/* * SQ905C subdriver * * Copyright (C) 2009 Theodore Kilgore * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* * * This driver uses work done in * libgphoto2/camlibs/digigr8, Copyright (C) Theodore Kilgore. * * This driver has also used as a base the sq905c driver * and may contain code fragments from it. */ #define MODULE_NAME "sq905c" #include #include #include "gspca.h" MODULE_AUTHOR("Theodore Kilgore "); MODULE_DESCRIPTION("GSPCA/SQ905C USB Camera Driver"); MODULE_LICENSE("GPL"); /* Default timeouts, in ms */ #define SQ905C_CMD_TIMEOUT 500 #define SQ905C_DATA_TIMEOUT 1000 /* Maximum transfer size to use. */ #define SQ905C_MAX_TRANSFER 0x8000 #define FRAME_HEADER_LEN 0x50 /* Commands. These go in the "value" slot. */ #define SQ905C_CLEAR 0xa0 /* clear everything */ #define SQ905C_GET_ID 0x14f4 /* Read version number */ #define SQ905C_CAPTURE_LOW 0xa040 /* Starts capture at 160x120 */ #define SQ905C_CAPTURE_MED 0x1440 /* Starts capture at 320x240 */ #define SQ905C_CAPTURE_HI 0x2840 /* Starts capture at 320x240 */ /* For capture, this must go in the "index" slot. */ #define SQ905C_CAPTURE_INDEX 0x110f /* Structure to hold all of our device specific stuff */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ const struct v4l2_pix_format *cap_mode; /* Driver stuff */ struct work_struct work_struct; struct workqueue_struct *work_thread; }; /* * Most of these cameras will do 640x480 and 320x240. 160x120 works * in theory but gives very poor output. Therefore, not supported. * The 0x2770:0x9050 cameras have max resolution of 320x240. */ static struct v4l2_pix_format sq905c_mode[] = { { 320, 240, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE, .bytesperline = 320, .sizeimage = 320 * 240, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, { 640, 480, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE, .bytesperline = 640, .sizeimage = 640 * 480, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0} }; /* Send a command to the camera. */ static int sq905c_command(struct gspca_dev *gspca_dev, u16 command, u16 index) { int ret; ret = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), USB_REQ_SYNCH_FRAME, /* request */ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, command, index, NULL, 0, SQ905C_CMD_TIMEOUT); if (ret < 0) { PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)", __func__, ret); return ret; } return 0; } static int sq905c_read(struct gspca_dev *gspca_dev, u16 command, u16 index, int size) { int ret; ret = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), USB_REQ_SYNCH_FRAME, /* request */ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, command, index, gspca_dev->usb_buf, size, SQ905C_CMD_TIMEOUT); if (ret < 0) { PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)", __func__, ret); return ret; } return 0; } /* This function is called as a workqueue function and runs whenever the camera * is streaming data. Because it is a workqueue function it is allowed to sleep * so we can use synchronous USB calls. To avoid possible collisions with other * threads attempting to use the camera's USB interface the gspca usb_lock is * used when performing the one USB control operation inside the workqueue, * which tells the camera to close the stream. In practice the only thing * which needs to be protected against is the usb_set_interface call that * gspca makes during stream_off. Otherwise the camera doesn't provide any * controls that the user could try to change. */ static void sq905c_dostream(struct work_struct *work) { struct sd *dev = container_of(work, struct sd, work_struct); struct gspca_dev *gspca_dev = &dev->gspca_dev; int bytes_left; /* bytes remaining in current frame. */ int data_len; /* size to use for the next read. */ int act_len; int packet_type; int ret; u8 *buffer; buffer = kmalloc(SQ905C_MAX_TRANSFER, GFP_KERNEL | GFP_DMA); if (!buffer) { PDEBUG(D_ERR, "Couldn't allocate USB buffer"); goto quit_stream; } while (gspca_dev->present && gspca_dev->streaming) { /* Request the header, which tells the size to download */ ret = usb_bulk_msg(gspca_dev->dev, usb_rcvbulkpipe(gspca_dev->dev, 0x81), buffer, FRAME_HEADER_LEN, &act_len, SQ905C_DATA_TIMEOUT); PDEBUG(D_STREAM, "Got %d bytes out of %d for header", act_len, FRAME_HEADER_LEN); if (ret < 0 || act_len < FRAME_HEADER_LEN) goto quit_stream; /* size is read from 4 bytes starting 0x40, little endian */ bytes_left = buffer[0x40]|(buffer[0x41]<<8)|(buffer[0x42]<<16) |(buffer[0x43]<<24); PDEBUG(D_STREAM, "bytes_left = 0x%x", bytes_left); /* We keep the header. It has other information, too. */ packet_type = FIRST_PACKET; gspca_frame_add(gspca_dev, packet_type, buffer, FRAME_HEADER_LEN); while (bytes_left > 0 && gspca_dev->present) { data_len = bytes_left > SQ905C_MAX_TRANSFER ? SQ905C_MAX_TRANSFER : bytes_left; ret = usb_bulk_msg(gspca_dev->dev, usb_rcvbulkpipe(gspca_dev->dev, 0x81), buffer, data_len, &act_len, SQ905C_DATA_TIMEOUT); if (ret < 0 || act_len < data_len) goto quit_stream; PDEBUG(D_STREAM, "Got %d bytes out of %d for frame", data_len, bytes_left); bytes_left -= data_len; if (bytes_left == 0) packet_type = LAST_PACKET; else packet_type = INTER_PACKET; gspca_frame_add(gspca_dev, packet_type, buffer, data_len); } } quit_stream: if (gspca_dev->present) { mutex_lock(&gspca_dev->usb_lock); sq905c_command(gspca_dev, SQ905C_CLEAR, 0); mutex_unlock(&gspca_dev->usb_lock); } kfree(buffer); } /* This function is called at probe time just before sd_init */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct cam *cam = &gspca_dev->cam; struct sd *dev = (struct sd *) gspca_dev; int ret; PDEBUG(D_PROBE, "SQ9050 camera detected" " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct); ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0); if (ret < 0) { PDEBUG(D_ERR, "Get version command failed"); return ret; } ret = sq905c_read(gspca_dev, 0xf5, 0, 20); if (ret < 0) { PDEBUG(D_ERR, "Reading version command failed"); return ret; } /* Note we leave out the usb id and the manufacturing date */ PDEBUG(D_PROBE, "SQ9050 ID string: %02x - %02x %02x %02x %02x %02x %02x", gspca_dev->usb_buf[3], gspca_dev->usb_buf[14], gspca_dev->usb_buf[15], gspca_dev->usb_buf[16], gspca_dev->usb_buf[17], gspca_dev->usb_buf[18], gspca_dev->usb_buf[19]); cam->cam_mode = sq905c_mode; cam->nmodes = 2; if (gspca_dev->usb_buf[15] == 0) cam->nmodes = 1; /* We don't use the buffer gspca allocates so make it small. */ cam->bulk_size = 32; cam->bulk = 1; INIT_WORK(&dev->work_struct, sq905c_dostream); return 0; } /* called on streamoff with alt==0 and on disconnect */ /* the usb_lock is held at entry - restore on exit */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *dev = (struct sd *) gspca_dev; /* wait for the work queue to terminate */ mutex_unlock(&gspca_dev->usb_lock); /* This waits for sq905c_dostream to finish */ destroy_workqueue(dev->work_thread); dev->work_thread = NULL; mutex_lock(&gspca_dev->usb_lock); } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { int ret; /* connect to the camera and reset it. */ ret = sq905c_command(gspca_dev, SQ905C_CLEAR, 0); return ret; } /* Set up for getting frames. */ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *dev = (struct sd *) gspca_dev; int ret; dev->cap_mode = gspca_dev->cam.cam_mode; /* "Open the shutter" and set size, to start capture */ switch (gspca_dev->width) { case 640: PDEBUG(D_STREAM, "Start streaming at high resolution"); dev->cap_mode++; ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_HI, SQ905C_CAPTURE_INDEX); break; default: /* 320 */ PDEBUG(D_STREAM, "Start streaming at medium resolution"); ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_MED, SQ905C_CAPTURE_INDEX); } if (ret < 0) { PDEBUG(D_ERR, "Start streaming command failed"); return ret; } /* Start the workqueue function to do the streaming */ dev->work_thread = create_singlethread_workqueue(MODULE_NAME); queue_work(dev->work_thread, &dev->work_struct); return 0; } /* Table of supported USB devices */ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x2770, 0x905c)}, {USB_DEVICE(0x2770, 0x9050)}, {USB_DEVICE(0x2770, 0x9052)}, {USB_DEVICE(0x2770, 0x913d)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, .config = sd_config, .init = sd_init, .start = sd_start, .stop0 = sd_stop0, }; /* -- device connect -- */ static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), THIS_MODULE); } static struct usb_driver sd_driver = { .name = MODULE_NAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, #ifdef CONFIG_PM .suspend = gspca_suspend, .resume = gspca_resume, #endif }; /* -- module insert / remove -- */ static int __init sd_mod_init(void) { return usb_register(&sd_driver); } static void __exit sd_mod_exit(void) { usb_deregister(&sd_driver); } module_init(sd_mod_init); module_exit(sd_mod_exit);