/* * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland * Copyright (c) 2002, 2003 Tuukka Toivonen * Copyright (c) 2008 Erik Andrén * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * P/N 861037: Sensor HDCS1000 ASIC STV0600 * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam * P/N 861075-0040: Sensor HDCS1000 ASIC * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web */ #include #include "stv06xx_sensor.h" MODULE_AUTHOR("Erik Andrén"); MODULE_DESCRIPTION("STV06XX USB Camera Driver"); MODULE_LICENSE("GPL"); static int dump_bridge; static int dump_sensor; int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data) { int err; struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; u8 len = (i2c_data > 0xff) ? 2 : 1; buf[0] = i2c_data & 0xff; buf[1] = (i2c_data >> 8) & 0xff; err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x04, 0x40, address, 0, buf, len, STV06XX_URB_MSG_TIMEOUT); PDEBUG(D_CONF, "Written 0x%x to address 0x%x, status: %d", i2c_data, address, err); return (err < 0) ? err : 0; } int stv06xx_read_bridge(struct sd *sd, u16 address, u8 *i2c_data) { int err; struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x04, 0xc0, address, 0, buf, 1, STV06XX_URB_MSG_TIMEOUT); *i2c_data = buf[0]; PDEBUG(D_CONF, "Reading 0x%x from address 0x%x, status %d", *i2c_data, address, err); return (err < 0) ? err : 0; } /* Wraps the normal write sensor bytes / words functions for writing a single value */ int stv06xx_write_sensor(struct sd *sd, u8 address, u16 value) { if (sd->sensor->i2c_len == 2) { u16 data[2] = { address, value }; return stv06xx_write_sensor_words(sd, data, 1); } else { u8 data[2] = { address, value }; return stv06xx_write_sensor_bytes(sd, data, 1); } } static int stv06xx_write_sensor_finish(struct sd *sd) { int err = 0; if (sd->bridge == BRIDGE_STV610) { struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; buf[0] = 0; err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x04, 0x40, 0x1704, 0, buf, 1, STV06XX_URB_MSG_TIMEOUT); } return (err < 0) ? err : 0; } int stv06xx_write_sensor_bytes(struct sd *sd, const u8 *data, u8 len) { int err, i, j; struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; PDEBUG(D_CONF, "I2C: Command buffer contains %d entries", len); for (i = 0; i < len;) { /* Build the command buffer */ memset(buf, 0, I2C_BUFFER_LENGTH); for (j = 0; j < I2C_MAX_BYTES && i < len; j++, i++) { buf[j] = data[2*i]; buf[0x10 + j] = data[2*i+1]; PDEBUG(D_CONF, "I2C: Writing 0x%02x to reg 0x%02x", data[2*i+1], data[2*i]); } buf[0x20] = sd->sensor->i2c_addr; buf[0x21] = j - 1; /* Number of commands to send - 1 */ buf[0x22] = I2C_WRITE_CMD; err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x04, 0x40, 0x0400, 0, buf, I2C_BUFFER_LENGTH, STV06XX_URB_MSG_TIMEOUT); if (err < 0) return err; } return stv06xx_write_sensor_finish(sd); } int stv06xx_write_sensor_words(struct sd *sd, const u16 *data, u8 len) { int err, i, j; struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; PDEBUG(D_CONF, "I2C: Command buffer contains %d entries", len); for (i = 0; i < len;) { /* Build the command buffer */ memset(buf, 0, I2C_BUFFER_LENGTH); for (j = 0; j < I2C_MAX_WORDS && i < len; j++, i++) { buf[j] = data[2*i]; buf[0x10 + j * 2] = data[2*i+1]; buf[0x10 + j * 2 + 1] = data[2*i+1] >> 8; PDEBUG(D_CONF, "I2C: Writing 0x%04x to reg 0x%02x", data[2*i+1], data[2*i]); } buf[0x20] = sd->sensor->i2c_addr; buf[0x21] = j - 1; /* Number of commands to send - 1 */ buf[0x22] = I2C_WRITE_CMD; err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x04, 0x40, 0x0400, 0, buf, I2C_BUFFER_LENGTH, STV06XX_URB_MSG_TIMEOUT); if (err < 0) return err; } return stv06xx_write_sensor_finish(sd); } int stv06xx_read_sensor(struct sd *sd, const u8 address, u16 *value) { int err; struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; err = stv06xx_write_bridge(sd, STV_I2C_FLUSH, sd->sensor->i2c_flush); if (err < 0) return err; /* Clear mem */ memset(buf, 0, I2C_BUFFER_LENGTH); buf[0] = address; buf[0x20] = sd->sensor->i2c_addr; buf[0x21] = 0; /* Read I2C register */ buf[0x22] = I2C_READ_CMD; err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x04, 0x40, 0x1400, 0, buf, I2C_BUFFER_LENGTH, STV06XX_URB_MSG_TIMEOUT); if (err < 0) { err("I2C: Read error writing address: %d", err); return err; } err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x04, 0xc0, 0x1410, 0, buf, sd->sensor->i2c_len, STV06XX_URB_MSG_TIMEOUT); if (sd->sensor->i2c_len == 2) *value = buf[0] | (buf[1] << 8); else *value = buf[0]; PDEBUG(D_CONF, "I2C: Read 0x%x from address 0x%x, status: %d", *value, address, err); return (err < 0) ? err : 0; } /* Dumps all bridge registers */ static void stv06xx_dump_bridge(struct sd *sd) { int i; u8 data, buf; info("Dumping all stv06xx bridge registers"); for (i = 0x1400; i < 0x160f; i++) { stv06xx_read_bridge(sd, i, &data); info("Read 0x%x from address 0x%x", data, i); } info("Testing stv06xx bridge registers for writability"); for (i = 0x1400; i < 0x160f; i++) { stv06xx_read_bridge(sd, i, &data); buf = data; stv06xx_write_bridge(sd, i, 0xff); stv06xx_read_bridge(sd, i, &data); if (data == 0xff) info("Register 0x%x is read/write", i); else if (data != buf) info("Register 0x%x is read/write," " but only partially", i); else info("Register 0x%x is read-only", i); stv06xx_write_bridge(sd, i, buf); } } /* this function is called at probe and resume time */ static int stv06xx_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int err; PDEBUG(D_PROBE, "Initializing camera"); /* Let the usb init settle for a bit before performing the initialization */ msleep(250); err = sd->sensor->init(sd); if (dump_sensor && sd->sensor->dump) sd->sensor->dump(sd); return (err < 0) ? err : 0; } /* Start the camera */ static int stv06xx_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct usb_host_interface *alt; struct usb_interface *intf; int err, packet_size; intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); if (!alt) { PDEBUG(D_ERR, "Couldn't get altsetting"); return -EIO; } packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size); if (err < 0) return err; /* Prepare the sensor for start */ err = sd->sensor->start(sd); if (err < 0) goto out; /* Start isochronous streaming */ err = stv06xx_write_bridge(sd, STV_ISO_ENABLE, 1); out: if (err < 0) PDEBUG(D_STREAM, "Starting stream failed"); else PDEBUG(D_STREAM, "Started streaming"); return (err < 0) ? err : 0; } static int stv06xx_isoc_init(struct gspca_dev *gspca_dev) { struct usb_host_interface *alt; struct sd *sd = (struct sd *) gspca_dev; /* Start isoc bandwidth "negotiation" at max isoc bandwidth */ alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1]; alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]); return 0; } static int stv06xx_isoc_nego(struct gspca_dev *gspca_dev) { int ret, packet_size, min_packet_size; struct usb_host_interface *alt; struct sd *sd = (struct sd *) gspca_dev; alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1]; packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode]; if (packet_size <= min_packet_size) return -EIO; packet_size -= 100; if (packet_size < min_packet_size) packet_size = min_packet_size; alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(packet_size); ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 1); if (ret < 0) PDEBUG(D_ERR|D_STREAM, "set alt 1 err %d", ret); return ret; } static void stv06xx_stopN(struct gspca_dev *gspca_dev) { int err; struct sd *sd = (struct sd *) gspca_dev; /* stop ISO-streaming */ err = stv06xx_write_bridge(sd, STV_ISO_ENABLE, 0); if (err < 0) goto out; err = sd->sensor->stop(sd); out: if (err < 0) PDEBUG(D_STREAM, "Failed to stop stream"); else PDEBUG(D_STREAM, "Stopped streaming"); } /* * Analyse an USB packet of the data stream and store it appropriately. * Each packet contains an integral number of chunks. Each chunk has * 2-bytes identification, followed by 2-bytes that describe the chunk * length. Known/guessed chunk identifications are: * 8001/8005/C001/C005 - Begin new frame * 8002/8006/C002/C006 - End frame * 0200/4200 - Contains actual image data, bayer or compressed * 0005 - 11 bytes of unknown data * 0100 - 2 bytes of unknown data * The 0005 and 0100 chunks seem to appear only in compressed stream. */ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; PDEBUG(D_PACK, "Packet of length %d arrived", len); /* A packet may contain several frames loop until the whole packet is reached */ while (len) { int id, chunk_len; if (len < 4) { PDEBUG(D_PACK, "Packet is smaller than 4 bytes"); return; } /* Capture the id */ id = (data[0] << 8) | data[1]; /* Capture the chunk length */ chunk_len = (data[2] << 8) | data[3]; PDEBUG(D_PACK, "Chunk id: %x, length: %d", id, chunk_len); data += 4; len -= 4; if (len < chunk_len) { PDEBUG(D_ERR, "URB packet length is smaller" " than the specified chunk length"); gspca_dev->last_packet_type = DISCARD_PACKET; return; } /* First byte seem to be 02=data 2nd byte is unknown??? */ if (sd->bridge == BRIDGE_ST6422 && (id & 0xff00) == 0x0200) goto frame_data; switch (id) { case 0x0200: case 0x4200: frame_data: PDEBUG(D_PACK, "Frame data packet detected"); if (sd->to_skip) { int skip = (sd->to_skip < chunk_len) ? sd->to_skip : chunk_len; data += skip; len -= skip; chunk_len -= skip; sd->to_skip -= skip; } gspca_frame_add(gspca_dev, INTER_PACKET, data, chunk_len); break; case 0x8001: case 0x8005: case 0xc001: case 0xc005: PDEBUG(D_PACK, "Starting new frame"); /* Create a new frame, chunk length should be zero */ gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); if (sd->bridge == BRIDGE_ST6422) sd->to_skip = gspca_dev->width * 4; if (chunk_len) PDEBUG(D_ERR, "Chunk length is " "non-zero on a SOF"); break; case 0x8002: case 0x8006: case 0xc002: PDEBUG(D_PACK, "End of frame detected"); /* Complete the last frame (if any) */ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); if (chunk_len) PDEBUG(D_ERR, "Chunk length is " "non-zero on a EOF"); break; case 0x0005: PDEBUG(D_PACK, "Chunk 0x005 detected"); /* Unknown chunk with 11 bytes of data, occurs just before end of each frame in compressed mode */ break; case 0x0100: PDEBUG(D_PACK, "Chunk 0x0100 detected"); /* Unknown chunk with 2 bytes of data, occurs 2-3 times per USB interrupt */ break; case 0x42ff: PDEBUG(D_PACK, "Chunk 0x42ff detected"); /* Special chunk seen sometimes on the ST6422 */ break; default: PDEBUG(D_PACK, "Unknown chunk 0x%04x detected", id); /* Unknown chunk */ } data += chunk_len; len -= chunk_len; } } #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet data */ int len) /* interrupt packet length */ { int ret = -EINVAL; if (len == 1 && data[0] == 0x80) { input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); input_sync(gspca_dev->input_dev); ret = 0; } if (len == 1 && data[0] == 0x88) { input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); input_sync(gspca_dev->input_dev); ret = 0; } return ret; } #endif static int stv06xx_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id); /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, .config = stv06xx_config, .init = stv06xx_init, .start = stv06xx_start, .stopN = stv06xx_stopN, .pkt_scan = stv06xx_pkt_scan, .isoc_init = stv06xx_isoc_init, .isoc_nego = stv06xx_isoc_nego, #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) .int_pkt_scan = sd_int_pkt_scan, #endif }; /* This function is called at probe time */ static int stv06xx_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; PDEBUG(D_PROBE, "Configuring camera"); cam = &gspca_dev->cam; sd->desc = sd_desc; sd->bridge = id->driver_info; gspca_dev->sd_desc = &sd->desc; if (dump_bridge) stv06xx_dump_bridge(sd); sd->sensor = &stv06xx_sensor_st6422; if (!sd->sensor->probe(sd)) return 0; sd->sensor = &stv06xx_sensor_vv6410; if (!sd->sensor->probe(sd)) return 0; sd->sensor = &stv06xx_sensor_hdcs1x00; if (!sd->sensor->probe(sd)) return 0; sd->sensor = &stv06xx_sensor_hdcs1020; if (!sd->sensor->probe(sd)) return 0; sd->sensor = &stv06xx_sensor_pb0100; if (!sd->sensor->probe(sd)) return 0; sd->sensor = NULL; return -ENODEV; } /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { /* QuickCam Express */ {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, /* LEGO cam / QuickCam Web */ {USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 }, /* Dexxa WebCam USB */ {USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 }, /* QuickCam Messenger */ {USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 }, /* QuickCam Communicate */ {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, /* QuickCam Messenger (new) */ {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, {} }; MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { PDEBUG(D_PROBE, "Probing for a stv06xx device"); return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), THIS_MODULE); } static void sd_disconnect(struct usb_interface *intf) { struct gspca_dev *gspca_dev = usb_get_intfdata(intf); struct sd *sd = (struct sd *) gspca_dev; PDEBUG(D_PROBE, "Disconnecting the stv06xx device"); if (sd->sensor->disconnect) sd->sensor->disconnect(sd); gspca_disconnect(intf); } static struct usb_driver sd_driver = { .name = MODULE_NAME, .id_table = device_table, .probe = sd_probe, .disconnect = sd_disconnect, #ifdef CONFIG_PM .suspend = gspca_suspend, .resume = gspca_resume, #endif }; /* -- module insert / remove -- */ static int __init sd_mod_init(void) { return usb_register(&sd_driver); } static void __exit sd_mod_exit(void) { usb_deregister(&sd_driver); } module_init(sd_mod_init); module_exit(sd_mod_exit); module_param(dump_bridge, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup"); module_param(dump_sensor, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(dump_sensor, "Dumps all sensor registers at startup");