/* Broadcom B43 wireless driver Common PHY routines Copyright (c) 2005 Martin Langer , Copyright (c) 2005-2007 Stefano Brivio Copyright (c) 2005-2008 Michael Buesch Copyright (c) 2005, 2006 Danny van Dyk Copyright (c) 2005, 2006 Andreas Jaggi This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, Boston, MA 02110-1301, USA. */ #include "phy_common.h" #include "phy_g.h" #include "phy_a.h" #include "phy_n.h" #include "phy_lp.h" #include "phy_ht.h" #include "phy_lcn.h" #include "b43.h" #include "main.h" int b43_phy_allocate(struct b43_wldev *dev) { struct b43_phy *phy = &(dev->phy); int err; phy->ops = NULL; switch (phy->type) { case B43_PHYTYPE_A: phy->ops = &b43_phyops_a; break; case B43_PHYTYPE_G: phy->ops = &b43_phyops_g; break; case B43_PHYTYPE_N: #ifdef CONFIG_B43_PHY_N phy->ops = &b43_phyops_n; #endif break; case B43_PHYTYPE_LP: #ifdef CONFIG_B43_PHY_LP phy->ops = &b43_phyops_lp; #endif break; case B43_PHYTYPE_HT: #ifdef CONFIG_B43_PHY_HT phy->ops = &b43_phyops_ht; #endif break; case B43_PHYTYPE_LCN: #ifdef CONFIG_B43_PHY_LCN phy->ops = &b43_phyops_lcn; #endif break; } if (B43_WARN_ON(!phy->ops)) return -ENODEV; err = phy->ops->allocate(dev); if (err) phy->ops = NULL; return err; } void b43_phy_free(struct b43_wldev *dev) { dev->phy.ops->free(dev); dev->phy.ops = NULL; } int b43_phy_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; const struct b43_phy_operations *ops = phy->ops; int err; phy->channel = ops->get_default_chan(dev); ops->software_rfkill(dev, false); err = ops->init(dev); if (err) { b43err(dev->wl, "PHY init failed\n"); goto err_block_rf; } /* Make sure to switch hardware and firmware (SHM) to * the default channel. */ err = b43_switch_channel(dev, ops->get_default_chan(dev)); if (err) { b43err(dev->wl, "PHY init: Channel switch to default failed\n"); goto err_phy_exit; } return 0; err_phy_exit: if (ops->exit) ops->exit(dev); err_block_rf: ops->software_rfkill(dev, true); return err; } void b43_phy_exit(struct b43_wldev *dev) { const struct b43_phy_operations *ops = dev->phy.ops; ops->software_rfkill(dev, true); if (ops->exit) ops->exit(dev); } bool b43_has_hardware_pctl(struct b43_wldev *dev) { if (!dev->phy.hardware_power_control) return false; if (!dev->phy.ops->supports_hwpctl) return false; return dev->phy.ops->supports_hwpctl(dev); } void b43_radio_lock(struct b43_wldev *dev) { u32 macctl; #if B43_DEBUG B43_WARN_ON(dev->phy.radio_locked); dev->phy.radio_locked = true; #endif macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl |= B43_MACCTL_RADIOLOCK; b43_write32(dev, B43_MMIO_MACCTL, macctl); /* Commit the write and wait for the firmware * to finish any radio register access. */ b43_read32(dev, B43_MMIO_MACCTL); udelay(10); } void b43_radio_unlock(struct b43_wldev *dev) { u32 macctl; #if B43_DEBUG B43_WARN_ON(!dev->phy.radio_locked); dev->phy.radio_locked = false; #endif /* Commit any write */ b43_read16(dev, B43_MMIO_PHY_VER); /* unlock */ macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_RADIOLOCK; b43_write32(dev, B43_MMIO_MACCTL, macctl); } void b43_phy_lock(struct b43_wldev *dev) { #if B43_DEBUG B43_WARN_ON(dev->phy.phy_locked); dev->phy.phy_locked = true; #endif B43_WARN_ON(dev->dev->core_rev < 3); if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); } void b43_phy_unlock(struct b43_wldev *dev) { #if B43_DEBUG B43_WARN_ON(!dev->phy.phy_locked); dev->phy.phy_locked = false; #endif B43_WARN_ON(dev->dev->core_rev < 3); if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) b43_power_saving_ctl_bits(dev, 0); } static inline void assert_mac_suspended(struct b43_wldev *dev) { if (!B43_DEBUG) return; if ((b43_status(dev) >= B43_STAT_INITIALIZED) && (dev->mac_suspended <= 0)) { b43dbg(dev->wl, "PHY/RADIO register access with " "enabled MAC.\n"); dump_stack(); } } u16 b43_radio_read(struct b43_wldev *dev, u16 reg) { assert_mac_suspended(dev); return dev->phy.ops->radio_read(dev, reg); } void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value) { assert_mac_suspended(dev); dev->phy.ops->radio_write(dev, reg, value); } void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) { b43_radio_write16(dev, offset, b43_radio_read16(dev, offset) & mask); } void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) { b43_radio_write16(dev, offset, b43_radio_read16(dev, offset) | set); } void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) { b43_radio_write16(dev, offset, (b43_radio_read16(dev, offset) & mask) | set); } bool b43_radio_wait_value(struct b43_wldev *dev, u16 offset, u16 mask, u16 value, int delay, int timeout) { u16 val; int i; for (i = 0; i < timeout; i += delay) { val = b43_radio_read(dev, offset); if ((val & mask) == value) return true; udelay(delay); } return false; } u16 b43_phy_read(struct b43_wldev *dev, u16 reg) { assert_mac_suspended(dev); dev->phy.writes_counter = 0; return dev->phy.ops->phy_read(dev, reg); } void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value) { assert_mac_suspended(dev); dev->phy.ops->phy_write(dev, reg, value); if (++dev->phy.writes_counter == B43_MAX_WRITES_IN_ROW) { b43_read16(dev, B43_MMIO_PHY_VER); dev->phy.writes_counter = 0; } } void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg) { assert_mac_suspended(dev); dev->phy.ops->phy_write(dev, destreg, dev->phy.ops->phy_read(dev, srcreg)); } void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) { if (dev->phy.ops->phy_maskset) { assert_mac_suspended(dev); dev->phy.ops->phy_maskset(dev, offset, mask, 0); } else { b43_phy_write(dev, offset, b43_phy_read(dev, offset) & mask); } } void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) { if (dev->phy.ops->phy_maskset) { assert_mac_suspended(dev); dev->phy.ops->phy_maskset(dev, offset, 0xFFFF, set); } else { b43_phy_write(dev, offset, b43_phy_read(dev, offset) | set); } } void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) { if (dev->phy.ops->phy_maskset) { assert_mac_suspended(dev); dev->phy.ops->phy_maskset(dev, offset, mask, set); } else { b43_phy_write(dev, offset, (b43_phy_read(dev, offset) & mask) | set); } } int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel) { struct b43_phy *phy = &(dev->phy); u16 channelcookie, savedcookie; int err; if (new_channel == B43_DEFAULT_CHANNEL) new_channel = phy->ops->get_default_chan(dev); /* First we set the channel radio code to prevent the * firmware from sending ghost packets. */ channelcookie = new_channel; if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) channelcookie |= B43_SHM_SH_CHAN_5GHZ; /* FIXME: set 40Mhz flag if required */ if (0) channelcookie |= B43_SHM_SH_CHAN_40MHZ; savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); /* Now try to switch the PHY hardware channel. */ err = phy->ops->switch_channel(dev, new_channel); if (err) goto err_restore_cookie; dev->phy.channel = new_channel; /* Wait for the radio to tune to the channel and stabilize. */ msleep(8); return 0; err_restore_cookie: b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, savedcookie); return err; } void b43_software_rfkill(struct b43_wldev *dev, bool blocked) { struct b43_phy *phy = &dev->phy; b43_mac_suspend(dev); phy->ops->software_rfkill(dev, blocked); phy->radio_on = !blocked; b43_mac_enable(dev); } /** * b43_phy_txpower_adjust_work - TX power workqueue. * * Workqueue for updating the TX power parameters in hardware. */ void b43_phy_txpower_adjust_work(struct work_struct *work) { struct b43_wl *wl = container_of(work, struct b43_wl, txpower_adjust_work); struct b43_wldev *dev; mutex_lock(&wl->mutex); dev = wl->current_dev; if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED))) dev->phy.ops->adjust_txpower(dev); mutex_unlock(&wl->mutex); } void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags) { struct b43_phy *phy = &dev->phy; unsigned long now = jiffies; enum b43_txpwr_result result; if (!(flags & B43_TXPWR_IGNORE_TIME)) { /* Check if it's time for a TXpower check. */ if (time_before(now, phy->next_txpwr_check_time)) return; /* Not yet */ } /* The next check will be needed in two seconds, or later. */ phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2)); if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && (dev->dev->board_type == SSB_BOARD_BU4306)) return; /* No software txpower adjustment needed */ result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI)); if (result == B43_TXPWR_RES_DONE) return; /* We are done. */ B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST); B43_WARN_ON(phy->ops->adjust_txpower == NULL); /* We must adjust the transmission power in hardware. * Schedule b43_phy_txpower_adjust_work(). */ ieee80211_queue_work(dev->wl->hw, &dev->wl->txpower_adjust_work); } int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset) { const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK); unsigned int a, b, c, d; unsigned int average; u32 tmp; tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset); a = tmp & 0xFF; b = (tmp >> 8) & 0xFF; c = (tmp >> 16) & 0xFF; d = (tmp >> 24) & 0xFF; if (a == 0 || a == B43_TSSI_MAX || b == 0 || b == B43_TSSI_MAX || c == 0 || c == B43_TSSI_MAX || d == 0 || d == B43_TSSI_MAX) return -ENOENT; /* The values are OK. Clear them. */ tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) | (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24); b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp); if (is_ofdm) { a = (a + 32) & 0x3F; b = (b + 32) & 0x3F; c = (c + 32) & 0x3F; d = (d + 32) & 0x3F; } /* Get the average of the values with 0.5 added to each value. */ average = (a + b + c + d + 2) / 4; if (is_ofdm) { /* Adjust for CCK-boost */ if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1) & B43_HF_CCKBOOST) average = (average >= 13) ? (average - 13) : 0; } return average; } void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on) { b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); } bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type) { return (channel_type == NL80211_CHAN_HT40MINUS || channel_type == NL80211_CHAN_HT40PLUS); } /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */ void b43_phy_force_clock(struct b43_wldev *dev, bool force) { u32 tmp; WARN_ON(dev->phy.type != B43_PHYTYPE_N && dev->phy.type != B43_PHYTYPE_HT); switch (dev->dev->bus_type) { #ifdef CONFIG_B43_BCMA case B43_BUS_BCMA: tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL); if (force) tmp |= BCMA_IOCTL_FGC; else tmp &= ~BCMA_IOCTL_FGC; bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp); break; #endif #ifdef CONFIG_B43_SSB case B43_BUS_SSB: tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW); if (force) tmp |= SSB_TMSLOW_FGC; else tmp &= ~SSB_TMSLOW_FGC; ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp); break; #endif } } /* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */ struct b43_c32 b43_cordic(int theta) { static const u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304, 58666, 29335, 14668, 7334, 3667, 1833, 917, 458, 229, 115, 57, 29, }; u8 i; s32 tmp; s8 signx = 1; u32 angle = 0; struct b43_c32 ret = { .i = 39797, .q = 0, }; while (theta > (180 << 16)) theta -= (360 << 16); while (theta < -(180 << 16)) theta += (360 << 16); if (theta > (90 << 16)) { theta -= (180 << 16); signx = -1; } else if (theta < -(90 << 16)) { theta += (180 << 16); signx = -1; } for (i = 0; i <= 17; i++) { if (theta > angle) { tmp = ret.i - (ret.q >> i); ret.q += ret.i >> i; ret.i = tmp; angle += arctg[i]; } else { tmp = ret.i + (ret.q >> i); ret.q -= ret.i >> i; ret.i = tmp; angle -= arctg[i]; } } ret.i *= signx; ret.q *= signx; return ret; }