/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #include #include #include "mvm.h" #include "iwl-eeprom-parse.h" #include "fw-api-scan.h" #define IWL_PLCP_QUIET_THRESH 1 #define IWL_ACTIVE_QUIET_TIME 10 static inline __le16 iwl_mvm_scan_rx_chain(struct iwl_mvm *mvm) { u16 rx_chain; u8 rx_ant = mvm->nvm_data->valid_rx_ant; rx_chain = rx_ant << PHY_RX_CHAIN_VALID_POS; rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS; rx_chain |= rx_ant << PHY_RX_CHAIN_FORCE_SEL_POS; rx_chain |= 0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS; return cpu_to_le16(rx_chain); } static inline __le32 iwl_mvm_scan_max_out_time(struct ieee80211_vif *vif) { if (vif->bss_conf.assoc) return cpu_to_le32(200 * 1024); else return 0; } static inline __le32 iwl_mvm_scan_suspend_time(struct ieee80211_vif *vif) { if (vif->bss_conf.assoc) return cpu_to_le32(vif->bss_conf.beacon_int); else return 0; } static inline __le32 iwl_mvm_scan_rxon_flags(struct cfg80211_scan_request *req) { if (req->channels[0]->band == IEEE80211_BAND_2GHZ) return cpu_to_le32(PHY_BAND_24); else return cpu_to_le32(PHY_BAND_5); } static inline __le32 iwl_mvm_scan_rate_n_flags(struct iwl_mvm *mvm, enum ieee80211_band band, bool no_cck) { u32 tx_ant; mvm->scan_last_antenna_idx = iwl_mvm_next_antenna(mvm, mvm->nvm_data->valid_tx_ant, mvm->scan_last_antenna_idx); tx_ant = BIT(mvm->scan_last_antenna_idx) << RATE_MCS_ANT_POS; if (band == IEEE80211_BAND_2GHZ && !no_cck) return cpu_to_le32(IWL_RATE_1M_PLCP | RATE_MCS_CCK_MSK | tx_ant); else return cpu_to_le32(IWL_RATE_6M_PLCP | tx_ant); } /* * We insert the SSIDs in an inverted order, because the FW will * invert it back. The most prioritized SSID, which is first in the * request list, is not copied here, but inserted directly to the probe * request. */ static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd, struct cfg80211_scan_request *req) { int fw_idx, req_idx; fw_idx = 0; for (req_idx = req->n_ssids - 1; req_idx > 0; req_idx--) { cmd->direct_scan[fw_idx].id = WLAN_EID_SSID; cmd->direct_scan[fw_idx].len = req->ssids[req_idx].ssid_len; memcpy(cmd->direct_scan[fw_idx].ssid, req->ssids[req_idx].ssid, req->ssids[req_idx].ssid_len); } } /* * If req->n_ssids > 0, it means we should do an active scan. * In case of active scan w/o directed scan, we receive a zero-length SSID * just to notify that this scan is active and not passive. * In order to notify the FW of the number of SSIDs we wish to scan (including * the zero-length one), we need to set the corresponding bits in chan->type, * one for each SSID, and set the active bit (first). */ static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids) { if (band == IEEE80211_BAND_2GHZ) return 30 + 3 * (n_ssids + 1); return 20 + 2 * (n_ssids + 1); } static u16 iwl_mvm_get_passive_dwell(enum ieee80211_band band) { return band == IEEE80211_BAND_2GHZ ? 100 + 20 : 100 + 10; } static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd, struct cfg80211_scan_request *req) { u16 passive_dwell = iwl_mvm_get_passive_dwell(req->channels[0]->band); u16 active_dwell = iwl_mvm_get_active_dwell(req->channels[0]->band, req->n_ssids); struct iwl_scan_channel *chan = (struct iwl_scan_channel *) (cmd->data + le16_to_cpu(cmd->tx_cmd.len)); int i; __le32 chan_type_value; if (req->n_ssids > 0) chan_type_value = cpu_to_le32(BIT(req->n_ssids + 1) - 1); else chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE; for (i = 0; i < cmd->channel_count; i++) { chan->channel = cpu_to_le16(req->channels[i]->hw_value); if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) chan->type = SCAN_CHANNEL_TYPE_PASSIVE; else chan->type = chan_type_value; chan->active_dwell = cpu_to_le16(active_dwell); chan->passive_dwell = cpu_to_le16(passive_dwell); chan->iteration_count = cpu_to_le16(1); chan++; } } /* * Fill in probe request with the following parameters: * TA is our vif HW address, which mac80211 ensures we have. * Packet is broadcasted, so this is both SA and DA. * The probe request IE is made out of two: first comes the most prioritized * SSID if a directed scan is requested. Second comes whatever extra * information was given to us as the scan request IE. */ static u16 iwl_mvm_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta, int n_ssids, const u8 *ssid, int ssid_len, const u8 *ie, int ie_len, int left) { int len = 0; u8 *pos = NULL; /* Make sure there is enough space for the probe request, * two mandatory IEs and the data */ left -= 24; if (left < 0) return 0; frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); eth_broadcast_addr(frame->da); memcpy(frame->sa, ta, ETH_ALEN); eth_broadcast_addr(frame->bssid); frame->seq_ctrl = 0; len += 24; /* for passive scans, no need to fill anything */ if (n_ssids == 0) return (u16)len; /* points to the payload of the request */ pos = &frame->u.probe_req.variable[0]; /* fill in our SSID IE */ left -= ssid_len + 2; if (left < 0) return 0; *pos++ = WLAN_EID_SSID; *pos++ = ssid_len; if (ssid && ssid_len) { /* ssid_len may be == 0 even if ssid is valid */ memcpy(pos, ssid, ssid_len); pos += ssid_len; } len += ssid_len + 2; if (WARN_ON(left < ie_len)) return len; if (ie && ie_len) { memcpy(pos, ie, ie_len); len += ie_len; } return (u16)len; } int iwl_mvm_scan_request(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct cfg80211_scan_request *req) { struct iwl_host_cmd hcmd = { .id = SCAN_REQUEST_CMD, .len = { 0, }, .data = { mvm->scan_cmd, }, .flags = CMD_SYNC, .dataflags = { IWL_HCMD_DFL_NOCOPY, }, }; struct iwl_scan_cmd *cmd = mvm->scan_cmd; int ret; u32 status; int ssid_len = 0; u8 *ssid = NULL; lockdep_assert_held(&mvm->mutex); BUG_ON(mvm->scan_cmd == NULL); IWL_DEBUG_SCAN(mvm, "Handling mac80211 scan request\n"); mvm->scan_status = IWL_MVM_SCAN_OS; memset(cmd, 0, sizeof(struct iwl_scan_cmd) + mvm->fw->ucode_capa.max_probe_length + (MAX_NUM_SCAN_CHANNELS * sizeof(struct iwl_scan_channel))); cmd->channel_count = (u8)req->n_channels; cmd->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME); cmd->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH); cmd->rxchain_sel_flags = iwl_mvm_scan_rx_chain(mvm); cmd->max_out_time = iwl_mvm_scan_max_out_time(vif); cmd->suspend_time = iwl_mvm_scan_suspend_time(vif); cmd->rxon_flags = iwl_mvm_scan_rxon_flags(req); cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP | MAC_FILTER_IN_BEACON); cmd->type = SCAN_TYPE_FORCED; cmd->repeats = cpu_to_le32(1); /* * If the user asked for passive scan, don't change to active scan if * you see any activity on the channel - remain passive. */ if (req->n_ssids > 0) { cmd->passive2active = cpu_to_le16(1); ssid = req->ssids[0].ssid; ssid_len = req->ssids[0].ssid_len; } else { cmd->passive2active = 0; } iwl_mvm_scan_fill_ssids(cmd, req); cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL); cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id; cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); cmd->tx_cmd.rate_n_flags = iwl_mvm_scan_rate_n_flags(mvm, req->channels[0]->band, req->no_cck); cmd->tx_cmd.len = cpu_to_le16(iwl_mvm_fill_probe_req( (struct ieee80211_mgmt *)cmd->data, vif->addr, req->n_ssids, ssid, ssid_len, req->ie, req->ie_len, mvm->fw->ucode_capa.max_probe_length)); iwl_mvm_scan_fill_channels(cmd, req); cmd->len = cpu_to_le16(sizeof(struct iwl_scan_cmd) + le16_to_cpu(cmd->tx_cmd.len) + (cmd->channel_count * sizeof(struct iwl_scan_channel))); hcmd.len[0] = le16_to_cpu(cmd->len); status = SCAN_RESPONSE_OK; ret = iwl_mvm_send_cmd_status(mvm, &hcmd, &status); if (!ret && status == SCAN_RESPONSE_OK) { IWL_DEBUG_SCAN(mvm, "Scan request was sent successfully\n"); } else { /* * If the scan failed, it usually means that the FW was unable * to allocate the time events. Warn on it, but maybe we * should try to send the command again with different params. */ IWL_ERR(mvm, "Scan failed! status 0x%x ret %d\n", status, ret); mvm->scan_status = IWL_MVM_SCAN_NONE; ret = -EIO; } return ret; } int iwl_mvm_rx_scan_response(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd) { struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_cmd_response *resp = (void *)pkt->data; IWL_DEBUG_SCAN(mvm, "Scan response received. status 0x%x\n", le32_to_cpu(resp->status)); return 0; } int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd) { struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_scan_complete_notif *notif = (void *)pkt->data; IWL_DEBUG_SCAN(mvm, "Scan complete: status=0x%x scanned channels=%d\n", notif->status, notif->scanned_channels); mvm->scan_status = IWL_MVM_SCAN_NONE; ieee80211_scan_completed(mvm->hw, notif->status != SCAN_COMP_STATUS_OK); return 0; } static bool iwl_mvm_scan_abort_notif(struct iwl_notif_wait_data *notif_wait, struct iwl_rx_packet *pkt, void *data) { struct iwl_mvm *mvm = container_of(notif_wait, struct iwl_mvm, notif_wait); struct iwl_scan_complete_notif *notif; u32 *resp; switch (pkt->hdr.cmd) { case SCAN_ABORT_CMD: resp = (void *)pkt->data; if (*resp == CAN_ABORT_STATUS) { IWL_DEBUG_SCAN(mvm, "Scan can be aborted, wait until completion\n"); return false; } IWL_DEBUG_SCAN(mvm, "Scan cannot be aborted, exit now: %d\n", *resp); return true; case SCAN_COMPLETE_NOTIFICATION: notif = (void *)pkt->data; IWL_DEBUG_SCAN(mvm, "Scan aborted: status 0x%x\n", notif->status); return true; default: WARN_ON(1); return false; }; } void iwl_mvm_cancel_scan(struct iwl_mvm *mvm) { struct iwl_notification_wait wait_scan_abort; static const u8 scan_abort_notif[] = { SCAN_ABORT_CMD, SCAN_COMPLETE_NOTIFICATION }; int ret; iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort, scan_abort_notif, ARRAY_SIZE(scan_abort_notif), iwl_mvm_scan_abort_notif, NULL); ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, CMD_SYNC, 0, NULL); if (ret) { IWL_ERR(mvm, "Couldn't send SCAN_ABORT_CMD: %d\n", ret); goto out_remove_notif; } ret = iwl_wait_notification(&mvm->notif_wait, &wait_scan_abort, 1 * HZ); if (ret) IWL_ERR(mvm, "%s - failed on timeout\n", __func__); return; out_remove_notif: iwl_remove_notification(&mvm->notif_wait, &wait_scan_abort); }