# # Misc strange devices # menu "Misc devices" config SENSORS_LIS3LV02D tristate depends on INPUT select INPUT_POLLDEV default n config AD525X_DPOT tristate "Analog Devices Digital Potentiometers" depends on (I2C || SPI) && SYSFS help If you say yes here, you get support for the Analog Devices AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, AD5271, AD5272, AD5274 digital potentiometer chips. See Documentation/misc-devices/ad525x_dpot.txt for the userspace interface. This driver can also be built as a module. If so, the module will be called ad525x_dpot. config AD525X_DPOT_I2C tristate "support I2C bus connection" depends on AD525X_DPOT && I2C help Say Y here if you have a digital potentiometers hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called ad525x_dpot-i2c. config AD525X_DPOT_SPI tristate "support SPI bus connection" depends on AD525X_DPOT && SPI_MASTER help Say Y here if you have a digital potentiometers hooked to an SPI bus. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ad525x_dpot-spi. config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" depends on HAVE_CLK help This option enables device driver support for the PWM channels on certain Atmel processors. Pulse Width Modulation is used for purposes including software controlled power-efficient backlights on LCD displays, motor control, and waveform generation. config AB8500_PWM bool "AB8500 PWM support" depends on AB8500_CORE && ARCH_U8500 select HAVE_PWM help This driver exports functions to enable/disble/config/free Pulse Width Modulation in the Analog Baseband Chip AB8500. It is used by led and backlight driver to control the intensity. config ATMEL_TCLIB bool "Atmel AT32/AT91 Timer/Counter Library" depends on (AVR32 || ARCH_AT91) help Select this if you want a library to allocate the Timer/Counter blocks found on many Atmel processors. This facilitates using these blocks by different drivers despite processor differences. config ATMEL_TCB_CLKSRC bool "TC Block Clocksource" depends on ATMEL_TCLIB default y help Select this to get a high precision clocksource based on a TC block with a 5+ MHz base clock rate. Two timer channels are combined to make a single 32-bit timer. When GENERIC_CLOCKEVENTS is defined, the third timer channel may be used as a clock event device supporting oneshot mode (delays of up to two seconds) based on the 32 KiHz clock. config ATMEL_TCB_CLKSRC_BLOCK int depends on ATMEL_TCB_CLKSRC prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X default 0 range 0 1 help Some chips provide more than one TC block, so you have the choice of which one to use for the clock framework. The other TC can be used for other purposes, such as PWM generation and interval timing. config IBM_ASM tristate "Device driver for IBM RSA service processor" depends on X86 && PCI && INPUT && EXPERIMENTAL ---help--- This option enables device driver support for in-band access to the IBM RSA (Condor) service processor in eServer xSeries systems. The ibmasm device driver allows user space application to access ASM (Advanced Systems Management) functions on the service processor. The driver is meant to be used in conjunction with a user space API. The ibmasm driver also enables the OS to use the UART on the service processor board as a regular serial port. To make use of this feature serial driver support (CONFIG_SERIAL_8250) must be enabled. WARNING: This software may not be supported or function correctly on your IBM server. Please consult the IBM ServerProven website for information on the specific driver level and support statement for your IBM server. config PHANTOM tristate "Sensable PHANToM (PCI)" depends on PCI help Say Y here if you want to build a driver for Sensable PHANToM device. This driver is only for PCI PHANToMs. If you choose to build module, its name will be phantom. If unsure, say N here. config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" depends on PCI default n help The PTI (Parallel Trace Interface) driver directs trace data routed from various parts in the system out through an Intel Penwell PTI port and out of the mobile device for analysis with a debugging tool (Lauterbach or Fido). You should select this driver if the target kernel is meant for an Intel Atom (non-netbook) mobile device containing a MIPI P1149.7 standard implementation. config SGI_IOC4 tristate "SGI IOC4 Base IO support" depends on PCI ---help--- This option enables basic support for the IOC4 chip on certain SGI IO controller cards (IO9, IO10, and PCI-RT). This option does not enable any specific functions on such a card, but provides necessary infrastructure for other drivers to utilize. If you have an SGI Altix with an IOC4-based card say Y. Otherwise say N. config TIFM_CORE tristate "TI Flash Media interface support (EXPERIMENTAL)" depends on EXPERIMENTAL && PCI help If you want support for Texas Instruments(R) Flash Media adapters you should select this option and then also choose an appropriate host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter support', if you have a TI PCI74xx compatible card reader, for example. You will also have to select some flash card format drivers. MMC/SD cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD Interface support (MMC_TIFM_SD)'. To compile this driver as a module, choose M here: the module will be called tifm_core. config TIFM_7XX1 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" depends on PCI && TIFM_CORE && EXPERIMENTAL default TIFM_CORE help This option enables support for Texas Instruments(R) PCI74xx and PCI76xx families of Flash Media adapters, found in many laptops. To make actual use of the device, you will have to select some flash card format drivers, as outlined in the TIFM_CORE Help. To compile this driver as a module, choose M here: the module will be called tifm_7xx1. config ICS932S401 tristate "Integrated Circuits ICS932S401" depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Integrated Circuits ICS932S401 clock control chips. This driver can also be built as a module. If so, the module will be called ics932s401. config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" depends on AVR32 || ARCH_AT91 ---help--- This option enables device driver support for Atmel Synchronized Serial Communication peripheral (SSC). The SSC peripheral supports a wide variety of serial frame based communications, i.e. I2S, SPI, etc. If unsure, say N. config ENCLOSURE_SERVICES tristate "Enclosure Services" default n help Provides support for intelligent enclosures (bays which contain storage devices). You also need either a host driver (SCSI/ATA) which supports enclosures or a SCSI enclosure device (SES) to use these services. config SGI_XP tristate "Support communication between SGI SSIs" depends on NET depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select SGI_GRU if X86_64 && SMP ---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have hardware based memory protection from the others. Enabling this feature will allow for direct communication between SSIs based on a network adapter and DMA messaging. config CS5535_MFGPT tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" depends on PCI && X86 && MFD_CS5535 default n help This driver provides access to MFGPT functionality for other drivers that need timers. MFGPTs are available in the CS5535 and CS5536 companion chips that are found in AMD Geode and several other platforms. They have a better resolution and max interval than the generic PIT, and are suitable for use as high-res timers. You probably don't want to enable this manually; other drivers that make use of it should enable it. config CS5535_MFGPT_DEFAULT_IRQ int depends on CS5535_MFGPT default 7 help MFGPTs on the CS5535 require an interrupt. The selected IRQ can be overridden as a module option as well as by driver that use the cs5535_mfgpt_ API; however, different architectures might want to use a different IRQ by default. This is here for architectures to set as necessary. config CS5535_CLOCK_EVENT_SRC tristate "CS5535/CS5536 high-res timer (MFGPT) events" depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT help This driver provides a clock event source based on the MFGPT timer(s) in the CS5535 and CS5536 companion chips. MFGPTs have a better resolution and max interval than the generic PIT, and are suitable for use as high-res timers. config HP_ILO tristate "Channel interface driver for the HP iLO processor" depends on PCI default n help The channel interface driver allows applications to communicate with iLO management processors present on HP ProLiant servers. Upon loading, the driver creates /dev/hpilo/dXccbN files, which can be used to gather data from the management processor, via read and write system calls. To compile this driver as a module, choose M here: the module will be called hpilo. config SGI_GRU tristate "SGI GRU driver" depends on X86_UV && SMP default n select MMU_NOTIFIER ---help--- The GRU is a hardware resource located in the system chipset. The GRU contains memory that can be mmapped into the user address space. This memory is used to communicate with the GRU to perform functions such as load/store, scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user instructions using user virtual addresses. GRU instructions (ex., bcopy) use user virtual addresses for operands. If you are not running on a SGI UV system, say N. config SGI_GRU_DEBUG bool "SGI GRU driver debug" depends on SGI_GRU default n ---help--- This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. config APDS9802ALS tristate "Medfield Avago APDS9802 ALS Sensor module" depends on I2C help If you say yes here you get support for the ALS APDS9802 ambient light sensor. This driver can also be built as a module. If so, the module will be called apds9802als. config ISL29003 tristate "Intersil ISL29003 ambient light sensor" depends on I2C && SYSFS help If you say yes here you get support for the Intersil ISL29003 ambient light sensor. This driver can also be built as a module. If so, the module will be called isl29003. config ISL29020 tristate "Intersil ISL29020 ambient light sensor" depends on I2C help If you say yes here you get support for the Intersil ISL29020 ambient light sensor. This driver can also be built as a module. If so, the module will be called isl29020. config SENSORS_TSL2550 tristate "Taos TSL2550 ambient light sensor" depends on I2C && SYSFS help If you say yes here you get support for the Taos TSL2550 ambient light sensor. This driver can also be built as a module. If so, the module will be called tsl2550. config SENSORS_BH1780 tristate "ROHM BH1780GLI ambient light sensor" depends on I2C && SYSFS help If you say yes here you get support for the ROHM BH1780GLI ambient light sensor. This driver can also be built as a module. If so, the module will be called bh1780gli. config SENSORS_BH1770 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" depends on I2C ---help--- Say Y here if you want to build a driver for BH1770GLC (ROHM) or SFH7770 (Osram) combined ambient light and proximity sensor chip. To compile this driver as a module, choose M here: the module will be called bh1770glc. If unsure, say N here. config SENSORS_APDS990X tristate "APDS990X combined als and proximity sensors" depends on I2C default n ---help--- Say Y here if you want to build a driver for Avago APDS990x combined ambient light and proximity sensor chip. To compile this driver as a module, choose M here: the module will be called apds990x. If unsure, say N here. config HMC6352 tristate "Honeywell HMC6352 compass" depends on I2C help This driver provides support for the Honeywell HMC6352 compass, providing configuration and heading data via sysfs. config EP93XX_PWM tristate "EP93xx PWM support" depends on ARCH_EP93XX help This option enables device driver support for the PWM channels on the Cirrus EP93xx processors. The EP9307 chip only has one PWM channel all the others have two, the second channel is an alternate function of the EGPIO14 pin. A sysfs interface is provided to control the PWM channels. To compile this driver as a module, choose M here: the module will be called ep93xx_pwm. config DS1682 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" depends on I2C && EXPERIMENTAL help If you say yes here you get support for Dallas Semiconductor DS1682 Total Elapsed Time Recorder. This driver can also be built as a module. If so, the module will be called ds1682. config SPEAR13XX_PCIE_GADGET bool "PCIe gadget support for SPEAr13XX platform" depends on ARCH_SPEAR13XX default n help This option enables gadget support for PCIe controller. If board file defines any controller as PCIe endpoint then a sysfs entry will be created for that controller. User can use these sysfs node to configure PCIe EP as per his requirements. config TI_DAC7512 tristate "Texas Instruments DAC7512" depends on SPI && SYSFS help If you say yes here you get support for the Texas Instruments DAC7512 16-bit digital-to-analog converter. This driver can also be built as a module. If so, the module will be called ti_dac7512. config VMWARE_BALLOON tristate "VMware Balloon Driver" depends on X86 help This is VMware physical memory management driver which acts like a "balloon" that can be inflated to reclaim physical pages by reserving them in the guest and invalidating them in the monitor, freeing up the underlying machine pages so they can be allocated to other guests. The balloon can also be deflated to allow the guest to use more physical memory. If unsure, say N. To compile this driver as a module, choose M here: the module will be called vmw_balloon. config ARM_CHARLCD bool "ARM Ltd. Character LCD Driver" depends on PLAT_VERSATILE help This is a driver for the character LCD found on the ARM Ltd. Versatile and RealView Platform Baseboards. It doesn't do very much more than display the text "ARM Linux" on the first line and the Linux version on the second line, but that's still useful. config BMP085 tristate "BMP085 digital pressure sensor" depends on I2C && SYSFS help If you say yes here you get support for the Bosch Sensortec BMP085 digital pressure sensor. To compile this driver as a module, choose M here: the module will be called bmp085. config PCH_PHUB tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" depends on PCI help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded processor. The Topcliff has MAC address and Option ROM data in SROM. This driver can access MAC address and Option ROM data in SROM. This driver also can be used for LAPIS Semiconductor's IOH, ML7213/ML7223/ML7831. ML7213 which is for IVI(In-Vehicle Infotainment) use. ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general purpose use. ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. To compile this driver as a module, choose M here: the module will be called pch_phub. config USB_SWITCH_FSA9480 tristate "FSA9480 USB Switch" depends on I2C help The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully controlled using I2C and enables USB data, stereo and mono audio, video, microphone and UART data to use a common connector port. source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" endmenu