start(i2c, msgs); spin_unlock_irq(&i2c->lock); timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); ret = i2c->msg_idx; /* having these next two as dev_err() makes life very * noisy when doing an i2cdetect */ if (timeout == 0) dev_dbg(i2c->dev, "timeout\n"); else if (ret != num) dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret); /* ensure the stop has been through the bus */ msleep(1); out: return ret; } /* s3c24xx_i2c_xfer * * first port of call from the i2c bus code when an message needs * transferring across the i2c bus. */ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) { struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data; int retry; int ret; for (retry = 0; retry < adap->retries; retry++) { ret = s3c24xx_i2c_doxfer(i2c, msgs, num); if (ret != -EAGAIN) return ret; dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry); udelay(100); } return -EREMOTEIO; } /* declare our i2c functionality */ static u32 s3c24xx_i2c_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING; } /* i2c bus registration info */ static const struct i2c_algorithm s3c24xx_i2c_algorithm = { .master_xfer = s3c24xx_i2c_xfer, .functionality = s3c24xx_i2c_func, }; /* s3c24xx_i2c_calcdivisor * * return the divisor settings for a given frequency */ static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted, unsigned int *div1, unsigned int *divs) { unsigned int calc_divs = clkin / wanted; unsigned int calc_div1; if (calc_divs > (16*16)) calc_div1 = 512; else calc_div1 = 16; calc_divs += calc_div1-1; calc_divs /= calc_div1; if (calc_divs == 0) calc_divs = 1; if (calc_divs > 17) calc_divs = 17; *divs = calc_divs; *div1 = calc_div1; return clkin / (calc_divs * calc_div1); } /* freq_acceptable * * test wether a frequency is within the acceptable range of error */ static inline int freq_acceptable(unsigned int freq, unsigned int wanted) { int diff = freq - wanted; return diff >= -2 && diff <= 2; } /* s3c24xx_i2c_clockrate * * work out a divisor for the user requested frequency setting, * either by the requested frequency, or scanning the acceptable * range of frequencies until something is found */ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) { struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data; unsigned long clkin = clk_get_rate(i2c->clk); unsigned int divs, div1; u32 iiccon; int freq; int start, end; i2c->clkrate = clkin; clkin /= 1000; /* clkin now in KHz */ dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n", pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq); if (pdata->bus_freq != 0) { freq = s3c24xx_i2c_calcdivisor(clkin, pdata->bus_freq/1000, &div1, &divs); if (freq_acceptable(freq, pdata->bus_freq/1000)) goto found; } /* ok, we may have to search for something suitable... */ start = (pdata->max_freq == 0) ? pdata->bus_freq : pdata->max_freq; end = pdata->min_freq; start /= 1000; end /= 1000; /* search loop... */ for (; start > end; start--) { freq = s3c24xx_i2c_calcdivisor(clkin, start, &div1, &divs); if (freq_acceptable(freq, start)) goto found; } /* cannot find frequency spec */ return -EINVAL; found: *got = freq; iiccon = readl(i2c->regs + S3C2410_IICCON); iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512); iiccon |= (divs-1); if (div1 == 512) iiccon |= S3C2410_IICCON_TXDIV_512; writel(iiccon, i2c->regs + S3C2410_IICCON); return 0; } #ifdef CONFIG_CPU_FREQ #define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition) static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb, unsigned long val, void *data) { struct s3c24xx_i2c *i2c = freq_to_i2c(nb); unsigned long flags; unsigned int got; int delta_f; int ret; delta_f = clk_get_rate(i2c->clk) - i2c->clkrate; /* if we're post-change and the input clock has slowed down * or at pre-change and the clock is about to speed up, then * adjust our clock rate. <0 is slow, >0 speedup. */ if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) || (val == CPUFREQ_PRECHANGE && delta_f > 0)) { spin_lock_irqsave(&i2c->lock, flags); ret = s3c24xx_i2c_clockrate(i2c, &got); spin_unlock_irqrestore(&i2c->lock, flags); if (ret < 0) dev_err(i2c->dev, "cannot find frequency\n"); else dev_info(i2c->dev, "setting freq %d\n", got); } return 0; } static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c) { i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition; return cpufreq_register_notifier(&i2c->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); } static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) { cpufreq_unregister_notifier(&i2c->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); } #else static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c) { return 0; } static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) { } #endif /* s3c24xx_i2c_init * * initialise the controller, set the IO lines and frequency */ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) { unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN; struct s3c2410_platform_i2c *pdata; unsigned int freq; /* get the plafrom data */ pdata = i2c->dev->platform_data; /* inititalise the gpio */ if (pdata->cfg_gpio) pdata->cfg_gpio(to_platform_device(i2c->dev)); /* write slave address */ writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD); dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr); writel(iicon, i2c->regs + S3C2410_IICCON); /* we need to work out the divisors for the clock... */ if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) { writel(0, i2c->regs + S3C2410_IICCON); dev_err(i2c->dev, "cannot meet bus frequency required\n"); return -EINVAL; } /* todo - check that the i2c lines aren't being dragged anywhere */ dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq); dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon); /* check for s3c2440 i2c controller */ if (s3c24xx_i2c_is2440(i2c)) { dev_dbg(i2c->dev, "S3C2440_IICLC=%08x\n", pdata->sda_delay); writel(pdata->sda_delay, i2c->regs + S3C2440_IICLC); } return 0; } /* s3c24xx_i2c_probe * * called by the bus driver when a suitable device is found */ static int s3c24xx_i2c_probe(struct platform_device *pdev) { struct s3c24xx_i2c *i2c; struct s3c2410_platform_i2c *pdata; struct resource *res; int ret; pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "no platform data\n"); return -EINVAL; } i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL); if (!i2c) { dev_err(&pdev->dev, "no memory for state\n"); return -ENOMEM; } strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name)); i2c->adap.owner = THIS_MODULE; i2c->adap.algo = &s3c24xx_i2c_algorithm; i2c->adap.retries = 2; i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; i2c->tx_setup = 50; spin_lock_init(&i2c->lock); init_waitqueue_head(&i2c->wait); /* find the clock and enable it */ i2c->dev = &pdev->dev; i2c->clk = clk_get(&pdev->dev, "i2c"); if (IS_ERR(i2c->clk)) { dev_err(&pdev->dev, "cannot get clock\n"); ret = -ENOENT; goto err_noclk; } dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk); clk_enable(i2c->clk); /* map the registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "cannot find IO resource\n"); ret = -ENOENT; goto err_clk; } i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1, pdev->name); if (i2c->ioarea == NULL) { dev_err(&pdev->dev, "cannot request IO\n"); ret = -ENXIO; goto err_clk; } i2c->regs = ioremap(res->start, (res->end-res->start)+1); if (i2c->regs == NULL) { dev_err(&pdev->dev, "cannot map IO\n"); ret = -ENXIO; goto err_ioarea; } dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res); /* setup info block for the i2c core */ i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &pdev->dev; /* initialise the i2c controller */ ret = s3c24xx_i2c_init(i2c); if (ret != 0) goto err_iomap; /* find the IRQ for this unit (note, this relies on the init call to * ensure no current IRQs pending */ i2c->irq = ret = platform_get_irq(pdev, 0); if (ret <= 0) { dev_err(&pdev->dev, "cannot find IRQ\n"); goto err_iomap; } ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED, dev_name(&pdev->dev), i2c); if (ret != 0) { dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq); goto err_iomap; } ret = s3c24xx_i2c_register_cpufreq(i2c); if (ret < 0) { dev_err(&pdev->dev, "failed to register cpufreq notifier\n"); goto err_irq; } /* Note, previous versions of the driver used i2c_add_adapter() * to add the bus at any number. We now pass the bus number via * the platform data, so if unset it will now default to always * being bus 0. */ i2c->adap.nr = pdata->bus_num; ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { dev_err(&pdev->dev, "failed to add bus to i2c core\n"); goto err_cpufreq; } platform_set_drvdata(pdev, i2c); dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id); return 0; err_cpufreq: s3c24xx_i2c_deregister_cpufreq(i2c); err_irq: free_irq(i2c->irq, i2c); err_iomap: iounmap(i2c->regs); err_ioarea: release_resource(i2c->ioarea); kfree(i2c->ioarea); err_clk: clk_disable(i2c->clk); clk_put(i2c->clk); err_noclk: kfree(i2c); return ret; } /* s3c24xx_i2c_remove * * called when device is removed from the bus */ static int s3c24xx_i2c_remove(struct platform_device *pdev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); s3c24xx_i2c_deregister_cpufreq(i2c); i2c_del_adapter(&i2c->adap); free_irq(i2c->irq, i2c); clk_disable(i2c->clk); clk_put(i2c->clk); iounmap(i2c->regs); release_resource(i2c->ioarea); kfree(i2c->ioarea); kfree(i2c); return 0; } #ifdef CONFIG_PM static int s3c24xx_i2c_resume(struct platform_device *dev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); if (i2c != NULL) s3c24xx_i2c_init(i2c); return 0; } #else #define s3c24xx_i2c_resume NULL #endif /* device driver for platform bus bits */ static struct platform_driver s3c2410_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, .name = "s3c2410-i2c", }, }; static struct platform_driver s3c2440_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, .name = "s3c2440-i2c", }, }; static int __init i2c_adap_s3c_init(void) { int ret; ret = platform_driver_register(&s3c2410_i2c_driver); if (ret == 0) { ret = platform_driver_register(&s3c2440_i2c_driver); if (ret) platform_driver_unregister(&s3c2410_i2c_driver); } return ret; } static void __exit i2c_adap_s3c_exit(void) { platform_driver_unregister(&s3c2410_i2c_driver); platform_driver_unregister(&s3c2440_i2c_driver); } module_init(i2c_adap_s3c_init); module_exit(i2c_adap_s3c_exit); MODULE_DESCRIPTION("S3C24XX I2C Bus driver"); MODULE_AUTHOR("Ben Dooks, "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:s3c2410-i2c"); MODULE_ALIAS("platform:s3c2440-i2c");