/****************************************************************************** * * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * *****************************************************************************/ /* * Please use this file (iwl-dev.h) for driver implementation definitions. * Please use iwl-commands.h for uCode API definitions. * Please use iwl-4965-hw.h for hardware-related definitions. */ #ifndef __il_dev_h__ #define __il_dev_h__ #include #include /* for struct pci_device_id */ #include #include #include #include #include "iwl-eeprom.h" #include "iwl-csr.h" #include "iwl-prph.h" #include "iwl-fh.h" #include "iwl-debug.h" #include "iwl-4965-hw.h" #include "iwl-3945-hw.h" #include "iwl-led.h" #include "iwl-power.h" #include "iwl-legacy-rs.h" struct il_tx_queue; /* CT-KILL constants */ #define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */ /* Default noise level to report when noise measurement is not available. * This may be because we're: * 1) Not associated (4965, no beacon stats being sent to driver) * 2) Scanning (noise measurement does not apply to associated channel) * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) * Use default noise value of -127 ... this is below the range of measurable * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. * Also, -127 works better than 0 when averaging frames with/without * noise info (e.g. averaging might be done in app); measured dBm values are * always negative ... using a negative value as the default keeps all * averages within an s8's (used in some apps) range of negative values. */ #define IL_NOISE_MEAS_NOT_AVAILABLE (-127) /* * RTS threshold here is total size [2347] minus 4 FCS bytes * Per spec: * a value of 0 means RTS on all data/management packets * a value > max MSDU size means no RTS * else RTS for data/management frames where MPDU is larger * than RTS value. */ #define DEFAULT_RTS_THRESHOLD 2347U #define MIN_RTS_THRESHOLD 0U #define MAX_RTS_THRESHOLD 2347U #define MAX_MSDU_SIZE 2304U #define MAX_MPDU_SIZE 2346U #define DEFAULT_BEACON_INTERVAL 100U #define DEFAULT_SHORT_RETRY_LIMIT 7U #define DEFAULT_LONG_RETRY_LIMIT 4U struct il_rx_buf { dma_addr_t page_dma; struct page *page; struct list_head list; }; #define rxb_addr(r) page_address(r->page) /* defined below */ struct il_device_cmd; struct il_cmd_meta { /* only for SYNC commands, iff the reply skb is wanted */ struct il_host_cmd *source; /* * only for ASYNC commands * (which is somewhat stupid -- look at iwl-sta.c for instance * which duplicates a bunch of code because the callback isn't * invoked for SYNC commands, if it were and its result passed * through it would be simpler...) */ void (*callback)(struct il_priv *il, struct il_device_cmd *cmd, struct il_rx_pkt *pkt); /* The CMD_SIZE_HUGE flag bit indicates that the command * structure is stored at the end of the shared queue memory. */ u32 flags; DEFINE_DMA_UNMAP_ADDR(mapping); DEFINE_DMA_UNMAP_LEN(len); }; /* * Generic queue structure * * Contains common data for Rx and Tx queues */ struct il_queue { int n_bd; /* number of BDs in this queue */ int write_ptr; /* 1-st empty entry (idx) host_w*/ int read_ptr; /* last used entry (idx) host_r*/ /* use for monitoring and recovering the stuck queue */ dma_addr_t dma_addr; /* physical addr for BD's */ int n_win; /* safe queue win */ u32 id; int low_mark; /* low watermark, resume queue if free * space more than this */ int high_mark; /* high watermark, stop queue if free * space less than this */ }; /* One for each TFD */ struct il_tx_info { struct sk_buff *skb; struct il_rxon_context *ctx; }; /** * struct il_tx_queue - Tx Queue for DMA * @q: generic Rx/Tx queue descriptor * @bd: base of circular buffer of TFDs * @cmd: array of command/TX buffer pointers * @meta: array of meta data for each command/tx buffer * @dma_addr_cmd: physical address of cmd/tx buffer array * @txb: array of per-TFD driver data * @time_stamp: time (in jiffies) of last read_ptr change * @need_update: indicates need to update read/write idx * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled * * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame * descriptors) and required locking structures. */ #define TFD_TX_CMD_SLOTS 256 #define TFD_CMD_SLOTS 32 struct il_tx_queue { struct il_queue q; void *tfds; struct il_device_cmd **cmd; struct il_cmd_meta *meta; struct il_tx_info *txb; unsigned long time_stamp; u8 need_update; u8 sched_retry; u8 active; u8 swq_id; }; #define IL_NUM_SCAN_RATES (2) struct il4965_channel_tgd_info { u8 type; s8 max_power; }; struct il4965_channel_tgh_info { s64 last_radar_time; }; #define IL4965_MAX_RATE (33) struct il3945_clip_group { /* maximum power level to prevent clipping for each rate, derived by * us from this band's saturation power in EEPROM */ const s8 clip_powers[IL_MAX_RATES]; }; /* current Tx power values to use, one for each rate for each channel. * requested power is limited by: * -- regulatory EEPROM limits for this channel * -- hardware capabilities (clip-powers) * -- spectrum management * -- user preference (e.g. iwconfig) * when requested power is set, base power idx must also be set. */ struct il3945_channel_power_info { struct il3945_tx_power tpc; /* actual radio and DSP gain settings */ s8 power_table_idx; /* actual (compenst'd) idx into gain table */ s8 base_power_idx; /* gain idx for power at factory temp. */ s8 requested_power; /* power (dBm) requested for this chnl/rate */ }; /* current scan Tx power values to use, one for each scan rate for each * channel. */ struct il3945_scan_power_info { struct il3945_tx_power tpc; /* actual radio and DSP gain settings */ s8 power_table_idx; /* actual (compenst'd) idx into gain table */ s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ }; /* * One for each channel, holds all channel setup data * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant * with one another! */ struct il_channel_info { struct il4965_channel_tgd_info tgd; struct il4965_channel_tgh_info tgh; struct il_eeprom_channel eeprom; /* EEPROM regulatory limit */ struct il_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for * HT40 channel */ u8 channel; /* channel number */ u8 flags; /* flags copied from EEPROM */ s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ s8 min_power; /* always 0 */ s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ u8 group_idx; /* 0-4, maps channel to group1/2/3/4/5 */ u8 band_idx; /* 0-4, maps channel to band1/2/3/4/5 */ enum ieee80211_band band; /* HT40 channel info */ s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ u8 ht40_flags; /* flags copied from EEPROM */ u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */ /* Radio/DSP gain settings for each "normal" data Tx rate. * These include, in addition to RF and DSP gain, a few fields for * remembering/modifying gain settings (idxes). */ struct il3945_channel_power_info power_info[IL4965_MAX_RATE]; /* Radio/DSP gain settings for each scan rate, for directed scans. */ struct il3945_scan_power_info scan_pwr_info[IL_NUM_SCAN_RATES]; }; #define IL_TX_FIFO_BK 0 /* shared */ #define IL_TX_FIFO_BE 1 #define IL_TX_FIFO_VI 2 /* shared */ #define IL_TX_FIFO_VO 3 #define IL_TX_FIFO_UNUSED -1 /* Minimum number of queues. MAX_NUM is defined in hw specific files. * Set the minimum to accommodate the 4 standard TX queues, 1 command * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */ #define IL_MIN_NUM_QUEUES 10 #define IL_DEFAULT_CMD_QUEUE_NUM 4 #define IEEE80211_DATA_LEN 2304 #define IEEE80211_4ADDR_LEN 30 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) struct il_frame { union { struct ieee80211_hdr frame; struct il_tx_beacon_cmd beacon; u8 raw[IEEE80211_FRAME_LEN]; u8 cmd[360]; } u; struct list_head list; }; #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) enum { CMD_SYNC = 0, CMD_SIZE_NORMAL = 0, CMD_NO_SKB = 0, CMD_SIZE_HUGE = (1 << 0), CMD_ASYNC = (1 << 1), CMD_WANT_SKB = (1 << 2), CMD_MAPPED = (1 << 3), }; #define DEF_CMD_PAYLOAD_SIZE 320 /** * struct il_device_cmd * * For allocation of the command and tx queues, this establishes the overall * size of the largest command we send to uCode, except for a scan command * (which is relatively huge; space is allocated separately). */ struct il_device_cmd { struct il_cmd_header hdr; /* uCode API */ union { u32 flags; u8 val8; u16 val16; u32 val32; struct il_tx_cmd tx; u8 payload[DEF_CMD_PAYLOAD_SIZE]; } __packed cmd; } __packed; #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct il_device_cmd)) struct il_host_cmd { const void *data; unsigned long reply_page; void (*callback)(struct il_priv *il, struct il_device_cmd *cmd, struct il_rx_pkt *pkt); u32 flags; u16 len; u8 id; }; #define SUP_RATE_11A_MAX_NUM_CHANNELS 8 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12 /** * struct il_rx_queue - Rx queue * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) * @bd_dma: bus address of buffer of receive buffer descriptors (rbd) * @read: Shared idx to newest available Rx buffer * @write: Shared idx to oldest written Rx packet * @free_count: Number of pre-allocated buffers in rx_free * @rx_free: list of free SKBs for use * @rx_used: List of Rx buffers with no SKB * @need_update: flag to indicate we need to update read/write idx * @rb_stts: driver's pointer to receive buffer status * @rb_stts_dma: bus address of receive buffer status * * NOTE: rx_free and rx_used are used as a FIFO for il_rx_bufs */ struct il_rx_queue { __le32 *bd; dma_addr_t bd_dma; struct il_rx_buf pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; struct il_rx_buf *queue[RX_QUEUE_SIZE]; u32 read; u32 write; u32 free_count; u32 write_actual; struct list_head rx_free; struct list_head rx_used; int need_update; struct il_rb_status *rb_stts; dma_addr_t rb_stts_dma; spinlock_t lock; }; #define IL_SUPPORTED_RATES_IE_LEN 8 #define MAX_TID_COUNT 9 #define IL_INVALID_RATE 0xFF #define IL_INVALID_VALUE -1 /** * struct il_ht_agg -- aggregation status while waiting for block-ack * @txq_id: Tx queue used for Tx attempt * @frame_count: # frames attempted by Tx command * @wait_for_ba: Expect block-ack before next Tx reply * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx win * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx win * @bitmap1: High order, one bit for each frame pending ACK in Tx win * @rate_n_flags: Rate at which Tx was attempted * * If REPLY_TX indicates that aggregation was attempted, driver must wait * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info * until block ack arrives. */ struct il_ht_agg { u16 txq_id; u16 frame_count; u16 wait_for_ba; u16 start_idx; u64 bitmap; u32 rate_n_flags; #define IL_AGG_OFF 0 #define IL_AGG_ON 1 #define IL_EMPTYING_HW_QUEUE_ADDBA 2 #define IL_EMPTYING_HW_QUEUE_DELBA 3 u8 state; }; struct il_tid_data { u16 seq_number; /* 4965 only */ u16 tfds_in_queue; struct il_ht_agg agg; }; struct il_hw_key { u32 cipher; int keylen; u8 keyidx; u8 key[32]; }; union il_ht_rate_supp { u16 rates; struct { u8 siso_rate; u8 mimo_rate; }; }; #define CFG_HT_RX_AMPDU_FACTOR_8K (0x0) #define CFG_HT_RX_AMPDU_FACTOR_16K (0x1) #define CFG_HT_RX_AMPDU_FACTOR_32K (0x2) #define CFG_HT_RX_AMPDU_FACTOR_64K (0x3) #define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K #define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K #define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K /* * Maximal MPDU density for TX aggregation * 4 - 2us density * 5 - 4us density * 6 - 8us density * 7 - 16us density */ #define CFG_HT_MPDU_DENSITY_2USEC (0x4) #define CFG_HT_MPDU_DENSITY_4USEC (0x5) #define CFG_HT_MPDU_DENSITY_8USEC (0x6) #define CFG_HT_MPDU_DENSITY_16USEC (0x7) #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC #define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC #define CFG_HT_MPDU_DENSITY_MIN (0x1) struct il_ht_config { bool single_chain_sufficient; enum ieee80211_smps_mode smps; /* current smps mode */ }; /* QoS structures */ struct il_qos_info { int qos_active; struct il_qosparam_cmd def_qos_parm; }; /* * Structure should be accessed with sta_lock held. When station addition * is in progress (IL_STA_UCODE_INPROGRESS) it is possible to access only * the commands (il_addsta_cmd and il_link_quality_cmd) without * sta_lock held. */ struct il_station_entry { struct il_addsta_cmd sta; struct il_tid_data tid[MAX_TID_COUNT]; u8 used, ctxid; struct il_hw_key keyinfo; struct il_link_quality_cmd *lq; }; struct il_station_priv_common { struct il_rxon_context *ctx; u8 sta_id; }; /* * il_station_priv: Driver's ilate station information * * When mac80211 creates a station it reserves some space (hw->sta_data_size) * in the structure for use by driver. This structure is places in that * space. * * The common struct MUST be first because it is shared between * 3945 and 4965! */ struct il_station_priv { struct il_station_priv_common common; struct il_lq_sta lq_sta; atomic_t pending_frames; bool client; bool asleep; }; /** * struct il_vif_priv - driver's ilate per-interface information * * When mac80211 allocates a virtual interface, it can allocate * space for us to put data into. */ struct il_vif_priv { struct il_rxon_context *ctx; u8 ibss_bssid_sta_id; }; /* one for each uCode image (inst/data, boot/init/runtime) */ struct fw_desc { void *v_addr; /* access by driver */ dma_addr_t p_addr; /* access by card's busmaster DMA */ u32 len; /* bytes */ }; /* uCode file layout */ struct il_ucode_header { __le32 ver; /* major/minor/API/serial */ struct { __le32 inst_size; /* bytes of runtime code */ __le32 data_size; /* bytes of runtime data */ __le32 init_size; /* bytes of init code */ __le32 init_data_size; /* bytes of init data */ __le32 boot_size; /* bytes of bootstrap code */ u8 data[0]; /* in same order as sizes */ } v1; }; struct il4965_ibss_seq { u8 mac[ETH_ALEN]; u16 seq_num; u16 frag_num; unsigned long packet_time; struct list_head list; }; struct il_sensitivity_ranges { u16 min_nrg_cck; u16 max_nrg_cck; u16 nrg_th_cck; u16 nrg_th_ofdm; u16 auto_corr_min_ofdm; u16 auto_corr_min_ofdm_mrc; u16 auto_corr_min_ofdm_x1; u16 auto_corr_min_ofdm_mrc_x1; u16 auto_corr_max_ofdm; u16 auto_corr_max_ofdm_mrc; u16 auto_corr_max_ofdm_x1; u16 auto_corr_max_ofdm_mrc_x1; u16 auto_corr_max_cck; u16 auto_corr_max_cck_mrc; u16 auto_corr_min_cck; u16 auto_corr_min_cck_mrc; u16 barker_corr_th_min; u16 barker_corr_th_min_mrc; u16 nrg_th_cca; }; #define KELVIN_TO_CELSIUS(x) ((x)-273) #define CELSIUS_TO_KELVIN(x) ((x)+273) /** * struct il_hw_params * @max_txq_num: Max # Tx queues supported * @dma_chnl_num: Number of Tx DMA/FIFO channels * @scd_bc_tbls_size: size of scheduler byte count tables * @tfd_size: TFD size * @tx/rx_chains_num: Number of TX/RX chains * @valid_tx/rx_ant: usable antennas * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) * @max_rxq_log: Log-base-2 of max_rxq_size * @rx_page_order: Rx buffer page order * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR * @max_stations: * @ht40_channel: is 40MHz width possible in band 2.4 * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ) * @sw_crypto: 0 for hw, 1 for sw * @max_xxx_size: for ucode uses * @ct_kill_threshold: temperature threshold * @beacon_time_tsf_bits: number of valid tsf bits for beacon time * @struct il_sensitivity_ranges: range of sensitivity values */ struct il_hw_params { u8 max_txq_num; u8 dma_chnl_num; u16 scd_bc_tbls_size; u32 tfd_size; u8 tx_chains_num; u8 rx_chains_num; u8 valid_tx_ant; u8 valid_rx_ant; u16 max_rxq_size; u16 max_rxq_log; u32 rx_page_order; u32 rx_wrt_ptr_reg; u8 max_stations; u8 ht40_channel; u8 max_beacon_itrvl; /* in 1024 ms */ u32 max_inst_size; u32 max_data_size; u32 max_bsm_size; u32 ct_kill_threshold; /* value in hw-dependent units */ u16 beacon_time_tsf_bits; const struct il_sensitivity_ranges *sens; }; /****************************************************************************** * * Functions implemented in core module which are forward declared here * for use by iwl-[4-5].c * * NOTE: The implementation of these functions are not hardware specific * which is why they are in the core module files. * * Naming convention -- * il_ <-- Is part of iwlwifi * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) * il4965_bg_ <-- Called from work queue context * il4965_mac_ <-- mac80211 callback * ****************************************************************************/ extern void il4965_update_chain_flags(struct il_priv *il); extern const u8 il_bcast_addr[ETH_ALEN]; extern int il_queue_space(const struct il_queue *q); static inline int il_queue_used(const struct il_queue *q, int i) { return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr && i < q->write_ptr) : !(i < q->read_ptr && i >= q->write_ptr); } static inline u8 il_get_cmd_idx(struct il_queue *q, u32 idx, int is_huge) { /* * This is for init calibration result and scan command which * required buffer > TFD_MAX_PAYLOAD_SIZE, * the big buffer at end of command array */ if (is_huge) return q->n_win; /* must be power of 2 */ /* Otherwise, use normal size buffers */ return idx & (q->n_win - 1); } struct il_dma_ptr { dma_addr_t dma; void *addr; size_t size; }; #define IL_OPERATION_MODE_AUTO 0 #define IL_OPERATION_MODE_HT_ONLY 1 #define IL_OPERATION_MODE_MIXED 2 #define IL_OPERATION_MODE_20MHZ 3 #define IL_TX_CRC_SIZE 4 #define IL_TX_DELIMITER_SIZE 4 #define TX_POWER_IL_ILLEGAL_VOLTAGE -10000 /* Sensitivity and chain noise calibration */ #define INITIALIZATION_VALUE 0xFFFF #define IL4965_CAL_NUM_BEACONS 20 #define IL_CAL_NUM_BEACONS 16 #define MAXIMUM_ALLOWED_PATHLOSS 15 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 #define MAX_FA_OFDM 50 #define MIN_FA_OFDM 5 #define MAX_FA_CCK 50 #define MIN_FA_CCK 5 #define AUTO_CORR_STEP_OFDM 1 #define AUTO_CORR_STEP_CCK 3 #define AUTO_CORR_MAX_TH_CCK 160 #define NRG_DIFF 2 #define NRG_STEP_CCK 2 #define NRG_MARGIN 8 #define MAX_NUMBER_CCK_NO_FA 100 #define AUTO_CORR_CCK_MIN_VAL_DEF (125) #define CHAIN_A 0 #define CHAIN_B 1 #define CHAIN_C 2 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 #define ALL_BAND_FILTER 0xFF00 #define IN_BAND_FILTER 0xFF #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF #define NRG_NUM_PREV_STAT_L 20 #define NUM_RX_CHAINS 3 enum il4965_false_alarm_state { IL_FA_TOO_MANY = 0, IL_FA_TOO_FEW = 1, IL_FA_GOOD_RANGE = 2, }; enum il4965_chain_noise_state { IL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ IL_CHAIN_NOISE_ACCUMULATE, IL_CHAIN_NOISE_CALIBRATED, IL_CHAIN_NOISE_DONE, }; enum il4965_calib_enabled_state { IL_CALIB_DISABLED = 0, /* must be 0 */ IL_CALIB_ENABLED = 1, }; /* * enum il_calib * defines the order in which results of initial calibrations * should be sent to the runtime uCode */ enum il_calib { IL_CALIB_MAX, }; /* Opaque calibration results */ struct il_calib_result { void *buf; size_t buf_len; }; enum ucode_type { UCODE_NONE = 0, UCODE_INIT, UCODE_RT }; /* Sensitivity calib data */ struct il_sensitivity_data { u32 auto_corr_ofdm; u32 auto_corr_ofdm_mrc; u32 auto_corr_ofdm_x1; u32 auto_corr_ofdm_mrc_x1; u32 auto_corr_cck; u32 auto_corr_cck_mrc; u32 last_bad_plcp_cnt_ofdm; u32 last_fa_cnt_ofdm; u32 last_bad_plcp_cnt_cck; u32 last_fa_cnt_cck; u32 nrg_curr_state; u32 nrg_prev_state; u32 nrg_value[10]; u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; u32 nrg_silence_ref; u32 nrg_energy_idx; u32 nrg_silence_idx; u32 nrg_th_cck; s32 nrg_auto_corr_silence_diff; u32 num_in_cck_no_fa; u32 nrg_th_ofdm; u16 barker_corr_th_min; u16 barker_corr_th_min_mrc; u16 nrg_th_cca; }; /* Chain noise (differential Rx gain) calib data */ struct il_chain_noise_data { u32 active_chains; u32 chain_noise_a; u32 chain_noise_b; u32 chain_noise_c; u32 chain_signal_a; u32 chain_signal_b; u32 chain_signal_c; u16 beacon_count; u8 disconn_array[NUM_RX_CHAINS]; u8 delta_gain_code[NUM_RX_CHAINS]; u8 radio_write; u8 state; }; #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ #define IL_TRAFFIC_ENTRIES (256) #define IL_TRAFFIC_ENTRY_SIZE (64) enum { MEASUREMENT_READY = (1 << 0), MEASUREMENT_ACTIVE = (1 << 1), }; /* interrupt stats */ struct isr_stats { u32 hw; u32 sw; u32 err_code; u32 sch; u32 alive; u32 rfkill; u32 ctkill; u32 wakeup; u32 rx; u32 rx_handlers[REPLY_MAX]; u32 tx; u32 unhandled; }; /* management stats */ enum il_mgmt_stats { MANAGEMENT_ASSOC_REQ = 0, MANAGEMENT_ASSOC_RESP, MANAGEMENT_REASSOC_REQ, MANAGEMENT_REASSOC_RESP, MANAGEMENT_PROBE_REQ, MANAGEMENT_PROBE_RESP, MANAGEMENT_BEACON, MANAGEMENT_ATIM, MANAGEMENT_DISASSOC, MANAGEMENT_AUTH, MANAGEMENT_DEAUTH, MANAGEMENT_ACTION, MANAGEMENT_MAX, }; /* control stats */ enum il_ctrl_stats { CONTROL_BACK_REQ = 0, CONTROL_BACK, CONTROL_PSPOLL, CONTROL_RTS, CONTROL_CTS, CONTROL_ACK, CONTROL_CFEND, CONTROL_CFENDACK, CONTROL_MAX, }; struct traffic_stats { #ifdef CONFIG_IWLEGACY_DEBUGFS u32 mgmt[MANAGEMENT_MAX]; u32 ctrl[CONTROL_MAX]; u32 data_cnt; u64 data_bytes; #endif }; /* * host interrupt timeout value * used with setting interrupt coalescing timer * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit * * default interrupt coalescing timer is 64 x 32 = 2048 usecs * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs */ #define IL_HOST_INT_TIMEOUT_MAX (0xFF) #define IL_HOST_INT_TIMEOUT_DEF (0x40) #define IL_HOST_INT_TIMEOUT_MIN (0x0) #define IL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF) #define IL_HOST_INT_CALIB_TIMEOUT_DEF (0x10) #define IL_HOST_INT_CALIB_TIMEOUT_MIN (0x0) #define IL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5) /* TX queue watchdog timeouts in mSecs */ #define IL_DEF_WD_TIMEOUT (2000) #define IL_LONG_WD_TIMEOUT (10000) #define IL_MAX_WD_TIMEOUT (120000) struct il_force_reset { int reset_request_count; int reset_success_count; int reset_reject_count; unsigned long reset_duration; unsigned long last_force_reset_jiffies; }; /* extend beacon time format bit shifting */ /* * for _3945 devices * bits 31:24 - extended * bits 23:0 - interval */ #define IL3945_EXT_BEACON_TIME_POS 24 /* * for _4965 devices * bits 31:22 - extended * bits 21:0 - interval */ #define IL4965_EXT_BEACON_TIME_POS 22 struct il_rxon_context { struct ieee80211_vif *vif; const u8 *ac_to_fifo; const u8 *ac_to_queue; u8 mcast_queue; /* * We could use the vif to indicate active, but we * also need it to be active during disabling when * we already removed the vif for type setting. */ bool always_active, is_active; bool ht_need_multiple_chains; int ctxid; u32 interface_modes, exclusive_interface_modes; u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype; /* * We declare this const so it can only be * changed via explicit cast within the * routines that actually update the physical * hardware. */ const struct il_rxon_cmd active; struct il_rxon_cmd staging; struct il_rxon_time_cmd timing; struct il_qos_info qos_data; u8 bcast_sta_id, ap_sta_id; u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd; u8 qos_cmd; u8 wep_key_cmd; struct il_wep_key wep_keys[WEP_KEYS_MAX]; u8 key_mapping_keys; __le32 station_flags; struct { bool non_gf_sta_present; u8 protection; bool enabled, is_40mhz; u8 extension_chan_offset; } ht; }; struct il_priv { /* ieee device used by generic ieee processing code */ struct ieee80211_hw *hw; struct ieee80211_channel *ieee_channels; struct ieee80211_rate *ieee_rates; struct il_cfg *cfg; /* temporary frame storage list */ struct list_head free_frames; int frames_count; enum ieee80211_band band; int alloc_rxb_page; void (*rx_handlers[REPLY_MAX])(struct il_priv *il, struct il_rx_buf *rxb); struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; /* spectrum measurement report caching */ struct il_spectrum_notification measure_report; u8 measurement_status; /* ucode beacon time */ u32 ucode_beacon_time; int missed_beacon_threshold; /* track IBSS manager (last beacon) status */ u32 ibss_manager; /* force reset */ struct il_force_reset force_reset; /* we allocate array of il_channel_info for NIC's valid channels. * Access via channel # using indirect idx array */ struct il_channel_info *channel_info; /* channel info array */ u8 channel_count; /* # of channels */ /* thermal calibration */ s32 temperature; /* degrees Kelvin */ s32 last_temperature; /* init calibration results */ struct il_calib_result calib_results[IL_CALIB_MAX]; /* Scan related variables */ unsigned long scan_start; unsigned long scan_start_tsf; void *scan_cmd; enum ieee80211_band scan_band; struct cfg80211_scan_request *scan_request; struct ieee80211_vif *scan_vif; u8 scan_tx_ant[IEEE80211_NUM_BANDS]; u8 mgmt_tx_ant; /* spinlock */ spinlock_t lock; /* protect general shared data */ spinlock_t hcmd_lock; /* protect hcmd */ spinlock_t reg_lock; /* protect hw register access */ struct mutex mutex; /* basic pci-network driver stuff */ struct pci_dev *pci_dev; /* pci hardware address support */ void __iomem *hw_base; u32 hw_rev; u32 hw_wa_rev; u8 rev_id; /* command queue number */ u8 cmd_queue; /* max number of station keys */ u8 sta_key_max_num; /* EEPROM MAC addresses */ struct mac_address addresses[1]; /* uCode images, save to reload in case of failure */ int fw_idx; /* firmware we're trying to load */ u32 ucode_ver; /* version of ucode, copy of il_ucode.ver */ struct fw_desc ucode_code; /* runtime inst */ struct fw_desc ucode_data; /* runtime data original */ struct fw_desc ucode_data_backup; /* runtime data save/restore */ struct fw_desc ucode_init; /* initialization inst */ struct fw_desc ucode_init_data; /* initialization data */ struct fw_desc ucode_boot; /* bootstrap inst */ enum ucode_type ucode_type; u8 ucode_write_complete; /* the image write is complete */ char firmware_name[25]; struct il_rxon_context ctx; __le16 switch_channel; /* 1st responses from initialize and runtime uCode images. * _4965's initialize alive response contains some calibration data. */ struct il_init_alive_resp card_alive_init; struct il_alive_resp card_alive; u16 active_rate; u8 start_calib; struct il_sensitivity_data sensitivity_data; struct il_chain_noise_data chain_noise_data; __le16 sensitivity_tbl[HD_TBL_SIZE]; struct il_ht_config current_ht_config; /* Rate scaling data */ u8 retry_rate; wait_queue_head_t wait_command_queue; int activity_timer_active; /* Rx and Tx DMA processing queues */ struct il_rx_queue rxq; struct il_tx_queue *txq; unsigned long txq_ctx_active_msk; struct il_dma_ptr kw; /* keep warm address */ struct il_dma_ptr scd_bc_tbls; u32 scd_base_addr; /* scheduler sram base address */ unsigned long status; /* counts mgmt, ctl, and data packets */ struct traffic_stats tx_stats; struct traffic_stats rx_stats; /* counts interrupts */ struct isr_stats isr_stats; struct il_power_mgr power_data; /* context information */ u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */ /* station table variables */ /* Note: if lock and sta_lock are needed, lock must be acquired first */ spinlock_t sta_lock; int num_stations; struct il_station_entry stations[IL_STATION_COUNT]; unsigned long ucode_key_table; /* queue refcounts */ #define IL_MAX_HW_QUEUES 32 unsigned long queue_stopped[BITS_TO_LONGS(IL_MAX_HW_QUEUES)]; /* for each AC */ atomic_t queue_stop_count[4]; /* Indication if ieee80211_ops->open has been called */ u8 is_open; u8 mac80211_registered; /* eeprom -- this is in the card's little endian byte order */ u8 *eeprom; struct il_eeprom_calib_info *calib_info; enum nl80211_iftype iw_mode; /* Last Rx'd beacon timestamp */ u64 timestamp; union { #if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE) struct { void *shared_virt; dma_addr_t shared_phys; struct delayed_work thermal_periodic; struct delayed_work rfkill_poll; struct il3945_notif_stats stats; #ifdef CONFIG_IWLEGACY_DEBUGFS struct il3945_notif_stats accum_stats; struct il3945_notif_stats delta_stats; struct il3945_notif_stats max_delta; #endif u32 sta_supp_rates; int last_rx_rssi; /* From Rx packet stats */ /* Rx'd packet timing information */ u32 last_beacon_time; u64 last_tsf; /* * each calibration channel group in the * EEPROM has a derived clip setting for * each rate. */ const struct il3945_clip_group clip_groups[5]; } _3945; #endif #if defined(CONFIG_IWL4965) || defined(CONFIG_IWL4965_MODULE) struct { struct il_rx_phy_res last_phy_res; bool last_phy_res_valid; struct completion firmware_loading_complete; /* * chain noise reset and gain commands are the * two extra calibration commands follows the standard * phy calibration commands */ u8 phy_calib_chain_noise_reset_cmd; u8 phy_calib_chain_noise_gain_cmd; struct il_notif_stats stats; #ifdef CONFIG_IWLEGACY_DEBUGFS struct il_notif_stats accum_stats; struct il_notif_stats delta_stats; struct il_notif_stats max_delta; #endif } _4965; #endif }; struct il_hw_params hw_params; u32 inta_mask; struct workqueue_struct *workqueue; struct work_struct restart; struct work_struct scan_completed; struct work_struct rx_replenish; struct work_struct abort_scan; struct il_rxon_context *beacon_ctx; struct sk_buff *beacon_skb; struct work_struct tx_flush; struct tasklet_struct irq_tasklet; struct delayed_work init_alive_start; struct delayed_work alive_start; struct delayed_work scan_check; /* TX Power */ s8 tx_power_user_lmt; s8 tx_power_device_lmt; s8 tx_power_next; #ifdef CONFIG_IWLEGACY_DEBUG /* debugging info */ u32 debug_level; /* per device debugging will override global il_debug_level if set */ #endif /* CONFIG_IWLEGACY_DEBUG */ #ifdef CONFIG_IWLEGACY_DEBUGFS /* debugfs */ u16 tx_traffic_idx; u16 rx_traffic_idx; u8 *tx_traffic; u8 *rx_traffic; struct dentry *debugfs_dir; u32 dbgfs_sram_offset, dbgfs_sram_len; bool disable_ht40; #endif /* CONFIG_IWLEGACY_DEBUGFS */ struct work_struct txpower_work; u32 disable_sens_cal; u32 disable_chain_noise_cal; u32 disable_tx_power_cal; struct work_struct run_time_calib_work; struct timer_list stats_periodic; struct timer_list watchdog; bool hw_ready; struct led_classdev led; unsigned long blink_on, blink_off; bool led_registered; }; /*il_priv */ static inline void il_txq_ctx_activate(struct il_priv *il, int txq_id) { set_bit(txq_id, &il->txq_ctx_active_msk); } static inline void il_txq_ctx_deactivate(struct il_priv *il, int txq_id) { clear_bit(txq_id, &il->txq_ctx_active_msk); } #ifdef CONFIG_IWLEGACY_DEBUG /* * il_get_debug_level: Return active debug level for device * * Using sysfs it is possible to set per device debug level. This debug * level will be used if set, otherwise the global debug level which can be * set via module parameter is used. */ static inline u32 il_get_debug_level(struct il_priv *il) { if (il->debug_level) return il->debug_level; else return il_debug_level; } #else static inline u32 il_get_debug_level(struct il_priv *il) { return il_debug_level; } #endif static inline struct ieee80211_hdr * il_tx_queue_get_hdr(struct il_priv *il, int txq_id, int idx) { if (il->txq[txq_id].txb[idx].skb) return (struct ieee80211_hdr *)il->txq[txq_id]. txb[idx].skb->data; return NULL; } static inline struct il_rxon_context * il_rxon_ctx_from_vif(struct ieee80211_vif *vif) { struct il_vif_priv *vif_priv = (void *)vif->drv_priv; return vif_priv->ctx; } #define for_each_context(il, _ctx) \ for (_ctx = &il->ctx; _ctx == &il->ctx; _ctx++) static inline int il_is_associated(struct il_priv *il) { return (il->ctx.active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; } static inline int il_is_any_associated(struct il_priv *il) { return il_is_associated(il); } static inline int il_is_associated_ctx(struct il_rxon_context *ctx) { return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; } static inline int il_is_channel_valid(const struct il_channel_info *ch_info) { if (ch_info == NULL) return 0; return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; } static inline int il_is_channel_radar(const struct il_channel_info *ch_info) { return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; } static inline u8 il_is_channel_a_band(const struct il_channel_info *ch_info) { return ch_info->band == IEEE80211_BAND_5GHZ; } static inline int il_is_channel_passive(const struct il_channel_info *ch) { return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; } static inline int il_is_channel_ibss(const struct il_channel_info *ch) { return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0; } static inline void __il_free_pages(struct il_priv *il, struct page *page) { __free_pages(page, il->hw_params.rx_page_order); il->alloc_rxb_page--; } static inline void il_free_pages(struct il_priv *il, unsigned long page) { free_pages(page, il->hw_params.rx_page_order); il->alloc_rxb_page--; } #endif /* __il_dev_h__ */