/* * Afatech AF9035 DVB USB driver * * Copyright (C) 2009 Antti Palosaari * Copyright (C) 2012 Antti Palosaari * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #ifndef AF9035_H #define AF9035_H /* prefix for dvb-usb log writings */ #define DVB_USB_LOG_PREFIX "af9035" #include "dvb-usb.h" struct reg_val { u32 reg; u8 val; }; struct reg_val_mask { u32 reg; u8 val; u8 mask; }; struct usb_req { u8 cmd; u8 mbox; u8 wlen; u8 *wbuf; u8 rlen; u8 *rbuf; }; struct config { bool dual_mode; bool hw_not_supported; }; struct fw_segment { #define SEGMENT_FW_DL 0 #define SEGMENT_ROM_COPY 1 #define SEGMENT_DIRECT_CMD 2 u8 type; u32 len; }; struct fw_header { #define SEGMENT_MAX_COUNT 6 u8 segment_count; struct fw_segment segment[SEGMENT_MAX_COUNT]; }; u32 clock_lut[] = { 20480000, /* FPGA */ 16384000, /* 16.38 MHz */ 20480000, /* 20.48 MHz */ 36000000, /* 36.00 MHz */ 30000000, /* 30.00 MHz */ 26000000, /* 26.00 MHz */ 28000000, /* 28.00 MHz */ 32000000, /* 32.00 MHz */ 34000000, /* 34.00 MHz */ 24000000, /* 24.00 MHz */ 22000000, /* 22.00 MHz */ 12000000, /* 12.00 MHz */ }; /* EEPROM locations */ #define EEPROM_IR_MODE 0x430d #define EEPROM_DUAL_MODE 0x4326 #define EEPROM_IR_TYPE 0x4329 #define EEPROM_1_IFFREQ_L 0x432d #define EEPROM_1_IFFREQ_H 0x432e #define EEPROM_1_TUNER_ID 0x4331 #define EEPROM_2_IFFREQ_L 0x433d #define EEPROM_2_IFFREQ_H 0x433e #define EEPROM_2_TUNER_ID 0x4341 /* USB commands */ #define CMD_MEM_RD 0x00 #define CMD_MEM_WR 0x01 #define CMD_I2C_RD 0x02 #define CMD_I2C_WR 0x03 #define CMD_FW_DL 0x21 #define CMD_FW_QUERYINFO 0x22 #define CMD_FW_BOOT 0x23 #define CMD_FW_DL_BEGIN 0x24 #define CMD_FW_DL_END 0x25 #endif