/* * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "intel_sas.h" #include "intel_ata.h" #include "isci.h" #include "port.h" #include "remote_device.h" #include "request.h" #include "scic_controller.h" #include "scic_io_request.h" #include "scic_phy.h" #include "scic_port.h" #include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" #include "scic_sds_request.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" #include "task.h" /** * isci_remote_device_change_state() - This function gets the status of the * remote_device object. * @isci_device: This parameter points to the isci_remote_device object * * status of the object as a isci_status enum. */ void isci_remote_device_change_state( struct isci_remote_device *isci_device, enum isci_status status) { unsigned long flags; spin_lock_irqsave(&isci_device->state_lock, flags); isci_device->status = status; spin_unlock_irqrestore(&isci_device->state_lock, flags); } /** * isci_remote_device_not_ready() - This function is called by the scic when * the remote device is not ready. We mark the isci device as ready (not * "ready_for_io") and signal the waiting proccess. * @isci_host: This parameter specifies the isci host object. * @isci_device: This parameter specifies the remote device * */ static void isci_remote_device_not_ready(struct isci_host *ihost, struct isci_remote_device *idev, u32 reason) { dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, idev); if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) isci_remote_device_change_state(idev, isci_stopping); else /* device ready is actually a "not ready for io" state. */ isci_remote_device_change_state(idev, isci_ready); } /** * isci_remote_device_ready() - This function is called by the scic when the * remote device is ready. We mark the isci device as ready and signal the * waiting proccess. * @ihost: our valid isci_host * @idev: remote device * */ static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev) { dev_dbg(&ihost->pdev->dev, "%s: idev = %p\n", __func__, idev); isci_remote_device_change_state(idev, isci_ready_for_io); if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) wake_up(&ihost->eventq); } /* called once the remote node context is ready to be freed. * The remote device can now report that its stop operation is complete. none */ static void rnc_destruct_done(void *_dev) { struct scic_sds_remote_device *sci_dev = _dev; BUG_ON(sci_dev->started_request_count != 0); sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); } static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds_remote_device *sci_dev) { struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; u32 i, request_count = sci_dev->started_request_count; enum sci_status status = SCI_SUCCESS; for (i = 0; i < SCI_MAX_IO_REQUESTS && i < request_count; i++) { struct scic_sds_request *sci_req; enum sci_status s; sci_req = scic->io_request_table[i]; if (!sci_req || sci_req->target_device != sci_dev) continue; s = scic_controller_terminate_request(scic, sci_dev, sci_req); if (s != SCI_SUCCESS) status = s; } return status; } enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, u32 timeout) { struct sci_base_state_machine *sm = &sci_dev->state_machine; enum scic_sds_remote_device_states state = sm->current_state_id; switch (state) { case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: default: dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: return SCI_SUCCESS; case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: /* device not started so there had better be no requests */ BUG_ON(sci_dev->started_request_count != 0); scic_sds_remote_node_context_destruct(&sci_dev->rnc, rnc_destruct_done, sci_dev); /* Transition to the stopping state and wait for the * remote node to complete being posted and invalidated. */ sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); return SCI_SUCCESS; case SCI_BASE_REMOTE_DEVICE_STATE_READY: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); if (sci_dev->started_request_count == 0) { scic_sds_remote_node_context_destruct(&sci_dev->rnc, rnc_destruct_done, sci_dev); return SCI_SUCCESS; } else return scic_sds_remote_device_terminate_requests(sci_dev); break; case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: /* All requests should have been terminated, but if there is an * attempt to stop a device already in the stopping state, then * try again to terminate. */ return scic_sds_remote_device_terminate_requests(sci_dev); case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); return SCI_SUCCESS; } } enum sci_status scic_remote_device_reset(struct scic_sds_remote_device *sci_dev) { struct sci_base_state_machine *sm = &sci_dev->state_machine; enum scic_sds_remote_device_states state = sm->current_state_id; switch (state) { case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: default: dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_BASE_REMOTE_DEVICE_STATE_READY: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); return SCI_SUCCESS; } } enum sci_status scic_remote_device_reset_complete( struct scic_sds_remote_device *sci_dev) { return sci_dev->state_handlers->reset_complete_handler(sci_dev); } #define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0) #define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES) /** * * @sci_dev: The remote device for which the suspend is being requested. * * This method invokes the remote device suspend state handler. enum sci_status */ enum sci_status scic_sds_remote_device_suspend( struct scic_sds_remote_device *sci_dev, u32 suspend_type) { return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type); } /** * * @sci_dev: The remote device for which the event handling is being * requested. * @frame_index: This is the frame index that is being processed. * * This method invokes the frame handler for the remote device state machine * enum sci_status */ enum sci_status scic_sds_remote_device_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) { return sci_dev->state_handlers->frame_handler(sci_dev, frame_index); } /** * * @sci_dev: The remote device for which the event handling is being * requested. * @event_code: This is the event code that is to be processed. * * This method invokes the remote device event handler. enum sci_status */ enum sci_status scic_sds_remote_device_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code) { return sci_dev->state_handlers->event_handler(sci_dev, event_code); } /** * * @controller: The controller that is starting the io request. * @sci_dev: The remote device for which the start io handling is being * requested. * @io_request: The io request that is being started. * * This method invokes the remote device start io handler. enum sci_status */ enum sci_status scic_sds_remote_device_start_io( struct scic_sds_controller *controller, struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request) { return sci_dev->state_handlers->start_io_handler( sci_dev, io_request); } /** * * @controller: The controller that is completing the io request. * @sci_dev: The remote device for which the complete io handling is being * requested. * @io_request: The io request that is being completed. * * This method invokes the remote device complete io handler. enum sci_status */ enum sci_status scic_sds_remote_device_complete_io( struct scic_sds_controller *controller, struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request) { return sci_dev->state_handlers->complete_io_handler( sci_dev, io_request); } /** * * @controller: The controller that is starting the task request. * @sci_dev: The remote device for which the start task handling is being * requested. * @io_request: The task request that is being started. * * This method invokes the remote device start task handler. enum sci_status */ enum sci_status scic_sds_remote_device_start_task( struct scic_sds_controller *controller, struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request) { return sci_dev->state_handlers->start_task_handler( sci_dev, io_request); } /** * * @sci_dev: * @request: * * This method takes the request and bulids an appropriate SCU context for the * request and then requests the controller to post the request. none */ void scic_sds_remote_device_post_request( struct scic_sds_remote_device *sci_dev, u32 request) { u32 context; context = scic_sds_remote_device_build_command_context(sci_dev, request); scic_sds_controller_post_request( scic_sds_remote_device_get_controller(sci_dev), context ); } /* called once the remote node context has transisitioned to a * ready state. This is the indication that the remote device object can also * transition to ready. */ static void remote_device_resume_done(void *_dev) { struct scic_sds_remote_device *sci_dev = _dev; enum scic_sds_remote_device_states state; state = sci_dev->state_machine.current_state_id; switch (state) { case SCI_BASE_REMOTE_DEVICE_STATE_READY: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: break; default: /* go 'ready' if we are not already in a ready state */ sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_READY); break; } } /** * * @device: This parameter specifies the device for which the request is being * started. * @request: This parameter specifies the request being started. * @status: This parameter specifies the current start operation status. * * This method will perform the STP request start processing common to IO * requests and task requests of all types. none */ static void scic_sds_remote_device_start_request( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req, enum sci_status status) { /* We still have a fault in starting the io complete it on the port */ if (status == SCI_SUCCESS) scic_sds_remote_device_increment_request_count(sci_dev); else{ sci_dev->owning_port->state_handlers->complete_io_handler( sci_dev->owning_port, sci_dev, sci_req ); } } /** * * @request: This parameter specifies the request being continued. * * This method will continue to post tc for a STP request. This method usually * serves as a callback when RNC gets resumed during a task management * sequence. none */ static void scic_sds_remote_device_continue_request(void *dev) { struct scic_sds_remote_device *sci_dev = dev; /* we need to check if this request is still valid to continue. */ if (sci_dev->working_request) scic_controller_continue_io(sci_dev->working_request); } static enum sci_status default_device_handler(struct scic_sds_remote_device *sci_dev, const char *func) { dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", func, sci_base_state_machine_get_state(&sci_dev->state_machine)); return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_remote_device_default_reset_complete_handler( struct scic_sds_remote_device *sci_dev) { return default_device_handler(sci_dev, __func__); } static enum sci_status scic_sds_remote_device_default_suspend_handler( struct scic_sds_remote_device *sci_dev, u32 suspend_type) { return default_device_handler(sci_dev, __func__); } static enum sci_status scic_sds_remote_device_default_resume_handler( struct scic_sds_remote_device *sci_dev) { return default_device_handler(sci_dev, __func__); } /** * * @device: The struct scic_sds_remote_device which is then cast into a * struct scic_sds_remote_device. * @event_code: The event code that the struct scic_sds_controller wants the device * object to process. * * This method is the default event handler. It will call the RNC state * machine handler for any RNC events otherwise it will log a warning and * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE */ static enum sci_status scic_sds_remote_device_core_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code, bool is_ready_state) { enum sci_status status; switch (scu_get_event_type(event_code)) { case SCU_EVENT_TYPE_RNC_OPS_MISC: case SCU_EVENT_TYPE_RNC_SUSPEND_TX: case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); break; case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { status = SCI_SUCCESS; /* Suspend the associated RNC */ scic_sds_remote_node_context_suspend(&sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); dev_dbg(scirdev_to_dev(sci_dev), "%s: device: %p event code: %x: %s\n", __func__, sci_dev, event_code, (is_ready_state) ? "I_T_Nexus_Timeout event" : "I_T_Nexus_Timeout event in wrong state"); break; } /* Else, fall through and treat as unhandled... */ default: dev_dbg(scirdev_to_dev(sci_dev), "%s: device: %p event code: %x: %s\n", __func__, sci_dev, event_code, (is_ready_state) ? "unexpected event" : "unexpected event in wrong state"); status = SCI_FAILURE_INVALID_STATE; break; } return status; } /** * * @device: The struct scic_sds_remote_device which is then cast into a * struct scic_sds_remote_device. * @event_code: The event code that the struct scic_sds_controller wants the device * object to process. * * This method is the default event handler. It will call the RNC state * machine handler for any RNC events otherwise it will log a warning and * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE */ static enum sci_status scic_sds_remote_device_default_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code) { return scic_sds_remote_device_core_event_handler(sci_dev, event_code, false); } /** * * @device: The struct scic_sds_remote_device which is then cast into a * struct scic_sds_remote_device. * @frame_index: The frame index for which the struct scic_sds_controller wants this * device object to process. * * This method is the default unsolicited frame handler. It logs a warning, * releases the frame and returns a failure. enum sci_status * SCI_FAILURE_INVALID_STATE */ static enum sci_status scic_sds_remote_device_default_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) { dev_warn(scirdev_to_dev(sci_dev), "%s: SCIC Remote Device requested to handle frame %x " "while in wrong state %d\n", __func__, frame_index, sci_base_state_machine_get_state( &sci_dev->state_machine)); /* Return the frame back to the controller */ scic_sds_controller_release_frame( scic_sds_remote_device_get_controller(sci_dev), frame_index ); return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_remote_device_default_start_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { return default_device_handler(sci_dev, __func__); } static enum sci_status scic_sds_remote_device_default_complete_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { return default_device_handler(sci_dev, __func__); } static enum sci_status scic_sds_remote_device_default_continue_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { return default_device_handler(sci_dev, __func__); } /** * * @device: The struct scic_sds_remote_device which is then cast into a * struct scic_sds_remote_device. * @frame_index: The frame index for which the struct scic_sds_controller wants this * device object to process. * * This method is a general ssp frame handler. In most cases the device object * needs to route the unsolicited frame processing to the io request object. * This method decodes the tag for the io request object and routes the * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE */ static enum sci_status scic_sds_remote_device_general_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) { enum sci_status result; struct sci_ssp_frame_header *frame_header; struct scic_sds_request *io_request; result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), frame_index, (void **)&frame_header ); if (SCI_SUCCESS == result) { io_request = scic_sds_controller_get_io_request_from_tag( scic_sds_remote_device_get_controller(sci_dev), frame_header->tag); if ((io_request == NULL) || (io_request->target_device != sci_dev)) { /* * We could not map this tag to a valid IO request * Just toss the frame and continue */ scic_sds_controller_release_frame( scic_sds_remote_device_get_controller(sci_dev), frame_index ); } else { /* The IO request is now in charge of releasing the frame */ result = io_request->state_handlers->frame_handler( io_request, frame_index); } } return result; } /** * * @[in]: sci_dev This is the device object that is receiving the event. * @[in]: event_code The event code to process. * * This is a common method for handling events reported to the remote device * from the controller object. enum sci_status */ static enum sci_status scic_sds_remote_device_general_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code) { return scic_sds_remote_device_core_event_handler(sci_dev, event_code, true); } /* * This method will attempt to start a task request for this device object. The * remote device object will issue the start request for the task and if * successful it will start the request for the port object then increment its * own requet count. enum sci_status SCI_SUCCESS if the task request is started for * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request * object could not get the resources to start. */ static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status result; /* See if the port is in a state where we can start the IO request */ result = scic_sds_port_start_io( scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (result == SCI_SUCCESS) { result = scic_sds_remote_node_context_start_task(&sci_dev->rnc, request); if (result == SCI_SUCCESS) result = scic_sds_request_start(request); scic_sds_remote_device_start_request(sci_dev, request, result); } return result; } /* * This method will attempt to start an io request for this device object. The * remote device object will issue the start request for the io and if * successful it will start the request for the port object then increment its * own requet count. enum sci_status SCI_SUCCESS if the io request is started for * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request * object could not get the resources to start. */ static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status result; /* See if the port is in a state where we can start the IO request */ result = scic_sds_port_start_io( scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (result == SCI_SUCCESS) { result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); if (result == SCI_SUCCESS) result = scic_sds_request_start(request); scic_sds_remote_device_start_request(sci_dev, request, result); } return result; } /* * This method will complete the request for the remote device object. The * method will call the completion handler for the request object and if * successful it will complete the request on the port object then decrement * its own started_request_count. enum sci_status */ static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status result; result = scic_sds_request_complete(request); if (result != SCI_SUCCESS) return result; /* See if the port is in a state * where we can start the IO request */ result = scic_sds_port_complete_io( scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (result == SCI_SUCCESS) scic_sds_remote_device_decrement_request_count(sci_dev); return result; } /** * * @device: The device object for which the request is completing. * @request: The task request that is being completed. * * This method completes requests for this struct scic_sds_remote_device while it is * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the * complete method for the request object and if that is successful the port * object is called to complete the task request. Then the device object itself * completes the task request. If struct scic_sds_remote_device started_request_count * goes to 0 and the invalidate RNC request has completed the device object can * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status */ static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status status = SCI_SUCCESS; status = scic_sds_request_complete(request); if (status != SCI_SUCCESS) return status; status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (status != SCI_SUCCESS) return status; scic_sds_remote_device_decrement_request_count(sci_dev); if (scic_sds_remote_device_get_request_count(sci_dev) == 0) scic_sds_remote_node_context_destruct(&sci_dev->rnc, rnc_destruct_done, sci_dev); return SCI_SUCCESS; } static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( struct scic_sds_remote_device *sci_dev) { sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_READY); return SCI_SUCCESS; } /* complete requests for this device while it is in the * SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the complete * method for the request object and if that is successful the port object is * called to complete the task request. Then the device object itself completes * the task request. enum sci_status */ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status status = SCI_SUCCESS; status = scic_sds_request_complete(request); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (status == SCI_SUCCESS) { scic_sds_remote_device_decrement_request_count(sci_dev); } } return status; } static enum sci_status scic_sds_stp_remote_device_complete_request(struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) { enum sci_status status; status = scic_sds_io_request_complete(sci_req); if (status != SCI_SUCCESS) goto out; status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req); if (status != SCI_SUCCESS) goto out; scic_sds_remote_device_decrement_request_count(sci_dev); if (sci_req->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { /* This request causes hardware error, device needs to be Lun Reset. * So here we force the state machine to IDLE state so the rest IOs * can reach RNC state handler, these IOs will be completed by RNC with * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET); } else if (scic_sds_remote_device_get_request_count(sci_dev) == 0) sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); out: if (status != SCI_SUCCESS) dev_err(scirdev_to_dev(sci_dev), "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " "could not complete\n", __func__, sci_dev->owning_port, sci_dev, sci_req, status); return status; } /* scic_sds_stp_remote_device_ready_substate_start_request_handler - start stp * @device: The target device a task management request towards to. * @request: The task request. * * This is the READY NCQ substate handler to start task management request. In * this routine, we suspend and resume the RNC. enum sci_status Always return * SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to let * controller_start_task_handler know that the controller can't post TC for * task request yet, instead, when RNC gets resumed, a controller_continue_task * callback will be called. */ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( struct scic_sds_remote_device *device, struct scic_sds_request *request) { enum sci_status status; /* Will the port allow the io request to start? */ status = device->owning_port->state_handlers->start_io_handler( device->owning_port, device, request); if (status != SCI_SUCCESS) return status; status = scic_sds_remote_node_context_start_task(&device->rnc, request); if (status != SCI_SUCCESS) goto out; status = request->state_handlers->start_handler(request); if (status != SCI_SUCCESS) goto out; /* * Note: If the remote device state is not IDLE this will replace * the request that probably resulted in the task management request. */ device->working_request = request; sci_base_state_machine_change_state(&device->state_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); /* * The remote node context must cleanup the TCi to NCQ mapping table. * The only way to do this correctly is to either write to the TLCR * register or to invalidate and repost the RNC. In either case the * remote node context state machine will take the correct action when * the remote node context is suspended and later resumed. */ scic_sds_remote_node_context_suspend(&device->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); scic_sds_remote_node_context_resume(&device->rnc, scic_sds_remote_device_continue_request, device); out: scic_sds_remote_device_start_request(device, request, status); /* * We need to let the controller start request handler know that it can't * post TC yet. We will provide a callback function to post TC when RNC gets * resumed. */ return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; } /* handle the start io operation for a sata device that is in the command idle * state. - Evalute the type of IO request to be started - If its an NCQ * request change to NCQ substate - If its any other command change to the CMD * substate * * If this is a softreset we may want to have a different substate. */ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status status; struct isci_request *isci_request = request->ireq; enum scic_sds_remote_device_states new_state; /* Will the port allow the io request to start? */ status = sci_dev->owning_port->state_handlers->start_io_handler( sci_dev->owning_port, sci_dev, request); if (status != SCI_SUCCESS) return status; status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); if (status != SCI_SUCCESS) goto out; status = request->state_handlers->start_handler(request); if (status != SCI_SUCCESS) goto out; if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ; else { sci_dev->working_request = request; new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD; } sci_base_state_machine_change_state(&sci_dev->state_machine, new_state); out: scic_sds_remote_device_start_request(sci_dev, request, status); return status; } static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code) { enum sci_status status; status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); if (status != SCI_SUCCESS) return status; /* We pick up suspension events to handle specifically to this state. We * resume the RNC right away. enum sci_status */ if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) status = scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); return status; } static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status status; struct isci_request *isci_request = request->ireq; scic_sds_port_io_request_handler_t start_io; if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { start_io = sci_dev->owning_port->state_handlers->start_io_handler; status = start_io(sci_dev->owning_port, sci_dev, request); if (status != SCI_SUCCESS) return status; status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); if (status == SCI_SUCCESS) status = request->state_handlers->start_handler(request); scic_sds_remote_device_start_request(sci_dev, request, status); } else status = SCI_FAILURE_INVALID_STATE; return status; } static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler(struct scic_sds_remote_device *sci_dev, u32 frame_index) { enum sci_status status; struct sata_fis_header *frame_header; struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, frame_index, (void **)&frame_header); if (status != SCI_SUCCESS) return status; if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS && (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; /* TODO Check sactive and complete associated IO if any. */ sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H && (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { /* * Some devices return D2H FIS when an NCQ error is detected. * Treat this like an SDB error FIS ready reason. */ sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); } else status = SCI_FAILURE; scic_sds_controller_release_frame(scic, frame_index); return status; } static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( struct scic_sds_remote_device *device, struct scic_sds_request *request) { /* device is already handling a command it can not accept new commands * until this one is complete. */ return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( struct scic_sds_remote_device *sci_dev, u32 suspend_type) { enum sci_status status; status = scic_sds_remote_node_context_suspend(&sci_dev->rnc, suspend_type, NULL, NULL); return status; } static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) { /* The device doe not process any UF received from the hardware while * in this state. All unsolicited frames are forwarded to the io * request object. */ return scic_sds_io_request_frame_handler(sci_dev->working_request, frame_index); } static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( struct scic_sds_remote_device *device, struct scic_sds_request *request) { return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; } static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( struct scic_sds_remote_device *device, struct scic_sds_request *request) { struct scic_sds_request *sci_req = request; enum sci_status status; status = scic_sds_io_request_complete(sci_req); if (status != SCI_SUCCESS) goto out; status = scic_sds_port_complete_io(device->owning_port, device, sci_req); if (status != SCI_SUCCESS) goto out; scic_sds_remote_device_decrement_request_count(device); out: if (status != SCI_SUCCESS) dev_err(scirdev_to_dev(device), "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " "could not complete\n", __func__, device->owning_port, device, sci_req, status); return status; } static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) { struct scic_sds_remote_device *sci_dev = _dev; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; /* For NCQ operation we do not issue a isci_remote_device_not_ready(). * As a result, avoid sending the ready notification. */ if (sci_dev->state_machine.previous_state_id != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) isci_remote_device_ready(scic->ihost, idev); } static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) { enum sci_status status; /* Will the port allow the io request to start? */ status = sci_dev->owning_port->state_handlers->start_io_handler( sci_dev->owning_port, sci_dev, sci_req); if (status != SCI_SUCCESS) return status; status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); if (status != SCI_SUCCESS) goto out; status = scic_sds_request_start(sci_req); if (status != SCI_SUCCESS) goto out; sci_dev->working_request = sci_req; sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); out: scic_sds_remote_device_start_request(sci_dev, sci_req, status); return status; } static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( struct scic_sds_remote_device *device, struct scic_sds_request *request) { /* device is already handling a command it can not accept new commands * until this one is complete. */ return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler(struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) { enum sci_status status; status = scic_sds_io_request_complete(sci_req); if (status != SCI_SUCCESS) return status; status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req); if (status != SCI_SUCCESS) { dev_err(scirdev_to_dev(sci_dev), "%s: SCIC SDS Remote Device 0x%p io request " "0x%p could not be completd on the port 0x%p " "failed with status %d.\n", __func__, sci_dev, sci_req, sci_dev->owning_port, status); return status; } scic_sds_remote_device_decrement_request_count(sci_dev); sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); return status; } static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) { enum sci_status status; /* The device does not process any UF received from the hardware while * in this state. All unsolicited frames are forwarded to the io request * object. */ status = scic_sds_io_request_frame_handler( sci_dev->working_request, frame_index ); return status; } static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler } }; static void scic_sds_remote_device_initial_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); /* Initial state is a transitional state to the stopped state */ sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); } /** * scic_remote_device_destruct() - free remote node context and destruct * @remote_device: This parameter specifies the remote device to be destructed. * * Remote device objects are a limited resource. As such, they must be * protected. Thus calls to construct and destruct are mutually exclusive and * non-reentrant. The return value shall indicate if the device was * successfully destructed or if some failure occurred. enum sci_status This value * is returned if the device is successfully destructed. * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied * device isn't valid (e.g. it's already been destoryed, the handle isn't * valid, etc.). */ static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device *sci_dev) { struct sci_base_state_machine *sm = &sci_dev->state_machine; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_controller *scic; if (state != SCI_BASE_REMOTE_DEVICE_STATE_STOPPED) { dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } scic = sci_dev->owning_port->owning_controller; scic_sds_controller_free_remote_node_context(scic, sci_dev, sci_dev->rnc.remote_node_index); sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_FINAL); return SCI_SUCCESS; } /** * isci_remote_device_deconstruct() - This function frees an isci_remote_device. * @ihost: This parameter specifies the isci host object. * @idev: This parameter specifies the remote device to be freed. * */ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_remote_device *idev) { dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, idev); /* There should not be any outstanding io's. All paths to * here should go through isci_remote_device_nuke_requests. * If we hit this condition, we will need a way to complete * io requests in process */ while (!list_empty(&idev->reqs_in_process)) { dev_err(&ihost->pdev->dev, "%s: ** request list not empty! **\n", __func__); BUG(); } scic_remote_device_destruct(&idev->sci); idev->domain_dev->lldd_dev = NULL; idev->domain_dev = NULL; idev->isci_port = NULL; list_del_init(&idev->node); clear_bit(IDEV_START_PENDING, &idev->flags); clear_bit(IDEV_STOP_PENDING, &idev->flags); wake_up(&ihost->eventq); } /** * isci_remote_device_stop_complete() - This function is called by the scic * when the remote device stop has completed. We mark the isci device as not * ready and remove the isci remote device. * @ihost: This parameter specifies the isci host object. * @idev: This parameter specifies the remote device. * @status: This parameter specifies status of the completion. * */ static void isci_remote_device_stop_complete(struct isci_host *ihost, struct isci_remote_device *idev) { dev_dbg(&ihost->pdev->dev, "%s: complete idev = %p\n", __func__, idev); isci_remote_device_change_state(idev, isci_stopped); /* after stop, we can tear down resources. */ isci_remote_device_deconstruct(ihost, idev); } static void scic_sds_remote_device_stopped_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic; struct isci_remote_device *idev; struct isci_host *ihost; u32 prev_state; scic = scic_sds_remote_device_get_controller(sci_dev); ihost = scic->ihost; idev = sci_dev_to_idev(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); /* If we are entering from the stopping state let the SCI User know that * the stop operation has completed. */ prev_state = sci_dev->state_machine.previous_state_id; if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) isci_remote_device_stop_complete(ihost, idev); scic_sds_controller_remote_device_stopped(scic, sci_dev); } static void scic_sds_remote_device_starting_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_STARTING); isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); } static void scic_sds_remote_device_ready_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct domain_device *dev = sci_dev_to_domain(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_READY); scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } else if (dev_is_expander(dev)) { sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } else isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev)); } static void scic_sds_remote_device_ready_state_exit(void *object) { struct scic_sds_remote_device *sci_dev = object; struct domain_device *dev = sci_dev_to_domain(sci_dev); if (dev->dev_type == SAS_END_DEV) { struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); isci_remote_device_not_ready(scic->ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); } } static void scic_sds_remote_device_stopping_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER( sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING ); } static void scic_sds_remote_device_failed_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER( sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_FAILED ); } static void scic_sds_remote_device_resetting_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER( sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_RESETTING ); scic_sds_remote_node_context_suspend( &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); } static void scic_sds_remote_device_resetting_state_exit(void *object) { struct scic_sds_remote_device *sci_dev = object; scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); } static void scic_sds_remote_device_final_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER( sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_FINAL ); } static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); sci_dev->working_request = NULL; if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { /* * Since the RNC is ready, it's alright to finish completion * processing (e.g. signal the remote device is ready). */ scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(sci_dev); } else { scic_sds_remote_node_context_resume(&sci_dev->rnc, scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, sci_dev); } } static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); BUG_ON(sci_dev->working_request == NULL); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev), SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); } static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); if (sci_dev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) isci_remote_device_not_ready(scic->ihost, idev, sci_dev->not_ready_reason); } static void scic_sds_stp_remote_device_ready_await_reset_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET); } static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev)); } static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); BUG_ON(sci_dev->working_request == NULL); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev), SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object) { struct scic_sds_remote_device *sci_dev = object; sci_dev->working_request = NULL; } static const struct sci_base_state scic_sds_remote_device_state_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { .enter_state = scic_sds_remote_device_initial_state_enter, }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { .enter_state = scic_sds_remote_device_stopped_state_enter, }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { .enter_state = scic_sds_remote_device_starting_state_enter, }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { .enter_state = scic_sds_remote_device_ready_state_enter, .exit_state = scic_sds_remote_device_ready_state_exit }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter, }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { .enter_state = scic_sds_remote_device_stopping_state_enter, }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { .enter_state = scic_sds_remote_device_failed_state_enter, }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { .enter_state = scic_sds_remote_device_resetting_state_enter, .exit_state = scic_sds_remote_device_resetting_state_exit }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { .enter_state = scic_sds_remote_device_final_state_enter, }, }; /** * scic_remote_device_construct() - common construction * @sci_port: SAS/SATA port through which this device is accessed. * @sci_dev: remote device to construct * * This routine just performs benign initialization and does not * allocate the remote_node_context which is left to * scic_remote_device_[de]a_construct(). scic_remote_device_destruct() * frees the remote_node_context(s) for the device. */ static void scic_remote_device_construct(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev) { sci_dev->owning_port = sci_port; sci_dev->started_request_count = 0; sci_base_state_machine_construct( &sci_dev->state_machine, sci_dev, scic_sds_remote_device_state_table, SCI_BASE_REMOTE_DEVICE_STATE_INITIAL ); sci_base_state_machine_start( &sci_dev->state_machine ); scic_sds_remote_node_context_construct(&sci_dev->rnc, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } /** * scic_remote_device_da_construct() - construct direct attached device. * * The information (e.g. IAF, Signature FIS, etc.) necessary to build * the device is known to the SCI Core since it is contained in the * scic_phy object. Remote node context(s) is/are a global resource * allocated by this routine, freed by scic_remote_device_destruct(). * * Returns: * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to * sata-only controller instance. * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev) { enum sci_status status; struct domain_device *dev = sci_dev_to_domain(sci_dev); scic_remote_device_construct(sci_port, sci_dev); /* * This information is request to determine how many remote node context * entries will be needed to store the remote node. */ sci_dev->is_direct_attached = true; status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller, sci_dev, &sci_dev->rnc.remote_node_index); if (status != SCI_SUCCESS) return status; if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev)) /* pass */; else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(sci_port); /* / @todo Should I assign the port width by reading all of the phys on the port? */ sci_dev->device_port_width = 1; return SCI_SUCCESS; } /** * scic_remote_device_ea_construct() - construct expander attached device * * Remote node context(s) is/are a global resource allocated by this * routine, freed by scic_remote_device_destruct(). * * Returns: * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to * sata-only controller instance. * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev) { struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status; scic_remote_device_construct(sci_port, sci_dev); status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller, sci_dev, &sci_dev->rnc.remote_node_index); if (status != SCI_SUCCESS) return status; if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev)) /* pass */; else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; /* * For SAS-2 the physical link rate is actually a logical link * rate that incorporates multiplexing. The SCU doesn't * incorporate multiplexing and for the purposes of the * connection the logical link rate is that same as the * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay * one another, so this code works for both situations. */ sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(sci_port), dev->linkrate); /* / @todo Should I assign the port width by reading all of the phys on the port? */ sci_dev->device_port_width = 1; return SCI_SUCCESS; } /** * scic_remote_device_start() - This method will start the supplied remote * device. This method enables normal IO requests to flow through to the * remote device. * @remote_device: This parameter specifies the device to be started. * @timeout: This parameter specifies the number of milliseconds in which the * start operation should complete. * * An indication of whether the device was successfully started. SCI_SUCCESS * This value is returned if the device was successfully started. * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start * the device when there have been no phys added to it. */ static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *sci_dev, u32 timeout) { struct sci_base_state_machine *sm = &sci_dev->state_machine; enum scic_sds_remote_device_states state = sm->current_state_id; enum sci_status status; if (state != SCI_BASE_REMOTE_DEVICE_STATE_STOPPED) { dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } status = scic_sds_remote_node_context_resume(&sci_dev->rnc, remote_device_resume_done, sci_dev); if (status != SCI_SUCCESS) return status; sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STARTING); return SCI_SUCCESS; } static enum sci_status isci_remote_device_construct(struct isci_port *iport, struct isci_remote_device *idev) { struct scic_sds_port *sci_port = iport->sci_port_handle; struct isci_host *ihost = iport->isci_host; struct domain_device *dev = idev->domain_dev; enum sci_status status; if (dev->parent && dev_is_expander(dev->parent)) status = scic_remote_device_ea_construct(sci_port, &idev->sci); else status = scic_remote_device_da_construct(sci_port, &idev->sci); if (status != SCI_SUCCESS) { dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n", __func__, status); return status; } /* start the device. */ status = scic_remote_device_start(&idev->sci, ISCI_REMOTE_DEVICE_START_TIMEOUT); if (status != SCI_SUCCESS) dev_warn(&ihost->pdev->dev, "remote device start failed: %d\n", status); return status; } void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev) { DECLARE_COMPLETION_ONSTACK(aborted_task_completion); dev_dbg(&ihost->pdev->dev, "%s: idev = %p\n", __func__, idev); /* Cleanup all requests pending for this device. */ isci_terminate_pending_requests(ihost, idev, terminating); dev_dbg(&ihost->pdev->dev, "%s: idev = %p, done\n", __func__, idev); } /** * This function builds the isci_remote_device when a libsas dev_found message * is received. * @isci_host: This parameter specifies the isci host object. * @port: This parameter specifies the isci_port conected to this device. * * pointer to new isci_remote_device. */ static struct isci_remote_device * isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) { struct isci_remote_device *idev; int i; for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { idev = &ihost->devices[i]; if (!test_and_set_bit(IDEV_ALLOCATED, &idev->flags)) break; } if (i >= SCI_MAX_REMOTE_DEVICES) { dev_warn(&ihost->pdev->dev, "%s: failed\n", __func__); return NULL; } if (WARN_ONCE(!list_empty(&idev->reqs_in_process), "found requests in process\n")) return NULL; if (WARN_ONCE(!list_empty(&idev->node), "found non-idle remote device\n")) return NULL; isci_remote_device_change_state(idev, isci_freed); return idev; } /** * isci_remote_device_stop() - This function is called internally to stop the * remote device. * @isci_host: This parameter specifies the isci host object. * @isci_device: This parameter specifies the remote device. * * The status of the scic request to stop. */ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) { enum sci_status status; unsigned long flags; dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, idev); isci_remote_device_change_state(idev, isci_stopping); /* Kill all outstanding requests. */ isci_remote_device_nuke_requests(ihost, idev); set_bit(IDEV_STOP_PENDING, &idev->flags); spin_lock_irqsave(&ihost->scic_lock, flags); status = scic_remote_device_stop(&idev->sci, 50); spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the stop complete callback. */ if (status == SCI_SUCCESS) { wait_for_device_stop(ihost, idev); clear_bit(IDEV_ALLOCATED, &idev->flags); } dev_dbg(&ihost->pdev->dev, "%s: idev = %p - after completion wait\n", __func__, idev); return status; } /** * isci_remote_device_gone() - This function is called by libsas when a domain * device is removed. * @domain_device: This parameter specifies the libsas domain device. * */ void isci_remote_device_gone(struct domain_device *dev) { struct isci_host *ihost = dev_to_ihost(dev); struct isci_remote_device *idev = dev->lldd_dev; dev_dbg(&ihost->pdev->dev, "%s: domain_device = %p, isci_device = %p, isci_port = %p\n", __func__, dev, idev, idev->isci_port); isci_remote_device_stop(ihost, idev); } /** * isci_remote_device_found() - This function is called by libsas when a remote * device is discovered. A remote device object is created and started. the * function then sleeps until the sci core device started message is * received. * @domain_device: This parameter specifies the libsas domain device. * * status, zero indicates success. */ int isci_remote_device_found(struct domain_device *domain_dev) { struct isci_host *isci_host = dev_to_ihost(domain_dev); struct isci_port *isci_port; struct isci_phy *isci_phy; struct asd_sas_port *sas_port; struct asd_sas_phy *sas_phy; struct isci_remote_device *isci_device; enum sci_status status; dev_dbg(&isci_host->pdev->dev, "%s: domain_device = %p\n", __func__, domain_dev); wait_for_start(isci_host); sas_port = domain_dev->port; sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy, port_phy_el); isci_phy = to_isci_phy(sas_phy); isci_port = isci_phy->isci_port; /* we are being called for a device on this port, * so it has to come up eventually */ wait_for_completion(&isci_port->start_complete); if ((isci_stopping == isci_port_get_state(isci_port)) || (isci_stopped == isci_port_get_state(isci_port))) return -ENODEV; isci_device = isci_remote_device_alloc(isci_host, isci_port); if (!isci_device) return -ENODEV; INIT_LIST_HEAD(&isci_device->node); domain_dev->lldd_dev = isci_device; isci_device->domain_dev = domain_dev; isci_device->isci_port = isci_port; isci_remote_device_change_state(isci_device, isci_starting); spin_lock_irq(&isci_host->scic_lock); list_add_tail(&isci_device->node, &isci_port->remote_dev_list); set_bit(IDEV_START_PENDING, &isci_device->flags); status = isci_remote_device_construct(isci_port, isci_device); spin_unlock_irq(&isci_host->scic_lock); dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p\n", __func__, isci_device); if (status != SCI_SUCCESS) { spin_lock_irq(&isci_host->scic_lock); isci_remote_device_deconstruct( isci_host, isci_device ); spin_unlock_irq(&isci_host->scic_lock); return -ENODEV; } /* wait for the device ready callback. */ wait_for_device_start(isci_host, isci_device); return 0; } /** * isci_device_is_reset_pending() - This function will check if there is any * pending reset condition on the device. * @request: This parameter is the isci_device object. * * true if there is a reset pending for the device. */ bool isci_device_is_reset_pending( struct isci_host *isci_host, struct isci_remote_device *isci_device) { struct isci_request *isci_request; struct isci_request *tmp_req; bool reset_is_pending = false; unsigned long flags; dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p\n", __func__, isci_device); spin_lock_irqsave(&isci_host->scic_lock, flags); /* Check for reset on all pending requests. */ list_for_each_entry_safe(isci_request, tmp_req, &isci_device->reqs_in_process, dev_node) { dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p request = %p\n", __func__, isci_device, isci_request); if (isci_request->ttype == io_task) { struct sas_task *task = isci_request_access_task( isci_request); spin_lock(&task->task_state_lock); if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) reset_is_pending = true; spin_unlock(&task->task_state_lock); } } spin_unlock_irqrestore(&isci_host->scic_lock, flags); dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p reset_is_pending = %d\n", __func__, isci_device, reset_is_pending); return reset_is_pending; } /** * isci_device_clear_reset_pending() - This function will clear if any pending * reset condition flags on the device. * @request: This parameter is the isci_device object. * * true if there is a reset pending for the device. */ void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev) { struct isci_request *isci_request; struct isci_request *tmp_req; unsigned long flags = 0; dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n", __func__, idev, ihost); spin_lock_irqsave(&ihost->scic_lock, flags); /* Clear reset pending on all pending requests. */ list_for_each_entry_safe(isci_request, tmp_req, &idev->reqs_in_process, dev_node) { dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n", __func__, idev, isci_request); if (isci_request->ttype == io_task) { unsigned long flags2; struct sas_task *task = isci_request_access_task( isci_request); spin_lock_irqsave(&task->task_state_lock, flags2); task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; spin_unlock_irqrestore(&task->task_state_lock, flags2); } } spin_unlock_irqrestore(&ihost->scic_lock, flags); }