/* * linux/drivers/mmc/wbsd.c - Winbond W83L51xD SD/MMC driver * * Copyright (C) 2004-2005 Pierre Ossman, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * * Warning! * * Changes to the FIFO system should be done with extreme care since * the hardware is full of bugs related to the FIFO. Known issues are: * * - FIFO size field in FSR is always zero. * * - FIFO interrupts tend not to work as they should. Interrupts are * triggered only for full/empty events, not for threshold values. * * - On APIC systems the FIFO empty interrupt is sometimes lost. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "wbsd.h" #define DRIVER_NAME "wbsd" #define DRIVER_VERSION "1.2" #ifdef CONFIG_MMC_DEBUG #define DBG(x...) \ printk(KERN_DEBUG DRIVER_NAME ": " x) #define DBGF(f, x...) \ printk(KERN_DEBUG DRIVER_NAME " [%s()]: " f, __func__ , ##x) #else #define DBG(x...) do { } while (0) #define DBGF(x...) do { } while (0) #endif #ifdef CONFIG_MMC_DEBUG void DBG_REG(int reg, u8 value) { int i; printk(KERN_DEBUG "wbsd: Register %d: 0x%02X %3d '%c' ", reg, (int)value, (int)value, (value < 0x20)?'.':value); for (i = 7;i >= 0;i--) { if (value & (1 << i)) printk("x"); else printk("."); } printk("\n"); } #else #define DBG_REG(r, v) do {} while (0) #endif /* * Device resources */ #ifdef CONFIG_PNP static const struct pnp_device_id pnp_dev_table[] = { { "WEC0517", 0 }, { "WEC0518", 0 }, { "", 0 }, }; MODULE_DEVICE_TABLE(pnp, pnp_dev_table); #endif /* CONFIG_PNP */ #ifdef CONFIG_PNP static unsigned int nopnp = 0; #else static const unsigned int nopnp = 1; #endif static unsigned int io = 0x248; static unsigned int irq = 6; static int dma = 2; /* * Basic functions */ static inline void wbsd_unlock_config(struct wbsd_host* host) { BUG_ON(host->config == 0); outb(host->unlock_code, host->config); outb(host->unlock_code, host->config); } static inline void wbsd_lock_config(struct wbsd_host* host) { BUG_ON(host->config == 0); outb(LOCK_CODE, host->config); } static inline void wbsd_write_config(struct wbsd_host* host, u8 reg, u8 value) { BUG_ON(host->config == 0); outb(reg, host->config); outb(value, host->config + 1); } static inline u8 wbsd_read_config(struct wbsd_host* host, u8 reg) { BUG_ON(host->config == 0); outb(reg, host->config); return inb(host->config + 1); } static inline void wbsd_write_index(struct wbsd_host* host, u8 index, u8 value) { outb(index, host->base + WBSD_IDXR); outb(value, host->base + WBSD_DATAR); } static inline u8 wbsd_read_index(struct wbsd_host* host, u8 index) { outb(index, host->base + WBSD_IDXR); return inb(host->base + WBSD_DATAR); } /* * Common routines */ static void wbsd_init_device(struct wbsd_host* host) { u8 setup, ier; /* * Reset chip (SD/MMC part) and fifo. */ setup = wbsd_read_index(host, WBSD_IDX_SETUP); setup |= WBSD_FIFO_RESET | WBSD_SOFT_RESET; wbsd_write_index(host, WBSD_IDX_SETUP, setup); /* * Set DAT3 to input */ setup &= ~WBSD_DAT3_H; wbsd_write_index(host, WBSD_IDX_SETUP, setup); host->flags &= ~WBSD_FIGNORE_DETECT; /* * Read back default clock. */ host->clk = wbsd_read_index(host, WBSD_IDX_CLK); /* * Power down port. */ outb(WBSD_POWER_N, host->base + WBSD_CSR); /* * Set maximum timeout. */ wbsd_write_index(host, WBSD_IDX_TAAC, 0x7F); /* * Test for card presence */ if (inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT) host->flags |= WBSD_FCARD_PRESENT; else host->flags &= ~WBSD_FCARD_PRESENT; /* * Enable interesting interrupts. */ ier = 0; ier |= WBSD_EINT_CARD; ier |= WBSD_EINT_FIFO_THRE; ier |= WBSD_EINT_CCRC; ier |= WBSD_EINT_TIMEOUT; ier |= WBSD_EINT_CRC; ier |= WBSD_EINT_TC; outb(ier, host->base + WBSD_EIR); /* * Clear interrupts. */ inb(host->base + WBSD_ISR); } static void wbsd_reset(struct wbsd_host* host) { u8 setup; printk(KERN_ERR DRIVER_NAME ": Resetting chip\n"); /* * Soft reset of chip (SD/MMC part). */ setup = wbsd_read_index(host, WBSD_IDX_SETUP); setup |= WBSD_SOFT_RESET; wbsd_write_index(host, WBSD_IDX_SETUP, setup); } static void wbsd_request_end(struct wbsd_host* host, struct mmc_request* mrq) { unsigned long dmaflags; DBGF("Ending request, cmd (%x)\n", mrq->cmd->opcode); if (host->dma >= 0) { /* * Release ISA DMA controller. */ dmaflags = claim_dma_lock(); disable_dma(host->dma); clear_dma_ff(host->dma); release_dma_lock(dmaflags); /* * Disable DMA on host. */ wbsd_write_index(host, WBSD_IDX_DMA, 0); } host->mrq = NULL; /* * MMC layer might call back into the driver so first unlock. */ spin_unlock(&host->lock); mmc_request_done(host->mmc, mrq); spin_lock(&host->lock); } /* * Scatter/gather functions */ static inline void wbsd_init_sg(struct wbsd_host* host, struct mmc_data* data) { /* * Get info. about SG list from data structure. */ host->cur_sg = data->sg; host->num_sg = data->sg_len; host->offset = 0; host->remain = host->cur_sg->length; } static inline int wbsd_next_sg(struct wbsd_host* host) { /* * Skip to next SG entry. */ host->cur_sg++; host->num_sg--; /* * Any entries left? */ if (host->num_sg > 0) { host->offset = 0; host->remain = host->cur_sg->length; } return host->num_sg; } static inline char* wbsd_kmap_sg(struct wbsd_host* host) { host->mapped_sg = kmap_atomic(host->cur_sg->page, KM_BIO_SRC_IRQ) + host->cur_sg->offset; return host->mapped_sg; } static inline void wbsd_kunmap_sg(struct wbsd_host* host) { kunmap_atomic(host->mapped_sg, KM_BIO_SRC_IRQ); } static inline void wbsd_sg_to_dma(struct wbsd_host* host, struct mmc_data* data) { unsigned int len, i, size; struct scatterlist* sg; char* dmabuf = host->dma_buffer; char* sgbuf; size = host->size; sg = data->sg; len = data->sg_len; /* * Just loop through all entries. Size might not * be the entire list though so make sure that * we do not transfer too much. */ for (i = 0;i < len;i++) { sgbuf = kmap_atomic(sg[i].page, KM_BIO_SRC_IRQ) + sg[i].offset; if (size < sg[i].length) memcpy(dmabuf, sgbuf, size); else memcpy(dmabuf, sgbuf, sg[i].length); kunmap_atomic(sgbuf, KM_BIO_SRC_IRQ); dmabuf += sg[i].length; if (size < sg[i].length) size = 0; else size -= sg[i].length; if (size == 0) break; } /* * Check that we didn't get a request to transfer * more data than can fit into the SG list. */ BUG_ON(size != 0); host->size -= size; } static inline void wbsd_dma_to_sg(struct wbsd_host* host, struct mmc_data* data) { unsigned int len, i, size; struct scatterlist* sg; char* dmabuf = host->dma_buffer; char* sgbuf; size = host->size; sg = data->sg; len = data->sg_len; /* * Just loop through all entries. Size might not * be the entire list though so make sure that * we do not transfer too much. */ for (i = 0;i < len;i++) { sgbuf = kmap_atomic(sg[i].page, KM_BIO_SRC_IRQ) + sg[i].offset; if (size < sg[i].length) memcpy(sgbuf, dmabuf, size); else memcpy(sgbuf, dmabuf, sg[i].length); kunmap_atomic(sgbuf, KM_BIO_SRC_IRQ); dmabuf += sg[i].length; if (size < sg[i].length) size = 0; else size -= sg[i].length; if (size == 0) break; } /* * Check that we didn't get a request to transfer * more data than can fit into the SG list. */ BUG_ON(size != 0); host->size -= size; } /* * Command handling */ static inline void wbsd_get_short_reply(struct wbsd_host* host, struct mmc_command* cmd) { /* * Correct response type? */ if (wbsd_read_index(host, WBSD_IDX_RSPLEN) != WBSD_RSP_SHORT) { cmd->error = MMC_ERR_INVALID; return; } cmd->resp[0] = wbsd_read_index(host, WBSD_IDX_RESP12) << 24; cmd->resp[0] |= wbsd_read_index(host, WBSD_IDX_RESP13) << 16; cmd->resp[0] |= wbsd_read_index(host, WBSD_IDX_RESP14) << 8; cmd->resp[0] |= wbsd_read_index(host, WBSD_IDX_RESP15) << 0; cmd->resp[1] = wbsd_read_index(host, WBSD_IDX_RESP16) << 24; } static inline void wbsd_get_long_reply(struct wbsd_host* host, struct mmc_command* cmd) { int i; /* * Correct response type? */ if (wbsd_read_index(host, WBSD_IDX_RSPLEN) != WBSD_RSP_LONG) { cmd->error = MMC_ERR_INVALID; return; } for (i = 0;i < 4;i++) { cmd->resp[i] = wbsd_read_index(host, WBSD_IDX_RESP1 + i * 4) << 24; cmd->resp[i] |= wbsd_read_index(host, WBSD_IDX_RESP2 + i * 4) << 16; cmd->resp[i] |= wbsd_read_index(host, WBSD_IDX_RESP3 + i * 4) << 8; cmd->resp[i] |= wbsd_read_index(host, WBSD_IDX_RESP4 + i * 4) << 0; } } static void wbsd_send_command(struct wbsd_host* host, struct mmc_command* cmd) { int i; u8 status, isr; DBGF("Sending cmd (%x)\n", cmd->opcode); /* * Clear accumulated ISR. The interrupt routine * will fill this one with events that occur during * transfer. */ host->isr = 0; /* * Send the command (CRC calculated by host). */ outb(cmd->opcode, host->base + WBSD_CMDR); for (i = 3;i >= 0;i--) outb((cmd->arg >> (i * 8)) & 0xff, host->base + WBSD_CMDR); cmd->error = MMC_ERR_NONE; /* * Wait for the request to complete. */ do { status = wbsd_read_index(host, WBSD_IDX_STATUS); } while (status & WBSD_CARDTRAFFIC); /* * Do we expect a reply? */ if ((cmd->flags & MMC_RSP_MASK) != MMC_RSP_NONE) { /* * Read back status. */ isr = host->isr; /* Card removed? */ if (isr & WBSD_INT_CARD) cmd->error = MMC_ERR_TIMEOUT; /* Timeout? */ else if (isr & WBSD_INT_TIMEOUT) cmd->error = MMC_ERR_TIMEOUT; /* CRC? */ else if ((cmd->flags & MMC_RSP_CRC) && (isr & WBSD_INT_CRC)) cmd->error = MMC_ERR_BADCRC; /* All ok */ else { if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT) wbsd_get_short_reply(host, cmd); else wbsd_get_long_reply(host, cmd); } } DBGF("Sent cmd (%x), res %d\n", cmd->opcode, cmd->error); } /* * Data functions */ static void wbsd_empty_fifo(struct wbsd_host* host) { struct mmc_data* data = host->mrq->cmd->data; char* buffer; int i, fsr, fifo; /* * Handle excessive data. */ if (data->bytes_xfered == host->size) return; buffer = wbsd_kmap_sg(host) + host->offset; /* * Drain the fifo. This has a tendency to loop longer * than the FIFO length (usually one block). */ while (!((fsr = inb(host->base + WBSD_FSR)) & WBSD_FIFO_EMPTY)) { /* * The size field in the FSR is broken so we have to * do some guessing. */ if (fsr & WBSD_FIFO_FULL) fifo = 16; else if (fsr & WBSD_FIFO_FUTHRE) fifo = 8; else fifo = 1; for (i = 0;i < fifo;i++) { *buffer = inb(host->base + WBSD_DFR); buffer++; host->offset++; host->remain--; data->bytes_xfered++; /* * Transfer done? */ if (data->bytes_xfered == host->size) { wbsd_kunmap_sg(host); return; } /* * End of scatter list entry? */ if (host->remain == 0) { wbsd_kunmap_sg(host); /* * Get next entry. Check if last. */ if (!wbsd_next_sg(host)) { /* * We should never reach this point. * It means that we're trying to * transfer more blocks than can fit * into the scatter list. */ BUG_ON(1); host->size = data->bytes_xfered; return; } buffer = wbsd_kmap_sg(host); } } } wbsd_kunmap_sg(host); /* * This is a very dirty hack to solve a * hardware problem. The chip doesn't trigger * FIFO threshold interrupts properly. */ if ((host->size - data->bytes_xfered) < 16) tasklet_schedule(&host->fifo_tasklet); } static void wbsd_fill_fifo(struct wbsd_host* host) { struct mmc_data* data = host->mrq->cmd->data; char* buffer; int i, fsr, fifo; /* * Check that we aren't being called after the * entire buffer has been transfered. */ if (data->bytes_xfered == host->size) return; buffer = wbsd_kmap_sg(host) + host->offset; /* * Fill the fifo. This has a tendency to loop longer * than the FIFO length (usually one block). */ while (!((fsr = inb(host->base + WBSD_FSR)) & WBSD_FIFO_FULL)) { /* * The size field in the FSR is broken so we have to * do some guessing. */ if (fsr & WBSD_FIFO_EMPTY) fifo = 0; else if (fsr & WBSD_FIFO_EMTHRE) fifo = 8; else fifo = 15; for (i = 16;i > fifo;i--) { outb(*buffer, host->base + WBSD_DFR); buffer++; host->offset++; host->remain--; data->bytes_xfered++; /* * Transfer done? */ if (data->bytes_xfered == host->size) { wbsd_kunmap_sg(host); return; } /* * End of scatter list entry? */ if (host->remain == 0) { wbsd_kunmap_sg(host); /* * Get next entry. Check if last. */ if (!wbsd_next_sg(host)) { /* * We should never reach this point. * It means that we're trying to * transfer more blocks than can fit * into the scatter list. */ BUG_ON(1); host->size = data->bytes_xfered; return; } buffer = wbsd_kmap_sg(host); } } } wbsd_kunmap_sg(host); /* * The controller stops sending interrupts for * 'FIFO empty' under certain conditions. So we * need to be a bit more pro-active. */ tasklet_schedule(&host->fifo_tasklet); } static void wbsd_prepare_data(struct wbsd_host* host, struct mmc_data* data) { u16 blksize; u8 setup; unsigned long dmaflags; DBGF("blksz %04x blks %04x flags %08x\n", 1 << data->blksz_bits, data->blocks, data->flags); DBGF("tsac %d ms nsac %d clk\n", data->timeout_ns / 1000000, data->timeout_clks); /* * Calculate size. */ host->size = data->blocks << data->blksz_bits; /* * Check timeout values for overflow. * (Yes, some cards cause this value to overflow). */ if (data->timeout_ns > 127000000) wbsd_write_index(host, WBSD_IDX_TAAC, 127); else wbsd_write_index(host, WBSD_IDX_TAAC, data->timeout_ns/1000000); if (data->timeout_clks > 255) wbsd_write_index(host, WBSD_IDX_NSAC, 255); else wbsd_write_index(host, WBSD_IDX_NSAC, data->timeout_clks); /* * Inform the chip of how large blocks will be * sent. It needs this to determine when to * calculate CRC. * * Space for CRC must be included in the size. */ blksize = (1 << data->blksz_bits) + 2; wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0); wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF); /* * Clear the FIFO. This is needed even for DMA * transfers since the chip still uses the FIFO * internally. */ setup = wbsd_read_index(host, WBSD_IDX_SETUP); setup |= WBSD_FIFO_RESET; wbsd_write_index(host, WBSD_IDX_SETUP, setup); /* * DMA transfer? */ if (host->dma >= 0) { /* * The buffer for DMA is only 64 kB. */ BUG_ON(host->size > 0x10000); if (host->size > 0x10000) { data->error = MMC_ERR_INVALID; return; } /* * Transfer data from the SG list to * the DMA buffer. */ if (data->flags & MMC_DATA_WRITE) wbsd_sg_to_dma(host, data); /* * Initialise the ISA DMA controller. */ dmaflags = claim_dma_lock(); disable_dma(host->dma); clear_dma_ff(host->dma); if (data->flags & MMC_DATA_READ) set_dma_mode(host->dma, DMA_MODE_READ & ~0x40); else set_dma_mode(host->dma, DMA_MODE_WRITE & ~0x40); set_dma_addr(host->dma, host->dma_addr); set_dma_count(host->dma, host->size); enable_dma(host->dma); release_dma_lock(dmaflags); /* * Enable DMA on the host. */ wbsd_write_index(host, WBSD_IDX_DMA, WBSD_DMA_ENABLE); } else { /* * This flag is used to keep printk * output to a minimum. */ host->firsterr = 1; /* * Initialise the SG list. */ wbsd_init_sg(host, data); /* * Turn off DMA. */ wbsd_write_index(host, WBSD_IDX_DMA, 0); /* * Set up FIFO threshold levels (and fill * buffer if doing a write). */ if (data->flags & MMC_DATA_READ) { wbsd_write_index(host, WBSD_IDX_FIFOEN, WBSD_FIFOEN_FULL | 8); } else { wbsd_write_index(host, WBSD_IDX_FIFOEN, WBSD_FIFOEN_EMPTY | 8); wbsd_fill_fifo(host); } } data->error = MMC_ERR_NONE; } static void wbsd_finish_data(struct wbsd_host* host, struct mmc_data* data) { unsigned long dmaflags; int count; u8 status; WARN_ON(host->mrq == NULL); /* * Send a stop command if needed. */ if (data->stop) wbsd_send_command(host, data->stop); /* * Wait for the controller to leave data * transfer state. */ do { status = wbsd_read_index(host, WBSD_IDX_STATUS); } while (status & (WBSD_BLOCK_READ | WBSD_BLOCK_WRITE)); /* * DMA transfer? */ if (host->dma >= 0) { /* * Disable DMA on the host. */ wbsd_write_index(host, WBSD_IDX_DMA, 0); /* * Turn of ISA DMA controller. */ dmaflags = claim_dma_lock(); disable_dma(host->dma); clear_dma_ff(host->dma); count = get_dma_residue(host->dma); release_dma_lock(dmaflags); /* * Any leftover data? */ if (count) { printk(KERN_ERR DRIVER_NAME ": Incomplete DMA " "transfer. %d bytes left.\n", count); data->error = MMC_ERR_FAILED; } else { /* * Transfer data from DMA buffer to * SG list. */ if (data->flags & MMC_DATA_READ) wbsd_dma_to_sg(host, data); data->bytes_xfered = host->size; } } DBGF("Ending data transfer (%d bytes)\n", data->bytes_xfered); wbsd_request_end(host, host->mrq); } /*****************************************************************************\ * * * MMC layer callbacks * * * \*****************************************************************************/ static void wbsd_request(struct mmc_host* mmc, struct mmc_request* mrq) { struct wbsd_host* host = mmc_priv(mmc); struct mmc_command* cmd; /* * Disable tasklets to avoid a deadlock. */ spin_lock_bh(&host->lock); BUG_ON(host->mrq != NULL); cmd = mrq->cmd; host->mrq = mrq; /* * If there is no card in the slot then * timeout immediatly. */ if (!(host->flags & WBSD_FCARD_PRESENT)) { cmd->error = MMC_ERR_TIMEOUT; goto done; } /* * Does the request include data? */ if (cmd->data) { wbsd_prepare_data(host, cmd->data); if (cmd->data->error != MMC_ERR_NONE) goto done; } wbsd_send_command(host, cmd); /* * If this is a data transfer the request * will be finished after the data has * transfered. */ if (cmd->data && (cmd->error == MMC_ERR_NONE)) { /* * Dirty fix for hardware bug. */ if (host->dma == -1) tasklet_schedule(&host->fifo_tasklet); spin_unlock_bh(&host->lock); return; } done: wbsd_request_end(host, mrq); spin_unlock_bh(&host->lock); } static void wbsd_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) { struct wbsd_host* host = mmc_priv(mmc); u8 clk, setup, pwr; DBGF("clock %uHz busmode %u powermode %u Vdd %u\n", ios->clock, ios->bus_mode, ios->power_mode, ios->vdd); spin_lock_bh(&host->lock); /* * Reset the chip on each power off. * Should clear out any weird states. */ if (ios->power_mode == MMC_POWER_OFF) wbsd_init_device(host); if (ios->clock >= 24000000) clk = WBSD_CLK_24M; else if (ios->clock >= 16000000) clk = WBSD_CLK_16M; else if (ios->clock >= 12000000) clk = WBSD_CLK_12M; else clk = WBSD_CLK_375K; /* * Only write to the clock register when * there is an actual change. */ if (clk != host->clk) { wbsd_write_index(host, WBSD_IDX_CLK, clk); host->clk = clk; } /* * Power up card. */ if (ios->power_mode != MMC_POWER_OFF) { pwr = inb(host->base + WBSD_CSR); pwr &= ~WBSD_POWER_N; outb(pwr, host->base + WBSD_CSR); } /* * MMC cards need to have pin 1 high during init. * Init time corresponds rather nicely with the bus mode. * It wreaks havoc with the card detection though so * that needs to be disabed. */ setup = wbsd_read_index(host, WBSD_IDX_SETUP); if ((ios->power_mode == MMC_POWER_ON) && (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)) { setup |= WBSD_DAT3_H; host->flags |= WBSD_FIGNORE_DETECT; } else { setup &= ~WBSD_DAT3_H; host->flags &= ~WBSD_FIGNORE_DETECT; } wbsd_write_index(host, WBSD_IDX_SETUP, setup); spin_unlock_bh(&host->lock); } static struct mmc_host_ops wbsd_ops = { .request = wbsd_request, .set_ios = wbsd_set_ios, }; /*****************************************************************************\ * * * Interrupt handling * * * \*****************************************************************************/ /* * Helper function for card detection */ static void wbsd_detect_card(unsigned long data) { struct wbsd_host *host = (struct wbsd_host*)data; BUG_ON(host == NULL); DBG("Executing card detection\n"); mmc_detect_change(host->mmc); } /* * Tasklets */ inline static struct mmc_data* wbsd_get_data(struct wbsd_host* host) { WARN_ON(!host->mrq); if (!host->mrq) return NULL; WARN_ON(!host->mrq->cmd); if (!host->mrq->cmd) return NULL; WARN_ON(!host->mrq->cmd->data); if (!host->mrq->cmd->data) return NULL; return host->mrq->cmd->data; } static void wbsd_tasklet_card(unsigned long param) { struct wbsd_host* host = (struct wbsd_host*)param; u8 csr; spin_lock(&host->lock); if (host->flags & WBSD_FIGNORE_DETECT) { spin_unlock(&host->lock); return; } csr = inb(host->base + WBSD_CSR); WARN_ON(csr == 0xff); if (csr & WBSD_CARDPRESENT) { if (!(host->flags & WBSD_FCARD_PRESENT)) { DBG("Card inserted\n"); host->flags |= WBSD_FCARD_PRESENT; /* * Delay card detection to allow electrical connections * to stabilise. */ mod_timer(&host->timer, jiffies + HZ/2); } spin_unlock(&host->lock); } else if (host->flags & WBSD_FCARD_PRESENT) { DBG("Card removed\n"); host->flags &= ~WBSD_FCARD_PRESENT; if (host->mrq) { printk(KERN_ERR DRIVER_NAME ": Card removed during transfer!\n"); wbsd_reset(host); host->mrq->cmd->error = MMC_ERR_FAILED; tasklet_schedule(&host->finish_tasklet); } /* * Unlock first since we might get a call back. */ spin_unlock(&host->lock); mmc_detect_change(host->mmc); } } static void wbsd_tasklet_fifo(unsigned long param) { struct wbsd_host* host = (struct wbsd_host*)param; struct mmc_data* data; spin_lock(&host->lock); if (!host->mrq) goto end; data = wbsd_get_data(host); if (!data) goto end; if (data->flags & MMC_DATA_WRITE) wbsd_fill_fifo(host); else wbsd_empty_fifo(host); /* * Done? */ if (host->size == data->bytes_xfered) { wbsd_write_index(host, WBSD_IDX_FIFOEN, 0); tasklet_schedule(&host->finish_tasklet); } end: spin_unlock(&host->lock); } static void wbsd_tasklet_crc(unsigned long param) { struct wbsd_host* host = (struct wbsd_host*)param; struct mmc_data* data; spin_lock(&host->lock); if (!host->mrq) goto end; data = wbsd_get_data(host); if (!data) goto end; DBGF("CRC error\n"); data->error = MMC_ERR_BADCRC; tasklet_schedule(&host->finish_tasklet); end: spin_unlock(&host->lock); } static void wbsd_tasklet_timeout(unsigned long param) { struct wbsd_host* host = (struct wbsd_host*)param; struct mmc_data* data; spin_lock(&host->lock); if (!host->mrq) goto end; data = wbsd_get_data(host); if (!data) goto end; DBGF("Timeout\n"); data->error = MMC_ERR_TIMEOUT; tasklet_schedule(&host->finish_tasklet); end: spin_unlock(&host->lock); } static void wbsd_tasklet_finish(unsigned long param) { struct wbsd_host* host = (struct wbsd_host*)param; struct mmc_data* data; spin_lock(&host->lock); WARN_ON(!host->mrq); if (!host->mrq) goto end; data = wbsd_get_data(host); if (!data) goto end; wbsd_finish_data(host, data); end: spin_unlock(&host->lock); } static void wbsd_tasklet_block(unsigned long param) { struct wbsd_host* host = (struct wbsd_host*)param; struct mmc_data* data; spin_lock(&host->lock); if ((wbsd_read_index(host, WBSD_IDX_CRCSTATUS) & WBSD_CRC_MASK) != WBSD_CRC_OK) { data = wbsd_get_data(host); if (!data) goto end; DBGF("CRC error\n"); data->error = MMC_ERR_BADCRC; tasklet_schedule(&host->finish_tasklet); } end: spin_unlock(&host->lock); } /* * Interrupt handling */ static irqreturn_t wbsd_irq(int irq, void *dev_id, struct pt_regs *regs) { struct wbsd_host* host = dev_id; int isr; isr = inb(host->base + WBSD_ISR); /* * Was it actually our hardware that caused the interrupt? */ if (isr == 0xff || isr == 0x00) return IRQ_NONE; host->isr |= isr; /* * Schedule tasklets as needed. */ if (isr & WBSD_INT_CARD) tasklet_schedule(&host->card_tasklet); if (isr & WBSD_INT_FIFO_THRE) tasklet_schedule(&host->fifo_tasklet); if (isr & WBSD_INT_CRC) tasklet_hi_schedule(&host->crc_tasklet); if (isr & WBSD_INT_TIMEOUT) tasklet_hi_schedule(&host->timeout_tasklet); if (isr & WBSD_INT_BUSYEND) tasklet_hi_schedule(&host->block_tasklet); if (isr & WBSD_INT_TC) tasklet_schedule(&host->finish_tasklet); return IRQ_HANDLED; } /*****************************************************************************\ * * * Device initialisation and shutdown * * * \*****************************************************************************/ /* * Allocate/free MMC structure. */ static int __devinit wbsd_alloc_mmc(struct device* dev) { struct mmc_host* mmc; struct wbsd_host* host; /* * Allocate MMC structure. */ mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev); if (!mmc) return -ENOMEM; host = mmc_priv(mmc); host->mmc = mmc; host->dma = -1; /* * Set host parameters. */ mmc->ops = &wbsd_ops; mmc->f_min = 375000; mmc->f_max = 24000000; mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; spin_lock_init(&host->lock); /* * Set up detection timer */ init_timer(&host->timer); host->timer.data = (unsigned long)host; host->timer.function = wbsd_detect_card; /* * Maximum number of segments. Worst case is one sector per segment * so this will be 64kB/512. */ mmc->max_hw_segs = 128; mmc->max_phys_segs = 128; /* * Maximum number of sectors in one transfer. Also limited by 64kB * buffer. */ mmc->max_sectors = 128; /* * Maximum segment size. Could be one segment with the maximum number * of segments. */ mmc->max_seg_size = mmc->max_sectors * 512; dev_set_drvdata(dev, mmc); return 0; } static void __devexit wbsd_free_mmc(struct device* dev) { struct mmc_host* mmc; struct wbsd_host* host; mmc = dev_get_drvdata(dev); if (!mmc) return; host = mmc_priv(mmc); BUG_ON(host == NULL); del_timer_sync(&host->timer); mmc_free_host(mmc); dev_set_drvdata(dev, NULL); } /* * Scan for known chip id:s */ static int __devinit wbsd_scan(struct wbsd_host* host) { int i, j, k; int id; /* * Iterate through all ports, all codes to * find hardware that is in our known list. */ for (i = 0;i < sizeof(config_ports)/sizeof(int);i++) { if (!request_region(config_ports[i], 2, DRIVER_NAME)) continue; for (j = 0;j < sizeof(unlock_codes)/sizeof(int);j++) { id = 0xFFFF; outb(unlock_codes[j], config_ports[i]); outb(unlock_codes[j], config_ports[i]); outb(WBSD_CONF_ID_HI, config_ports[i]); id = inb(config_ports[i] + 1) << 8; outb(WBSD_CONF_ID_LO, config_ports[i]); id |= inb(config_ports[i] + 1); for (k = 0;k < sizeof(valid_ids)/sizeof(int);k++) { if (id == valid_ids[k]) { host->chip_id = id; host->config = config_ports[i]; host->unlock_code = unlock_codes[i]; return 0; } } if (id != 0xFFFF) { DBG("Unknown hardware (id %x) found at %x\n", id, config_ports[i]); } outb(LOCK_CODE, config_ports[i]); } release_region(config_ports[i], 2); } return -ENODEV; } /* * Allocate/free io port ranges */ static int __devinit wbsd_request_region(struct wbsd_host* host, int base) { if (io & 0x7) return -EINVAL; if (!request_region(base, 8, DRIVER_NAME)) return -EIO; host->base = io; return 0; } static void __devexit wbsd_release_regions(struct wbsd_host* host) { if (host->base) release_region(host->base, 8); host->base = 0; if (host->config) release_region(host->config, 2); host->config = 0; } /* * Allocate/free DMA port and buffer */ static void __devinit wbsd_request_dma(struct wbsd_host* host, int dma) { if (dma < 0) return; if (request_dma(dma, DRIVER_NAME)) goto err; /* * We need to allocate a special buffer in * order for ISA to be able to DMA to it. */ host->dma_buffer = kmalloc(WBSD_DMA_SIZE, GFP_NOIO | GFP_DMA | __GFP_REPEAT | __GFP_NOWARN); if (!host->dma_buffer) goto free; /* * Translate the address to a physical address. */ host->dma_addr = dma_map_single(host->mmc->dev, host->dma_buffer, WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); /* * ISA DMA must be aligned on a 64k basis. */ if ((host->dma_addr & 0xffff) != 0) goto kfree; /* * ISA cannot access memory above 16 MB. */ else if (host->dma_addr >= 0x1000000) goto kfree; host->dma = dma; return; kfree: /* * If we've gotten here then there is some kind of alignment bug */ BUG_ON(1); dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); host->dma_addr = (dma_addr_t)NULL; kfree(host->dma_buffer); host->dma_buffer = NULL; free: free_dma(dma); err: printk(KERN_WARNING DRIVER_NAME ": Unable to allocate DMA %d. " "Falling back on FIFO.\n", dma); } static void __devexit wbsd_release_dma(struct wbsd_host* host) { if (host->dma_addr) dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); if (host->dma_buffer) kfree(host->dma_buffer); if (host->dma >= 0) free_dma(host->dma); host->dma = -1; host->dma_buffer = NULL; host->dma_addr = (dma_addr_t)NULL; } /* * Allocate/free IRQ. */ static int __devinit wbsd_request_irq(struct wbsd_host* host, int irq) { int ret; /* * Allocate interrupt. */ ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host); if (ret) return ret; host->irq = irq; /* * Set up tasklets. */ tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); tasklet_init(&host->fifo_tasklet, wbsd_tasklet_fifo, (unsigned long)host); tasklet_init(&host->crc_tasklet, wbsd_tasklet_crc, (unsigned long)host); tasklet_init(&host->timeout_tasklet, wbsd_tasklet_timeout, (unsigned long)host); tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); tasklet_init(&host->block_tasklet, wbsd_tasklet_block, (unsigned long)host); return 0; } static void __devexit wbsd_release_irq(struct wbsd_host* host) { if (!host->irq) return; free_irq(host->irq, host); host->irq = 0; tasklet_kill(&host->card_tasklet); tasklet_kill(&host->fifo_tasklet); tasklet_kill(&host->crc_tasklet); tasklet_kill(&host->timeout_tasklet); tasklet_kill(&host->finish_tasklet); tasklet_kill(&host->block_tasklet); } /* * Allocate all resources for the host. */ static int __devinit wbsd_request_resources(struct wbsd_host* host, int base, int irq, int dma) { int ret; /* * Allocate I/O ports. */ ret = wbsd_request_region(host, base); if (ret) return ret; /* * Allocate interrupt. */ ret = wbsd_request_irq(host, irq); if (ret) return ret; /* * Allocate DMA. */ wbsd_request_dma(host, dma); return 0; } /* * Release all resources for the host. */ static void __devexit wbsd_release_resources(struct wbsd_host* host) { wbsd_release_dma(host); wbsd_release_irq(host); wbsd_release_regions(host); } /* * Configure the resources the chip should use. */ static void __devinit wbsd_chip_config(struct wbsd_host* host) { /* * Reset the chip. */ wbsd_write_config(host, WBSD_CONF_SWRST, 1); wbsd_write_config(host, WBSD_CONF_SWRST, 0); /* * Select SD/MMC function. */ wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); /* * Set up card detection. */ wbsd_write_config(host, WBSD_CONF_PINS, WBSD_PINS_DETECT_GP11); /* * Configure chip */ wbsd_write_config(host, WBSD_CONF_PORT_HI, host->base >> 8); wbsd_write_config(host, WBSD_CONF_PORT_LO, host->base & 0xff); wbsd_write_config(host, WBSD_CONF_IRQ, host->irq); if (host->dma >= 0) wbsd_write_config(host, WBSD_CONF_DRQ, host->dma); /* * Enable and power up chip. */ wbsd_write_config(host, WBSD_CONF_ENABLE, 1); wbsd_write_config(host, WBSD_CONF_POWER, 0x20); } /* * Check that configured resources are correct. */ static int __devinit wbsd_chip_validate(struct wbsd_host* host) { int base, irq, dma; /* * Select SD/MMC function. */ wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); /* * Read configuration. */ base = wbsd_read_config(host, WBSD_CONF_PORT_HI) << 8; base |= wbsd_read_config(host, WBSD_CONF_PORT_LO); irq = wbsd_read_config(host, WBSD_CONF_IRQ); dma = wbsd_read_config(host, WBSD_CONF_DRQ); /* * Validate against given configuration. */ if (base != host->base) return 0; if (irq != host->irq) return 0; if ((dma != host->dma) && (host->dma != -1)) return 0; return 1; } /*****************************************************************************\ * * * Devices setup and shutdown * * * \*****************************************************************************/ static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma, int pnp) { struct wbsd_host* host = NULL; struct mmc_host* mmc = NULL; int ret; ret = wbsd_alloc_mmc(dev); if (ret) return ret; mmc = dev_get_drvdata(dev); host = mmc_priv(mmc); /* * Scan for hardware. */ ret = wbsd_scan(host); if (ret) { if (pnp && (ret == -ENODEV)) { printk(KERN_WARNING DRIVER_NAME ": Unable to confirm device presence. You may " "experience lock-ups.\n"); } else { wbsd_free_mmc(dev); return ret; } } /* * Request resources. */ ret = wbsd_request_resources(host, io, irq, dma); if (ret) { wbsd_release_resources(host); wbsd_free_mmc(dev); return ret; } /* * See if chip needs to be configured. */ if (pnp && (host->config != 0)) { if (!wbsd_chip_validate(host)) { printk(KERN_WARNING DRIVER_NAME ": PnP active but chip not configured! " "You probably have a buggy BIOS. " "Configuring chip manually.\n"); wbsd_chip_config(host); } } else wbsd_chip_config(host); /* * Power Management stuff. No idea how this works. * Not tested. */ #ifdef CONFIG_PM if (host->config) wbsd_write_config(host, WBSD_CONF_PME, 0xA0); #endif /* * Allow device to initialise itself properly. */ mdelay(5); /* * Reset the chip into a known state. */ wbsd_init_device(host); mmc_add_host(mmc); printk(KERN_INFO "%s: W83L51xD", mmc->host_name); if (host->chip_id != 0) printk(" id %x", (int)host->chip_id); printk(" at 0x%x irq %d", (int)host->base, (int)host->irq); if (host->dma >= 0) printk(" dma %d", (int)host->dma); else printk(" FIFO"); if (pnp) printk(" PnP"); printk("\n"); return 0; } static void __devexit wbsd_shutdown(struct device* dev, int pnp) { struct mmc_host* mmc = dev_get_drvdata(dev); struct wbsd_host* host; if (!mmc) return; host = mmc_priv(mmc); mmc_remove_host(mmc); if (!pnp) { /* * Power down the SD/MMC function. */ wbsd_unlock_config(host); wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); wbsd_write_config(host, WBSD_CONF_ENABLE, 0); wbsd_lock_config(host); } wbsd_release_resources(host); wbsd_free_mmc(dev); } /* * Non-PnP */ static int __devinit wbsd_probe(struct device* dev) { return wbsd_init(dev, io, irq, dma, 0); } static int __devexit wbsd_remove(struct device* dev) { wbsd_shutdown(dev, 0); return 0; } /* * PnP */ #ifdef CONFIG_PNP static int __devinit wbsd_pnp_probe(struct pnp_dev * pnpdev, const struct pnp_device_id *dev_id) { int io, irq, dma; /* * Get resources from PnP layer. */ io = pnp_port_start(pnpdev, 0); irq = pnp_irq(pnpdev, 0); if (pnp_dma_valid(pnpdev, 0)) dma = pnp_dma(pnpdev, 0); else dma = -1; DBGF("PnP resources: port %3x irq %d dma %d\n", io, irq, dma); return wbsd_init(&pnpdev->dev, io, irq, dma, 1); } static void __devexit wbsd_pnp_remove(struct pnp_dev * dev) { wbsd_shutdown(&dev->dev, 1); } #endif /* CONFIG_PNP */ /* * Power management */ #ifdef CONFIG_PM static int wbsd_suspend(struct device *dev, pm_message_t state, u32 level) { DBGF("Not yet supported\n"); return 0; } static int wbsd_resume(struct device *dev, u32 level) { DBGF("Not yet supported\n"); return 0; } #else #define wbsd_suspend NULL #define wbsd_resume NULL #endif static struct platform_device *wbsd_device; static struct device_driver wbsd_driver = { .name = DRIVER_NAME, .bus = &platform_bus_type, .probe = wbsd_probe, .remove = wbsd_remove, .suspend = wbsd_suspend, .resume = wbsd_resume, }; #ifdef CONFIG_PNP static struct pnp_driver wbsd_pnp_driver = { .name = DRIVER_NAME, .id_table = pnp_dev_table, .probe = wbsd_pnp_probe, .remove = wbsd_pnp_remove, }; #endif /* CONFIG_PNP */ /* * Module loading/unloading */ static int __init wbsd_drv_init(void) { int result; printk(KERN_INFO DRIVER_NAME ": Winbond W83L51xD SD/MMC card interface driver, " DRIVER_VERSION "\n"); printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); #ifdef CONFIG_PNP if (!nopnp) { result = pnp_register_driver(&wbsd_pnp_driver); if (result < 0) return result; } #endif /* CONFIG_PNP */ if (nopnp) { result = driver_register(&wbsd_driver); if (result < 0) return result; wbsd_device = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); if (IS_ERR(wbsd_device)) return PTR_ERR(wbsd_device); } return 0; } static void __exit wbsd_drv_exit(void) { #ifdef CONFIG_PNP if (!nopnp) pnp_unregister_driver(&wbsd_pnp_driver); #endif /* CONFIG_PNP */ if (nopnp) { platform_device_unregister(wbsd_device); driver_unregister(&wbsd_driver); } DBG("unloaded\n"); } module_init(wbsd_drv_init); module_exit(wbsd_drv_exit); #ifdef CONFIG_PNP module_param(nopnp, uint, 0444); #endif module_param(io, uint, 0444); module_param(irq, uint, 0444); module_param(dma, int, 0444); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver"); MODULE_VERSION(DRIVER_VERSION); #ifdef CONFIG_PNP MODULE_PARM_DESC(nopnp, "Scan for device instead of relying on PNP. (default 0)"); #endif MODULE_PARM_DESC(io, "I/O base to allocate. Must be 8 byte aligned. (default 0x248)"); MODULE_PARM_DESC(irq, "IRQ to allocate. (default 6)"); MODULE_PARM_DESC(dma, "DMA channel to allocate. -1 for no DMA. (default 2)");