# # Intel network device configuration # config NET_VENDOR_INTEL bool "Intel devices" default y ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from . Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all the questions about Intel cards. If you say Y, you will be asked for your specific card in the following questions. if NET_VENDOR_INTEL config E100 tristate "Intel(R) PRO/100+ support" depends on PCI select MII ---help--- This driver supports Intel(R) PRO/100 family of adapters. To verify that your adapter is supported, find the board ID number on the adapter. Look for a label that has a barcode and a number in the format 123456-001 (six digits hyphen three digits). Use the above information and the Adapter & Driver ID Guide at: to identify the adapter. For the latest Intel PRO/100 network driver for Linux, see: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called e100. config E1000 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" depends on PCI ---help--- This driver supports Intel(R) PRO/1000 gigabit ethernet family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called e1000. config E1000E tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" depends on PCI && (!SPARC32 || BROKEN) select CRC32 select PTP_1588_CLOCK ---help--- This driver supports the PCI-Express Intel(R) PRO/1000 gigabit ethernet family of adapters. For PCI or PCI-X e1000 adapters, use the regular e1000 driver For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: To compile this driver as a module, choose M here. The module will be called e1000e. config IGB tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" depends on PCI select PTP_1588_CLOCK select I2C select I2C_ALGOBIT ---help--- This driver supports Intel(R) 82575/82576 gigabit ethernet family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called igb. config IGB_HWMON bool "Intel(R) PCI-Express Gigabit adapters HWMON support" default y depends on IGB && HWMON && !(IGB=y && HWMON=m) ---help--- Say Y if you want to expose thermal sensor data on Intel devices. Some of our devices contain thermal sensors, both external and internal. This data is available via the hwmon sysfs interface and exposes the onboard sensors. config IGB_DCA bool "Direct Cache Access (DCA) Support" default y depends on IGB && DCA && !(IGB=y && DCA=m) ---help--- Say Y here if you want to use Direct Cache Access (DCA) in the driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. config IGBVF tristate "Intel(R) 82576 Virtual Function Ethernet support" depends on PCI ---help--- This driver supports Intel(R) 82576 virtual functions. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called igbvf. config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI ---help--- This driver supports Intel(R) PRO/10GbE family of adapters for PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver instead. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called ixgb. config IXGBE tristate "Intel(R) 10GbE PCI Express adapters support" depends on PCI select MDIO select PTP_1588_CLOCK ---help--- This driver supports Intel(R) 10GbE PCI Express family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: To compile this driver as a module, choose M here. The module will be called ixgbe. config IXGBE_HWMON bool "Intel(R) 10GbE PCI Express adapters HWMON support" default y depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) ---help--- Say Y if you want to expose the thermal sensor data on some of our cards, via a hwmon sysfs interface. config IXGBE_DCA bool "Direct Cache Access (DCA) Support" default y depends on IXGBE && DCA && !(IXGBE=y && DCA=m) ---help--- Say Y here if you want to use Direct Cache Access (DCA) in the driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. config IXGBE_DCB bool "Data Center Bridging (DCB) Support" default n depends on IXGBE && DCB ---help--- Say Y here if you want to use Data Center Bridging (DCB) in the driver. If unsure, say N. config IXGBEVF tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" depends on PCI_MSI ---help--- This driver supports Intel(R) PCI Express virtual functions for the Intel(R) ixgbe driver. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called ixgbevf. MSI-X interrupt support is required for this driver to work correctly. config I40E tristate "Intel(R) Ethernet Controller XL710 Family support" depends on PCI ---help--- This driver supports Intel(R) Ethernet Controller XL710 Family of devices. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: To compile this driver as a module, choose M here. The module will be called i40e. config I40E_VXLAN bool "Virtual eXtensible Local Area Network Support" default n depends on I40E && VXLAN && !(I40E=y && VXLAN=m) ---help--- This allows one to create VXLAN virtual interfaces that provide Layer 2 Networks over Layer 3 Networks. VXLAN is often used to tunnel virtual network infrastructure in virtualized environments. Say Y here if you want to use Virtual eXtensible Local Area Network (VXLAN) in the driver. If unsure, say N. config I40EVF tristate "Intel(R) XL710 X710 Virtual Function Ethernet support" depends on PCI_MSI ---help--- This driver supports Intel(R) XL710 and X710 virtual functions. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: For general information and support, go to the Intel support website at: To compile this driver as a module, choose M here. The module will be called i40evf. MSI-X interrupt support is required for this driver to work correctly. endif # NET_VENDOR_INTEL