/* * Micrel KS8695 (Centaur) Ethernet. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * Copyright 2008 Simtec Electronics * Daniel Silverstone * Vincent Sanders */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ks8695net.h" #define MODULENAME "ks8695_ether" #define MODULEVERSION "1.01" /* * Transmit and device reset timeout, default 5 seconds. */ static int watchdog = 5000; /* Hardware structures */ /** * struct rx_ring_desc - Receive descriptor ring element * @status: The status of the descriptor element (E.g. who owns it) * @length: The number of bytes in the block pointed to by data_ptr * @data_ptr: The physical address of the data block to receive into * @next_desc: The physical address of the next descriptor element. */ struct rx_ring_desc { __le32 status; __le32 length; __le32 data_ptr; __le32 next_desc; }; /** * struct tx_ring_desc - Transmit descriptor ring element * @owner: Who owns the descriptor * @status: The number of bytes in the block pointed to by data_ptr * @data_ptr: The physical address of the data block to receive into * @next_desc: The physical address of the next descriptor element. */ struct tx_ring_desc { __le32 owner; __le32 status; __le32 data_ptr; __le32 next_desc; }; /** * struct ks8695_skbuff - sk_buff wrapper for rx/tx rings. * @skb: The buffer in the ring * @dma_ptr: The mapped DMA pointer of the buffer * @length: The number of bytes mapped to dma_ptr */ struct ks8695_skbuff { struct sk_buff *skb; dma_addr_t dma_ptr; u32 length; }; /* Private device structure */ #define MAX_TX_DESC 8 #define MAX_TX_DESC_MASK 0x7 #define MAX_RX_DESC 16 #define MAX_RX_DESC_MASK 0xf #define MAX_RXBUF_SIZE 0x700 #define TX_RING_DMA_SIZE (sizeof(struct tx_ring_desc) * MAX_TX_DESC) #define RX_RING_DMA_SIZE (sizeof(struct rx_ring_desc) * MAX_RX_DESC) #define RING_DMA_SIZE (TX_RING_DMA_SIZE + RX_RING_DMA_SIZE) /** * enum ks8695_dtype - Device type * @KS8695_DTYPE_WAN: This device is a WAN interface * @KS8695_DTYPE_LAN: This device is a LAN interface * @KS8695_DTYPE_HPNA: This device is an HPNA interface */ enum ks8695_dtype { KS8695_DTYPE_WAN, KS8695_DTYPE_LAN, KS8695_DTYPE_HPNA, }; /** * struct ks8695_priv - Private data for the KS8695 Ethernet * @in_suspend: Flag to indicate if we're suspending/resuming * @ndev: The net_device for this interface * @dev: The platform device object for this interface * @dtype: The type of this device * @io_regs: The ioremapped registers for this interface * @rx_irq_name: The textual name of the RX IRQ from the platform data * @tx_irq_name: The textual name of the TX IRQ from the platform data * @link_irq_name: The textual name of the link IRQ from the * platform data if available * @rx_irq: The IRQ number for the RX IRQ * @tx_irq: The IRQ number for the TX IRQ * @link_irq: The IRQ number for the link IRQ if available * @regs_req: The resource request for the registers region * @phyiface_req: The resource request for the phy/switch region * if available * @phyiface_regs: The ioremapped registers for the phy/switch if available * @ring_base: The base pointer of the dma coherent memory for the rings * @ring_base_dma: The DMA mapped equivalent of ring_base * @tx_ring: The pointer in ring_base of the TX ring * @tx_ring_used: The number of slots in the TX ring which are occupied * @tx_ring_next_slot: The next slot to fill in the TX ring * @tx_ring_dma: The DMA mapped equivalent of tx_ring * @tx_buffers: The sk_buff mappings for the TX ring * @txq_lock: A lock to protect the tx_buffers tx_ring_used etc variables * @rx_ring: The pointer in ring_base of the RX ring * @rx_ring_dma: The DMA mapped equivalent of rx_ring * @rx_buffers: The sk_buff mappings for the RX ring * @next_rx_desc_read: The next RX descriptor to read from on IRQ * @msg_enable: The flags for which messages to emit */ struct ks8695_priv { int in_suspend; struct net_device *ndev; struct device *dev; enum ks8695_dtype dtype; void __iomem *io_regs; struct napi_struct napi; const char *rx_irq_name, *tx_irq_name, *link_irq_name; int rx_irq, tx_irq, link_irq; struct resource *regs_req, *phyiface_req; void __iomem *phyiface_regs; void *ring_base; dma_addr_t ring_base_dma; struct tx_ring_desc *tx_ring; int tx_ring_used; int tx_ring_next_slot; dma_addr_t tx_ring_dma; struct ks8695_skbuff tx_buffers[MAX_TX_DESC]; spinlock_t txq_lock; struct rx_ring_desc *rx_ring; dma_addr_t rx_ring_dma; struct ks8695_skbuff rx_buffers[MAX_RX_DESC]; int next_rx_desc_read; spinlock_t rx_lock; int msg_enable; }; /* Register access */ /** * ks8695_readreg - Read from a KS8695 ethernet register * @ksp: The device to read from * @reg: The register to read */ static inline u32 ks8695_readreg(struct ks8695_priv *ksp, int reg) { return readl(ksp->io_regs + reg); } /** * ks8695_writereg - Write to a KS8695 ethernet register * @ksp: The device to write to * @reg: The register to write * @value: The value to write to the register */ static inline void ks8695_writereg(struct ks8695_priv *ksp, int reg, u32 value) { writel(value, ksp->io_regs + reg); } /* Utility functions */ /** * ks8695_port_type - Retrieve port-type as user-friendly string * @ksp: The device to return the type for * * Returns a string indicating which of the WAN, LAN or HPNA * ports this device is likely to represent. */ static const char * ks8695_port_type(struct ks8695_priv *ksp) { switch (ksp->dtype) { case KS8695_DTYPE_LAN: return "LAN"; case KS8695_DTYPE_WAN: return "WAN"; case KS8695_DTYPE_HPNA: return "HPNA"; } return "UNKNOWN"; } /** * ks8695_update_mac - Update the MAC registers in the device * @ksp: The device to update * * Updates the MAC registers in the KS8695 device from the address in the * net_device structure associated with this interface. */ static void ks8695_update_mac(struct ks8695_priv *ksp) { /* Update the HW with the MAC from the net_device */ struct net_device *ndev = ksp->ndev; u32 machigh, maclow; maclow = ((ndev->dev_addr[2] << 24) | (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5] << 0)); machigh = ((ndev->dev_addr[0] << 8) | (ndev->dev_addr[1] << 0)); ks8695_writereg(ksp, KS8695_MAL, maclow); ks8695_writereg(ksp, KS8695_MAH, machigh); } /** * ks8695_refill_rxbuffers - Re-fill the RX buffer ring * @ksp: The device to refill * * Iterates the RX ring of the device looking for empty slots. * For each empty slot, we allocate and map a new SKB and give it * to the hardware. * This can be called from interrupt context safely. */ static void ks8695_refill_rxbuffers(struct ks8695_priv *ksp) { /* Run around the RX ring, filling in any missing sk_buff's */ int buff_n; for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) { if (!ksp->rx_buffers[buff_n].skb) { struct sk_buff *skb = dev_alloc_skb(MAX_RXBUF_SIZE); dma_addr_t mapping; ksp->rx_buffers[buff_n].skb = skb; if (skb == NULL) { /* Failed to allocate one, perhaps * we'll try again later. */ break; } mapping = dma_map_single(ksp->dev, skb->data, MAX_RXBUF_SIZE, DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(ksp->dev, mapping))) { /* Failed to DMA map this SKB, try later */ dev_kfree_skb_irq(skb); ksp->rx_buffers[buff_n].skb = NULL; break; } ksp->rx_buffers[buff_n].dma_ptr = mapping; skb->dev = ksp->ndev; ksp->rx_buffers[buff_n].length = MAX_RXBUF_SIZE; /* Record this into the DMA ring */ ksp->rx_ring[buff_n].data_ptr = cpu_to_le32(mapping); ksp->rx_ring[buff_n].length = cpu_to_le32(MAX_RXBUF_SIZE); wmb(); /* And give ownership over to the hardware */ ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN); } } } /* Maximum number of multicast addresses which the KS8695 HW supports */ #define KS8695_NR_ADDRESSES 16 /** * ks8695_init_partial_multicast - Init the mcast addr registers * @ksp: The device to initialise * @addr: The multicast address list to use * @nr_addr: The number of addresses in the list * * This routine is a helper for ks8695_set_multicast - it writes * the additional-address registers in the KS8695 ethernet device * and cleans up any others left behind. */ static void ks8695_init_partial_multicast(struct ks8695_priv *ksp, struct dev_mc_list *addr, int nr_addr) { u32 low, high; int i; for (i = 0; i < nr_addr; i++, addr = addr->next) { /* Ran out of addresses? */ if (!addr) break; /* Ran out of space in chip? */ BUG_ON(i == KS8695_NR_ADDRESSES); low = (addr->dmi_addr[2] << 24) | (addr->dmi_addr[3] << 16) | (addr->dmi_addr[4] << 8) | (addr->dmi_addr[5]); high = (addr->dmi_addr[0] << 8) | (addr->dmi_addr[1]); ks8695_writereg(ksp, KS8695_AAL_(i), low); ks8695_writereg(ksp, KS8695_AAH_(i), AAH_E | high); } /* Clear the remaining Additional Station Addresses */ for (; i < KS8695_NR_ADDRESSES; i++) { ks8695_writereg(ksp, KS8695_AAL_(i), 0); ks8695_writereg(ksp, KS8695_AAH_(i), 0); } } /* Interrupt handling */ /** * ks8695_tx_irq - Transmit IRQ handler * @irq: The IRQ which went off (ignored) * @dev_id: The net_device for the interrupt * * Process the TX ring, clearing out any transmitted slots. * Allows the net_device to pass us new packets once slots are * freed. */ static irqreturn_t ks8695_tx_irq(int irq, void *dev_id) { struct net_device *ndev = (struct net_device *)dev_id; struct ks8695_priv *ksp = netdev_priv(ndev); int buff_n; for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) { if (ksp->tx_buffers[buff_n].skb && !(ksp->tx_ring[buff_n].owner & cpu_to_le32(TDES_OWN))) { rmb(); /* An SKB which is not owned by HW is present */ /* Update the stats for the net_device */ ndev->stats.tx_packets++; ndev->stats.tx_bytes += ksp->tx_buffers[buff_n].length; /* Free the packet from the ring */ ksp->tx_ring[buff_n].data_ptr = 0; /* Free the sk_buff */ dma_unmap_single(ksp->dev, ksp->tx_buffers[buff_n].dma_ptr, ksp->tx_buffers[buff_n].length, DMA_TO_DEVICE); dev_kfree_skb_irq(ksp->tx_buffers[buff_n].skb); ksp->tx_buffers[buff_n].skb = NULL; ksp->tx_ring_used--; } } netif_wake_queue(ndev); return IRQ_HANDLED; } /** * ks8695_rx_irq - Receive IRQ handler * @irq: The IRQ which went off (ignored) * @dev_id: The net_device for the interrupt * * Use NAPI to receive packets. */ static irqreturn_t ks8695_rx_irq(int irq, void *dev_id) { struct net_device *ndev = (struct net_device *)dev_id; struct ks8695_priv *ksp = netdev_priv(ndev); unsigned long status; unsigned long mask_bit = 1 << ksp->rx_irq; spin_lock(&ksp->rx_lock); status = readl(KS8695_IRQ_VA + KS8695_INTST); /*clean rx status bit*/ writel(status | mask_bit , KS8695_IRQ_VA + KS8695_INTST); if (status & mask_bit) { if (napi_schedule_prep(&ksp->napi)) { /*disable rx interrupt*/ status &= ~mask_bit; writel(status , KS8695_IRQ_VA + KS8695_INTEN); __napi_schedule(&ksp->napi); } } spin_unlock(&ksp->rx_lock); return IRQ_HANDLED; } static int ks8695_rx(struct net_device *ndev, int budget) { struct ks8695_priv *ksp = netdev_priv(ndev); struct sk_buff *skb; int buff_n; u32 flags; int pktlen; int last_rx_processed = -1; int received = 0; buff_n = ksp->next_rx_desc_read; while (received < budget && ksp->rx_buffers[buff_n].skb && (!(ksp->rx_ring[buff_n].status & cpu_to_le32(RDES_OWN)))) { rmb(); flags = le32_to_cpu(ksp->rx_ring[buff_n].status); /* Found an SKB which we own, this means we * received a packet */ if ((flags & (RDES_FS | RDES_LS)) != (RDES_FS | RDES_LS)) { /* This packet is not the first and * the last segment. Therefore it is * a "spanning" packet and we can't * handle it */ goto rx_failure; } if (flags & (RDES_ES | RDES_RE)) { /* It's an error packet */ ndev->stats.rx_errors++; if (flags & RDES_TL) ndev->stats.rx_length_errors++; if (flags & RDES_RF) ndev->stats.rx_length_errors++; if (flags & RDES_CE) ndev->stats.rx_crc_errors++; if (flags & RDES_RE) ndev->stats.rx_missed_errors++; goto rx_failure; } pktlen = flags & RDES_FLEN; pktlen -= 4; /* Drop the CRC */ /* Retrieve the sk_buff */ skb = ksp->rx_buffers[buff_n].skb; /* Clear it from the ring */ ksp->rx_buffers[buff_n].skb = NULL; ksp->rx_ring[buff_n].data_ptr = 0; /* Unmap the SKB */ dma_unmap_single(ksp->dev, ksp->rx_buffers[buff_n].dma_ptr, ksp->rx_buffers[buff_n].length, DMA_FROM_DEVICE); /* Relinquish the SKB to the network layer */ skb_put(skb, pktlen); skb->protocol = eth_type_trans(skb, ndev); netif_receive_skb(skb); /* Record stats */ ndev->stats.rx_packets++; ndev->stats.rx_bytes += pktlen; goto rx_finished; rx_failure: /* This ring entry is an error, but we can * re-use the skb */ /* Give the ring entry back to the hardware */ ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN); rx_finished: received++; /* And note this as processed so we can start * from here next time */ last_rx_processed = buff_n; buff_n = (buff_n + 1) & MAX_RX_DESC_MASK; /*And note which RX descriptor we last did */ if (likely(last_rx_processed != -1)) ksp->next_rx_desc_read = (last_rx_processed + 1) & MAX_RX_DESC_MASK; /* And refill the buffers */ ks8695_refill_rxbuffers(ksp); } return received; } static int ks8695_poll(struct napi_struct *napi, int budget) { struct ks8695_priv *ksp = container_of(napi, struct ks8695_priv, napi); struct net_device *dev = ksp->ndev; unsigned long mask_bit = 1 << ksp->rx_irq; unsigned long isr = readl(KS8695_IRQ_VA + KS8695_INTEN); unsigned long work_done ; work_done = ks8695_rx(dev, budget); if (work_done < budget) { unsigned long flags; spin_lock_irqsave(&ksp->rx_lock, flags); /*enable rx interrupt*/ writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN); __napi_complete(napi); spin_unlock_irqrestore(&ksp->rx_lock, flags); } return work_done; } /** * ks8695_link_irq - Link change IRQ handler * @irq: The IRQ which went off (ignored) * @dev_id: The net_device for the interrupt * * The WAN interface can generate an IRQ when the link changes, * report this to the net layer and the user. */ static irqreturn_t ks8695_link_irq(int irq, void *dev_id) { struct net_device *ndev = (struct net_device *)dev_id; struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; ctrl = readl(ksp->phyiface_regs + KS8695_WMC); if (ctrl & WMC_WLS) { netif_carrier_on(ndev); if (netif_msg_link(ksp)) dev_info(ksp->dev, "%s: Link is now up (10%sMbps/%s-duplex)\n", ndev->name, (ctrl & WMC_WSS) ? "0" : "", (ctrl & WMC_WDS) ? "Full" : "Half"); } else { netif_carrier_off(ndev); if (netif_msg_link(ksp)) dev_info(ksp->dev, "%s: Link is now down.\n", ndev->name); } return IRQ_HANDLED; } /* KS8695 Device functions */ /** * ks8695_reset - Reset a KS8695 ethernet interface * @ksp: The interface to reset * * Perform an engine reset of the interface and re-program it * with sensible defaults. */ static void ks8695_reset(struct ks8695_priv *ksp) { int reset_timeout = watchdog; /* Issue the reset via the TX DMA control register */ ks8695_writereg(ksp, KS8695_DTXC, DTXC_TRST); while (reset_timeout--) { if (!(ks8695_readreg(ksp, KS8695_DTXC) & DTXC_TRST)) break; msleep(1); } if (reset_timeout < 0) { dev_crit(ksp->dev, "Timeout waiting for DMA engines to reset\n"); /* And blithely carry on */ } /* Definitely wait long enough before attempting to program * the engines */ msleep(10); /* RX: unicast and broadcast */ ks8695_writereg(ksp, KS8695_DRXC, DRXC_RU | DRXC_RB); /* TX: pad and add CRC */ ks8695_writereg(ksp, KS8695_DTXC, DTXC_TEP | DTXC_TAC); } /** * ks8695_shutdown - Shut down a KS8695 ethernet interface * @ksp: The interface to shut down * * This disables packet RX/TX, cleans up IRQs, drains the rings, * and basically places the interface into a clean shutdown * state. */ static void ks8695_shutdown(struct ks8695_priv *ksp) { u32 ctrl; int buff_n; /* Disable packet transmission */ ctrl = ks8695_readreg(ksp, KS8695_DTXC); ks8695_writereg(ksp, KS8695_DTXC, ctrl & ~DTXC_TE); /* Disable packet reception */ ctrl = ks8695_readreg(ksp, KS8695_DRXC); ks8695_writereg(ksp, KS8695_DRXC, ctrl & ~DRXC_RE); /* Release the IRQs */ free_irq(ksp->rx_irq, ksp->ndev); free_irq(ksp->tx_irq, ksp->ndev); if (ksp->link_irq != -1) free_irq(ksp->link_irq, ksp->ndev); /* Throw away any pending TX packets */ for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) { if (ksp->tx_buffers[buff_n].skb) { /* Remove this SKB from the TX ring */ ksp->tx_ring[buff_n].owner = 0; ksp->tx_ring[buff_n].status = 0; ksp->tx_ring[buff_n].data_ptr = 0; /* Unmap and bin this SKB */ dma_unmap_single(ksp->dev, ksp->tx_buffers[buff_n].dma_ptr, ksp->tx_buffers[buff_n].length, DMA_TO_DEVICE); dev_kfree_skb_irq(ksp->tx_buffers[buff_n].skb); ksp->tx_buffers[buff_n].skb = NULL; } } /* Purge the RX buffers */ for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) { if (ksp->rx_buffers[buff_n].skb) { /* Remove the SKB from the RX ring */ ksp->rx_ring[buff_n].status = 0; ksp->rx_ring[buff_n].data_ptr = 0; /* Unmap and bin the SKB */ dma_unmap_single(ksp->dev, ksp->rx_buffers[buff_n].dma_ptr, ksp->rx_buffers[buff_n].length, DMA_FROM_DEVICE); dev_kfree_skb_irq(ksp->rx_buffers[buff_n].skb); ksp->rx_buffers[buff_n].skb = NULL; } } } /** * ks8695_setup_irq - IRQ setup helper function * @irq: The IRQ number to claim * @irq_name: The name to give the IRQ claimant * @handler: The function to call to handle the IRQ * @ndev: The net_device to pass in as the dev_id argument to the handler * * Return 0 on success. */ static int ks8695_setup_irq(int irq, const char *irq_name, irq_handler_t handler, struct net_device *ndev) { int ret; ret = request_irq(irq, handler, IRQF_SHARED, irq_name, ndev); if (ret) { dev_err(&ndev->dev, "failure to request IRQ %d\n", irq); return ret; } return 0; } /** * ks8695_init_net - Initialise a KS8695 ethernet interface * @ksp: The interface to initialise * * This routine fills the RX ring, initialises the DMA engines, * allocates the IRQs and then starts the packet TX and RX * engines. */ static int ks8695_init_net(struct ks8695_priv *ksp) { int ret; u32 ctrl; ks8695_refill_rxbuffers(ksp); /* Initialise the DMA engines */ ks8695_writereg(ksp, KS8695_RDLB, (u32) ksp->rx_ring_dma); ks8695_writereg(ksp, KS8695_TDLB, (u32) ksp->tx_ring_dma); /* Request the IRQs */ ret = ks8695_setup_irq(ksp->rx_irq, ksp->rx_irq_name, ks8695_rx_irq, ksp->ndev); if (ret) return ret; ret = ks8695_setup_irq(ksp->tx_irq, ksp->tx_irq_name, ks8695_tx_irq, ksp->ndev); if (ret) return ret; if (ksp->link_irq != -1) { ret = ks8695_setup_irq(ksp->link_irq, ksp->link_irq_name, ks8695_link_irq, ksp->ndev); if (ret) return ret; } /* Set up the ring indices */ ksp->next_rx_desc_read = 0; ksp->tx_ring_next_slot = 0; ksp->tx_ring_used = 0; /* Bring up transmission */ ctrl = ks8695_readreg(ksp, KS8695_DTXC); /* Enable packet transmission */ ks8695_writereg(ksp, KS8695_DTXC, ctrl | DTXC_TE); /* Bring up the reception */ ctrl = ks8695_readreg(ksp, KS8695_DRXC); /* Enable packet reception */ ks8695_writereg(ksp, KS8695_DRXC, ctrl | DRXC_RE); /* And start the DMA engine */ ks8695_writereg(ksp, KS8695_DRSC, 0); /* All done */ return 0; } /** * ks8695_release_device - HW resource release for KS8695 e-net * @ksp: The device to be freed * * This unallocates io memory regions, dma-coherent regions etc * which were allocated in ks8695_probe. */ static void ks8695_release_device(struct ks8695_priv *ksp) { /* Unmap the registers */ iounmap(ksp->io_regs); if (ksp->phyiface_regs) iounmap(ksp->phyiface_regs); /* And release the request */ release_resource(ksp->regs_req); kfree(ksp->regs_req); if (ksp->phyiface_req) { release_resource(ksp->phyiface_req); kfree(ksp->phyiface_req); } /* Free the ring buffers */ dma_free_coherent(ksp->dev, RING_DMA_SIZE, ksp->ring_base, ksp->ring_base_dma); } /* Ethtool support */ /** * ks8695_get_msglevel - Get the messages enabled for emission * @ndev: The network device to read from */ static u32 ks8695_get_msglevel(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); return ksp->msg_enable; } /** * ks8695_set_msglevel - Set the messages enabled for emission * @ndev: The network device to configure * @value: The messages to set for emission */ static void ks8695_set_msglevel(struct net_device *ndev, u32 value) { struct ks8695_priv *ksp = netdev_priv(ndev); ksp->msg_enable = value; } /** * ks8695_get_settings - Get device-specific settings. * @ndev: The network device to read settings from * @cmd: The ethtool structure to read into */ static int ks8695_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; /* All ports on the KS8695 support these... */ cmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_TP | SUPPORTED_MII); cmd->transceiver = XCVR_INTERNAL; /* Port specific extras */ switch (ksp->dtype) { case KS8695_DTYPE_HPNA: cmd->phy_address = 0; /* not supported for HPNA */ cmd->autoneg = AUTONEG_DISABLE; /* BUG: Erm, dtype hpna implies no phy regs */ /* ctrl = readl(KS8695_MISC_VA + KS8695_HMC); cmd->speed = (ctrl & HMC_HSS) ? SPEED_100 : SPEED_10; cmd->duplex = (ctrl & HMC_HDS) ? DUPLEX_FULL : DUPLEX_HALF; */ return -EOPNOTSUPP; case KS8695_DTYPE_WAN: cmd->advertising = ADVERTISED_TP | ADVERTISED_MII; cmd->port = PORT_MII; cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause); cmd->phy_address = 0; ctrl = readl(ksp->phyiface_regs + KS8695_WMC); if ((ctrl & WMC_WAND) == 0) { /* auto-negotiation is enabled */ cmd->advertising |= ADVERTISED_Autoneg; if (ctrl & WMC_WANA100F) cmd->advertising |= ADVERTISED_100baseT_Full; if (ctrl & WMC_WANA100H) cmd->advertising |= ADVERTISED_100baseT_Half; if (ctrl & WMC_WANA10F) cmd->advertising |= ADVERTISED_10baseT_Full; if (ctrl & WMC_WANA10H) cmd->advertising |= ADVERTISED_10baseT_Half; if (ctrl & WMC_WANAP) cmd->advertising |= ADVERTISED_Pause; cmd->autoneg = AUTONEG_ENABLE; cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10; cmd->duplex = (ctrl & WMC_WDS) ? DUPLEX_FULL : DUPLEX_HALF; } else { /* auto-negotiation is disabled */ cmd->autoneg = AUTONEG_DISABLE; cmd->speed = (ctrl & WMC_WANF100) ? SPEED_100 : SPEED_10; cmd->duplex = (ctrl & WMC_WANFF) ? DUPLEX_FULL : DUPLEX_HALF; } break; case KS8695_DTYPE_LAN: return -EOPNOTSUPP; } return 0; } /** * ks8695_set_settings - Set device-specific settings. * @ndev: The network device to configure * @cmd: The settings to configure */ static int ks8695_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; if ((cmd->speed != SPEED_10) && (cmd->speed != SPEED_100)) return -EINVAL; if ((cmd->duplex != DUPLEX_HALF) && (cmd->duplex != DUPLEX_FULL)) return -EINVAL; if (cmd->port != PORT_MII) return -EINVAL; if (cmd->transceiver != XCVR_INTERNAL) return -EINVAL; if ((cmd->autoneg != AUTONEG_DISABLE) && (cmd->autoneg != AUTONEG_ENABLE)) return -EINVAL; if (cmd->autoneg == AUTONEG_ENABLE) { if ((cmd->advertising & (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full)) == 0) return -EINVAL; switch (ksp->dtype) { case KS8695_DTYPE_HPNA: /* HPNA does not support auto-negotiation. */ return -EINVAL; case KS8695_DTYPE_WAN: ctrl = readl(ksp->phyiface_regs + KS8695_WMC); ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H | WMC_WANA10F | WMC_WANA10H); if (cmd->advertising & ADVERTISED_100baseT_Full) ctrl |= WMC_WANA100F; if (cmd->advertising & ADVERTISED_100baseT_Half) ctrl |= WMC_WANA100H; if (cmd->advertising & ADVERTISED_10baseT_Full) ctrl |= WMC_WANA10F; if (cmd->advertising & ADVERTISED_10baseT_Half) ctrl |= WMC_WANA10H; /* force a re-negotiation */ ctrl |= WMC_WANR; writel(ctrl, ksp->phyiface_regs + KS8695_WMC); break; case KS8695_DTYPE_LAN: return -EOPNOTSUPP; } } else { switch (ksp->dtype) { case KS8695_DTYPE_HPNA: /* BUG: dtype_hpna implies no phy registers */ /* ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC); ctrl &= ~(HMC_HSS | HMC_HDS); if (cmd->speed == SPEED_100) ctrl |= HMC_HSS; if (cmd->duplex == DUPLEX_FULL) ctrl |= HMC_HDS; __raw_writel(ctrl, KS8695_MISC_VA + KS8695_HMC); */ return -EOPNOTSUPP; case KS8695_DTYPE_WAN: ctrl = readl(ksp->phyiface_regs + KS8695_WMC); /* disable auto-negotiation */ ctrl |= WMC_WAND; ctrl &= ~(WMC_WANF100 | WMC_WANFF); if (cmd->speed == SPEED_100) ctrl |= WMC_WANF100; if (cmd->duplex == DUPLEX_FULL) ctrl |= WMC_WANFF; writel(ctrl, ksp->phyiface_regs + KS8695_WMC); break; case KS8695_DTYPE_LAN: return -EOPNOTSUPP; } } return 0; } /** * ks8695_nwayreset - Restart the autonegotiation on the port. * @ndev: The network device to restart autoneotiation on */ static int ks8695_nwayreset(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; switch (ksp->dtype) { case KS8695_DTYPE_HPNA: /* No phy means no autonegotiation on hpna */ return -EINVAL; case KS8695_DTYPE_WAN: ctrl = readl(ksp->phyiface_regs + KS8695_WMC); if ((ctrl & WMC_WAND) == 0) writel(ctrl | WMC_WANR, ksp->phyiface_regs + KS8695_WMC); else /* auto-negotiation not enabled */ return -EINVAL; break; case KS8695_DTYPE_LAN: return -EOPNOTSUPP; } return 0; } /** * ks8695_get_link - Retrieve link status of network interface * @ndev: The network interface to retrive the link status of. */ static u32 ks8695_get_link(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; switch (ksp->dtype) { case KS8695_DTYPE_HPNA: /* HPNA always has link */ return 1; case KS8695_DTYPE_WAN: /* WAN we can read the PHY for */ ctrl = readl(ksp->phyiface_regs + KS8695_WMC); return ctrl & WMC_WLS; case KS8695_DTYPE_LAN: return -EOPNOTSUPP; } return 0; } /** * ks8695_get_pause - Retrieve network pause/flow-control advertising * @ndev: The device to retrieve settings from * @param: The structure to fill out with the information */ static void ks8695_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; switch (ksp->dtype) { case KS8695_DTYPE_HPNA: /* No phy link on hpna to configure */ return; case KS8695_DTYPE_WAN: ctrl = readl(ksp->phyiface_regs + KS8695_WMC); /* advertise Pause */ param->autoneg = (ctrl & WMC_WANAP); /* current Rx Flow-control */ ctrl = ks8695_readreg(ksp, KS8695_DRXC); param->rx_pause = (ctrl & DRXC_RFCE); /* current Tx Flow-control */ ctrl = ks8695_readreg(ksp, KS8695_DTXC); param->tx_pause = (ctrl & DTXC_TFCE); break; case KS8695_DTYPE_LAN: /* The LAN's "phy" is a direct-attached switch */ return; } } /** * ks8695_set_pause - Configure pause/flow-control * @ndev: The device to configure * @param: The pause parameters to set * * TODO: Implement this */ static int ks8695_set_pause(struct net_device *ndev, struct ethtool_pauseparam *param) { return -EOPNOTSUPP; } /** * ks8695_get_drvinfo - Retrieve driver information * @ndev: The network device to retrieve info about * @info: The info structure to fill out. */ static void ks8695_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) { strlcpy(info->driver, MODULENAME, sizeof(info->driver)); strlcpy(info->version, MODULEVERSION, sizeof(info->version)); strlcpy(info->bus_info, dev_name(ndev->dev.parent), sizeof(info->bus_info)); } static const struct ethtool_ops ks8695_ethtool_ops = { .get_msglevel = ks8695_get_msglevel, .set_msglevel = ks8695_set_msglevel, .get_settings = ks8695_get_settings, .set_settings = ks8695_set_settings, .nway_reset = ks8695_nwayreset, .get_link = ks8695_get_link, .get_pauseparam = ks8695_get_pause, .set_pauseparam = ks8695_set_pause, .get_drvinfo = ks8695_get_drvinfo, }; /* Network device interface functions */ /** * ks8695_set_mac - Update MAC in net dev and HW * @ndev: The network device to update * @addr: The new MAC address to set */ static int ks8695_set_mac(struct net_device *ndev, void *addr) { struct ks8695_priv *ksp = netdev_priv(ndev); struct sockaddr *address = addr; if (!is_valid_ether_addr(address->sa_data)) return -EADDRNOTAVAIL; memcpy(ndev->dev_addr, address->sa_data, ndev->addr_len); ks8695_update_mac(ksp); dev_dbg(ksp->dev, "%s: Updated MAC address to %pM\n", ndev->name, ndev->dev_addr); return 0; } /** * ks8695_set_multicast - Set up the multicast behaviour of the interface * @ndev: The net_device to configure * * This routine, called by the net layer, configures promiscuity * and multicast reception behaviour for the interface. */ static void ks8695_set_multicast(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; ctrl = ks8695_readreg(ksp, KS8695_DRXC); if (ndev->flags & IFF_PROMISC) { /* enable promiscuous mode */ ctrl |= DRXC_RA; } else if (ndev->flags & ~IFF_PROMISC) { /* disable promiscuous mode */ ctrl &= ~DRXC_RA; } if (ndev->flags & IFF_ALLMULTI) { /* enable all multicast mode */ ctrl |= DRXC_RM; } else if (ndev->mc_count > KS8695_NR_ADDRESSES) { /* more specific multicast addresses than can be * handled in hardware */ ctrl |= DRXC_RM; } else { /* enable specific multicasts */ ctrl &= ~DRXC_RM; ks8695_init_partial_multicast(ksp, ndev->mc_list, ndev->mc_count); } ks8695_writereg(ksp, KS8695_DRXC, ctrl); } /** * ks8695_timeout - Handle a network tx/rx timeout. * @ndev: The net_device which timed out. * * A network transaction timed out, reset the device. */ static void ks8695_timeout(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); netif_stop_queue(ndev); ks8695_shutdown(ksp); ks8695_reset(ksp); ks8695_update_mac(ksp); /* We ignore the return from this since it managed to init * before it probably will be okay to init again. */ ks8695_init_net(ksp); /* Reconfigure promiscuity etc */ ks8695_set_multicast(ndev); /* And start the TX queue once more */ netif_start_queue(ndev); } /** * ks8695_start_xmit - Start a packet transmission * @skb: The packet to transmit * @ndev: The network device to send the packet on * * This routine, called by the net layer, takes ownership of the * sk_buff and adds it to the TX ring. It then kicks the TX DMA * engine to ensure transmission begins. */ static int ks8695_start_xmit(struct sk_buff *skb, struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); int buff_n; dma_addr_t dmap; spin_lock_irq(&ksp->txq_lock); if (ksp->tx_ring_used == MAX_TX_DESC) { /* Somehow we got entered when we have no room */ spin_unlock_irq(&ksp->txq_lock); return NETDEV_TX_BUSY; } buff_n = ksp->tx_ring_next_slot; BUG_ON(ksp->tx_buffers[buff_n].skb); dmap = dma_map_single(ksp->dev, skb->data, skb->len, DMA_TO_DEVICE); if (unlikely(dma_mapping_error(ksp->dev, dmap))) { /* Failed to DMA map this SKB, give it back for now */ spin_unlock_irq(&ksp->txq_lock); dev_dbg(ksp->dev, "%s: Could not map DMA memory for "\ "transmission, trying later\n", ndev->name); return NETDEV_TX_BUSY; } ksp->tx_buffers[buff_n].dma_ptr = dmap; /* Mapped okay, store the buffer pointer and length for later */ ksp->tx_buffers[buff_n].skb = skb; ksp->tx_buffers[buff_n].length = skb->len; /* Fill out the TX descriptor */ ksp->tx_ring[buff_n].data_ptr = cpu_to_le32(ksp->tx_buffers[buff_n].dma_ptr); ksp->tx_ring[buff_n].status = cpu_to_le32(TDES_IC | TDES_FS | TDES_LS | (skb->len & TDES_TBS)); wmb(); /* Hand it over to the hardware */ ksp->tx_ring[buff_n].owner = cpu_to_le32(TDES_OWN); if (++ksp->tx_ring_used == MAX_TX_DESC) netif_stop_queue(ndev); ndev->trans_start = jiffies; /* Kick the TX DMA in case it decided to go IDLE */ ks8695_writereg(ksp, KS8695_DTSC, 0); /* And update the next ring slot */ ksp->tx_ring_next_slot = (buff_n + 1) & MAX_TX_DESC_MASK; spin_unlock_irq(&ksp->txq_lock); return NETDEV_TX_OK; } /** * ks8695_stop - Stop (shutdown) a KS8695 ethernet interface * @ndev: The net_device to stop * * This disables the TX queue and cleans up a KS8695 ethernet * device. */ static int ks8695_stop(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); netif_stop_queue(ndev); netif_carrier_off(ndev); ks8695_shutdown(ksp); return 0; } /** * ks8695_open - Open (bring up) a KS8695 ethernet interface * @ndev: The net_device to open * * This resets, configures the MAC, initialises the RX ring and * DMA engines and starts the TX queue for a KS8695 ethernet * device. */ static int ks8695_open(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); int ret; if (!is_valid_ether_addr(ndev->dev_addr)) return -EADDRNOTAVAIL; ks8695_reset(ksp); ks8695_update_mac(ksp); ret = ks8695_init_net(ksp); if (ret) { ks8695_shutdown(ksp); return ret; } netif_start_queue(ndev); return 0; } /* Platform device driver */ /** * ks8695_init_switch - Init LAN switch to known good defaults. * @ksp: The device to initialise * * This initialises the LAN switch in the KS8695 to a known-good * set of defaults. */ static void __devinit ks8695_init_switch(struct ks8695_priv *ksp) { u32 ctrl; /* Default value for SEC0 according to datasheet */ ctrl = 0x40819e00; /* LED0 = Speed LED1 = Link/Activity */ ctrl &= ~(SEC0_LLED1S | SEC0_LLED0S); ctrl |= (LLED0S_LINK | LLED1S_LINK_ACTIVITY); /* Enable Switch */ ctrl |= SEC0_ENABLE; writel(ctrl, ksp->phyiface_regs + KS8695_SEC0); /* Defaults for SEC1 */ writel(0x9400100, ksp->phyiface_regs + KS8695_SEC1); } /** * ks8695_init_wan_phy - Initialise the WAN PHY to sensible defaults * @ksp: The device to initialise * * This initialises a KS8695's WAN phy to sensible values for * autonegotiation etc. */ static void __devinit ks8695_init_wan_phy(struct ks8695_priv *ksp) { u32 ctrl; /* Support auto-negotiation */ ctrl = (WMC_WANAP | WMC_WANA100F | WMC_WANA100H | WMC_WANA10F | WMC_WANA10H); /* LED0 = Activity , LED1 = Link */ ctrl |= (WLED0S_ACTIVITY | WLED1S_LINK); /* Restart Auto-negotiation */ ctrl |= WMC_WANR; writel(ctrl, ksp->phyiface_regs + KS8695_WMC); writel(0, ksp->phyiface_regs + KS8695_WPPM); writel(0, ksp->phyiface_regs + KS8695_PPS); } static const struct net_device_ops ks8695_netdev_ops = { .ndo_open = ks8695_open, .ndo_stop = ks8695_stop, .ndo_start_xmit = ks8695_start_xmit, .ndo_tx_timeout = ks8695_timeout, .ndo_set_mac_address = ks8695_set_mac, .ndo_validate_addr = eth_validate_addr, .ndo_set_multicast_list = ks8695_set_multicast, }; /** * ks8695_probe - Probe and initialise a KS8695 ethernet interface * @pdev: The platform device to probe * * Initialise a KS8695 ethernet device from platform data. * * This driver requires at least one IORESOURCE_MEM for the * registers and two IORESOURCE_IRQ for the RX and TX IRQs * respectively. It can optionally take an additional * IORESOURCE_MEM for the switch or phy in the case of the lan or * wan ports, and an IORESOURCE_IRQ for the link IRQ for the wan * port. */ static int __devinit ks8695_probe(struct platform_device *pdev) { struct ks8695_priv *ksp; struct net_device *ndev; struct resource *regs_res, *phyiface_res; struct resource *rxirq_res, *txirq_res, *linkirq_res; int ret = 0; int buff_n; u32 machigh, maclow; /* Initialise a net_device */ ndev = alloc_etherdev(sizeof(struct ks8695_priv)); if (!ndev) { dev_err(&pdev->dev, "could not allocate device.\n"); return -ENOMEM; } SET_NETDEV_DEV(ndev, &pdev->dev); dev_dbg(&pdev->dev, "ks8695_probe() called\n"); /* Configure our private structure a little */ ksp = netdev_priv(ndev); memset(ksp, 0, sizeof(struct ks8695_priv)); ksp->dev = &pdev->dev; ksp->ndev = ndev; ksp->msg_enable = NETIF_MSG_LINK; /* Retrieve resources */ regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); phyiface_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); rxirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); txirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1); linkirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 2); if (!(regs_res && rxirq_res && txirq_res)) { dev_err(ksp->dev, "insufficient resources\n"); ret = -ENOENT; goto failure; } ksp->regs_req = request_mem_region(regs_res->start, resource_size(regs_res), pdev->name); if (!ksp->regs_req) { dev_err(ksp->dev, "cannot claim register space\n"); ret = -EIO; goto failure; } ksp->io_regs = ioremap(regs_res->start, resource_size(regs_res)); if (!ksp->io_regs) { dev_err(ksp->dev, "failed to ioremap registers\n"); ret = -EINVAL; goto failure; } if (phyiface_res) { ksp->phyiface_req = request_mem_region(phyiface_res->start, resource_size(phyiface_res), phyiface_res->name); if (!ksp->phyiface_req) { dev_err(ksp->dev, "cannot claim switch register space\n"); ret = -EIO; goto failure; } ksp->phyiface_regs = ioremap(phyiface_res->start, resource_size(phyiface_res)); if (!ksp->phyiface_regs) { dev_err(ksp->dev, "failed to ioremap switch registers\n"); ret = -EINVAL; goto failure; } } ksp->rx_irq = rxirq_res->start; ksp->rx_irq_name = rxirq_res->name ? rxirq_res->name : "Ethernet RX"; ksp->tx_irq = txirq_res->start; ksp->tx_irq_name = txirq_res->name ? txirq_res->name : "Ethernet TX"; ksp->link_irq = (linkirq_res ? linkirq_res->start : -1); ksp->link_irq_name = (linkirq_res && linkirq_res->name) ? linkirq_res->name : "Ethernet Link"; /* driver system setup */ ndev->netdev_ops = &ks8695_netdev_ops; SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops); ndev->watchdog_timeo = msecs_to_jiffies(watchdog); netif_napi_add(ndev, &ksp->napi, ks8695_poll, 64); /* Retrieve the default MAC addr from the chip. */ /* The bootloader should have left it in there for us. */ machigh = ks8695_readreg(ksp, KS8695_MAH); maclow = ks8695_readreg(ksp, KS8695_MAL); ndev->dev_addr[0] = (machigh >> 8) & 0xFF; ndev->dev_addr[1] = machigh & 0xFF; ndev->dev_addr[2] = (maclow >> 24) & 0xFF; ndev->dev_addr[3] = (maclow >> 16) & 0xFF; ndev->dev_addr[4] = (maclow >> 8) & 0xFF; ndev->dev_addr[5] = maclow & 0xFF; if (!is_valid_ether_addr(ndev->dev_addr)) dev_warn(ksp->dev, "%s: Invalid ethernet MAC address. Please " "set using ifconfig\n", ndev->name); /* In order to be efficient memory-wise, we allocate both * rings in one go. */ ksp->ring_base = dma_alloc_coherent(&pdev->dev, RING_DMA_SIZE, &ksp->ring_base_dma, GFP_KERNEL); if (!ksp->ring_base) { ret = -ENOMEM; goto failure; } /* Specify the TX DMA ring buffer */ ksp->tx_ring = ksp->ring_base; ksp->tx_ring_dma = ksp->ring_base_dma; /* And initialise the queue's lock */ spin_lock_init(&ksp->txq_lock); spin_lock_init(&ksp->rx_lock); /* Specify the RX DMA ring buffer */ ksp->rx_ring = ksp->ring_base + TX_RING_DMA_SIZE; ksp->rx_ring_dma = ksp->ring_base_dma + TX_RING_DMA_SIZE; /* Zero the descriptor rings */ memset(ksp->tx_ring, 0, TX_RING_DMA_SIZE); memset(ksp->rx_ring, 0, RX_RING_DMA_SIZE); /* Build the rings */ for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) { ksp->tx_ring[buff_n].next_desc = cpu_to_le32(ksp->tx_ring_dma + (sizeof(struct tx_ring_desc) * ((buff_n + 1) & MAX_TX_DESC_MASK))); } for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) { ksp->rx_ring[buff_n].next_desc = cpu_to_le32(ksp->rx_ring_dma + (sizeof(struct rx_ring_desc) * ((buff_n + 1) & MAX_RX_DESC_MASK))); } /* Initialise the port (physically) */ if (ksp->phyiface_regs && ksp->link_irq == -1) { ks8695_init_switch(ksp); ksp->dtype = KS8695_DTYPE_LAN; } else if (ksp->phyiface_regs && ksp->link_irq != -1) { ks8695_init_wan_phy(ksp); ksp->dtype = KS8695_DTYPE_WAN; } else { /* No initialisation since HPNA does not have a PHY */ ksp->dtype = KS8695_DTYPE_HPNA; } /* And bring up the net_device with the net core */ platform_set_drvdata(pdev, ndev); ret = register_netdev(ndev); if (ret == 0) { dev_info(ksp->dev, "ks8695 ethernet (%s) MAC: %pM\n", ks8695_port_type(ksp), ndev->dev_addr); } else { /* Report the failure to register the net_device */ dev_err(ksp->dev, "ks8695net: failed to register netdev.\n"); goto failure; } /* All is well */ return 0; /* Error exit path */ failure: ks8695_release_device(ksp); free_netdev(ndev); return ret; } /** * ks8695_drv_suspend - Suspend a KS8695 ethernet platform device. * @pdev: The device to suspend * @state: The suspend state * * This routine detaches and shuts down a KS8695 ethernet device. */ static int ks8695_drv_suspend(struct platform_device *pdev, pm_message_t state) { struct net_device *ndev = platform_get_drvdata(pdev); struct ks8695_priv *ksp = netdev_priv(ndev); ksp->in_suspend = 1; if (netif_running(ndev)) { netif_device_detach(ndev); ks8695_shutdown(ksp); } return 0; } /** * ks8695_drv_resume - Resume a KS8695 ethernet platform device. * @pdev: The device to resume * * This routine re-initialises and re-attaches a KS8695 ethernet * device. */ static int ks8695_drv_resume(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct ks8695_priv *ksp = netdev_priv(ndev); if (netif_running(ndev)) { ks8695_reset(ksp); ks8695_init_net(ksp); ks8695_set_multicast(ndev); netif_device_attach(ndev); } ksp->in_suspend = 0; return 0; } /** * ks8695_drv_remove - Remove a KS8695 net device on driver unload. * @pdev: The platform device to remove * * This unregisters and releases a KS8695 ethernet device. */ static int __devexit ks8695_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct ks8695_priv *ksp = netdev_priv(ndev); platform_set_drvdata(pdev, NULL); netif_napi_del(&ksp->napi); unregister_netdev(ndev); ks8695_release_device(ksp); free_netdev(ndev); dev_dbg(&pdev->dev, "released and freed device\n"); return 0; } static struct platform_driver ks8695_driver = { .driver = { .name = MODULENAME, .owner = THIS_MODULE, }, .probe = ks8695_probe, .remove = __devexit_p(ks8695_drv_remove), .suspend = ks8695_drv_suspend, .resume = ks8695_drv_resume, }; /* Module interface */ static int __init ks8695_init(void) { printk(KERN_INFO "%s Ethernet driver, V%s\n", MODULENAME, MODULEVERSION); return platform_driver_register(&ks8695_driver); } static void __exit ks8695_cleanup(void) { platform_driver_unregister(&ks8695_driver); } module_init(ks8695_init); module_exit(ks8695_cleanup); MODULE_AUTHOR("Simtec Electronics") MODULE_DESCRIPTION("Micrel KS8695 (Centaur) Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" MODULENAME); module_param(watchdog, int, 0400); MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");