/****************************************************************************** * * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * *****************************************************************************/ #include #include #include #include "iwl-prph.h" #include "iwl-io.h" #include "internal.h" #include "iwl-op-mode.h" /****************************************************************************** * * RX path functions * ******************************************************************************/ /* * Rx theory of operation * * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), * each of which point to Receive Buffers to be filled by the NIC. These get * used not only for Rx frames, but for any command response or notification * from the NIC. The driver and NIC manage the Rx buffers by means * of indexes into the circular buffer. * * Rx Queue Indexes * The host/firmware share two index registers for managing the Rx buffers. * * The READ index maps to the first position that the firmware may be writing * to -- the driver can read up to (but not including) this position and get * good data. * The READ index is managed by the firmware once the card is enabled. * * The WRITE index maps to the last position the driver has read from -- the * position preceding WRITE is the last slot the firmware can place a packet. * * The queue is empty (no good data) if WRITE = READ - 1, and is full if * WRITE = READ. * * During initialization, the host sets up the READ queue position to the first * INDEX position, and WRITE to the last (READ - 1 wrapped) * * When the firmware places a packet in a buffer, it will advance the READ index * and fire the RX interrupt. The driver can then query the READ index and * process as many packets as possible, moving the WRITE index forward as it * resets the Rx queue buffers with new memory. * * The management in the driver is as follows: * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled * to replenish the iwl->rxq->rx_free. * + In iwl_pcie_rx_replenish (scheduled) if 'processed' != 'read' then the * iwl->rxq is replenished and the READ INDEX is updated (updating the * 'processed' and 'read' driver indexes as well) * + A received packet is processed and handed to the kernel network stack, * detached from the iwl->rxq. The driver 'processed' index is updated. * + The Host/Firmware iwl->rxq is replenished at irq thread time from the * rx_free list. If there are no allocated buffers in iwl->rxq->rx_free, * the READ INDEX is not incremented and iwl->status(RX_STALLED) is set. * If there were enough free buffers and RX_STALLED is set it is cleared. * * * Driver sequence: * * iwl_rxq_alloc() Allocates rx_free * iwl_pcie_rx_replenish() Replenishes rx_free list from rx_used, and calls * iwl_pcie_rxq_restock * iwl_pcie_rxq_restock() Moves available buffers from rx_free into Rx * queue, updates firmware pointers, and updates * the WRITE index. If insufficient rx_free buffers * are available, schedules iwl_pcie_rx_replenish * * -- enable interrupts -- * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the * READ INDEX, detaching the SKB from the pool. * Moves the packet buffer from queue to rx_used. * Calls iwl_pcie_rxq_restock to refill any empty * slots. * ... * */ /* * iwl_rxq_space - Return number of free slots available in queue. */ static int iwl_rxq_space(const struct iwl_rxq *rxq) { /* Make sure RX_QUEUE_SIZE is a power of 2 */ BUILD_BUG_ON(RX_QUEUE_SIZE & (RX_QUEUE_SIZE - 1)); /* * There can be up to (RX_QUEUE_SIZE - 1) free slots, to avoid ambiguity * between empty and completely full queues. * The following is equivalent to modulo by RX_QUEUE_SIZE and is well * defined for negative dividends. */ return (rxq->read - rxq->write - 1) & (RX_QUEUE_SIZE - 1); } /* * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr */ static inline __le32 iwl_pcie_dma_addr2rbd_ptr(dma_addr_t dma_addr) { return cpu_to_le32((u32)(dma_addr >> 8)); } /* * iwl_pcie_rx_stop - stops the Rx DMA */ int iwl_pcie_rx_stop(struct iwl_trans *trans) { iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); return iwl_poll_direct_bit(trans, FH_MEM_RSSR_RX_STATUS_REG, FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); } /* * iwl_pcie_rxq_inc_wr_ptr - Update the write pointer for the RX queue */ static void iwl_pcie_rxq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_rxq *rxq) { unsigned long flags; u32 reg; spin_lock_irqsave(&rxq->lock, flags); if (rxq->need_update == 0) goto exit_unlock; if (trans->cfg->base_params->shadow_reg_enable) { /* shadow register enabled */ /* Device expects a multiple of 8 */ rxq->write_actual = (rxq->write & ~0x7); iwl_write32(trans, FH_RSCSR_CHNL0_WPTR, rxq->write_actual); } else { /* If power-saving is in use, make sure device is awake */ if (test_bit(STATUS_TPOWER_PMI, &trans->status)) { reg = iwl_read32(trans, CSR_UCODE_DRV_GP1); if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { IWL_DEBUG_INFO(trans, "Rx queue requesting wakeup," " GP1 = 0x%x\n", reg); iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); goto exit_unlock; } rxq->write_actual = (rxq->write & ~0x7); iwl_write_direct32(trans, FH_RSCSR_CHNL0_WPTR, rxq->write_actual); /* Else device is assumed to be awake */ } else { /* Device expects a multiple of 8 */ rxq->write_actual = (rxq->write & ~0x7); iwl_write_direct32(trans, FH_RSCSR_CHNL0_WPTR, rxq->write_actual); } } rxq->need_update = 0; exit_unlock: spin_unlock_irqrestore(&rxq->lock, flags); } /* * iwl_pcie_rxq_restock - refill RX queue from pre-allocated pool * * If there are slots in the RX queue that need to be restocked, * and we have free pre-allocated buffers, fill the ranks as much * as we can, pulling from rx_free. * * This moves the 'write' index forward to catch up with 'processed', and * also updates the memory address in the firmware to reference the new * target buffer. */ static void iwl_pcie_rxq_restock(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; struct iwl_rx_mem_buffer *rxb; unsigned long flags; /* * If the device isn't enabled - not need to try to add buffers... * This can happen when we stop the device and still have an interrupt * pending. We stop the APM before we sync the interrupts because we * have to (see comment there). On the other hand, since the APM is * stopped, we cannot access the HW (in particular not prph). * So don't try to restock if the APM has been already stopped. */ if (!test_bit(STATUS_DEVICE_ENABLED, &trans->status)) return; spin_lock_irqsave(&rxq->lock, flags); while ((iwl_rxq_space(rxq) > 0) && (rxq->free_count)) { /* The overwritten rxb must be a used one */ rxb = rxq->queue[rxq->write]; BUG_ON(rxb && rxb->page); /* Get next free Rx buffer, remove from free list */ rxb = list_first_entry(&rxq->rx_free, struct iwl_rx_mem_buffer, list); list_del(&rxb->list); /* Point to Rx buffer via next RBD in circular buffer */ rxq->bd[rxq->write] = iwl_pcie_dma_addr2rbd_ptr(rxb->page_dma); rxq->queue[rxq->write] = rxb; rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; rxq->free_count--; } spin_unlock_irqrestore(&rxq->lock, flags); /* If the pre-allocated buffer pool is dropping low, schedule to * refill it */ if (rxq->free_count <= RX_LOW_WATERMARK) schedule_work(&trans_pcie->rx_replenish); /* If we've added more space for the firmware to place data, tell it. * Increment device's write pointer in multiples of 8. */ if (rxq->write_actual != (rxq->write & ~0x7)) { spin_lock_irqsave(&rxq->lock, flags); rxq->need_update = 1; spin_unlock_irqrestore(&rxq->lock, flags); iwl_pcie_rxq_inc_wr_ptr(trans, rxq); } } /* * iwl_pcie_rxq_alloc_rbs - allocate a page for each used RBD * * A used RBD is an Rx buffer that has been given to the stack. To use it again * a page must be allocated and the RBD must point to the page. This function * doesn't change the HW pointer but handles the list of pages that is used by * iwl_pcie_rxq_restock. The latter function will update the HW to use the newly * allocated buffers. */ static void iwl_pcie_rxq_alloc_rbs(struct iwl_trans *trans, gfp_t priority) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; struct iwl_rx_mem_buffer *rxb; struct page *page; unsigned long flags; gfp_t gfp_mask = priority; while (1) { spin_lock_irqsave(&rxq->lock, flags); if (list_empty(&rxq->rx_used)) { spin_unlock_irqrestore(&rxq->lock, flags); return; } spin_unlock_irqrestore(&rxq->lock, flags); if (rxq->free_count > RX_LOW_WATERMARK) gfp_mask |= __GFP_NOWARN; if (trans_pcie->rx_page_order > 0) gfp_mask |= __GFP_COMP; /* Alloc a new receive buffer */ page = alloc_pages(gfp_mask, trans_pcie->rx_page_order); if (!page) { if (net_ratelimit()) IWL_DEBUG_INFO(trans, "alloc_pages failed, " "order: %d\n", trans_pcie->rx_page_order); if ((rxq->free_count <= RX_LOW_WATERMARK) && net_ratelimit()) IWL_CRIT(trans, "Failed to alloc_pages with %s." "Only %u free buffers remaining.\n", priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", rxq->free_count); /* We don't reschedule replenish work here -- we will * call the restock method and if it still needs * more buffers it will schedule replenish */ return; } spin_lock_irqsave(&rxq->lock, flags); if (list_empty(&rxq->rx_used)) { spin_unlock_irqrestore(&rxq->lock, flags); __free_pages(page, trans_pcie->rx_page_order); return; } rxb = list_first_entry(&rxq->rx_used, struct iwl_rx_mem_buffer, list); list_del(&rxb->list); spin_unlock_irqrestore(&rxq->lock, flags); BUG_ON(rxb->page); rxb->page = page; /* Get physical address of the RB */ rxb->page_dma = dma_map_page(trans->dev, page, 0, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); if (dma_mapping_error(trans->dev, rxb->page_dma)) { rxb->page = NULL; spin_lock_irqsave(&rxq->lock, flags); list_add(&rxb->list, &rxq->rx_used); spin_unlock_irqrestore(&rxq->lock, flags); __free_pages(page, trans_pcie->rx_page_order); return; } /* dma address must be no more than 36 bits */ BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); /* and also 256 byte aligned! */ BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &rxq->rx_free); rxq->free_count++; spin_unlock_irqrestore(&rxq->lock, flags); } } static void iwl_pcie_rxq_free_rbs(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; int i; lockdep_assert_held(&rxq->lock); for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { if (!rxq->pool[i].page) continue; dma_unmap_page(trans->dev, rxq->pool[i].page_dma, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); __free_pages(rxq->pool[i].page, trans_pcie->rx_page_order); rxq->pool[i].page = NULL; } } /* * iwl_pcie_rx_replenish - Move all used buffers from rx_used to rx_free * * When moving to rx_free an page is allocated for the slot. * * Also restock the Rx queue via iwl_pcie_rxq_restock. * This is called as a scheduled work item (except for during initialization) */ static void iwl_pcie_rx_replenish(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); unsigned long flags; iwl_pcie_rxq_alloc_rbs(trans, GFP_KERNEL); spin_lock_irqsave(&trans_pcie->irq_lock, flags); iwl_pcie_rxq_restock(trans); spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); } static void iwl_pcie_rx_replenish_now(struct iwl_trans *trans) { iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC); iwl_pcie_rxq_restock(trans); } static void iwl_pcie_rx_replenish_work(struct work_struct *data) { struct iwl_trans_pcie *trans_pcie = container_of(data, struct iwl_trans_pcie, rx_replenish); iwl_pcie_rx_replenish(trans_pcie->trans); } static int iwl_pcie_rx_alloc(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; struct device *dev = trans->dev; memset(&trans_pcie->rxq, 0, sizeof(trans_pcie->rxq)); spin_lock_init(&rxq->lock); if (WARN_ON(rxq->bd || rxq->rb_stts)) return -EINVAL; /* Allocate the circular buffer of Read Buffer Descriptors (RBDs) */ rxq->bd = dma_zalloc_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE, &rxq->bd_dma, GFP_KERNEL); if (!rxq->bd) goto err_bd; /*Allocate the driver's pointer to receive buffer status */ rxq->rb_stts = dma_zalloc_coherent(dev, sizeof(*rxq->rb_stts), &rxq->rb_stts_dma, GFP_KERNEL); if (!rxq->rb_stts) goto err_rb_stts; return 0; err_rb_stts: dma_free_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE, rxq->bd, rxq->bd_dma); rxq->bd_dma = 0; rxq->bd = NULL; err_bd: return -ENOMEM; } static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); u32 rb_size; const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ if (trans_pcie->rx_buf_size_8k) rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; else rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; /* Stop Rx DMA */ iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); /* reset and flush pointers */ iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_RBDCB_WPTR, 0); iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ, 0); iwl_write_direct32(trans, FH_RSCSR_CHNL0_RDPTR, 0); /* Reset driver's Rx queue write index */ iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); /* Tell device where to find RBD circular buffer in DRAM */ iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_BASE_REG, (u32)(rxq->bd_dma >> 8)); /* Tell device where in DRAM to update its Rx status */ iwl_write_direct32(trans, FH_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4); /* Enable Rx DMA * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in * the credit mechanism in 5000 HW RX FIFO * Direct rx interrupts to hosts * Rx buffer size 4 or 8k * RB timeout 0x10 * 256 RBDs */ iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | rb_size| (RX_RB_TIMEOUT << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); /* Set interrupt coalescing timer to default (2048 usecs) */ iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); /* W/A for interrupt coalescing bug in 7260 and 3160 */ if (trans->cfg->host_interrupt_operation_mode) iwl_set_bit(trans, CSR_INT_COALESCING, IWL_HOST_INT_OPER_MODE); } static void iwl_pcie_rx_init_rxb_lists(struct iwl_rxq *rxq) { int i; lockdep_assert_held(&rxq->lock); INIT_LIST_HEAD(&rxq->rx_free); INIT_LIST_HEAD(&rxq->rx_used); rxq->free_count = 0; for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) list_add(&rxq->pool[i].list, &rxq->rx_used); } int iwl_pcie_rx_init(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; int i, err; unsigned long flags; if (!rxq->bd) { err = iwl_pcie_rx_alloc(trans); if (err) return err; } spin_lock_irqsave(&rxq->lock, flags); INIT_WORK(&trans_pcie->rx_replenish, iwl_pcie_rx_replenish_work); /* free all first - we might be reconfigured for a different size */ iwl_pcie_rxq_free_rbs(trans); iwl_pcie_rx_init_rxb_lists(rxq); for (i = 0; i < RX_QUEUE_SIZE; i++) rxq->queue[i] = NULL; /* Set us so that we have processed and used all buffers, but have * not restocked the Rx queue with fresh buffers */ rxq->read = rxq->write = 0; rxq->write_actual = 0; memset(rxq->rb_stts, 0, sizeof(*rxq->rb_stts)); spin_unlock_irqrestore(&rxq->lock, flags); iwl_pcie_rx_replenish(trans); iwl_pcie_rx_hw_init(trans, rxq); spin_lock_irqsave(&trans_pcie->irq_lock, flags); rxq->need_update = 1; iwl_pcie_rxq_inc_wr_ptr(trans, rxq); spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); return 0; } void iwl_pcie_rx_free(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; unsigned long flags; /*if rxq->bd is NULL, it means that nothing has been allocated, * exit now */ if (!rxq->bd) { IWL_DEBUG_INFO(trans, "Free NULL rx context\n"); return; } cancel_work_sync(&trans_pcie->rx_replenish); spin_lock_irqsave(&rxq->lock, flags); iwl_pcie_rxq_free_rbs(trans); spin_unlock_irqrestore(&rxq->lock, flags); dma_free_coherent(trans->dev, sizeof(__le32) * RX_QUEUE_SIZE, rxq->bd, rxq->bd_dma); rxq->bd_dma = 0; rxq->bd = NULL; if (rxq->rb_stts) dma_free_coherent(trans->dev, sizeof(struct iwl_rb_status), rxq->rb_stts, rxq->rb_stts_dma); else IWL_DEBUG_INFO(trans, "Free rxq->rb_stts which is NULL\n"); rxq->rb_stts_dma = 0; rxq->rb_stts = NULL; } static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans, struct iwl_rx_mem_buffer *rxb) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; struct iwl_txq *txq = &trans_pcie->txq[trans_pcie->cmd_queue]; unsigned long flags; bool page_stolen = false; int max_len = PAGE_SIZE << trans_pcie->rx_page_order; u32 offset = 0; if (WARN_ON(!rxb)) return; dma_unmap_page(trans->dev, rxb->page_dma, max_len, DMA_FROM_DEVICE); while (offset + sizeof(u32) + sizeof(struct iwl_cmd_header) < max_len) { struct iwl_rx_packet *pkt; struct iwl_device_cmd *cmd; u16 sequence; bool reclaim; int index, cmd_index, err, len; struct iwl_rx_cmd_buffer rxcb = { ._offset = offset, ._rx_page_order = trans_pcie->rx_page_order, ._page = rxb->page, ._page_stolen = false, .truesize = max_len, }; pkt = rxb_addr(&rxcb); if (pkt->len_n_flags == cpu_to_le32(FH_RSCSR_FRAME_INVALID)) break; IWL_DEBUG_RX(trans, "cmd at offset %d: %s (0x%.2x)\n", rxcb._offset, get_cmd_string(trans_pcie, pkt->hdr.cmd), pkt->hdr.cmd); len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; len += sizeof(u32); /* account for status word */ trace_iwlwifi_dev_rx(trans->dev, trans, pkt, len); trace_iwlwifi_dev_rx_data(trans->dev, trans, pkt, len); /* Reclaim a command buffer only if this packet is a response * to a (driver-originated) command. * If the packet (e.g. Rx frame) originated from uCode, * there is no command buffer to reclaim. * Ucode should set SEQ_RX_FRAME bit if ucode-originated, * but apparently a few don't get set; catch them here. */ reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME); if (reclaim) { int i; for (i = 0; i < trans_pcie->n_no_reclaim_cmds; i++) { if (trans_pcie->no_reclaim_cmds[i] == pkt->hdr.cmd) { reclaim = false; break; } } } sequence = le16_to_cpu(pkt->hdr.sequence); index = SEQ_TO_INDEX(sequence); cmd_index = get_cmd_index(&txq->q, index); if (reclaim) cmd = txq->entries[cmd_index].cmd; else cmd = NULL; err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd); if (reclaim) { kfree(txq->entries[cmd_index].free_buf); txq->entries[cmd_index].free_buf = NULL; } /* * After here, we should always check rxcb._page_stolen, * if it is true then one of the handlers took the page. */ if (reclaim) { /* Invoke any callbacks, transfer the buffer to caller, * and fire off the (possibly) blocking * iwl_trans_send_cmd() * as we reclaim the driver command queue */ if (!rxcb._page_stolen) iwl_pcie_hcmd_complete(trans, &rxcb, err); else IWL_WARN(trans, "Claim null rxb?\n"); } page_stolen |= rxcb._page_stolen; offset += ALIGN(len, FH_RSCSR_FRAME_ALIGN); } /* page was stolen from us -- free our reference */ if (page_stolen) { __free_pages(rxb->page, trans_pcie->rx_page_order); rxb->page = NULL; } /* Reuse the page if possible. For notification packets and * SKBs that fail to Rx correctly, add them back into the * rx_free list for reuse later. */ spin_lock_irqsave(&rxq->lock, flags); if (rxb->page != NULL) { rxb->page_dma = dma_map_page(trans->dev, rxb->page, 0, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); if (dma_mapping_error(trans->dev, rxb->page_dma)) { /* * free the page(s) as well to not break * the invariant that the items on the used * list have no page(s) */ __free_pages(rxb->page, trans_pcie->rx_page_order); rxb->page = NULL; list_add_tail(&rxb->list, &rxq->rx_used); } else { list_add_tail(&rxb->list, &rxq->rx_free); rxq->free_count++; } } else list_add_tail(&rxb->list, &rxq->rx_used); spin_unlock_irqrestore(&rxq->lock, flags); } /* * iwl_pcie_rx_handle - Main entry function for receiving responses from fw */ static void iwl_pcie_rx_handle(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; u32 r, i; u8 fill_rx = 0; u32 count = 8; int total_empty; /* uCode's read index (stored in shared DRAM) indicates the last Rx * buffer that the driver may process (last buffer filled by ucode). */ r = le16_to_cpu(ACCESS_ONCE(rxq->rb_stts->closed_rb_num)) & 0x0FFF; i = rxq->read; /* Rx interrupt, but nothing sent from uCode */ if (i == r) IWL_DEBUG_RX(trans, "HW = SW = %d\n", r); /* calculate total frames need to be restock after handling RX */ total_empty = r - rxq->write_actual; if (total_empty < 0) total_empty += RX_QUEUE_SIZE; if (total_empty > (RX_QUEUE_SIZE / 2)) fill_rx = 1; while (i != r) { struct iwl_rx_mem_buffer *rxb; rxb = rxq->queue[i]; rxq->queue[i] = NULL; IWL_DEBUG_RX(trans, "rxbuf: HW = %d, SW = %d (%p)\n", r, i, rxb); iwl_pcie_rx_handle_rb(trans, rxb); i = (i + 1) & RX_QUEUE_MASK; /* If there are a lot of unused frames, * restock the Rx queue so ucode wont assert. */ if (fill_rx) { count++; if (count >= 8) { rxq->read = i; iwl_pcie_rx_replenish_now(trans); count = 0; } } } /* Backtrack one entry */ rxq->read = i; if (fill_rx) iwl_pcie_rx_replenish_now(trans); else iwl_pcie_rxq_restock(trans); } /* * iwl_pcie_irq_handle_error - called for HW or SW error interrupt from card */ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); /* W/A for WiFi/WiMAX coex and WiMAX own the RF */ if (trans->cfg->internal_wimax_coex && (!(iwl_read_prph(trans, APMG_CLK_CTRL_REG) & APMS_CLK_VAL_MRB_FUNC_MODE) || (iwl_read_prph(trans, APMG_PS_CTRL_REG) & APMG_PS_CTRL_VAL_RESET_REQ))) { clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status); iwl_op_mode_wimax_active(trans->op_mode); wake_up(&trans_pcie->wait_command_queue); return; } iwl_pcie_dump_csr(trans); iwl_dump_fh(trans, NULL); local_bh_disable(); /* The STATUS_FW_ERROR bit is set in this function. This must happen * before we wake up the command caller, to ensure a proper cleanup. */ iwl_trans_fw_error(trans); local_bh_enable(); clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status); wake_up(&trans_pcie->wait_command_queue); } irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) { struct iwl_trans *trans = dev_id; struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct isr_statistics *isr_stats = &trans_pcie->isr_stats; u32 inta = 0; u32 handled = 0; unsigned long flags; u32 i; lock_map_acquire(&trans->sync_cmd_lockdep_map); spin_lock_irqsave(&trans_pcie->irq_lock, flags); /* Ack/clear/reset pending uCode interrupts. * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, */ /* There is a hardware bug in the interrupt mask function that some * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if * they are disabled in the CSR_INT_MASK register. Furthermore the * ICT interrupt handling mechanism has another bug that might cause * these unmasked interrupts fail to be detected. We workaround the * hardware bugs here by ACKing all the possible interrupts so that * interrupt coalescing can still be achieved. */ iwl_write32(trans, CSR_INT, trans_pcie->inta | ~trans_pcie->inta_mask); inta = trans_pcie->inta; if (iwl_have_debug_level(IWL_DL_ISR)) IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n", inta, iwl_read32(trans, CSR_INT_MASK)); /* saved interrupt in inta variable now we can reset trans_pcie->inta */ trans_pcie->inta = 0; spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); /* Now service all interrupt bits discovered above. */ if (inta & CSR_INT_BIT_HW_ERR) { IWL_ERR(trans, "Hardware error detected. Restarting.\n"); /* Tell the device to stop sending interrupts */ iwl_disable_interrupts(trans); isr_stats->hw++; iwl_pcie_irq_handle_error(trans); handled |= CSR_INT_BIT_HW_ERR; goto out; } if (iwl_have_debug_level(IWL_DL_ISR)) { /* NIC fires this, but we don't use it, redundant with WAKEUP */ if (inta & CSR_INT_BIT_SCD) { IWL_DEBUG_ISR(trans, "Scheduler finished to transmit the frame/frames.\n"); isr_stats->sch++; } /* Alive notification via Rx interrupt will do the real work */ if (inta & CSR_INT_BIT_ALIVE) { IWL_DEBUG_ISR(trans, "Alive interrupt\n"); isr_stats->alive++; } } /* Safely ignore these bits for debug checks below */ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); /* HW RF KILL switch toggled */ if (inta & CSR_INT_BIT_RF_KILL) { bool hw_rfkill; hw_rfkill = iwl_is_rfkill_set(trans); IWL_WARN(trans, "RF_KILL bit toggled to %s.\n", hw_rfkill ? "disable radio" : "enable radio"); isr_stats->rfkill++; iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill) { set_bit(STATUS_RFKILL, &trans->status); if (test_and_clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status)) IWL_DEBUG_RF_KILL(trans, "Rfkill while SYNC HCMD in flight\n"); wake_up(&trans_pcie->wait_command_queue); } else { clear_bit(STATUS_RFKILL, &trans->status); } handled |= CSR_INT_BIT_RF_KILL; } /* Chip got too hot and stopped itself */ if (inta & CSR_INT_BIT_CT_KILL) { IWL_ERR(trans, "Microcode CT kill error detected.\n"); isr_stats->ctkill++; handled |= CSR_INT_BIT_CT_KILL; } /* Error detected by uCode */ if (inta & CSR_INT_BIT_SW_ERR) { IWL_ERR(trans, "Microcode SW error detected. " " Restarting 0x%X.\n", inta); isr_stats->sw++; iwl_pcie_irq_handle_error(trans); handled |= CSR_INT_BIT_SW_ERR; } /* uCode wakes up after power-down sleep */ if (inta & CSR_INT_BIT_WAKEUP) { IWL_DEBUG_ISR(trans, "Wakeup interrupt\n"); iwl_pcie_rxq_inc_wr_ptr(trans, &trans_pcie->rxq); for (i = 0; i < trans->cfg->base_params->num_of_queues; i++) iwl_pcie_txq_inc_wr_ptr(trans, &trans_pcie->txq[i]); isr_stats->wakeup++; handled |= CSR_INT_BIT_WAKEUP; } /* All uCode command responses, including Tx command responses, * Rx "responses" (frame-received notification), and other * notifications from uCode come through here*/ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX | CSR_INT_BIT_RX_PERIODIC)) { IWL_DEBUG_ISR(trans, "Rx interrupt\n"); if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); iwl_write32(trans, CSR_FH_INT_STATUS, CSR_FH_INT_RX_MASK); } if (inta & CSR_INT_BIT_RX_PERIODIC) { handled |= CSR_INT_BIT_RX_PERIODIC; iwl_write32(trans, CSR_INT, CSR_INT_BIT_RX_PERIODIC); } /* Sending RX interrupt require many steps to be done in the * the device: * 1- write interrupt to current index in ICT table. * 2- dma RX frame. * 3- update RX shared data to indicate last write index. * 4- send interrupt. * This could lead to RX race, driver could receive RX interrupt * but the shared data changes does not reflect this; * periodic interrupt will detect any dangling Rx activity. */ /* Disable periodic interrupt; we use it as just a one-shot. */ iwl_write8(trans, CSR_INT_PERIODIC_REG, CSR_INT_PERIODIC_DIS); iwl_pcie_rx_handle(trans); /* * Enable periodic interrupt in 8 msec only if we received * real RX interrupt (instead of just periodic int), to catch * any dangling Rx interrupt. If it was just the periodic * interrupt, there was no dangling Rx activity, and no need * to extend the periodic interrupt; one-shot is enough. */ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) iwl_write8(trans, CSR_INT_PERIODIC_REG, CSR_INT_PERIODIC_ENA); isr_stats->rx++; } /* This "Tx" DMA channel is used only for loading uCode */ if (inta & CSR_INT_BIT_FH_TX) { iwl_write32(trans, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK); IWL_DEBUG_ISR(trans, "uCode load interrupt\n"); isr_stats->tx++; handled |= CSR_INT_BIT_FH_TX; /* Wake up uCode load routine, now that load is complete */ trans_pcie->ucode_write_complete = true; wake_up(&trans_pcie->ucode_write_waitq); } if (inta & ~handled) { IWL_ERR(trans, "Unhandled INTA bits 0x%08x\n", inta & ~handled); isr_stats->unhandled++; } if (inta & ~(trans_pcie->inta_mask)) { IWL_WARN(trans, "Disabled INTA bits 0x%08x were pending\n", inta & ~trans_pcie->inta_mask); } /* Re-enable all interrupts */ /* only Re-enable if disabled by irq */ if (test_bit(STATUS_INT_ENABLED, &trans->status)) iwl_enable_interrupts(trans); /* Re-enable RF_KILL if it occurred */ else if (handled & CSR_INT_BIT_RF_KILL) iwl_enable_rfkill_int(trans); out: lock_map_release(&trans->sync_cmd_lockdep_map); return IRQ_HANDLED; } /****************************************************************************** * * ICT functions * ******************************************************************************/ /* a device (PCI-E) page is 4096 bytes long */ #define ICT_SHIFT 12 #define ICT_SIZE (1 << ICT_SHIFT) #define ICT_COUNT (ICT_SIZE / sizeof(u32)) /* Free dram table */ void iwl_pcie_free_ict(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); if (trans_pcie->ict_tbl) { dma_free_coherent(trans->dev, ICT_SIZE, trans_pcie->ict_tbl, trans_pcie->ict_tbl_dma); trans_pcie->ict_tbl = NULL; trans_pcie->ict_tbl_dma = 0; } } /* * allocate dram shared table, it is an aligned memory * block of ICT_SIZE. * also reset all data related to ICT table interrupt. */ int iwl_pcie_alloc_ict(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); trans_pcie->ict_tbl = dma_zalloc_coherent(trans->dev, ICT_SIZE, &trans_pcie->ict_tbl_dma, GFP_KERNEL); if (!trans_pcie->ict_tbl) return -ENOMEM; /* just an API sanity check ... it is guaranteed to be aligned */ if (WARN_ON(trans_pcie->ict_tbl_dma & (ICT_SIZE - 1))) { iwl_pcie_free_ict(trans); return -EINVAL; } IWL_DEBUG_ISR(trans, "ict dma addr %Lx ict vir addr %p\n", (unsigned long long)trans_pcie->ict_tbl_dma, trans_pcie->ict_tbl); return 0; } /* Device is going up inform it about using ICT interrupt table, * also we need to tell the driver to start using ICT interrupt. */ void iwl_pcie_reset_ict(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); u32 val; unsigned long flags; if (!trans_pcie->ict_tbl) return; spin_lock_irqsave(&trans_pcie->irq_lock, flags); iwl_disable_interrupts(trans); memset(trans_pcie->ict_tbl, 0, ICT_SIZE); val = trans_pcie->ict_tbl_dma >> ICT_SHIFT; val |= CSR_DRAM_INT_TBL_ENABLE; val |= CSR_DRAM_INIT_TBL_WRAP_CHECK; IWL_DEBUG_ISR(trans, "CSR_DRAM_INT_TBL_REG =0x%x\n", val); iwl_write32(trans, CSR_DRAM_INT_TBL_REG, val); trans_pcie->use_ict = true; trans_pcie->ict_index = 0; iwl_write32(trans, CSR_INT, trans_pcie->inta_mask); iwl_enable_interrupts(trans); spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); } /* Device is going down disable ict interrupt usage */ void iwl_pcie_disable_ict(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); unsigned long flags; spin_lock_irqsave(&trans_pcie->irq_lock, flags); trans_pcie->use_ict = false; spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); } /* legacy (non-ICT) ISR. Assumes that trans_pcie->irq_lock is held */ static irqreturn_t iwl_pcie_isr_non_ict(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); u32 inta; lockdep_assert_held(&trans_pcie->irq_lock); trace_iwlwifi_dev_irq(trans->dev); /* Discover which interrupts are active/pending */ inta = iwl_read32(trans, CSR_INT); if (inta & (~trans_pcie->inta_mask)) { IWL_DEBUG_ISR(trans, "We got a masked interrupt (0x%08x)...Ack and ignore\n", inta & (~trans_pcie->inta_mask)); iwl_write32(trans, CSR_INT, inta & (~trans_pcie->inta_mask)); inta &= trans_pcie->inta_mask; } /* Ignore interrupt if there's nothing in NIC to service. * This may be due to IRQ shared with another device, * or due to sporadic interrupts thrown from our NIC. */ if (!inta) { IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); /* * Re-enable interrupts here since we don't have anything to * service, but only in case the handler won't run. Note that * the handler can be scheduled because of a previous * interrupt. */ if (test_bit(STATUS_INT_ENABLED, &trans->status) && !trans_pcie->inta) iwl_enable_interrupts(trans); return IRQ_NONE; } if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { /* Hardware disappeared. It might have already raised * an interrupt */ IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta); return IRQ_HANDLED; } if (iwl_have_debug_level(IWL_DL_ISR)) IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, trans_pcie->inta_mask, iwl_read32(trans, CSR_FH_INT_STATUS)); trans_pcie->inta |= inta; /* the thread will service interrupts and re-enable them */ return IRQ_WAKE_THREAD; } /* interrupt handler using ict table, with this interrupt driver will * stop using INTA register to get device's interrupt, reading this register * is expensive, device will write interrupts in ICT dram table, increment * index then will fire interrupt to driver, driver will OR all ICT table * entries from current index up to table entry with 0 value. the result is * the interrupt we need to service, driver will set the entries back to 0 and * set index. */ static irqreturn_t iwl_pcie_isr_ict(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); unsigned long flags; irqreturn_t ret; u32 inta; u32 val = 0; u32 read; spin_lock_irqsave(&trans_pcie->irq_lock, flags); /* dram interrupt table not set yet, * use legacy interrupt. */ if (unlikely(!trans_pcie->use_ict)) { ret = iwl_pcie_isr_non_ict(trans); spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); return ret; } trace_iwlwifi_dev_irq(trans->dev); /* Ignore interrupt if there's nothing in NIC to service. * This may be due to IRQ shared with another device, * or due to sporadic interrupts thrown from our NIC. */ read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read); if (!read) { IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); goto none; } /* * Collect all entries up to the first 0, starting from ict_index; * note we already read at ict_index. */ do { val |= read; IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n", trans_pcie->ict_index, read); trans_pcie->ict_tbl[trans_pcie->ict_index] = 0; trans_pcie->ict_index = iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT); read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read); } while (read); /* We should not get this value, just ignore it. */ if (val == 0xffffffff) val = 0; /* * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit * (bit 15 before shifting it to 31) to clear when using interrupt * coalescing. fortunately, bits 18 and 19 stay set when this happens * so we use them to decide on the real state of the Rx bit. * In order words, bit 15 is set if bit 18 or bit 19 are set. */ if (val & 0xC0000) val |= 0x8000; inta = (0xff & val) | ((0xff00 & val) << 16); IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled(sw) 0x%08x ict 0x%08x\n", inta, trans_pcie->inta_mask, val); if (iwl_have_debug_level(IWL_DL_ISR)) IWL_DEBUG_ISR(trans, "enabled(hw) 0x%08x\n", iwl_read32(trans, CSR_INT_MASK)); inta &= trans_pcie->inta_mask; trans_pcie->inta |= inta; /* iwl_pcie_tasklet() will service interrupts and re-enable them */ if (likely(inta)) { spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); return IRQ_WAKE_THREAD; } ret = IRQ_HANDLED; none: /* re-enable interrupts here since we don't have anything to service. * only Re-enable if disabled by irq. */ if (test_bit(STATUS_INT_ENABLED, &trans->status) && !trans_pcie->inta) iwl_enable_interrupts(trans); spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); return ret; } irqreturn_t iwl_pcie_isr(int irq, void *data) { struct iwl_trans *trans = data; if (!trans) return IRQ_NONE; /* Disable (but don't clear!) interrupts here to avoid * back-to-back ISRs and sporadic interrupts from our NIC. * If we have something to service, the tasklet will re-enable ints. * If we *don't* have something, we'll re-enable before leaving here. */ iwl_write32(trans, CSR_INT_MASK, 0x00000000); return iwl_pcie_isr_ict(trans); }