/* * Copyright (c) 2004-2007 Reyk Floeter * Copyright (c) 2006-2007 Nick Kossifidis * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _ATH5K_H #define _ATH5K_H /* TODO: Clean up channel debuging -doesn't work anyway- and start * working on reg. control code using all available eeprom information * -rev. engineering needed- */ #define CHAN_DEBUG 0 #include #include #include /* RX/TX descriptor hw structs * TODO: Driver part should only see sw structs */ #include "desc.h" /* EEPROM structs/offsets * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) * and clean up common bits, then introduce set/get functions in eeprom.c */ #include "eeprom.h" #include "../ath.h" /* PCI IDs */ #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ #define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ #define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ #define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ #define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ #define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ #define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ #define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ #define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ #define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ #define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ #define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ /****************************\ GENERIC DRIVER DEFINITIONS \****************************/ #define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ printk(_level "ath5k %s: " _fmt, \ ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ ##__VA_ARGS__) #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ if (net_ratelimit()) \ ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ } while (0) #define ATH5K_INFO(_sc, _fmt, ...) \ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) #define ATH5K_WARN(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) #define ATH5K_ERR(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) /* * AR5K REGISTER ACCESS */ /* Some macros to read/write fields */ /* First shift, then mask */ #define AR5K_REG_SM(_val, _flags) \ (((_val) << _flags##_S) & (_flags)) /* First mask, then shift */ #define AR5K_REG_MS(_val, _flags) \ (((_val) & (_flags)) >> _flags##_S) /* Some registers can hold multiple values of interest. For this * reason when we want to write to these registers we must first * retrieve the values which we do not want to clear (lets call this * old_data) and then set the register with this and our new_value: * ( old_data | new_value) */ #define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ (((_val) << _flags##_S) & (_flags)), _reg) #define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ (_mask)) | (_flags), _reg) #define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) #define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) /* Access to PHY registers */ #define AR5K_PHY_READ(ah, _reg) \ ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) #define AR5K_PHY_WRITE(ah, _reg, _val) \ ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) /* Access QCU registers per queue */ #define AR5K_REG_READ_Q(ah, _reg, _queue) \ (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ #define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ ath5k_hw_reg_write(ah, (1 << _queue), _reg) #define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ _reg |= 1 << _queue; \ } while (0) #define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ _reg &= ~(1 << _queue); \ } while (0) /* Used while writing initvals */ #define AR5K_REG_WAIT(_i) do { \ if (_i % 64) \ udelay(1); \ } while (0) /* Register dumps are done per operation mode */ #define AR5K_INI_RFGAIN_5GHZ 0 #define AR5K_INI_RFGAIN_2GHZ 1 /* TODO: Clean this up */ #define AR5K_INI_VAL_11A 0 #define AR5K_INI_VAL_11A_TURBO 1 #define AR5K_INI_VAL_11B 2 #define AR5K_INI_VAL_11G 3 #define AR5K_INI_VAL_11G_TURBO 4 #define AR5K_INI_VAL_XR 0 #define AR5K_INI_VAL_MAX 5 /* * Some tuneable values (these should be changeable by the user) * TODO: Make use of them and add more options OR use debug/configfs */ #define AR5K_TUNE_DMA_BEACON_RESP 2 #define AR5K_TUNE_SW_BEACON_RESP 10 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 #define AR5K_TUNE_RADAR_ALERT false #define AR5K_TUNE_MIN_TX_FIFO_THRES 1 #define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) #define AR5K_TUNE_REGISTER_TIMEOUT 20000 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to * be the max value. */ #define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it * the BMISS_THRES will be seen as 0, seems harware doesn't keep * track of it. Max value depends on harware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ #define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 #define AR5K_TUNE_BEACON_INTERVAL 100 #define AR5K_TUNE_AIFS 2 #define AR5K_TUNE_AIFS_11B 2 #define AR5K_TUNE_AIFS_XR 0 #define AR5K_TUNE_CWMIN 15 #define AR5K_TUNE_CWMIN_11B 31 #define AR5K_TUNE_CWMIN_XR 3 #define AR5K_TUNE_CWMAX 1023 #define AR5K_TUNE_CWMAX_11B 1023 #define AR5K_TUNE_CWMAX_XR 7 #define AR5K_TUNE_NOISE_FLOOR -72 #define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95 #define AR5K_TUNE_MAX_TXPOWER 63 #define AR5K_TUNE_DEFAULT_TXPOWER 25 #define AR5K_TUNE_TPC_TXPOWER false #define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 10000 /* 10 sec */ #define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ #define ATH5K_TUNE_CALIBRATION_INTERVAL_NF 60000 /* 60 sec */ #define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ #define AR5K_INIT_CARR_SENSE_EN 1 /*Swap RX/TX Descriptor for big endian archs*/ #if defined(__BIG_ENDIAN) #define AR5K_INIT_CFG ( \ AR5K_CFG_SWTD | AR5K_CFG_SWRD \ ) #else #define AR5K_INIT_CFG 0x00000000 #endif /* Initial values */ #define AR5K_INIT_CYCRSSI_THR1 2 #define AR5K_INIT_TX_LATENCY 502 #define AR5K_INIT_USEC 39 #define AR5K_INIT_USEC_TURBO 79 #define AR5K_INIT_USEC_32 31 #define AR5K_INIT_SLOT_TIME 396 #define AR5K_INIT_SLOT_TIME_TURBO 480 #define AR5K_INIT_ACK_CTS_TIMEOUT 1024 #define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 #define AR5K_INIT_PROG_IFS 920 #define AR5K_INIT_PROG_IFS_TURBO 960 #define AR5K_INIT_EIFS 3440 #define AR5K_INIT_EIFS_TURBO 6880 #define AR5K_INIT_SIFS 560 #define AR5K_INIT_SIFS_TURBO 480 #define AR5K_INIT_SH_RETRY 10 #define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY #define AR5K_INIT_SSH_RETRY 32 #define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY #define AR5K_INIT_TX_RETRY 10 #define AR5K_INIT_TRANSMIT_LATENCY ( \ (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ (AR5K_INIT_USEC) \ ) #define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ (AR5K_INIT_USEC_TURBO) \ ) #define AR5K_INIT_PROTO_TIME_CNTRL ( \ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ (AR5K_INIT_PROG_IFS) \ ) #define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ (AR5K_INIT_PROG_IFS_TURBO) \ ) /* GENERIC CHIPSET DEFINITIONS */ /* MAC Chips */ enum ath5k_version { AR5K_AR5210 = 0, AR5K_AR5211 = 1, AR5K_AR5212 = 2, }; /* PHY Chips */ enum ath5k_radio { AR5K_RF5110 = 0, AR5K_RF5111 = 1, AR5K_RF5112 = 2, AR5K_RF2413 = 3, AR5K_RF5413 = 4, AR5K_RF2316 = 5, AR5K_RF2317 = 6, AR5K_RF2425 = 7, }; /* * Common silicon revision/version values */ enum ath5k_srev_type { AR5K_VERSION_MAC, AR5K_VERSION_RAD, }; struct ath5k_srev_name { const char *sr_name; enum ath5k_srev_type sr_type; u_int sr_val; }; #define AR5K_SREV_UNKNOWN 0xffff #define AR5K_SREV_AR5210 0x00 /* Crete */ #define AR5K_SREV_AR5311 0x10 /* Maui 1 */ #define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ #define AR5K_SREV_AR5311B 0x30 /* Spirit */ #define AR5K_SREV_AR5211 0x40 /* Oahu */ #define AR5K_SREV_AR5212 0x50 /* Venice */ #define AR5K_SREV_AR5212_V4 0x54 /* ??? */ #define AR5K_SREV_AR5213 0x55 /* ??? */ #define AR5K_SREV_AR5213A 0x59 /* Hainan */ #define AR5K_SREV_AR2413 0x78 /* Griffin lite */ #define AR5K_SREV_AR2414 0x70 /* Griffin */ #define AR5K_SREV_AR5424 0x90 /* Condor */ #define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ #define AR5K_SREV_AR5414 0xa0 /* Eagle */ #define AR5K_SREV_AR2415 0xb0 /* Talon */ #define AR5K_SREV_AR5416 0xc0 /* PCI-E */ #define AR5K_SREV_AR5418 0xca /* PCI-E */ #define AR5K_SREV_AR2425 0xe0 /* Swan */ #define AR5K_SREV_AR2417 0xf0 /* Nala */ #define AR5K_SREV_RAD_5110 0x00 #define AR5K_SREV_RAD_5111 0x10 #define AR5K_SREV_RAD_5111A 0x15 #define AR5K_SREV_RAD_2111 0x20 #define AR5K_SREV_RAD_5112 0x30 #define AR5K_SREV_RAD_5112A 0x35 #define AR5K_SREV_RAD_5112B 0x36 #define AR5K_SREV_RAD_2112 0x40 #define AR5K_SREV_RAD_2112A 0x45 #define AR5K_SREV_RAD_2112B 0x46 #define AR5K_SREV_RAD_2413 0x50 #define AR5K_SREV_RAD_5413 0x60 #define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ #define AR5K_SREV_RAD_2317 0x80 #define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ #define AR5K_SREV_RAD_2425 0xa2 #define AR5K_SREV_RAD_5133 0xc0 #define AR5K_SREV_PHY_5211 0x30 #define AR5K_SREV_PHY_5212 0x41 #define AR5K_SREV_PHY_5212A 0x42 #define AR5K_SREV_PHY_5212B 0x43 #define AR5K_SREV_PHY_2413 0x45 #define AR5K_SREV_PHY_5413 0x61 #define AR5K_SREV_PHY_2425 0x70 /* TODO add support to mac80211 for vendor-specific rates and modes */ /* * Some of this information is based on Documentation from: * * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG * * Modulation for Atheros' eXtended Range - range enhancing extension that is * supposed to double the distance an Atheros client device can keep a * connection with an Atheros access point. This is achieved by increasing * the receiver sensitivity up to, -105dBm, which is about 20dB above what * the 802.11 specifications demand. In addition, new (proprietary) data rates * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. * * Please note that can you either use XR or TURBO but you cannot use both, * they are exclusive. * */ #define MODULATION_XR 0x00000200 /* * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s * signaling rate achieved through the bonding of two 54Mbit/s 802.11g * channels. To use this feature your Access Point must also suport it. * There is also a distinction between "static" and "dynamic" turbo modes: * * - Static: is the dumb version: devices set to this mode stick to it until * the mode is turned off. * - Dynamic: is the intelligent version, the network decides itself if it * is ok to use turbo. As soon as traffic is detected on adjacent channels * (which would get used in turbo mode), or when a non-turbo station joins * the network, turbo mode won't be used until the situation changes again. * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which * monitors the used radio band in order to decide whether turbo mode may * be used or not. * * This article claims Super G sticks to bonding of channels 5 and 6 for * USA: * * http://www.pcworld.com/article/id,113428-page,1/article.html * * The channel bonding seems to be driver specific though. In addition to * deciding what channels will be used, these "Turbo" modes are accomplished * by also enabling the following features: * * - Bursting: allows multiple frames to be sent at once, rather than pausing * after each frame. Bursting is a standards-compliant feature that can be * used with any Access Point. * - Fast frames: increases the amount of information that can be sent per * frame, also resulting in a reduction of transmission overhead. It is a * proprietary feature that needs to be supported by the Access Point. * - Compression: data frames are compressed in real time using a Lempel Ziv * algorithm. This is done transparently. Once this feature is enabled, * compression and decompression takes place inside the chipset, without * putting additional load on the host CPU. * */ #define MODULATION_TURBO 0x00000080 enum ath5k_driver_mode { AR5K_MODE_11A = 0, AR5K_MODE_11A_TURBO = 1, AR5K_MODE_11B = 2, AR5K_MODE_11G = 3, AR5K_MODE_11G_TURBO = 4, AR5K_MODE_XR = 0, AR5K_MODE_MAX = 5 }; enum ath5k_ant_mode { AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */ AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */ AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */ AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */ AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */ AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */ AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */ AR5K_ANTMODE_MAX, }; /****************\ TX DEFINITIONS \****************/ /* * TX Status descriptor */ struct ath5k_tx_status { u16 ts_seqnum; u16 ts_tstamp; u8 ts_status; u8 ts_rate[4]; u8 ts_retry[4]; u8 ts_final_idx; s8 ts_rssi; u8 ts_shortretry; u8 ts_longretry; u8 ts_virtcol; u8 ts_antenna; }; #define AR5K_TXSTAT_ALTRATE 0x80 #define AR5K_TXERR_XRETRY 0x01 #define AR5K_TXERR_FILT 0x02 #define AR5K_TXERR_FIFO 0x04 /** * enum ath5k_tx_queue - Queue types used to classify tx queues. * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue * @AR5K_TX_QUEUE_DATA: A normal data queue * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue * @AR5K_TX_QUEUE_BEACON: The beacon queue * @AR5K_TX_QUEUE_CAB: The after-beacon queue * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue */ enum ath5k_tx_queue { AR5K_TX_QUEUE_INACTIVE = 0, AR5K_TX_QUEUE_DATA, AR5K_TX_QUEUE_XR_DATA, AR5K_TX_QUEUE_BEACON, AR5K_TX_QUEUE_CAB, AR5K_TX_QUEUE_UAPSD, }; #define AR5K_NUM_TX_QUEUES 10 #define AR5K_NUM_TX_QUEUES_NOQCU 2 /* * Queue syb-types to classify normal data queues. * These are the 4 Access Categories as defined in * WME spec. 0 is the lowest priority and 4 is the * highest. Normal data that hasn't been classified * goes to the Best Effort AC. */ enum ath5k_tx_queue_subtype { AR5K_WME_AC_BK = 0, /*Background traffic*/ AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ AR5K_WME_AC_VI, /*Video traffic*/ AR5K_WME_AC_VO, /*Voice traffic*/ }; /* * Queue ID numbers as returned by the hw functions, each number * represents a hw queue. If hw does not support hw queues * (eg 5210) all data goes in one queue. These match * d80211 definitions (net80211/MadWiFi don't use them). */ enum ath5k_tx_queue_id { AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ AR5K_TX_QUEUE_ID_UAPSD = 8, AR5K_TX_QUEUE_ID_XR_DATA = 9, }; /* * Flags to set hw queue's parameters... */ #define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ #define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ #define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ #define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ #define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ #define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ #define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ #define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ /* * A struct to hold tx queue's parameters */ struct ath5k_txq_info { enum ath5k_tx_queue tqi_type; enum ath5k_tx_queue_subtype tqi_subtype; u16 tqi_flags; /* Tx queue flags (see above) */ u8 tqi_aifs; /* Arbitrated Interframe Space */ u16 tqi_cw_min; /* Minimum Contention Window */ u16 tqi_cw_max; /* Maximum Contention Window */ u32 tqi_cbr_period; /* Constant bit rate period */ u32 tqi_cbr_overflow_limit; u32 tqi_burst_time; u32 tqi_ready_time; /* Time queue waits after an event */ }; /* * Transmit packet types. * used on tx control descriptor */ enum ath5k_pkt_type { AR5K_PKT_TYPE_NORMAL = 0, AR5K_PKT_TYPE_ATIM = 1, AR5K_PKT_TYPE_PSPOLL = 2, AR5K_PKT_TYPE_BEACON = 3, AR5K_PKT_TYPE_PROBE_RESP = 4, AR5K_PKT_TYPE_PIFS = 5, }; /* * TX power and TPC settings */ #define AR5K_TXPOWER_OFDM(_r, _v) ( \ ((0 & 1) << ((_v) + 6)) | \ (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ ) #define AR5K_TXPOWER_CCK(_r, _v) ( \ (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ ) /* * DMA size definitions (2^(n+2)) */ enum ath5k_dmasize { AR5K_DMASIZE_4B = 0, AR5K_DMASIZE_8B, AR5K_DMASIZE_16B, AR5K_DMASIZE_32B, AR5K_DMASIZE_64B, AR5K_DMASIZE_128B, AR5K_DMASIZE_256B, AR5K_DMASIZE_512B }; /****************\ RX DEFINITIONS \****************/ /* * RX Status descriptor */ struct ath5k_rx_status { u16 rs_datalen; u16 rs_tstamp; u8 rs_status; u8 rs_phyerr; s8 rs_rssi; u8 rs_keyix; u8 rs_rate; u8 rs_antenna; u8 rs_more; }; #define AR5K_RXERR_CRC 0x01 #define AR5K_RXERR_PHY 0x02 #define AR5K_RXERR_FIFO 0x04 #define AR5K_RXERR_DECRYPT 0x08 #define AR5K_RXERR_MIC 0x10 #define AR5K_RXKEYIX_INVALID ((u8) - 1) #define AR5K_TXKEYIX_INVALID ((u32) - 1) /**************************\ BEACON TIMERS DEFINITIONS \**************************/ #define AR5K_BEACON_PERIOD 0x0000ffff #define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ #define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ /* * TSF to TU conversion: * * TSF is a 64bit value in usec (microseconds). * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). */ #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) /*******************************\ GAIN OPTIMIZATION DEFINITIONS \*******************************/ enum ath5k_rfgain { AR5K_RFGAIN_INACTIVE = 0, AR5K_RFGAIN_ACTIVE, AR5K_RFGAIN_READ_REQUESTED, AR5K_RFGAIN_NEED_CHANGE, }; struct ath5k_gain { u8 g_step_idx; u8 g_current; u8 g_target; u8 g_low; u8 g_high; u8 g_f_corr; u8 g_state; }; /********************\ COMMON DEFINITIONS \********************/ #define AR5K_SLOT_TIME_9 396 #define AR5K_SLOT_TIME_20 880 #define AR5K_SLOT_TIME_MAX 0xffff /* channel_flags */ #define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ #define CHANNEL_TURBO 0x0010 /* Turbo Channel */ #define CHANNEL_CCK 0x0020 /* CCK channel */ #define CHANNEL_OFDM 0x0040 /* OFDM channel */ #define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ #define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ #define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ #define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ #define CHANNEL_XR 0x0800 /* XR channel */ #define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) #define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) #define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) #define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) #define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) #define CHANNEL_108A CHANNEL_T #define CHANNEL_108G CHANNEL_TG #define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) #define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ CHANNEL_TURBO) #define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) #define CHANNEL_MODES CHANNEL_ALL /* * Used internaly for reset_tx_queue). * Also see struct struct ieee80211_channel. */ #define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0) #define IS_CHAN_B(_c) ((_c->hw_value & CHANNEL_B) != 0) /* * The following structure is used to map 2GHz channels to * 5GHz Atheros channels. * TODO: Clean up */ struct ath5k_athchan_2ghz { u32 a2_flags; u16 a2_athchan; }; /******************\ RATE DEFINITIONS \******************/ /** * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. * * The rate code is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control * and settings. * * This is the hardware rate map we are aware of: * * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 * rate_kbps 3000 1000 ? ? ? 2000 500 48000 * * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? * * rate_code 17 18 19 20 21 22 23 24 * rate_kbps ? ? ? ? ? ? ? 11000 * * rate_code 25 26 27 28 29 30 31 32 * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? * * "S" indicates CCK rates with short preamble. * * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the * lowest 4 bits, so they are the same as below with a 0xF mask. * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). * We handle this in ath5k_setup_bands(). */ #define AR5K_MAX_RATES 32 /* B */ #define ATH5K_RATE_CODE_1M 0x1B #define ATH5K_RATE_CODE_2M 0x1A #define ATH5K_RATE_CODE_5_5M 0x19 #define ATH5K_RATE_CODE_11M 0x18 /* A and G */ #define ATH5K_RATE_CODE_6M 0x0B #define ATH5K_RATE_CODE_9M 0x0F #define ATH5K_RATE_CODE_12M 0x0A #define ATH5K_RATE_CODE_18M 0x0E #define ATH5K_RATE_CODE_24M 0x09 #define ATH5K_RATE_CODE_36M 0x0D #define ATH5K_RATE_CODE_48M 0x08 #define ATH5K_RATE_CODE_54M 0x0C /* XR */ #define ATH5K_RATE_CODE_XR_500K 0x07 #define ATH5K_RATE_CODE_XR_1M 0x02 #define ATH5K_RATE_CODE_XR_2M 0x06 #define ATH5K_RATE_CODE_XR_3M 0x01 /* adding this flag to rate_code enables short preamble */ #define AR5K_SET_SHORT_PREAMBLE 0x04 /* * Crypto definitions */ #define AR5K_KEYCACHE_SIZE 8 /***********************\ HW RELATED DEFINITIONS \***********************/ /* * Misc definitions */ #define AR5K_RSSI_EP_MULTIPLIER (1<<7) #define AR5K_ASSERT_ENTRY(_e, _s) do { \ if (_e >= _s) \ return (false); \ } while (0) /* * Hardware interrupt abstraction */ /** * enum ath5k_int - Hardware interrupt masks helpers * * @AR5K_INT_RX: mask to identify received frame interrupts, of type * AR5K_ISR_RXOK or AR5K_ISR_RXERR * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) * @AR5K_INT_RXNOFRM: No frame received (?) * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's * LinkPtr is NULL. For more details, refer to: * http://www.freepatentsonline.com/20030225739.html * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). * Note that Rx overrun is not always fatal, on some chips we can continue * operation without reseting the card, that's why int_fatal is not * common for all chips. * @AR5K_INT_TX: mask to identify received frame interrupts, of type * AR5K_ISR_TXOK or AR5K_ISR_TXERR * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold * We currently do increments on interrupt by * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or * one of the PHY error counters reached the maximum value and should be * read and cleared. * @AR5K_INT_RXPHY: RX PHY Error * @AR5K_INT_RXKCM: RX Key cache miss * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a * beacon that must be handled in software. The alternative is if you * have VEOL support, in that case you let the hardware deal with things. * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing * beacons from the AP have associated with, we should probably try to * reassociate. When in IBSS mode this might mean we have not received * any beacons from any local stations. Note that every station in an * IBSS schedules to send beacons at the Target Beacon Transmission Time * (TBTT) with a random backoff. * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now * until properly handled * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA * errors. These types of errors we can enable seem to be of type * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. * @AR5K_INT_GLOBAL: Used to clear and set the IER * @AR5K_INT_NOCARD: signals the card has been removed * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same * bit value * * These are mapped to take advantage of some common bits * between the MACs, to be able to set intr properties * easier. Some of them are not used yet inside hw.c. Most map * to the respective hw interrupt value as they are common amogst different * MACs. */ enum ath5k_int { AR5K_INT_RXOK = 0x00000001, AR5K_INT_RXDESC = 0x00000002, AR5K_INT_RXERR = 0x00000004, AR5K_INT_RXNOFRM = 0x00000008, AR5K_INT_RXEOL = 0x00000010, AR5K_INT_RXORN = 0x00000020, AR5K_INT_TXOK = 0x00000040, AR5K_INT_TXDESC = 0x00000080, AR5K_INT_TXERR = 0x00000100, AR5K_INT_TXNOFRM = 0x00000200, AR5K_INT_TXEOL = 0x00000400, AR5K_INT_TXURN = 0x00000800, AR5K_INT_MIB = 0x00001000, AR5K_INT_SWI = 0x00002000, AR5K_INT_RXPHY = 0x00004000, AR5K_INT_RXKCM = 0x00008000, AR5K_INT_SWBA = 0x00010000, AR5K_INT_BRSSI = 0x00020000, AR5K_INT_BMISS = 0x00040000, AR5K_INT_FATAL = 0x00080000, /* Non common */ AR5K_INT_BNR = 0x00100000, /* Non common */ AR5K_INT_TIM = 0x00200000, /* Non common */ AR5K_INT_DTIM = 0x00400000, /* Non common */ AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ AR5K_INT_GPIO = 0x01000000, AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ AR5K_INT_QCBRORN = 0x10000000, /* Non common */ AR5K_INT_QCBRURN = 0x20000000, /* Non common */ AR5K_INT_QTRIG = 0x40000000, /* Non common */ AR5K_INT_GLOBAL = 0x80000000, AR5K_INT_COMMON = AR5K_INT_RXOK | AR5K_INT_RXDESC | AR5K_INT_RXERR | AR5K_INT_RXNOFRM | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXOK | AR5K_INT_TXDESC | AR5K_INT_TXERR | AR5K_INT_TXNOFRM | AR5K_INT_TXEOL | AR5K_INT_TXURN | AR5K_INT_MIB | AR5K_INT_SWI | AR5K_INT_RXPHY | AR5K_INT_RXKCM | AR5K_INT_SWBA | AR5K_INT_BRSSI | AR5K_INT_BMISS | AR5K_INT_GPIO | AR5K_INT_GLOBAL, AR5K_INT_NOCARD = 0xffffffff }; /* mask which calibration is active at the moment */ enum ath5k_calibration_mask { AR5K_CALIBRATION_FULL = 0x01, AR5K_CALIBRATION_SHORT = 0x02, AR5K_CALIBRATION_ANI = 0x04, }; /* * Power management */ enum ath5k_power_mode { AR5K_PM_UNDEFINED = 0, AR5K_PM_AUTO, AR5K_PM_AWAKE, AR5K_PM_FULL_SLEEP, AR5K_PM_NETWORK_SLEEP, }; /* * These match net80211 definitions (not used in * mac80211). * TODO: Clean this up */ #define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ #define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ #define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ #define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ #define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ /* GPIO-controlled software LED */ #define AR5K_SOFTLED_PIN 0 #define AR5K_SOFTLED_ON 0 #define AR5K_SOFTLED_OFF 1 /* * Chipset capabilities -see ath5k_hw_get_capability- * get_capability function is not yet fully implemented * in ath5k so most of these don't work yet... * TODO: Implement these & merge with _TUNE_ stuff above */ enum ath5k_capability_type { AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ AR5K_CAP_COMPRESSION = 8, /* Supports compression */ AR5K_CAP_BURST = 9, /* Supports packet bursting */ AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ AR5K_CAP_XR = 16, /* Supports XR mode */ AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ }; /* XXX: we *may* move cap_range stuff to struct wiphy */ struct ath5k_capabilities { /* * Supported PHY modes * (ie. CHANNEL_A, CHANNEL_B, ...) */ DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); /* * Frequency range (without regulation restrictions) */ struct { u16 range_2ghz_min; u16 range_2ghz_max; u16 range_5ghz_min; u16 range_5ghz_max; } cap_range; /* * Values stored in the EEPROM (some of them...) */ struct ath5k_eeprom_info cap_eeprom; /* * Queue information */ struct { u8 q_tx_num; } cap_queues; bool cap_has_phyerr_counters; }; /* size of noise floor history (keep it a power of two) */ #define ATH5K_NF_CAL_HIST_MAX 8 struct ath5k_nfcal_hist { s16 index; /* current index into nfval */ s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ }; /** * struct avg_val - Helper structure for average calculation * @avg: contains the actual average value * @avg_weight: is used internally during calculation to prevent rounding errors */ struct ath5k_avg_val { int avg; int avg_weight; }; /***************************************\ HARDWARE ABSTRACTION LAYER STRUCTURE \***************************************/ /* * Misc defines */ #define AR5K_MAX_GPIO 10 #define AR5K_MAX_RF_BANKS 8 /* TODO: Clean up and merge with ath5k_softc */ struct ath5k_hw { struct ath_common common; struct ath5k_softc *ah_sc; void __iomem *ah_iobase; enum ath5k_int ah_imr; struct ieee80211_channel *ah_current_channel; bool ah_turbo; bool ah_calibration; bool ah_single_chip; enum ath5k_version ah_version; enum ath5k_radio ah_radio; u32 ah_phy; u32 ah_mac_srev; u16 ah_mac_version; u16 ah_phy_revision; u16 ah_radio_5ghz_revision; u16 ah_radio_2ghz_revision; #define ah_modes ah_capabilities.cap_mode #define ah_ee_version ah_capabilities.cap_eeprom.ee_version u32 ah_limit_tx_retries; u8 ah_coverage_class; /* Antenna Control */ u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; u8 ah_ant_mode; u8 ah_tx_ant; u8 ah_def_ant; bool ah_software_retry; struct ath5k_capabilities ah_capabilities; struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; u32 ah_txq_status; u32 ah_txq_imr_txok; u32 ah_txq_imr_txerr; u32 ah_txq_imr_txurn; u32 ah_txq_imr_txdesc; u32 ah_txq_imr_txeol; u32 ah_txq_imr_cbrorn; u32 ah_txq_imr_cbrurn; u32 ah_txq_imr_qtrig; u32 ah_txq_imr_nofrm; u32 ah_txq_isr; u32 *ah_rf_banks; size_t ah_rf_banks_size; size_t ah_rf_regs_count; struct ath5k_gain ah_gain; u8 ah_offset[AR5K_MAX_RF_BANKS]; struct { /* Temporary tables used for interpolation */ u8 tmpL[AR5K_EEPROM_N_PD_GAINS] [AR5K_EEPROM_POWER_TABLE_SIZE]; u8 tmpR[AR5K_EEPROM_N_PD_GAINS] [AR5K_EEPROM_POWER_TABLE_SIZE]; u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; u16 txp_rates_power_table[AR5K_MAX_RATES]; u8 txp_min_idx; bool txp_tpc; /* Values in 0.25dB units */ s16 txp_min_pwr; s16 txp_max_pwr; /* Values in 0.5dB units */ s16 txp_offset; s16 txp_ofdm; s16 txp_cck_ofdm_gainf_delta; /* Value in dB units */ s16 txp_cck_ofdm_pwr_delta; } ah_txpower; struct { bool r_enabled; int r_last_alert; struct ieee80211_channel r_last_channel; } ah_radar; struct ath5k_nfcal_hist ah_nfcal_hist; /* average beacon RSSI in our BSS (used by ANI) */ struct ath5k_avg_val ah_beacon_rssi_avg; /* noise floor from last periodic calibration */ s32 ah_noise_floor; /* Calibration timestamp */ unsigned long ah_cal_next_full; unsigned long ah_cal_next_ani; unsigned long ah_cal_next_nf; /* Calibration mask */ u8 ah_cal_mask; /* * Function pointers */ int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, int, enum ath5k_pkt_type, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, struct ath5k_tx_status *); int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, struct ath5k_rx_status *); }; /* * Prototypes */ /* Attach/Detach Functions */ int ath5k_hw_attach(struct ath5k_softc *sc); void ath5k_hw_detach(struct ath5k_hw *ah); int ath5k_sysfs_register(struct ath5k_softc *sc); void ath5k_sysfs_unregister(struct ath5k_softc *sc); /* LED functions */ int ath5k_init_leds(struct ath5k_softc *sc); void ath5k_led_enable(struct ath5k_softc *sc); void ath5k_led_off(struct ath5k_softc *sc); void ath5k_unregister_leds(struct ath5k_softc *sc); /* Reset Functions */ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); int ath5k_hw_on_hold(struct ath5k_hw *ah); int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel); int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); /* Power management functions */ /* DMA Related Functions */ void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); /* Interrupt handling */ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); /* EEPROM access functions */ int ath5k_eeprom_init(struct ath5k_hw *ah); void ath5k_eeprom_detach(struct ath5k_hw *ah); int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); /* Protocol Control Unit Functions */ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); /* BSSID Functions */ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); void ath5k_hw_set_bssid(struct ath5k_hw *ah); void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); /* Receive start/stop functions */ void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); /* RX Filter functions */ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); /* Beacon control functions */ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); void ath5k_hw_reset_tsf(struct ath5k_hw *ah); void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); /* ACK bit rate */ void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); /* Clock rate related functions */ unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); void ath5k_hw_set_clockrate(struct ath5k_hw *ah); /* Queue Control Unit, DFS Control Unit Functions */ int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info); int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); /* Hardware Descriptor Functions */ int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags); int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); /* GPIO Functions */ void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); /* rfkill Functions */ void ath5k_rfkill_hw_start(struct ath5k_hw *ah); void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); /* Misc functions */ int ath5k_hw_set_capabilities(struct ath5k_hw *ah); int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); /* Initial register settings functions */ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); /* Initialize RF */ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode); int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq); enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); /* PHY/RF channel functions */ bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* PHY calibration */ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); /* Spur mitigation */ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, struct ieee80211_channel *channel); void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* Misc PHY functions */ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* Antenna control */ void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); /* TX power setup */ int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower); int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); /* * Functions used internaly */ static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) { return &ah->common; } static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) { return &(ath5k_hw_common(ah)->regulatory); } static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) { return ioread32(ah->ah_iobase + reg); } static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) { iowrite32(val, ah->ah_iobase + reg); } static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) { u32 retval = 0, bit, i; for (i = 0; i < bits; i++) { bit = (val >> i) & 1; retval = (retval << 1) | bit; } return retval; } #define AVG_SAMPLES 8 #define AVG_FACTOR 1000 /** * ath5k_moving_average - Exponentially weighted moving average * @avg: average structure * @val: current value * * This implementation make use of a struct ath5k_avg_val to prevent rounding * errors. */ static inline struct ath5k_avg_val ath5k_moving_average(const struct ath5k_avg_val avg, const int val) { struct ath5k_avg_val new; new.avg_weight = avg.avg_weight ? (((avg.avg_weight * ((AVG_SAMPLES) - 1)) + (val * (AVG_FACTOR))) / (AVG_SAMPLES)) : (val * (AVG_FACTOR)); new.avg = new.avg_weight / (AVG_FACTOR); return new; } #endif