/* * Scsi Host Layer for MPT (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * NO WARRANTY * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is * solely responsible for determining the appropriateness of using and * distributing the Program and assumes all risks associated with its * exercise of rights under this Agreement, including but not limited to * the risks and costs of program errors, damage to or loss of data, * programs or equipment, and unavailability or interruption of operations. * DISCLAIMER OF LIABILITY * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, * USA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mpt2sas_base.h" MODULE_AUTHOR(MPT2SAS_AUTHOR); MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION); MODULE_LICENSE("GPL"); MODULE_VERSION(MPT2SAS_DRIVER_VERSION); #define RAID_CHANNEL 1 /* forward proto's */ static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_expander); static void _firmware_event_work(struct work_struct *work); static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid); static void _scsih_scan_start(struct Scsi_Host *shost); static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time); /* global parameters */ LIST_HEAD(mpt2sas_ioc_list); /* local parameters */ static u8 scsi_io_cb_idx = -1; static u8 tm_cb_idx = -1; static u8 ctl_cb_idx = -1; static u8 base_cb_idx = -1; static u8 port_enable_cb_idx = -1; static u8 transport_cb_idx = -1; static u8 scsih_cb_idx = -1; static u8 config_cb_idx = -1; static int mpt_ids; static u8 tm_tr_cb_idx = -1 ; static u8 tm_tr_volume_cb_idx = -1 ; static u8 tm_sas_control_cb_idx = -1; /* command line options */ static u32 logging_level; MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info " "(default=0)"); static ushort max_sectors = 0xFFFF; module_param(max_sectors, ushort, 0); MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 8192 default=8192"); /* scsi-mid layer global parmeter is max_report_luns, which is 511 */ #define MPT2SAS_MAX_LUN (16895) static int max_lun = MPT2SAS_MAX_LUN; module_param(max_lun, int, 0); MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); /* diag_buffer_enable is bitwise * bit 0 set = TRACE * bit 1 set = SNAPSHOT * bit 2 set = EXTENDED * * Either bit can be set, or both */ static int diag_buffer_enable = -1; module_param(diag_buffer_enable, int, 0); MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers " "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)"); /** * struct sense_info - common structure for obtaining sense keys * @skey: sense key * @asc: additional sense code * @ascq: additional sense code qualifier */ struct sense_info { u8 skey; u8 asc; u8 ascq; }; #define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC) #define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD) #define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF) /** * struct fw_event_work - firmware event struct * @list: link list framework * @work: work object (ioc->fault_reset_work_q) * @cancel_pending_work: flag set during reset handling * @ioc: per adapter object * @device_handle: device handle * @VF_ID: virtual function id * @VP_ID: virtual port id * @ignore: flag meaning this event has been marked to ignore * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h * @event_data: reply event data payload follows * * This object stored on ioc->fw_event_list. */ struct fw_event_work { struct list_head list; u8 cancel_pending_work; struct delayed_work delayed_work; struct MPT2SAS_ADAPTER *ioc; u16 device_handle; u8 VF_ID; u8 VP_ID; u8 ignore; u16 event; void *event_data; }; /* raid transport support */ static struct raid_template *mpt2sas_raid_template; /** * struct _scsi_io_transfer - scsi io transfer * @handle: sas device handle (assigned by firmware) * @is_raid: flag set for hidden raid components * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE, * @data_length: data transfer length * @data_dma: dma pointer to data * @sense: sense data * @lun: lun number * @cdb_length: cdb length * @cdb: cdb contents * @timeout: timeout for this command * @VF_ID: virtual function id * @VP_ID: virtual port id * @valid_reply: flag set for reply message * @sense_length: sense length * @ioc_status: ioc status * @scsi_state: scsi state * @scsi_status: scsi staus * @log_info: log information * @transfer_length: data length transfer when there is a reply message * * Used for sending internal scsi commands to devices within this module. * Refer to _scsi_send_scsi_io(). */ struct _scsi_io_transfer { u16 handle; u8 is_raid; enum dma_data_direction dir; u32 data_length; dma_addr_t data_dma; u8 sense[SCSI_SENSE_BUFFERSIZE]; u32 lun; u8 cdb_length; u8 cdb[32]; u8 timeout; u8 VF_ID; u8 VP_ID; u8 valid_reply; /* the following bits are only valid when 'valid_reply = 1' */ u32 sense_length; u16 ioc_status; u8 scsi_state; u8 scsi_status; u32 log_info; u32 transfer_length; }; /* * The pci device ids are defined in mpi/mpi2_cnfg.h. */ static struct pci_device_id scsih_pci_table[] = { { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004, PCI_ANY_ID, PCI_ANY_ID }, /* Falcon ~ 2008*/ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008, PCI_ANY_ID, PCI_ANY_ID }, /* Liberator ~ 2108 */ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3, PCI_ANY_ID, PCI_ANY_ID }, /* Meteor ~ 2116 */ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2, PCI_ANY_ID, PCI_ANY_ID }, /* Thunderbolt ~ 2208 */ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6, PCI_ANY_ID, PCI_ANY_ID }, /* Mustang ~ 2308 */ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2, PCI_ANY_ID, PCI_ANY_ID }, { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3, PCI_ANY_ID, PCI_ANY_ID }, /* SSS6200 */ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200, PCI_ANY_ID, PCI_ANY_ID }, {0} /* Terminating entry */ }; MODULE_DEVICE_TABLE(pci, scsih_pci_table); /** * _scsih_set_debug_level - global setting of ioc->logging_level. * * Note: The logging levels are defined in mpt2sas_debug.h. */ static int _scsih_set_debug_level(const char *val, struct kernel_param *kp) { int ret = param_set_int(val, kp); struct MPT2SAS_ADAPTER *ioc; if (ret) return ret; printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level); list_for_each_entry(ioc, &mpt2sas_ioc_list, list) ioc->logging_level = logging_level; return 0; } module_param_call(logging_level, _scsih_set_debug_level, param_get_int, &logging_level, 0644); /** * _scsih_srch_boot_sas_address - search based on sas_address * @sas_address: sas address * @boot_device: boot device object from bios page 2 * * Returns 1 when there's a match, 0 means no match. */ static inline int _scsih_srch_boot_sas_address(u64 sas_address, Mpi2BootDeviceSasWwid_t *boot_device) { return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0; } /** * _scsih_srch_boot_device_name - search based on device name * @device_name: device name specified in INDENTIFY fram * @boot_device: boot device object from bios page 2 * * Returns 1 when there's a match, 0 means no match. */ static inline int _scsih_srch_boot_device_name(u64 device_name, Mpi2BootDeviceDeviceName_t *boot_device) { return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0; } /** * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot * @enclosure_logical_id: enclosure logical id * @slot_number: slot number * @boot_device: boot device object from bios page 2 * * Returns 1 when there's a match, 0 means no match. */ static inline int _scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number, Mpi2BootDeviceEnclosureSlot_t *boot_device) { return (enclosure_logical_id == le64_to_cpu(boot_device-> EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device-> SlotNumber)) ? 1 : 0; } /** * _scsih_is_boot_device - search for matching boot device. * @sas_address: sas address * @device_name: device name specified in INDENTIFY fram * @enclosure_logical_id: enclosure logical id * @slot_number: slot number * @form: specifies boot device form * @boot_device: boot device object from bios page 2 * * Returns 1 when there's a match, 0 means no match. */ static int _scsih_is_boot_device(u64 sas_address, u64 device_name, u64 enclosure_logical_id, u16 slot, u8 form, Mpi2BiosPage2BootDevice_t *boot_device) { int rc = 0; switch (form) { case MPI2_BIOSPAGE2_FORM_SAS_WWID: if (!sas_address) break; rc = _scsih_srch_boot_sas_address( sas_address, &boot_device->SasWwid); break; case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT: if (!enclosure_logical_id) break; rc = _scsih_srch_boot_encl_slot( enclosure_logical_id, slot, &boot_device->EnclosureSlot); break; case MPI2_BIOSPAGE2_FORM_DEVICE_NAME: if (!device_name) break; rc = _scsih_srch_boot_device_name( device_name, &boot_device->DeviceName); break; case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED: break; } return rc; } /** * _scsih_get_sas_address - set the sas_address for given device handle * @handle: device handle * @sas_address: sas address * * Returns 0 success, non-zero when failure */ static int _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle, u64 *sas_address) { Mpi2SasDevicePage0_t sas_device_pg0; Mpi2ConfigReply_t mpi_reply; u32 ioc_status; *sas_address = 0; if (handle <= ioc->sas_hba.num_phys) { *sas_address = ioc->sas_hba.sas_address; return 0; } if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -ENXIO; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { *sas_address = le64_to_cpu(sas_device_pg0.SASAddress); return 0; } /* we hit this becuase the given parent handle doesn't exist */ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) return -ENXIO; /* else error case */ printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), " "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status, __FILE__, __LINE__, __func__); return -EIO; } /** * _scsih_determine_boot_device - determine boot device. * @ioc: per adapter object * @device: either sas_device or raid_device object * @is_raid: [flag] 1 = raid object, 0 = sas object * * Determines whether this device should be first reported device to * to scsi-ml or sas transport, this purpose is for persistent boot device. * There are primary, alternate, and current entries in bios page 2. The order * priority is primary, alternate, then current. This routine saves * the corresponding device object and is_raid flag in the ioc object. * The saved data to be used later in _scsih_probe_boot_devices(). */ static void _scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc, void *device, u8 is_raid) { struct _sas_device *sas_device; struct _raid_device *raid_device; u64 sas_address; u64 device_name; u64 enclosure_logical_id; u16 slot; /* only process this function when driver loads */ if (!ioc->is_driver_loading) return; /* no Bios, return immediately */ if (!ioc->bios_pg3.BiosVersion) return; if (!is_raid) { sas_device = device; sas_address = sas_device->sas_address; device_name = sas_device->device_name; enclosure_logical_id = sas_device->enclosure_logical_id; slot = sas_device->slot; } else { raid_device = device; sas_address = raid_device->wwid; device_name = 0; enclosure_logical_id = 0; slot = 0; } if (!ioc->req_boot_device.device) { if (_scsih_is_boot_device(sas_address, device_name, enclosure_logical_id, slot, (ioc->bios_pg2.ReqBootDeviceForm & MPI2_BIOSPAGE2_FORM_MASK), &ioc->bios_pg2.RequestedBootDevice)) { dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: req_boot_device(0x%016llx)\n", ioc->name, __func__, (unsigned long long)sas_address)); ioc->req_boot_device.device = device; ioc->req_boot_device.is_raid = is_raid; } } if (!ioc->req_alt_boot_device.device) { if (_scsih_is_boot_device(sas_address, device_name, enclosure_logical_id, slot, (ioc->bios_pg2.ReqAltBootDeviceForm & MPI2_BIOSPAGE2_FORM_MASK), &ioc->bios_pg2.RequestedAltBootDevice)) { dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: req_alt_boot_device(0x%016llx)\n", ioc->name, __func__, (unsigned long long)sas_address)); ioc->req_alt_boot_device.device = device; ioc->req_alt_boot_device.is_raid = is_raid; } } if (!ioc->current_boot_device.device) { if (_scsih_is_boot_device(sas_address, device_name, enclosure_logical_id, slot, (ioc->bios_pg2.CurrentBootDeviceForm & MPI2_BIOSPAGE2_FORM_MASK), &ioc->bios_pg2.CurrentBootDevice)) { dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: current_boot_device(0x%016llx)\n", ioc->name, __func__, (unsigned long long)sas_address)); ioc->current_boot_device.device = device; ioc->current_boot_device.is_raid = is_raid; } } } /** * mpt2sas_scsih_sas_device_find_by_sas_address - sas device search * @ioc: per adapter object * @sas_address: sas address * Context: Calling function should acquire ioc->sas_device_lock * * This searches for sas_device based on sas_address, then return sas_device * object. */ struct _sas_device * mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) { struct _sas_device *sas_device; list_for_each_entry(sas_device, &ioc->sas_device_list, list) if (sas_device->sas_address == sas_address) return sas_device; list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) if (sas_device->sas_address == sas_address) return sas_device; return NULL; } /** * _scsih_sas_device_find_by_handle - sas device search * @ioc: per adapter object * @handle: sas device handle (assigned by firmware) * Context: Calling function should acquire ioc->sas_device_lock * * This searches for sas_device based on sas_address, then return sas_device * object. */ static struct _sas_device * _scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct _sas_device *sas_device; list_for_each_entry(sas_device, &ioc->sas_device_list, list) if (sas_device->handle == handle) return sas_device; list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) if (sas_device->handle == handle) return sas_device; return NULL; } /** * _scsih_sas_device_remove - remove sas_device from list. * @ioc: per adapter object * @sas_device: the sas_device object * Context: This function will acquire ioc->sas_device_lock. * * Removing object and freeing associated memory from the ioc->sas_device_list. */ static void _scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc, struct _sas_device *sas_device) { unsigned long flags; if (!sas_device) return; spin_lock_irqsave(&ioc->sas_device_lock, flags); if (mpt2sas_scsih_sas_device_find_by_sas_address(ioc, sas_device->sas_address)) { list_del(&sas_device->list); kfree(sas_device); } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } /** * _scsih_sas_device_add - insert sas_device to the list. * @ioc: per adapter object * @sas_device: the sas_device object * Context: This function will acquire ioc->sas_device_lock. * * Adding new object to the ioc->sas_device_list. */ static void _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, struct _sas_device *sas_device) { unsigned long flags; dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, sas_device->handle, (unsigned long long)sas_device->sas_address)); spin_lock_irqsave(&ioc->sas_device_lock, flags); list_add_tail(&sas_device->list, &ioc->sas_device_list); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (!mpt2sas_transport_port_add(ioc, sas_device->handle, sas_device->sas_address_parent)) _scsih_sas_device_remove(ioc, sas_device); } /** * _scsih_sas_device_init_add - insert sas_device to the list. * @ioc: per adapter object * @sas_device: the sas_device object * Context: This function will acquire ioc->sas_device_lock. * * Adding new object at driver load time to the ioc->sas_device_init_list. */ static void _scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc, struct _sas_device *sas_device) { unsigned long flags; dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, sas_device->handle, (unsigned long long)sas_device->sas_address)); spin_lock_irqsave(&ioc->sas_device_lock, flags); list_add_tail(&sas_device->list, &ioc->sas_device_init_list); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); _scsih_determine_boot_device(ioc, sas_device, 0); } /** * _scsih_raid_device_find_by_id - raid device search * @ioc: per adapter object * @id: sas device target id * @channel: sas device channel * Context: Calling function should acquire ioc->raid_device_lock * * This searches for raid_device based on target id, then return raid_device * object. */ static struct _raid_device * _scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel) { struct _raid_device *raid_device, *r; r = NULL; list_for_each_entry(raid_device, &ioc->raid_device_list, list) { if (raid_device->id == id && raid_device->channel == channel) { r = raid_device; goto out; } } out: return r; } /** * _scsih_raid_device_find_by_handle - raid device search * @ioc: per adapter object * @handle: sas device handle (assigned by firmware) * Context: Calling function should acquire ioc->raid_device_lock * * This searches for raid_device based on handle, then return raid_device * object. */ static struct _raid_device * _scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct _raid_device *raid_device, *r; r = NULL; list_for_each_entry(raid_device, &ioc->raid_device_list, list) { if (raid_device->handle != handle) continue; r = raid_device; goto out; } out: return r; } /** * _scsih_raid_device_find_by_wwid - raid device search * @ioc: per adapter object * @handle: sas device handle (assigned by firmware) * Context: Calling function should acquire ioc->raid_device_lock * * This searches for raid_device based on wwid, then return raid_device * object. */ static struct _raid_device * _scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid) { struct _raid_device *raid_device, *r; r = NULL; list_for_each_entry(raid_device, &ioc->raid_device_list, list) { if (raid_device->wwid != wwid) continue; r = raid_device; goto out; } out: return r; } /** * _scsih_raid_device_add - add raid_device object * @ioc: per adapter object * @raid_device: raid_device object * * This is added to the raid_device_list link list. */ static void _scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc, struct _raid_device *raid_device) { unsigned long flags; dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__, raid_device->handle, (unsigned long long)raid_device->wwid)); spin_lock_irqsave(&ioc->raid_device_lock, flags); list_add_tail(&raid_device->list, &ioc->raid_device_list); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); } /** * _scsih_raid_device_remove - delete raid_device object * @ioc: per adapter object * @raid_device: raid_device object * * This is removed from the raid_device_list link list. */ static void _scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc, struct _raid_device *raid_device) { unsigned long flags; spin_lock_irqsave(&ioc->raid_device_lock, flags); list_del(&raid_device->list); memset(raid_device, 0, sizeof(struct _raid_device)); kfree(raid_device); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); } /** * mpt2sas_scsih_expander_find_by_handle - expander device search * @ioc: per adapter object * @handle: expander handle (assigned by firmware) * Context: Calling function should acquire ioc->sas_device_lock * * This searches for expander device based on handle, then returns the * sas_node object. */ struct _sas_node * mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct _sas_node *sas_expander, *r; r = NULL; list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { if (sas_expander->handle != handle) continue; r = sas_expander; goto out; } out: return r; } /** * mpt2sas_scsih_expander_find_by_sas_address - expander device search * @ioc: per adapter object * @sas_address: sas address * Context: Calling function should acquire ioc->sas_node_lock. * * This searches for expander device based on sas_address, then returns the * sas_node object. */ struct _sas_node * mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) { struct _sas_node *sas_expander, *r; r = NULL; list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { if (sas_expander->sas_address != sas_address) continue; r = sas_expander; goto out; } out: return r; } /** * _scsih_expander_node_add - insert expander device to the list. * @ioc: per adapter object * @sas_expander: the sas_device object * Context: This function will acquire ioc->sas_node_lock. * * Adding new object to the ioc->sas_expander_list. * * Return nothing. */ static void _scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_expander) { unsigned long flags; spin_lock_irqsave(&ioc->sas_node_lock, flags); list_add_tail(&sas_expander->list, &ioc->sas_expander_list); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); } /** * _scsih_is_end_device - determines if device is an end device * @device_info: bitfield providing information about the device. * Context: none * * Returns 1 if end device. */ static int _scsih_is_end_device(u32 device_info) { if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE && ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) | (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) | (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE))) return 1; else return 0; } /** * _scsih_scsi_lookup_get - returns scmd entry * @ioc: per adapter object * @smid: system request message index * * Returns the smid stored scmd pointer. */ static struct scsi_cmnd * _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) { return ioc->scsi_lookup[smid - 1].scmd; } /** * _scsih_scsi_lookup_get_clear - returns scmd entry * @ioc: per adapter object * @smid: system request message index * * Returns the smid stored scmd pointer. * Then will derefrence the stored scmd pointer. */ static inline struct scsi_cmnd * _scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid) { unsigned long flags; struct scsi_cmnd *scmd; spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); scmd = ioc->scsi_lookup[smid - 1].scmd; ioc->scsi_lookup[smid - 1].scmd = NULL; spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); return scmd; } /** * _scsih_scsi_lookup_find_by_scmd - scmd lookup * @ioc: per adapter object * @smid: system request message index * @scmd: pointer to scsi command object * Context: This function will acquire ioc->scsi_lookup_lock. * * This will search for a scmd pointer in the scsi_lookup array, * returning the revelent smid. A returned value of zero means invalid. */ static u16 _scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd) { u16 smid; unsigned long flags; int i; spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); smid = 0; for (i = 0; i < ioc->scsiio_depth; i++) { if (ioc->scsi_lookup[i].scmd == scmd) { smid = ioc->scsi_lookup[i].smid; goto out; } } out: spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); return smid; } /** * _scsih_scsi_lookup_find_by_target - search for matching channel:id * @ioc: per adapter object * @id: target id * @channel: channel * Context: This function will acquire ioc->scsi_lookup_lock. * * This will search for a matching channel:id in the scsi_lookup array, * returning 1 if found. */ static u8 _scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id, int channel) { u8 found; unsigned long flags; int i; spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); found = 0; for (i = 0 ; i < ioc->scsiio_depth; i++) { if (ioc->scsi_lookup[i].scmd && (ioc->scsi_lookup[i].scmd->device->id == id && ioc->scsi_lookup[i].scmd->device->channel == channel)) { found = 1; goto out; } } out: spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); return found; } /** * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun * @ioc: per adapter object * @id: target id * @lun: lun number * @channel: channel * Context: This function will acquire ioc->scsi_lookup_lock. * * This will search for a matching channel:id:lun in the scsi_lookup array, * returning 1 if found. */ static u8 _scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id, unsigned int lun, int channel) { u8 found; unsigned long flags; int i; spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); found = 0; for (i = 0 ; i < ioc->scsiio_depth; i++) { if (ioc->scsi_lookup[i].scmd && (ioc->scsi_lookup[i].scmd->device->id == id && ioc->scsi_lookup[i].scmd->device->channel == channel && ioc->scsi_lookup[i].scmd->device->lun == lun)) { found = 1; goto out; } } out: spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); return found; } /** * _scsih_get_chain_buffer_tracker - obtain chain tracker * @ioc: per adapter object * @smid: smid associated to an IO request * * Returns chain tracker(from ioc->free_chain_list) */ static struct chain_tracker * _scsih_get_chain_buffer_tracker(struct MPT2SAS_ADAPTER *ioc, u16 smid) { struct chain_tracker *chain_req; unsigned long flags; spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); if (list_empty(&ioc->free_chain_list)) { spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); printk(MPT2SAS_WARN_FMT "chain buffers not available\n", ioc->name); return NULL; } chain_req = list_entry(ioc->free_chain_list.next, struct chain_tracker, tracker_list); list_del_init(&chain_req->tracker_list); list_add_tail(&chain_req->tracker_list, &ioc->scsi_lookup[smid - 1].chain_list); spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); return chain_req; } /** * _scsih_build_scatter_gather - main sg creation routine * @ioc: per adapter object * @scmd: scsi command * @smid: system request message index * Context: none. * * The main routine that builds scatter gather table from a given * scsi request sent via the .queuecommand main handler. * * Returns 0 success, anything else error */ static int _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, u16 smid) { Mpi2SCSIIORequest_t *mpi_request; dma_addr_t chain_dma; struct scatterlist *sg_scmd; void *sg_local, *chain; u32 chain_offset; u32 chain_length; u32 chain_flags; int sges_left; u32 sges_in_segment; u32 sgl_flags; u32 sgl_flags_last_element; u32 sgl_flags_end_buffer; struct chain_tracker *chain_req; mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); /* init scatter gather flags */ sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT; if (scmd->sc_data_direction == DMA_TO_DEVICE) sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC; sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT) << MPI2_SGE_FLAGS_SHIFT; sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT; sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; sg_scmd = scsi_sglist(scmd); sges_left = scsi_dma_map(scmd); if (sges_left < 0) { sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" " failed: request for %d bytes!\n", scsi_bufflen(scmd)); return -ENOMEM; } sg_local = &mpi_request->SGL; sges_in_segment = ioc->max_sges_in_main_message; if (sges_left <= sges_in_segment) goto fill_in_last_segment; mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) + (sges_in_segment * ioc->sge_size))/4; /* fill in main message segment when there is a chain following */ while (sges_in_segment) { if (sges_in_segment == 1) ioc->base_add_sg_single(sg_local, sgl_flags_last_element | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); else ioc->base_add_sg_single(sg_local, sgl_flags | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); sg_scmd = sg_next(sg_scmd); sg_local += ioc->sge_size; sges_left--; sges_in_segment--; } /* initializing the chain flags and pointers */ chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; chain_req = _scsih_get_chain_buffer_tracker(ioc, smid); if (!chain_req) return -1; chain = chain_req->chain_buffer; chain_dma = chain_req->chain_buffer_dma; do { sges_in_segment = (sges_left <= ioc->max_sges_in_chain_message) ? sges_left : ioc->max_sges_in_chain_message; chain_offset = (sges_left == sges_in_segment) ? 0 : (sges_in_segment * ioc->sge_size)/4; chain_length = sges_in_segment * ioc->sge_size; if (chain_offset) { chain_offset = chain_offset << MPI2_SGE_CHAIN_OFFSET_SHIFT; chain_length += ioc->sge_size; } ioc->base_add_sg_single(sg_local, chain_flags | chain_offset | chain_length, chain_dma); sg_local = chain; if (!chain_offset) goto fill_in_last_segment; /* fill in chain segments */ while (sges_in_segment) { if (sges_in_segment == 1) ioc->base_add_sg_single(sg_local, sgl_flags_last_element | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); else ioc->base_add_sg_single(sg_local, sgl_flags | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); sg_scmd = sg_next(sg_scmd); sg_local += ioc->sge_size; sges_left--; sges_in_segment--; } chain_req = _scsih_get_chain_buffer_tracker(ioc, smid); if (!chain_req) return -1; chain = chain_req->chain_buffer; chain_dma = chain_req->chain_buffer_dma; } while (1); fill_in_last_segment: /* fill the last segment */ while (sges_left) { if (sges_left == 1) ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); else ioc->base_add_sg_single(sg_local, sgl_flags | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); sg_scmd = sg_next(sg_scmd); sg_local += ioc->sge_size; sges_left--; } return 0; } /** * _scsih_adjust_queue_depth - setting device queue depth * @sdev: scsi device struct * @qdepth: requested queue depth * * * Returns nothing */ static void _scsih_adjust_queue_depth(struct scsi_device *sdev, int qdepth) { struct Scsi_Host *shost = sdev->host; int max_depth; struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); struct MPT2SAS_DEVICE *sas_device_priv_data; struct MPT2SAS_TARGET *sas_target_priv_data; struct _sas_device *sas_device; unsigned long flags; max_depth = shost->can_queue; /* limit max device queue for SATA to 32 */ sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data) goto not_sata; sas_target_priv_data = sas_device_priv_data->sas_target; if (!sas_target_priv_data) goto not_sata; if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) goto not_sata; spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, sas_device_priv_data->sas_target->sas_address); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (sas_device && sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) max_depth = MPT2SAS_SATA_QUEUE_DEPTH; not_sata: if (!sdev->tagged_supported) max_depth = 1; if (qdepth > max_depth) qdepth = max_depth; scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); } /** * _scsih_change_queue_depth - setting device queue depth * @sdev: scsi device struct * @qdepth: requested queue depth * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP * (see include/scsi/scsi_host.h for definition) * * Returns queue depth. */ static int _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) { if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP) _scsih_adjust_queue_depth(sdev, qdepth); else if (reason == SCSI_QDEPTH_QFULL) scsi_track_queue_full(sdev, qdepth); else return -EOPNOTSUPP; if (sdev->inquiry_len > 7) sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n", sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags, sdev->ordered_tags, sdev->scsi_level, (sdev->inquiry[7] & 2) >> 1); return sdev->queue_depth; } /** * _scsih_change_queue_type - changing device queue tag type * @sdev: scsi device struct * @tag_type: requested tag type * * Returns queue tag type. */ static int _scsih_change_queue_type(struct scsi_device *sdev, int tag_type) { if (sdev->tagged_supported) { scsi_set_tag_type(sdev, tag_type); if (tag_type) scsi_activate_tcq(sdev, sdev->queue_depth); else scsi_deactivate_tcq(sdev, sdev->queue_depth); } else tag_type = 0; return tag_type; } /** * _scsih_target_alloc - target add routine * @starget: scsi target struct * * Returns 0 if ok. Any other return is assumed to be an error and * the device is ignored. */ static int _scsih_target_alloc(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(&starget->dev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); struct MPT2SAS_TARGET *sas_target_priv_data; struct _sas_device *sas_device; struct _raid_device *raid_device; unsigned long flags; struct sas_rphy *rphy; sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL); if (!sas_target_priv_data) return -ENOMEM; starget->hostdata = sas_target_priv_data; sas_target_priv_data->starget = starget; sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE; /* RAID volumes */ if (starget->channel == RAID_CHANNEL) { spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, starget->channel); if (raid_device) { sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; sas_target_priv_data->raid_device = raid_device; raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; } /* sas/sata devices */ spin_lock_irqsave(&ioc->sas_device_lock, flags); rphy = dev_to_rphy(starget->dev.parent); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, rphy->identify.sas_address); if (sas_device) { sas_target_priv_data->handle = sas_device->handle; sas_target_priv_data->sas_address = sas_device->sas_address; sas_device->starget = starget; sas_device->id = starget->id; sas_device->channel = starget->channel; if (test_bit(sas_device->handle, ioc->pd_handles)) sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT; } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); return 0; } /** * _scsih_target_destroy - target destroy routine * @starget: scsi target struct * * Returns nothing. */ static void _scsih_target_destroy(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(&starget->dev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); struct MPT2SAS_TARGET *sas_target_priv_data; struct _sas_device *sas_device; struct _raid_device *raid_device; unsigned long flags; struct sas_rphy *rphy; sas_target_priv_data = starget->hostdata; if (!sas_target_priv_data) return; if (starget->channel == RAID_CHANNEL) { spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, starget->channel); if (raid_device) { raid_device->starget = NULL; raid_device->sdev = NULL; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); goto out; } spin_lock_irqsave(&ioc->sas_device_lock, flags); rphy = dev_to_rphy(starget->dev.parent); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, rphy->identify.sas_address); if (sas_device && (sas_device->starget == starget) && (sas_device->id == starget->id) && (sas_device->channel == starget->channel)) sas_device->starget = NULL; spin_unlock_irqrestore(&ioc->sas_device_lock, flags); out: kfree(sas_target_priv_data); starget->hostdata = NULL; } /** * _scsih_slave_alloc - device add routine * @sdev: scsi device struct * * Returns 0 if ok. Any other return is assumed to be an error and * the device is ignored. */ static int _scsih_slave_alloc(struct scsi_device *sdev) { struct Scsi_Host *shost; struct MPT2SAS_ADAPTER *ioc; struct MPT2SAS_TARGET *sas_target_priv_data; struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_target *starget; struct _raid_device *raid_device; unsigned long flags; sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); if (!sas_device_priv_data) return -ENOMEM; sas_device_priv_data->lun = sdev->lun; sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT; starget = scsi_target(sdev); sas_target_priv_data = starget->hostdata; sas_target_priv_data->num_luns++; sas_device_priv_data->sas_target = sas_target_priv_data; sdev->hostdata = sas_device_priv_data; if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT)) sdev->no_uld_attach = 1; shost = dev_to_shost(&starget->dev); ioc = shost_priv(shost); if (starget->channel == RAID_CHANNEL) { spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, starget->channel); if (raid_device) raid_device->sdev = sdev; /* raid is single lun */ spin_unlock_irqrestore(&ioc->raid_device_lock, flags); } return 0; } /** * _scsih_slave_destroy - device destroy routine * @sdev: scsi device struct * * Returns nothing. */ static void _scsih_slave_destroy(struct scsi_device *sdev) { struct MPT2SAS_TARGET *sas_target_priv_data; struct scsi_target *starget; if (!sdev->hostdata) return; starget = scsi_target(sdev); sas_target_priv_data = starget->hostdata; sas_target_priv_data->num_luns--; kfree(sdev->hostdata); sdev->hostdata = NULL; } /** * _scsih_display_sata_capabilities - sata capabilities * @ioc: per adapter object * @sas_device: the sas_device object * @sdev: scsi device struct */ static void _scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc, struct _sas_device *sas_device, struct scsi_device *sdev) { Mpi2ConfigReply_t mpi_reply; Mpi2SasDevicePage0_t sas_device_pg0; u32 ioc_status; u16 flags; u32 device_info; if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, sas_device->handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } flags = le16_to_cpu(sas_device_pg0.Flags); device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); sdev_printk(KERN_INFO, sdev, "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), " "sw_preserve(%s)\n", (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n", (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n", (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" : "n", (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n", (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n", (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n"); } /** * _scsih_is_raid - return boolean indicating device is raid volume * @dev the device struct object */ static int _scsih_is_raid(struct device *dev) { struct scsi_device *sdev = to_scsi_device(dev); struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host); if (ioc->is_warpdrive) return 0; return (sdev->channel == RAID_CHANNEL) ? 1 : 0; } /** * _scsih_get_resync - get raid volume resync percent complete * @dev the device struct object */ static void _scsih_get_resync(struct device *dev) { struct scsi_device *sdev = to_scsi_device(dev); struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host); static struct _raid_device *raid_device; unsigned long flags; Mpi2RaidVolPage0_t vol_pg0; Mpi2ConfigReply_t mpi_reply; u32 volume_status_flags; u8 percent_complete = 0; spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, sdev->channel); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (!raid_device || ioc->is_warpdrive) goto out; if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sizeof(Mpi2RaidVolPage0_t))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags); if (volume_status_flags & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) percent_complete = raid_device->percent_complete; out: raid_set_resync(mpt2sas_raid_template, dev, percent_complete); } /** * _scsih_get_state - get raid volume level * @dev the device struct object */ static void _scsih_get_state(struct device *dev) { struct scsi_device *sdev = to_scsi_device(dev); struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host); static struct _raid_device *raid_device; unsigned long flags; Mpi2RaidVolPage0_t vol_pg0; Mpi2ConfigReply_t mpi_reply; u32 volstate; enum raid_state state = RAID_STATE_UNKNOWN; spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, sdev->channel); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (!raid_device) goto out; if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sizeof(Mpi2RaidVolPage0_t))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags); if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) { state = RAID_STATE_RESYNCING; goto out; } switch (vol_pg0.VolumeState) { case MPI2_RAID_VOL_STATE_OPTIMAL: case MPI2_RAID_VOL_STATE_ONLINE: state = RAID_STATE_ACTIVE; break; case MPI2_RAID_VOL_STATE_DEGRADED: state = RAID_STATE_DEGRADED; break; case MPI2_RAID_VOL_STATE_FAILED: case MPI2_RAID_VOL_STATE_MISSING: state = RAID_STATE_OFFLINE; break; } out: raid_set_state(mpt2sas_raid_template, dev, state); } /** * _scsih_set_level - set raid level * @sdev: scsi device struct * @raid_device: raid_device object */ static void _scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device) { enum raid_level level = RAID_LEVEL_UNKNOWN; switch (raid_device->volume_type) { case MPI2_RAID_VOL_TYPE_RAID0: level = RAID_LEVEL_0; break; case MPI2_RAID_VOL_TYPE_RAID10: level = RAID_LEVEL_10; break; case MPI2_RAID_VOL_TYPE_RAID1E: level = RAID_LEVEL_1E; break; case MPI2_RAID_VOL_TYPE_RAID1: level = RAID_LEVEL_1; break; } raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level); } /** * _scsih_get_volume_capabilities - volume capabilities * @ioc: per adapter object * @sas_device: the raid_device object */ static void _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, struct _raid_device *raid_device) { Mpi2RaidVolPage0_t *vol_pg0; Mpi2RaidPhysDiskPage0_t pd_pg0; Mpi2SasDevicePage0_t sas_device_pg0; Mpi2ConfigReply_t mpi_reply; u16 sz; u8 num_pds; if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, &num_pds)) || !num_pds) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } raid_device->num_pds = num_pds; sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * sizeof(Mpi2RaidVol0PhysDisk_t)); vol_pg0 = kzalloc(sz, GFP_KERNEL); if (!vol_pg0) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); kfree(vol_pg0); return; } raid_device->volume_type = vol_pg0->VolumeType; /* figure out what the underlying devices are by * obtaining the device_info bits for the 1st device */ if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, vol_pg0->PhysDisk[0].PhysDiskNum))) { if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, le16_to_cpu(pd_pg0.DevHandle)))) { raid_device->device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); } } kfree(vol_pg0); } /** * _scsih_disable_ddio - Disable direct I/O for all the volumes * @ioc: per adapter object */ static void _scsih_disable_ddio(struct MPT2SAS_ADAPTER *ioc) { Mpi2RaidVolPage1_t vol_pg1; Mpi2ConfigReply_t mpi_reply; struct _raid_device *raid_device; u16 handle; u16 ioc_status; handle = 0xFFFF; while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; handle = le16_to_cpu(vol_pg1.DevHandle); raid_device = _scsih_raid_device_find_by_handle(ioc, handle); if (raid_device) raid_device->direct_io_enabled = 0; } return; } /** * _scsih_get_num_volumes - Get number of volumes in the ioc * @ioc: per adapter object */ static u8 _scsih_get_num_volumes(struct MPT2SAS_ADAPTER *ioc) { Mpi2RaidVolPage1_t vol_pg1; Mpi2ConfigReply_t mpi_reply; u16 handle; u8 vol_cnt = 0; u16 ioc_status; handle = 0xFFFF; while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; vol_cnt++; handle = le16_to_cpu(vol_pg1.DevHandle); } return vol_cnt; } /** * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O. * @ioc: per adapter object * @raid_device: the raid_device object */ static void _scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc, struct _raid_device *raid_device) { Mpi2RaidVolPage0_t *vol_pg0; Mpi2RaidPhysDiskPage0_t pd_pg0; Mpi2ConfigReply_t mpi_reply; u16 sz; u8 num_pds, count; u64 mb = 1024 * 1024; u64 tb_2 = 2 * mb * mb; u64 capacity; u32 stripe_sz; u8 i, stripe_exp; if (!ioc->is_warpdrive) return; if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "globally as drives are exposed\n", ioc->name); return; } if (_scsih_get_num_volumes(ioc) > 1) { _scsih_disable_ddio(ioc); printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "globally as number of drives > 1\n", ioc->name); return; } if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, &num_pds)) || !num_pds) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "Failure in computing number of drives\n", ioc->name); return; } sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * sizeof(Mpi2RaidVol0PhysDisk_t)); vol_pg0 = kzalloc(sz, GFP_KERNEL); if (!vol_pg0) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "Memory allocation failure for RVPG0\n", ioc->name); return; } if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "Failure in retrieving RVPG0\n", ioc->name); kfree(vol_pg0); return; } /* * WARPDRIVE:If number of physical disks in a volume exceeds the max pds * assumed for WARPDRIVE, disable direct I/O */ if (num_pds > MPT_MAX_WARPDRIVE_PDS) { printk(MPT2SAS_WARN_FMT "WarpDrive : Direct IO is disabled " "for the drive with handle(0x%04x): num_mem=%d, " "max_mem_allowed=%d\n", ioc->name, raid_device->handle, num_pds, MPT_MAX_WARPDRIVE_PDS); kfree(vol_pg0); return; } for (count = 0; count < num_pds; count++) { if (mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, vol_pg0->PhysDisk[count].PhysDiskNum) || pd_pg0.DevHandle == MPT2SAS_INVALID_DEVICE_HANDLE) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is " "disabled for the drive with handle(0x%04x) member" "handle retrieval failed for member number=%d\n", ioc->name, raid_device->handle, vol_pg0->PhysDisk[count].PhysDiskNum); goto out_error; } raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle); } /* * Assumption for WD: Direct I/O is not supported if the volume is * not RAID0, if the stripe size is not 64KB, if the block size is * not 512 and if the volume size is >2TB */ if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0 || le16_to_cpu(vol_pg0->BlockSize) != 512) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "for the drive with handle(0x%04x): type=%d, " "s_sz=%uK, blk_size=%u\n", ioc->name, raid_device->handle, raid_device->volume_type, le32_to_cpu(vol_pg0->StripeSize)/2, le16_to_cpu(vol_pg0->BlockSize)); goto out_error; } capacity = (u64) le16_to_cpu(vol_pg0->BlockSize) * (le64_to_cpu(vol_pg0->MaxLBA) + 1); if (capacity > tb_2) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "for the drive with handle(0x%04x) since drive sz > 2TB\n", ioc->name, raid_device->handle); goto out_error; } stripe_sz = le32_to_cpu(vol_pg0->StripeSize); stripe_exp = 0; for (i = 0; i < 32; i++) { if (stripe_sz & 1) break; stripe_exp++; stripe_sz >>= 1; } if (i == 32) { printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " "for the drive with handle(0x%04x) invalid stripe sz %uK\n", ioc->name, raid_device->handle, le32_to_cpu(vol_pg0->StripeSize)/2); goto out_error; } raid_device->stripe_exponent = stripe_exp; raid_device->direct_io_enabled = 1; printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive" " with handle(0x%04x)\n", ioc->name, raid_device->handle); /* * WARPDRIVE: Though the following fields are not used for direct IO, * stored for future purpose: */ raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA); raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize); raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize); kfree(vol_pg0); return; out_error: raid_device->direct_io_enabled = 0; for (count = 0; count < num_pds; count++) raid_device->pd_handle[count] = 0; kfree(vol_pg0); return; } /** * _scsih_enable_tlr - setting TLR flags * @ioc: per adapter object * @sdev: scsi device struct * * Enabling Transaction Layer Retries for tape devices when * vpd page 0x90 is present * */ static void _scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev) { /* only for TAPE */ if (sdev->type != TYPE_TAPE) return; if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR)) return; sas_enable_tlr(sdev); sdev_printk(KERN_INFO, sdev, "TLR %s\n", sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled"); return; } /** * _scsih_slave_configure - device configure routine. * @sdev: scsi device struct * * Returns 0 if ok. Any other return is assumed to be an error and * the device is ignored. */ static int _scsih_slave_configure(struct scsi_device *sdev) { struct Scsi_Host *shost = sdev->host; struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); struct MPT2SAS_DEVICE *sas_device_priv_data; struct MPT2SAS_TARGET *sas_target_priv_data; struct _sas_device *sas_device; struct _raid_device *raid_device; unsigned long flags; int qdepth; u8 ssp_target = 0; char *ds = ""; char *r_level = ""; qdepth = 1; sas_device_priv_data = sdev->hostdata; sas_device_priv_data->configured_lun = 1; sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT; sas_target_priv_data = sas_device_priv_data->sas_target; /* raid volume handling */ if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) { spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_handle(ioc, sas_target_priv_data->handle); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (!raid_device) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return 0; } _scsih_get_volume_capabilities(ioc, raid_device); /* * WARPDRIVE: Initialize the required data for Direct IO */ _scsih_init_warpdrive_properties(ioc, raid_device); /* RAID Queue Depth Support * IS volume = underlying qdepth of drive type, either * MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH) */ if (raid_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { qdepth = MPT2SAS_SAS_QUEUE_DEPTH; ds = "SSP"; } else { qdepth = MPT2SAS_SATA_QUEUE_DEPTH; if (raid_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) ds = "SATA"; else ds = "STP"; } switch (raid_device->volume_type) { case MPI2_RAID_VOL_TYPE_RAID0: r_level = "RAID0"; break; case MPI2_RAID_VOL_TYPE_RAID1E: qdepth = MPT2SAS_RAID_QUEUE_DEPTH; if (ioc->manu_pg10.OEMIdentifier && (le32_to_cpu(ioc->manu_pg10.GenericFlags0) & MFG10_GF0_R10_DISPLAY) && !(raid_device->num_pds % 2)) r_level = "RAID10"; else r_level = "RAID1E"; break; case MPI2_RAID_VOL_TYPE_RAID1: qdepth = MPT2SAS_RAID_QUEUE_DEPTH; r_level = "RAID1"; break; case MPI2_RAID_VOL_TYPE_RAID10: qdepth = MPT2SAS_RAID_QUEUE_DEPTH; r_level = "RAID10"; break; case MPI2_RAID_VOL_TYPE_UNKNOWN: default: qdepth = MPT2SAS_RAID_QUEUE_DEPTH; r_level = "RAIDX"; break; } if (!ioc->hide_ir_msg) sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " "wwid(0x%016llx), pd_count(%d), type(%s)\n", r_level, raid_device->handle, (unsigned long long)raid_device->wwid, raid_device->num_pds, ds); _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); /* raid transport support */ if (!ioc->is_warpdrive) _scsih_set_level(sdev, raid_device); return 0; } /* non-raid handling */ spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, sas_device_priv_data->sas_target->sas_address); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (sas_device) { if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) { mpt2sas_config_get_volume_handle(ioc, sas_device->handle, &sas_device->volume_handle); mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle, &sas_device->volume_wwid); } if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { qdepth = MPT2SAS_SAS_QUEUE_DEPTH; ssp_target = 1; ds = "SSP"; } else { qdepth = MPT2SAS_SATA_QUEUE_DEPTH; if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) ds = "STP"; else if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) ds = "SATA"; } sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n", ds, sas_device->handle, (unsigned long long)sas_device->sas_address, sas_device->phy, (unsigned long long)sas_device->device_name); sdev_printk(KERN_INFO, sdev, "%s: " "enclosure_logical_id(0x%016llx), slot(%d)\n", ds, (unsigned long long) sas_device->enclosure_logical_id, sas_device->slot); if (!ssp_target) _scsih_display_sata_capabilities(ioc, sas_device, sdev); } _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); if (ssp_target) { sas_read_port_mode_page(sdev); _scsih_enable_tlr(ioc, sdev); } return 0; } /** * _scsih_bios_param - fetch head, sector, cylinder info for a disk * @sdev: scsi device struct * @bdev: pointer to block device context * @capacity: device size (in 512 byte sectors) * @params: three element array to place output: * params[0] number of heads (max 255) * params[1] number of sectors (max 63) * params[2] number of cylinders * * Return nothing. */ static int _scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int params[]) { int heads; int sectors; sector_t cylinders; ulong dummy; heads = 64; sectors = 32; dummy = heads * sectors; cylinders = capacity; sector_div(cylinders, dummy); /* * Handle extended translation size for logical drives * > 1Gb */ if ((ulong)capacity >= 0x200000) { heads = 255; sectors = 63; dummy = heads * sectors; cylinders = capacity; sector_div(cylinders, dummy); } /* return result */ params[0] = heads; params[1] = sectors; params[2] = cylinders; return 0; } /** * _scsih_response_code - translation of device response code * @ioc: per adapter object * @response_code: response code returned by the device * * Return nothing. */ static void _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code) { char *desc; switch (response_code) { case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE: desc = "task management request completed"; break; case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME: desc = "invalid frame"; break; case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: desc = "task management request not supported"; break; case MPI2_SCSITASKMGMT_RSP_TM_FAILED: desc = "task management request failed"; break; case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED: desc = "task management request succeeded"; break; case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN: desc = "invalid lun"; break; case 0xA: desc = "overlapped tag attempted"; break; case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: desc = "task queued, however not sent to target"; break; default: desc = "unknown"; break; } printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n", ioc->name, response_code, desc); } /** * _scsih_tm_done - tm completion routine * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: none. * * The callback handler when using scsih_issue_tm. * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ static u8 _scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { MPI2DefaultReply_t *mpi_reply; if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED) return 1; if (ioc->tm_cmds.smid != smid) return 1; mpt2sas_base_flush_reply_queues(ioc); ioc->tm_cmds.status |= MPT2_CMD_COMPLETE; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); if (mpi_reply) { memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID; } ioc->tm_cmds.status &= ~MPT2_CMD_PENDING; complete(&ioc->tm_cmds.done); return 1; } /** * mpt2sas_scsih_set_tm_flag - set per target tm_busy * @ioc: per adapter object * @handle: device handle * * During taskmangement request, we need to freeze the device queue. */ void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_device *sdev; u8 skip = 0; shost_for_each_device(sdev, ioc->shost) { if (skip) continue; sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data) continue; if (sas_device_priv_data->sas_target->handle == handle) { sas_device_priv_data->sas_target->tm_busy = 1; skip = 1; ioc->ignore_loginfos = 1; } } } /** * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy * @ioc: per adapter object * @handle: device handle * * During taskmangement request, we need to freeze the device queue. */ void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_device *sdev; u8 skip = 0; shost_for_each_device(sdev, ioc->shost) { if (skip) continue; sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data) continue; if (sas_device_priv_data->sas_target->handle == handle) { sas_device_priv_data->sas_target->tm_busy = 0; skip = 1; ioc->ignore_loginfos = 0; } } } /** * mpt2sas_scsih_issue_tm - main routine for sending tm requests * @ioc: per adapter struct * @device_handle: device handle * @channel: the channel assigned by the OS * @id: the id assigned by the OS * @lun: lun number * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) * @smid_task: smid assigned to the task * @timeout: timeout in seconds * @serial_number: the serial_number from scmd * @m_type: TM_MUTEX_ON or TM_MUTEX_OFF * Context: user * * A generic API for sending task management requests to firmware. * * The callback index is set inside `ioc->tm_cb_idx`. * * Return SUCCESS or FAILED. */ int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint channel, uint id, uint lun, u8 type, u16 smid_task, ulong timeout, unsigned long serial_number, enum mutex_type m_type) { Mpi2SCSITaskManagementRequest_t *mpi_request; Mpi2SCSITaskManagementReply_t *mpi_reply; u16 smid = 0; u32 ioc_state; unsigned long timeleft; struct scsiio_tracker *scsi_lookup = NULL; int rc; if (m_type == TM_MUTEX_ON) mutex_lock(&ioc->tm_cmds.mutex); if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) { printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n", __func__, ioc->name); rc = FAILED; goto err_out; } if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) { printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", __func__, ioc->name); rc = FAILED; goto err_out; } ioc_state = mpt2sas_base_get_iocstate(ioc, 0); if (ioc_state & MPI2_DOORBELL_USED) { dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell " "active!\n", ioc->name)); rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); rc = (!rc) ? SUCCESS : FAILED; goto err_out; } if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt2sas_base_fault_info(ioc, ioc_state & MPI2_DOORBELL_DATA_MASK); rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); rc = (!rc) ? SUCCESS : FAILED; goto err_out; } smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx); if (!smid) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); rc = FAILED; goto err_out; } if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) scsi_lookup = &ioc->scsi_lookup[smid_task - 1]; dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x)," " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, smid_task)); ioc->tm_cmds.status = MPT2_CMD_PENDING; mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); ioc->tm_cmds.smid = smid; memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t)); mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; mpi_request->DevHandle = cpu_to_le16(handle); mpi_request->TaskType = type; mpi_request->TaskMID = cpu_to_le16(smid_task); int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); mpt2sas_scsih_set_tm_flag(ioc, handle); init_completion(&ioc->tm_cmds.done); mpt2sas_base_put_smid_hi_priority(ioc, smid); timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) { printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, __func__); _debug_dump_mf(mpi_request, sizeof(Mpi2SCSITaskManagementRequest_t)/4); if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) { rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); rc = (!rc) ? SUCCESS : FAILED; ioc->tm_cmds.status = MPT2_CMD_NOT_USED; mpt2sas_scsih_clear_tm_flag(ioc, handle); goto err_out; } } if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) { mpi_reply = ioc->tm_cmds.reply; dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: " "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->IOCStatus), le32_to_cpu(mpi_reply->IOCLogInfo), le32_to_cpu(mpi_reply->TerminationCount))); if (ioc->logging_level & MPT_DEBUG_TM) { _scsih_response_code(ioc, mpi_reply->ResponseCode); if (mpi_reply->IOCStatus) _debug_dump_mf(mpi_request, sizeof(Mpi2SCSITaskManagementRequest_t)/4); } } switch (type) { case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK: rc = SUCCESS; if (scsi_lookup->scmd == NULL) break; rc = FAILED; break; case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET: if (_scsih_scsi_lookup_find_by_target(ioc, id, channel)) rc = FAILED; else rc = SUCCESS; break; case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET: case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET: if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel)) rc = FAILED; else rc = SUCCESS; break; case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK: rc = SUCCESS; break; default: rc = FAILED; break; } mpt2sas_scsih_clear_tm_flag(ioc, handle); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; if (m_type == TM_MUTEX_ON) mutex_unlock(&ioc->tm_cmds.mutex); return rc; err_out: if (m_type == TM_MUTEX_ON) mutex_unlock(&ioc->tm_cmds.mutex); return rc; } /** * _scsih_tm_display_info - displays info about the device * @ioc: per adapter struct * @scmd: pointer to scsi command object * * Called by task management callback handlers. */ static void _scsih_tm_display_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd) { struct scsi_target *starget = scmd->device->sdev_target; struct MPT2SAS_TARGET *priv_target = starget->hostdata; struct _sas_device *sas_device = NULL; unsigned long flags; char *device_str = NULL; if (!priv_target) return; if (ioc->hide_ir_msg) device_str = "WarpDrive"; else device_str = "volume"; scsi_print_command(scmd); if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) { starget_printk(KERN_INFO, starget, "%s handle(0x%04x), " "%s wwid(0x%016llx)\n", device_str, priv_target->handle, device_str, (unsigned long long)priv_target->sas_address); } else { spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, priv_target->sas_address); if (sas_device) { if (priv_target->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) { starget_printk(KERN_INFO, starget, "volume handle(0x%04x), " "volume wwid(0x%016llx)\n", sas_device->volume_handle, (unsigned long long)sas_device->volume_wwid); } starget_printk(KERN_INFO, starget, "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n", sas_device->handle, (unsigned long long)sas_device->sas_address, sas_device->phy); starget_printk(KERN_INFO, starget, "enclosure_logical_id(0x%016llx), slot(%d)\n", (unsigned long long)sas_device->enclosure_logical_id, sas_device->slot); } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } } /** * _scsih_abort - eh threads main abort routine * @scmd: pointer to scsi command object * * Returns SUCCESS if command aborted else FAILED */ static int _scsih_abort(struct scsi_cmnd *scmd) { struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); struct MPT2SAS_DEVICE *sas_device_priv_data; u16 smid; u16 handle; int r; sdev_printk(KERN_INFO, scmd->device, "attempting task abort! " "scmd(%p)\n", scmd); _scsih_tm_display_info(ioc, scmd); sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { sdev_printk(KERN_INFO, scmd->device, "device been deleted! " "scmd(%p)\n", scmd); scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); r = SUCCESS; goto out; } /* search for the command */ smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd); if (!smid) { scmd->result = DID_RESET << 16; r = SUCCESS; goto out; } /* for hidden raid components and volumes this is not supported */ if (sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_RAID_COMPONENT || sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) { scmd->result = DID_RESET << 16; r = FAILED; goto out; } mpt2sas_halt_firmware(ioc); handle = sas_device_priv_data->sas_target->handle; r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, scmd->device->id, scmd->device->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, scmd->serial_number, TM_MUTEX_ON); out: sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n", ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); return r; } /** * _scsih_dev_reset - eh threads main device reset routine * @scmd: pointer to scsi command object * * Returns SUCCESS if command aborted else FAILED */ static int _scsih_dev_reset(struct scsi_cmnd *scmd) { struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); struct MPT2SAS_DEVICE *sas_device_priv_data; struct _sas_device *sas_device; unsigned long flags; u16 handle; int r; struct scsi_target *starget = scmd->device->sdev_target; starget_printk(KERN_INFO, starget, "attempting device reset! " "scmd(%p)\n", scmd); _scsih_tm_display_info(ioc, scmd); sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { starget_printk(KERN_INFO, starget, "device been deleted! " "scmd(%p)\n", scmd); scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); r = SUCCESS; goto out; } /* for hidden raid components obtain the volume_handle */ handle = 0; if (sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) { spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, sas_device_priv_data->sas_target->handle); if (sas_device) handle = sas_device->volume_handle; spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } else handle = sas_device_priv_data->sas_target->handle; if (!handle) { scmd->result = DID_RESET << 16; r = FAILED; goto out; } r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, scmd->device->id, scmd->device->lun, MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, 0, TM_MUTEX_ON); out: sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n", ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); return r; } /** * _scsih_target_reset - eh threads main target reset routine * @scmd: pointer to scsi command object * * Returns SUCCESS if command aborted else FAILED */ static int _scsih_target_reset(struct scsi_cmnd *scmd) { struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); struct MPT2SAS_DEVICE *sas_device_priv_data; struct _sas_device *sas_device; unsigned long flags; u16 handle; int r; struct scsi_target *starget = scmd->device->sdev_target; starget_printk(KERN_INFO, starget, "attempting target reset! " "scmd(%p)\n", scmd); _scsih_tm_display_info(ioc, scmd); sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { starget_printk(KERN_INFO, starget, "target been deleted! " "scmd(%p)\n", scmd); scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); r = SUCCESS; goto out; } /* for hidden raid components obtain the volume_handle */ handle = 0; if (sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) { spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, sas_device_priv_data->sas_target->handle); if (sas_device) handle = sas_device->volume_handle; spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } else handle = sas_device_priv_data->sas_target->handle; if (!handle) { scmd->result = DID_RESET << 16; r = FAILED; goto out; } r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30, 0, TM_MUTEX_ON); out: starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n", ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); return r; } /** * _scsih_host_reset - eh threads main host reset routine * @scmd: pointer to scsi command object * * Returns SUCCESS if command aborted else FAILED */ static int _scsih_host_reset(struct scsi_cmnd *scmd) { struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); int r, retval; printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n", ioc->name, scmd); scsi_print_command(scmd); retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); r = (retval < 0) ? FAILED : SUCCESS; printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n", ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); return r; } /** * _scsih_fw_event_add - insert and queue up fw_event * @ioc: per adapter object * @fw_event: object describing the event * Context: This function will acquire ioc->fw_event_lock. * * This adds the firmware event object into link list, then queues it up to * be processed from user context. * * Return nothing. */ static void _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { unsigned long flags; if (ioc->firmware_event_thread == NULL) return; spin_lock_irqsave(&ioc->fw_event_lock, flags); list_add_tail(&fw_event->list, &ioc->fw_event_list); INIT_DELAYED_WORK(&fw_event->delayed_work, _firmware_event_work); queue_delayed_work(ioc->firmware_event_thread, &fw_event->delayed_work, 0); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } /** * _scsih_fw_event_free - delete fw_event * @ioc: per adapter object * @fw_event: object describing the event * Context: This function will acquire ioc->fw_event_lock. * * This removes firmware event object from link list, frees associated memory. * * Return nothing. */ static void _scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { unsigned long flags; spin_lock_irqsave(&ioc->fw_event_lock, flags); list_del(&fw_event->list); kfree(fw_event->event_data); kfree(fw_event); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } /** * _scsih_error_recovery_delete_devices - remove devices not responding * @ioc: per adapter object * * Return nothing. */ static void _scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc) { struct fw_event_work *fw_event; if (ioc->is_driver_loading) return; fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES; fw_event->ioc = ioc; _scsih_fw_event_add(ioc, fw_event); } /** * mpt2sas_port_enable_complete - port enable completed (fake event) * @ioc: per adapter object * * Return nothing. */ void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc) { struct fw_event_work *fw_event; fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); if (!fw_event) return; fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE; fw_event->ioc = ioc; _scsih_fw_event_add(ioc, fw_event); } /** * _scsih_fw_event_cleanup_queue - cleanup event queue * @ioc: per adapter object * * Walk the firmware event queue, either killing timers, or waiting * for outstanding events to complete * * Return nothing. */ static void _scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc) { struct fw_event_work *fw_event, *next; if (list_empty(&ioc->fw_event_list) || !ioc->firmware_event_thread || in_interrupt()) return; list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) { if (cancel_delayed_work(&fw_event->delayed_work)) { _scsih_fw_event_free(ioc, fw_event); continue; } fw_event->cancel_pending_work = 1; } } /** * _scsih_ublock_io_all_device - unblock every device * @ioc: per adapter object * * change the device state from block to running */ static void _scsih_ublock_io_all_device(struct MPT2SAS_ADAPTER *ioc) { struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_device *sdev; shost_for_each_device(sdev, ioc->shost) { sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data) continue; if (!sas_device_priv_data->block) continue; sas_device_priv_data->block = 0; dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_running, " "handle(0x%04x)\n", sas_device_priv_data->sas_target->handle)); scsi_internal_device_unblock(sdev); } } /** * _scsih_ublock_io_device - set the device state to SDEV_RUNNING * @ioc: per adapter object * @handle: device handle * * During device pull we need to appropiately set the sdev state. */ static void _scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_device *sdev; shost_for_each_device(sdev, ioc->shost) { sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data) continue; if (!sas_device_priv_data->block) continue; if (sas_device_priv_data->sas_target->handle == handle) { dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, MPT2SAS_INFO_FMT "SDEV_RUNNING: " "handle(0x%04x)\n", ioc->name, handle)); sas_device_priv_data->block = 0; scsi_internal_device_unblock(sdev); } } } /** * _scsih_block_io_all_device - set the device state to SDEV_BLOCK * @ioc: per adapter object * @handle: device handle * * During device pull we need to appropiately set the sdev state. */ static void _scsih_block_io_all_device(struct MPT2SAS_ADAPTER *ioc) { struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_device *sdev; shost_for_each_device(sdev, ioc->shost) { sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data) continue; if (sas_device_priv_data->block) continue; sas_device_priv_data->block = 1; dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_blocked, " "handle(0x%04x)\n", sas_device_priv_data->sas_target->handle)); scsi_internal_device_block(sdev); } } /** * _scsih_block_io_device - set the device state to SDEV_BLOCK * @ioc: per adapter object * @handle: device handle * * During device pull we need to appropiately set the sdev state. */ static void _scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_device *sdev; shost_for_each_device(sdev, ioc->shost) { sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data) continue; if (sas_device_priv_data->block) continue; if (sas_device_priv_data->sas_target->handle == handle) { dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, MPT2SAS_INFO_FMT "SDEV_BLOCK: " "handle(0x%04x)\n", ioc->name, handle)); sas_device_priv_data->block = 1; scsi_internal_device_block(sdev); } } } /** * _scsih_block_io_to_children_attached_to_ex * @ioc: per adapter object * @sas_expander: the sas_device object * * This routine set sdev state to SDEV_BLOCK for all devices * attached to this expander. This function called when expander is * pulled. */ static void _scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_expander) { struct _sas_port *mpt2sas_port; struct _sas_device *sas_device; struct _sas_node *expander_sibling; unsigned long flags; if (!sas_expander) return; list_for_each_entry(mpt2sas_port, &sas_expander->sas_port_list, port_list) { if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE) { spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, mpt2sas_port->remote_identify.sas_address); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (!sas_device) continue; _scsih_block_io_device(ioc, sas_device->handle); } } list_for_each_entry(mpt2sas_port, &sas_expander->sas_port_list, port_list) { if (mpt2sas_port->remote_identify.device_type == SAS_EDGE_EXPANDER_DEVICE || mpt2sas_port->remote_identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) { spin_lock_irqsave(&ioc->sas_node_lock, flags); expander_sibling = mpt2sas_scsih_expander_find_by_sas_address( ioc, mpt2sas_port->remote_identify.sas_address); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); _scsih_block_io_to_children_attached_to_ex(ioc, expander_sibling); } } } /** * _scsih_block_io_to_children_attached_directly * @ioc: per adapter object * @event_data: topology change event data * * This routine set sdev state to SDEV_BLOCK for all devices * direct attached during device pull. */ static void _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataSasTopologyChangeList_t *event_data) { int i; u16 handle; u16 reason_code; u8 phy_number; for (i = 0; i < event_data->NumEntries; i++) { handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); if (!handle) continue; phy_number = event_data->StartPhyNum + i; reason_code = event_data->PHY[i].PhyStatus & MPI2_EVENT_SAS_TOPO_RC_MASK; if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING) _scsih_block_io_device(ioc, handle); } } /** * _scsih_tm_tr_send - send task management request * @ioc: per adapter object * @handle: device handle * Context: interrupt time. * * This code is to initiate the device removal handshake protocol * with controller firmware. This function will issue target reset * using high priority request queue. It will send a sas iounit * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion. * * This is designed to send muliple task management request at the same * time to the fifo. If the fifo is full, we will append the request, * and process it in a future completion. */ static void _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) { Mpi2SCSITaskManagementRequest_t *mpi_request; u16 smid; struct _sas_device *sas_device; struct MPT2SAS_TARGET *sas_target_priv_data; unsigned long flags; struct _tr_list *delayed_tr; if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " "progress!\n", __func__, ioc->name)); return; } /* if PD, then return */ if (test_bit(handle, ioc->pd_handles)) return; spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); if (sas_device && sas_device->starget && sas_device->starget->hostdata) { sas_target_priv_data = sas_device->starget->hostdata; sas_target_priv_data->deleted = 1; dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: handle(0x%04x), " "sas_addr(0x%016llx)\n", ioc->name, handle, (unsigned long long) sas_device->sas_address)); } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx); if (!smid) { delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); if (!delayed_tr) return; INIT_LIST_HEAD(&delayed_tr->list); delayed_tr->handle = handle; list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name, handle)); return; } dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), " "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid, ioc->tm_tr_cb_idx)); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; mpi_request->DevHandle = cpu_to_le16(handle); mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; mpt2sas_base_put_smid_hi_priority(ioc, smid); } /** * _scsih_sas_control_complete - completion routine * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: interrupt time. * * This is the sas iounit control completion routine. * This code is part of the code to initiate the device removal * handshake protocol with controller firmware. * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ static u8 _scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { #ifdef CONFIG_SCSI_MPT2SAS_LOGGING Mpi2SasIoUnitControlReply_t *mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); #endif dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_complete:handle(0x%04x), (open) " "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid, le16_to_cpu(mpi_reply->IOCStatus), le32_to_cpu(mpi_reply->IOCLogInfo))); return 1; } /** * _scsih_tm_tr_volume_send - send target reset request for volumes * @ioc: per adapter object * @handle: device handle * Context: interrupt time. * * This is designed to send muliple task management request at the same * time to the fifo. If the fifo is full, we will append the request, * and process it in a future completion. */ static void _scsih_tm_tr_volume_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) { Mpi2SCSITaskManagementRequest_t *mpi_request; u16 smid; struct _tr_list *delayed_tr; if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " "progress!\n", __func__, ioc->name)); return; } smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx); if (!smid) { delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); if (!delayed_tr) return; INIT_LIST_HEAD(&delayed_tr->list); delayed_tr->handle = handle; list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name, handle)); return; } dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), " "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid, ioc->tm_tr_volume_cb_idx)); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; mpi_request->DevHandle = cpu_to_le16(handle); mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; mpt2sas_base_put_smid_hi_priority(ioc, smid); } /** * _scsih_tm_volume_tr_complete - target reset completion * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: interrupt time. * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ static u8 _scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { u16 handle; Mpi2SCSITaskManagementRequest_t *mpi_request_tm; Mpi2SCSITaskManagementReply_t *mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " "progress!\n", __func__, ioc->name)); return 1; } mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid); handle = le16_to_cpu(mpi_request_tm->DevHandle); if (handle != le16_to_cpu(mpi_reply->DevHandle)) { dewtprintk(ioc, printk("spurious interrupt: " "handle(0x%04x:0x%04x), smid(%d)!!!\n", handle, le16_to_cpu(mpi_reply->DevHandle), smid)); return 0; } dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), " "loginfo(0x%08x), completed(%d)\n", ioc->name, handle, smid, le16_to_cpu(mpi_reply->IOCStatus), le32_to_cpu(mpi_reply->IOCLogInfo), le32_to_cpu(mpi_reply->TerminationCount))); return _scsih_check_for_pending_tm(ioc, smid); } /** * _scsih_tm_tr_complete - * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: interrupt time. * * This is the target reset completion routine. * This code is part of the code to initiate the device removal * handshake protocol with controller firmware. * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE) * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ static u8 _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { u16 handle; Mpi2SCSITaskManagementRequest_t *mpi_request_tm; Mpi2SCSITaskManagementReply_t *mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); Mpi2SasIoUnitControlRequest_t *mpi_request; u16 smid_sas_ctrl; if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " "progress!\n", __func__, ioc->name)); return 1; } mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid); handle = le16_to_cpu(mpi_request_tm->DevHandle); if (handle != le16_to_cpu(mpi_reply->DevHandle)) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "spurious interrupt: " "handle(0x%04x:0x%04x), smid(%d)!!!\n", ioc->name, handle, le16_to_cpu(mpi_reply->DevHandle), smid)); return 0; } dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), " "loginfo(0x%08x), completed(%d)\n", ioc->name, handle, smid, le16_to_cpu(mpi_reply->IOCStatus), le32_to_cpu(mpi_reply->IOCLogInfo), le32_to_cpu(mpi_reply->TerminationCount))); smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx); if (!smid_sas_ctrl) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); return 1; } dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_send:handle(0x%04x), " "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid_sas_ctrl, ioc->tm_sas_control_cb_idx)); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl); memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE; mpi_request->DevHandle = mpi_request_tm->DevHandle; mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl); return _scsih_check_for_pending_tm(ioc, smid); } /** * _scsih_check_for_pending_tm - check for pending task management * @ioc: per adapter object * @smid: system request message index * * This will check delayed target reset list, and feed the * next reqeust. * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid) { struct _tr_list *delayed_tr; if (!list_empty(&ioc->delayed_tr_volume_list)) { delayed_tr = list_entry(ioc->delayed_tr_volume_list.next, struct _tr_list, list); mpt2sas_base_free_smid(ioc, smid); _scsih_tm_tr_volume_send(ioc, delayed_tr->handle); list_del(&delayed_tr->list); kfree(delayed_tr); return 0; } if (!list_empty(&ioc->delayed_tr_list)) { delayed_tr = list_entry(ioc->delayed_tr_list.next, struct _tr_list, list); mpt2sas_base_free_smid(ioc, smid); _scsih_tm_tr_send(ioc, delayed_tr->handle); list_del(&delayed_tr->list); kfree(delayed_tr); return 0; } return 1; } /** * _scsih_check_topo_delete_events - sanity check on topo events * @ioc: per adapter object * @event_data: the event data payload * * This routine added to better handle cable breaker. * * This handles the case where driver receives multiple expander * add and delete events in a single shot. When there is a delete event * the routine will void any pending add events waiting in the event queue. * * Return nothing. */ static void _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataSasTopologyChangeList_t *event_data) { struct fw_event_work *fw_event; Mpi2EventDataSasTopologyChangeList_t *local_event_data; u16 expander_handle; struct _sas_node *sas_expander; unsigned long flags; int i, reason_code; u16 handle; for (i = 0 ; i < event_data->NumEntries; i++) { handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); if (!handle) continue; reason_code = event_data->PHY[i].PhyStatus & MPI2_EVENT_SAS_TOPO_RC_MASK; if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING) _scsih_tm_tr_send(ioc, handle); } expander_handle = le16_to_cpu(event_data->ExpanderDevHandle); if (expander_handle < ioc->sas_hba.num_phys) { _scsih_block_io_to_children_attached_directly(ioc, event_data); return; } if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING || event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) { spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, expander_handle); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander); } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING) _scsih_block_io_to_children_attached_directly(ioc, event_data); if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) return; /* mark ignore flag for pending events */ spin_lock_irqsave(&ioc->fw_event_lock, flags); list_for_each_entry(fw_event, &ioc->fw_event_list, list) { if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST || fw_event->ignore) continue; local_event_data = fw_event->event_data; if (local_event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED || local_event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING) { if (le16_to_cpu(local_event_data->ExpanderDevHandle) == expander_handle) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting ignoring flag\n", ioc->name)); fw_event->ignore = 1; } } } spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } /** * _scsih_set_volume_delete_flag - setting volume delete flag * @ioc: per adapter object * @handle: device handle * * This * Return nothing. */ static void _scsih_set_volume_delete_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct _raid_device *raid_device; struct MPT2SAS_TARGET *sas_target_priv_data; unsigned long flags; spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_handle(ioc, handle); if (raid_device && raid_device->starget && raid_device->starget->hostdata) { sas_target_priv_data = raid_device->starget->hostdata; sas_target_priv_data->deleted = 1; dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: handle(0x%04x), " "wwid(0x%016llx)\n", ioc->name, handle, (unsigned long long) raid_device->wwid)); } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); } /** * _scsih_set_volume_handle_for_tr - set handle for target reset to volume * @handle: input handle * @a: handle for volume a * @b: handle for volume b * * IR firmware only supports two raid volumes. The purpose of this * routine is to set the volume handle in either a or b. When the given * input handle is non-zero, or when a and b have not been set before. */ static void _scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b) { if (!handle || handle == *a || handle == *b) return; if (!*a) *a = handle; else if (!*b) *b = handle; } /** * _scsih_check_ir_config_unhide_events - check for UNHIDE events * @ioc: per adapter object * @event_data: the event data payload * Context: interrupt time. * * This routine will send target reset to volume, followed by target * resets to the PDs. This is called when a PD has been removed, or * volume has been deleted or removed. When the target reset is sent * to volume, the PD target resets need to be queued to start upon * completion of the volume target reset. * * Return nothing. */ static void _scsih_check_ir_config_unhide_events(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataIrConfigChangeList_t *event_data) { Mpi2EventIrConfigElement_t *element; int i; u16 handle, volume_handle, a, b; struct _tr_list *delayed_tr; a = 0; b = 0; if (ioc->is_warpdrive) return; /* Volume Resets for Deleted or Removed */ element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; for (i = 0; i < event_data->NumElements; i++, element++) { if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED || element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_REMOVED) { volume_handle = le16_to_cpu(element->VolDevHandle); _scsih_set_volume_delete_flag(ioc, volume_handle); _scsih_set_volume_handle_for_tr(volume_handle, &a, &b); } } /* Volume Resets for UNHIDE events */ element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; for (i = 0; i < event_data->NumElements; i++, element++) { if (le32_to_cpu(event_data->Flags) & MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) continue; if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) { volume_handle = le16_to_cpu(element->VolDevHandle); _scsih_set_volume_handle_for_tr(volume_handle, &a, &b); } } if (a) _scsih_tm_tr_volume_send(ioc, a); if (b) _scsih_tm_tr_volume_send(ioc, b); /* PD target resets */ element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; for (i = 0; i < event_data->NumElements; i++, element++) { if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE) continue; handle = le16_to_cpu(element->PhysDiskDevHandle); volume_handle = le16_to_cpu(element->VolDevHandle); clear_bit(handle, ioc->pd_handles); if (!volume_handle) _scsih_tm_tr_send(ioc, handle); else if (volume_handle == a || volume_handle == b) { delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); BUG_ON(!delayed_tr); INIT_LIST_HEAD(&delayed_tr->list); delayed_tr->handle = handle; list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name, handle)); } else _scsih_tm_tr_send(ioc, handle); } } /** * _scsih_check_volume_delete_events - set delete flag for volumes * @ioc: per adapter object * @event_data: the event data payload * Context: interrupt time. * * This will handle the case when the cable connected to entire volume is * pulled. We will take care of setting the deleted flag so normal IO will * not be sent. * * Return nothing. */ static void _scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataIrVolume_t *event_data) { u32 state; if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) return; state = le32_to_cpu(event_data->NewValue); if (state == MPI2_RAID_VOL_STATE_MISSING || state == MPI2_RAID_VOL_STATE_FAILED) _scsih_set_volume_delete_flag(ioc, le16_to_cpu(event_data->VolDevHandle)); } /** * _scsih_flush_running_cmds - completing outstanding commands. * @ioc: per adapter object * * The flushing out of all pending scmd commands following host reset, * where all IO is dropped to the floor. * * Return nothing. */ static void _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) { struct scsi_cmnd *scmd; u16 smid; u16 count = 0; for (smid = 1; smid <= ioc->scsiio_depth; smid++) { scmd = _scsih_scsi_lookup_get_clear(ioc, smid); if (!scmd) continue; count++; mpt2sas_base_free_smid(ioc, smid); scsi_dma_unmap(scmd); if (ioc->pci_error_recovery) scmd->result = DID_NO_CONNECT << 16; else scmd->result = DID_RESET << 16; scmd->scsi_done(scmd); } dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n", ioc->name, count)); } /** * _scsih_setup_eedp - setup MPI request for EEDP transfer * @scmd: pointer to scsi command object * @mpi_request: pointer to the SCSI_IO reqest message frame * * Supporting protection 1 and 3. * * Returns nothing */ static void _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request) { u16 eedp_flags; unsigned char prot_op = scsi_get_prot_op(scmd); unsigned char prot_type = scsi_get_prot_type(scmd); if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL) return; if (prot_op == SCSI_PROT_READ_STRIP) eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP; else if (prot_op == SCSI_PROT_WRITE_INSERT) eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP; else return; switch (prot_type) { case SCSI_PROT_DIF_TYPE1: case SCSI_PROT_DIF_TYPE2: /* * enable ref/guard checking * auto increment ref tag */ eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG | MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG | MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; mpi_request->CDB.EEDP32.PrimaryReferenceTag = cpu_to_be32(scsi_get_lba(scmd)); break; case SCSI_PROT_DIF_TYPE3: /* * enable guard checking */ eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; break; } mpi_request->EEDPBlockSize = cpu_to_le32(scmd->device->sector_size); mpi_request->EEDPFlags = cpu_to_le16(eedp_flags); } /** * _scsih_eedp_error_handling - return sense code for EEDP errors * @scmd: pointer to scsi command object * @ioc_status: ioc status * * Returns nothing */ static void _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) { u8 ascq; u8 sk; u8 host_byte; switch (ioc_status) { case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: ascq = 0x01; break; case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: ascq = 0x02; break; case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: ascq = 0x03; break; default: ascq = 0x00; break; } if (scmd->sc_data_direction == DMA_TO_DEVICE) { sk = ILLEGAL_REQUEST; host_byte = DID_ABORT; } else { sk = ABORTED_COMMAND; host_byte = DID_OK; } scsi_build_sense_buffer(0, scmd->sense_buffer, sk, 0x10, ascq); scmd->result = DRIVER_SENSE << 24 | (host_byte << 16) | SAM_STAT_CHECK_CONDITION; } /** * _scsih_scsi_direct_io_get - returns direct io flag * @ioc: per adapter object * @smid: system request message index * * Returns the smid stored scmd pointer. */ static inline u8 _scsih_scsi_direct_io_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) { return ioc->scsi_lookup[smid - 1].direct_io; } /** * _scsih_scsi_direct_io_set - sets direct io flag * @ioc: per adapter object * @smid: system request message index * @direct_io: Zero or non-zero value to set in the direct_io flag * * Returns Nothing. */ static inline void _scsih_scsi_direct_io_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 direct_io) { ioc->scsi_lookup[smid - 1].direct_io = direct_io; } /** * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O * @ioc: per adapter object * @scmd: pointer to scsi command object * @raid_device: pointer to raid device data structure * @mpi_request: pointer to the SCSI_IO reqest message frame * @smid: system request message index * * Returns nothing */ static void _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request, u16 smid) { u32 v_lba, p_lba, stripe_off, stripe_unit, column, io_size; u32 stripe_sz, stripe_exp; u8 num_pds, *cdb_ptr, *tmp_ptr, *lba_ptr1, *lba_ptr2; u8 cdb0 = scmd->cmnd[0]; /* * Try Direct I/O to RAID memeber disks */ if (cdb0 == READ_16 || cdb0 == READ_10 || cdb0 == WRITE_16 || cdb0 == WRITE_10) { cdb_ptr = mpi_request->CDB.CDB32; if ((cdb0 < READ_16) || !(cdb_ptr[2] | cdb_ptr[3] | cdb_ptr[4] | cdb_ptr[5])) { io_size = scsi_bufflen(scmd) >> 9; /* get virtual lba */ lba_ptr1 = lba_ptr2 = (cdb0 < READ_16) ? &cdb_ptr[2] : &cdb_ptr[6]; tmp_ptr = (u8 *)&v_lba + 3; *tmp_ptr-- = *lba_ptr1++; *tmp_ptr-- = *lba_ptr1++; *tmp_ptr-- = *lba_ptr1++; *tmp_ptr = *lba_ptr1; if (((u64)v_lba + (u64)io_size - 1) <= (u32)raid_device->max_lba) { stripe_sz = raid_device->stripe_sz; stripe_exp = raid_device->stripe_exponent; stripe_off = v_lba & (stripe_sz - 1); /* Check whether IO falls within a stripe */ if ((stripe_off + io_size) <= stripe_sz) { num_pds = raid_device->num_pds; p_lba = v_lba >> stripe_exp; stripe_unit = p_lba / num_pds; column = p_lba % num_pds; p_lba = (stripe_unit << stripe_exp) + stripe_off; mpi_request->DevHandle = cpu_to_le16(raid_device-> pd_handle[column]); tmp_ptr = (u8 *)&p_lba + 3; *lba_ptr2++ = *tmp_ptr--; *lba_ptr2++ = *tmp_ptr--; *lba_ptr2++ = *tmp_ptr--; *lba_ptr2 = *tmp_ptr; /* * WD: To indicate this I/O is directI/O */ _scsih_scsi_direct_io_set(ioc, smid, 1); } } } } } /** * _scsih_qcmd - main scsi request entry point * @scmd: pointer to scsi command object * @done: function pointer to be invoked on completion * * The callback index is set inside `ioc->scsi_io_cb_idx`. * * Returns 0 on success. If there's a failure, return either: * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full */ static int _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) { struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); struct MPT2SAS_DEVICE *sas_device_priv_data; struct MPT2SAS_TARGET *sas_target_priv_data; struct _raid_device *raid_device; Mpi2SCSIIORequest_t *mpi_request; u32 mpi_control; u16 smid; scmd->scsi_done = done; sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); return 0; } if (ioc->pci_error_recovery || ioc->remove_host) { scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); return 0; } sas_target_priv_data = sas_device_priv_data->sas_target; /* invalid device handle */ if (sas_target_priv_data->handle == MPT2SAS_INVALID_DEVICE_HANDLE) { scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); return 0; } /* host recovery or link resets sent via IOCTLs */ if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) return SCSI_MLQUEUE_HOST_BUSY; /* device busy with task management */ else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy) return SCSI_MLQUEUE_DEVICE_BUSY; /* device has been deleted */ else if (sas_target_priv_data->deleted) { scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); return 0; } if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; else if (scmd->sc_data_direction == DMA_TO_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_WRITE; else mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER; /* set tags */ if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) { if (scmd->device->tagged_supported) { if (scmd->device->ordered_tags) mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ; else mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; } else /* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */ /* mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED; */ mpi_control |= (0x500); } else mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; /* Make sure Device is not raid volume. * We do not expose raid functionality to upper layer for warpdrive. */ if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) && sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32) mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd); if (!smid) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); goto out; } mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t)); _scsih_setup_eedp(scmd, mpi_request); if (scmd->cmd_len == 32) mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT; mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; if (sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; else mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; mpi_request->DevHandle = cpu_to_le16(sas_device_priv_data->sas_target->handle); mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd)); mpi_request->Control = cpu_to_le32(mpi_control); mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len); mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR; mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE; mpi_request->SenseBufferLowAddress = mpt2sas_base_get_sense_buffer_dma(ioc, smid); mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4; mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI + MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR); mpi_request->VF_ID = 0; /* TODO */ mpi_request->VP_ID = 0; int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *) mpi_request->LUN); memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); if (!mpi_request->DataLength) { mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL); } else { if (_scsih_build_scatter_gather(ioc, scmd, smid)) { mpt2sas_base_free_smid(ioc, smid); goto out; } } raid_device = sas_target_priv_data->raid_device; if (raid_device && raid_device->direct_io_enabled) _scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request, smid); if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) mpt2sas_base_put_smid_scsi_io(ioc, smid, le16_to_cpu(mpi_request->DevHandle)); else mpt2sas_base_put_smid_default(ioc, smid); return 0; out: return SCSI_MLQUEUE_HOST_BUSY; } static DEF_SCSI_QCMD(_scsih_qcmd) /** * _scsih_normalize_sense - normalize descriptor and fixed format sense data * @sense_buffer: sense data returned by target * @data: normalized skey/asc/ascq * * Return nothing. */ static void _scsih_normalize_sense(char *sense_buffer, struct sense_info *data) { if ((sense_buffer[0] & 0x7F) >= 0x72) { /* descriptor format */ data->skey = sense_buffer[1] & 0x0F; data->asc = sense_buffer[2]; data->ascq = sense_buffer[3]; } else { /* fixed format */ data->skey = sense_buffer[2] & 0x0F; data->asc = sense_buffer[12]; data->ascq = sense_buffer[13]; } } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request * @ioc: per adapter object * @scmd: pointer to scsi command object * @mpi_reply: reply mf payload returned from firmware * * scsi_status - SCSI Status code returned from target device * scsi_state - state info associated with SCSI_IO determined by ioc * ioc_status - ioc supplied status info * * Return nothing. */ static void _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, Mpi2SCSIIOReply_t *mpi_reply, u16 smid) { u32 response_info; u8 *response_bytes; u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; u8 scsi_state = mpi_reply->SCSIState; u8 scsi_status = mpi_reply->SCSIStatus; char *desc_ioc_state = NULL; char *desc_scsi_status = NULL; char *desc_scsi_state = ioc->tmp_string; u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo); struct _sas_device *sas_device = NULL; unsigned long flags; struct scsi_target *starget = scmd->device->sdev_target; struct MPT2SAS_TARGET *priv_target = starget->hostdata; char *device_str = NULL; if (!priv_target) return; if (ioc->hide_ir_msg) device_str = "WarpDrive"; else device_str = "volume"; if (log_info == 0x31170000) return; switch (ioc_status) { case MPI2_IOCSTATUS_SUCCESS: desc_ioc_state = "success"; break; case MPI2_IOCSTATUS_INVALID_FUNCTION: desc_ioc_state = "invalid function"; break; case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: desc_ioc_state = "scsi recovered error"; break; case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: desc_ioc_state = "scsi invalid dev handle"; break; case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: desc_ioc_state = "scsi device not there"; break; case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: desc_ioc_state = "scsi data overrun"; break; case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: desc_ioc_state = "scsi data underrun"; break; case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: desc_ioc_state = "scsi io data error"; break; case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: desc_ioc_state = "scsi protocol error"; break; case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: desc_ioc_state = "scsi task terminated"; break; case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: desc_ioc_state = "scsi residual mismatch"; break; case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: desc_ioc_state = "scsi task mgmt failed"; break; case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: desc_ioc_state = "scsi ioc terminated"; break; case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: desc_ioc_state = "scsi ext terminated"; break; case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: desc_ioc_state = "eedp guard error"; break; case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: desc_ioc_state = "eedp ref tag error"; break; case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: desc_ioc_state = "eedp app tag error"; break; default: desc_ioc_state = "unknown"; break; } switch (scsi_status) { case MPI2_SCSI_STATUS_GOOD: desc_scsi_status = "good"; break; case MPI2_SCSI_STATUS_CHECK_CONDITION: desc_scsi_status = "check condition"; break; case MPI2_SCSI_STATUS_CONDITION_MET: desc_scsi_status = "condition met"; break; case MPI2_SCSI_STATUS_BUSY: desc_scsi_status = "busy"; break; case MPI2_SCSI_STATUS_INTERMEDIATE: desc_scsi_status = "intermediate"; break; case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET: desc_scsi_status = "intermediate condmet"; break; case MPI2_SCSI_STATUS_RESERVATION_CONFLICT: desc_scsi_status = "reservation conflict"; break; case MPI2_SCSI_STATUS_COMMAND_TERMINATED: desc_scsi_status = "command terminated"; break; case MPI2_SCSI_STATUS_TASK_SET_FULL: desc_scsi_status = "task set full"; break; case MPI2_SCSI_STATUS_ACA_ACTIVE: desc_scsi_status = "aca active"; break; case MPI2_SCSI_STATUS_TASK_ABORTED: desc_scsi_status = "task aborted"; break; default: desc_scsi_status = "unknown"; break; } desc_scsi_state[0] = '\0'; if (!scsi_state) desc_scsi_state = " "; if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) strcat(desc_scsi_state, "response info "); if (scsi_state & MPI2_SCSI_STATE_TERMINATED) strcat(desc_scsi_state, "state terminated "); if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS) strcat(desc_scsi_state, "no status "); if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED) strcat(desc_scsi_state, "autosense failed "); if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) strcat(desc_scsi_state, "autosense valid "); scsi_print_command(scmd); if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) { printk(MPT2SAS_WARN_FMT "\t%s wwid(0x%016llx)\n", ioc->name, device_str, (unsigned long long)priv_target->sas_address); } else { spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, priv_target->sas_address); if (sas_device) { printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), " "phy(%d)\n", ioc->name, sas_device->sas_address, sas_device->phy); printk(MPT2SAS_WARN_FMT "\tenclosure_logical_id(0x%016llx), slot(%d)\n", ioc->name, sas_device->enclosure_logical_id, sas_device->slot); } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } printk(MPT2SAS_WARN_FMT "\thandle(0x%04x), ioc_status(%s)(0x%04x), " "smid(%d)\n", ioc->name, le16_to_cpu(mpi_reply->DevHandle), desc_ioc_state, ioc_status, smid); printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), " "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow, scsi_get_resid(scmd)); printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), " "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag), le32_to_cpu(mpi_reply->TransferCount), scmd->result); printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), " "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status, scsi_status, desc_scsi_state, scsi_state); if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { struct sense_info data; _scsih_normalize_sense(scmd->sense_buffer, &data); printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: " "[0x%02x,0x%02x,0x%02x], count(%d)\n", ioc->name, data.skey, data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount)); } if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) { response_info = le32_to_cpu(mpi_reply->ResponseInfo); response_bytes = (u8 *)&response_info; _scsih_response_code(ioc, response_bytes[0]); } } #endif /** * _scsih_turn_on_fault_led - illuminate Fault LED * @ioc: per adapter object * @handle: device handle * Context: process * * Return nothing. */ static void _scsih_turn_on_fault_led(struct MPT2SAS_ADAPTER *ioc, u16 handle) { Mpi2SepReply_t mpi_reply; Mpi2SepRequest_t mpi_request; memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; mpi_request.SlotStatus = cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); mpi_request.DevHandle = cpu_to_le16(handle); mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, &mpi_request)) != 0) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "enclosure_processor: " "ioc_status (0x%04x), loginfo(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply.IOCStatus), le32_to_cpu(mpi_reply.IOCLogInfo))); return; } } /** * _scsih_send_event_to_turn_on_fault_led - fire delayed event * @ioc: per adapter object * @handle: device handle * Context: interrupt. * * Return nothing. */ static void _scsih_send_event_to_turn_on_fault_led(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct fw_event_work *fw_event; fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); if (!fw_event) return; fw_event->event = MPT2SAS_TURN_ON_FAULT_LED; fw_event->device_handle = handle; fw_event->ioc = ioc; _scsih_fw_event_add(ioc, fw_event); } /** * _scsih_smart_predicted_fault - process smart errors * @ioc: per adapter object * @handle: device handle * Context: interrupt. * * Return nothing. */ static void _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct scsi_target *starget; struct MPT2SAS_TARGET *sas_target_priv_data; Mpi2EventNotificationReply_t *event_reply; Mpi2EventDataSasDeviceStatusChange_t *event_data; struct _sas_device *sas_device; ssize_t sz; unsigned long flags; /* only handle non-raid devices */ spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); if (!sas_device) { spin_unlock_irqrestore(&ioc->sas_device_lock, flags); return; } starget = sas_device->starget; sas_target_priv_data = starget->hostdata; if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) || ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) { spin_unlock_irqrestore(&ioc->sas_device_lock, flags); return; } starget_printk(KERN_WARNING, starget, "predicted fault\n"); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) _scsih_send_event_to_turn_on_fault_led(ioc, handle); /* insert into event log */ sz = offsetof(Mpi2EventNotificationReply_t, EventData) + sizeof(Mpi2EventDataSasDeviceStatusChange_t); event_reply = kzalloc(sz, GFP_KERNEL); if (!event_reply) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; event_reply->Event = cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); event_reply->MsgLength = sz/4; event_reply->EventDataLength = cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4); event_data = (Mpi2EventDataSasDeviceStatusChange_t *) event_reply->EventData; event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA; event_data->ASC = 0x5D; event_data->DevHandle = cpu_to_le16(handle); event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address); mpt2sas_ctl_add_to_event_log(ioc, event_reply); kfree(event_reply); } /** * _scsih_io_done - scsi request callback * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * * Callback handler when using _scsih_qcmd. * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ static u8 _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { Mpi2SCSIIORequest_t *mpi_request; Mpi2SCSIIOReply_t *mpi_reply; struct scsi_cmnd *scmd; u16 ioc_status; u32 xfer_cnt; u8 scsi_state; u8 scsi_status; u32 log_info; struct MPT2SAS_DEVICE *sas_device_priv_data; u32 response_code = 0; unsigned long flags; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); scmd = _scsih_scsi_lookup_get_clear(ioc, smid); if (scmd == NULL) return 1; mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { scmd->result = DID_OK << 16; goto out; } sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target || sas_device_priv_data->sas_target->deleted) { scmd->result = DID_NO_CONNECT << 16; goto out; } /* * WARPDRIVE: If direct_io is set then it is directIO, * the failed direct I/O should be redirected to volume */ if (_scsih_scsi_direct_io_get(ioc, smid)) { spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); ioc->scsi_lookup[smid - 1].scmd = scmd; spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); _scsih_scsi_direct_io_set(ioc, smid, 0); memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); mpi_request->DevHandle = cpu_to_le16(sas_device_priv_data->sas_target->handle); mpt2sas_base_put_smid_scsi_io(ioc, smid, sas_device_priv_data->sas_target->handle); return 0; } /* turning off TLR */ scsi_state = mpi_reply->SCSIState; if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) response_code = le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF; if (!sas_device_priv_data->tlr_snoop_check) { sas_device_priv_data->tlr_snoop_check++; /* Make sure Device is not raid volume. * We do not expose raid functionality to upper layer for warpdrive. */ if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) && sas_is_tlr_enabled(scmd->device) && response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) { sas_disable_tlr(scmd->device); sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n"); } } xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt); ioc_status = le16_to_cpu(mpi_reply->IOCStatus); if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) log_info = le32_to_cpu(mpi_reply->IOCLogInfo); else log_info = 0; ioc_status &= MPI2_IOCSTATUS_MASK; scsi_status = mpi_reply->SCSIStatus; if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && (scsi_status == MPI2_SCSI_STATUS_BUSY || scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT || scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) { ioc_status = MPI2_IOCSTATUS_SUCCESS; } if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { struct sense_info data; const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, smid); u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, le32_to_cpu(mpi_reply->SenseCount)); memcpy(scmd->sense_buffer, sense_data, sz); _scsih_normalize_sense(scmd->sense_buffer, &data); /* failure prediction threshold exceeded */ if (data.asc == 0x5D) _scsih_smart_predicted_fault(ioc, le16_to_cpu(mpi_reply->DevHandle)); } switch (ioc_status) { case MPI2_IOCSTATUS_BUSY: case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: scmd->result = SAM_STAT_BUSY; break; case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: scmd->result = DID_NO_CONNECT << 16; break; case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: if (sas_device_priv_data->block) { scmd->result = DID_TRANSPORT_DISRUPTED << 16; goto out; } case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: scmd->result = DID_RESET << 16; break; case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt)) scmd->result = DID_SOFT_ERROR << 16; else scmd->result = (DID_OK << 16) | scsi_status; break; case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: scmd->result = (DID_OK << 16) | scsi_status; if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)) break; if (xfer_cnt < scmd->underflow) { if (scsi_status == SAM_STAT_BUSY) scmd->result = SAM_STAT_BUSY; else scmd->result = DID_SOFT_ERROR << 16; } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | MPI2_SCSI_STATE_NO_SCSI_STATUS)) scmd->result = DID_SOFT_ERROR << 16; else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) scmd->result = DID_RESET << 16; else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) { mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID; mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION; scmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; scmd->sense_buffer[0] = 0x70; scmd->sense_buffer[2] = ILLEGAL_REQUEST; scmd->sense_buffer[12] = 0x20; scmd->sense_buffer[13] = 0; } break; case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: scsi_set_resid(scmd, 0); case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: case MPI2_IOCSTATUS_SUCCESS: scmd->result = (DID_OK << 16) | scsi_status; if (response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME || (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | MPI2_SCSI_STATE_NO_SCSI_STATUS))) scmd->result = DID_SOFT_ERROR << 16; else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) scmd->result = DID_RESET << 16; break; case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: _scsih_eedp_error_handling(scmd, ioc_status); break; case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: case MPI2_IOCSTATUS_INVALID_FUNCTION: case MPI2_IOCSTATUS_INVALID_SGL: case MPI2_IOCSTATUS_INTERNAL_ERROR: case MPI2_IOCSTATUS_INVALID_FIELD: case MPI2_IOCSTATUS_INVALID_STATE: case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: default: scmd->result = DID_SOFT_ERROR << 16; break; } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY)) _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid); #endif out: scsi_dma_unmap(scmd); scmd->scsi_done(scmd); return 1; } /** * _scsih_sas_host_refresh - refreshing sas host object contents * @ioc: per adapter object * Context: user * * During port enable, fw will send topology events for every device. Its * possible that the handles may change from the previous setting, so this * code keeping handles updating if changed. * * Return nothing. */ static void _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc) { u16 sz; u16 ioc_status; int i; Mpi2ConfigReply_t mpi_reply; Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; u16 attached_handle; u8 link_rate; dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "updating handles for sas_host(0x%016llx)\n", ioc->name, (unsigned long long)ioc->sas_hba.sas_address)); sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit0PhyData_t)); sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg0) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, sas_iounit_pg0, sz)) != 0) goto out; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) goto out; for (i = 0; i < ioc->sas_hba.num_phys ; i++) { link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4; if (i == 0) ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> PhyData[0].ControllerDevHandle); ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i]. AttachedDevHandle); if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) link_rate = MPI2_SAS_NEG_LINK_RATE_1_5; mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address, attached_handle, i, link_rate); } out: kfree(sas_iounit_pg0); } /** * _scsih_sas_host_add - create sas host object * @ioc: per adapter object * * Creating host side data object, stored in ioc->sas_hba * * Return nothing. */ static void _scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc) { int i; Mpi2ConfigReply_t mpi_reply; Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; Mpi2SasPhyPage0_t phy_pg0; Mpi2SasDevicePage0_t sas_device_pg0; Mpi2SasEnclosurePage0_t enclosure_pg0; u16 ioc_status; u16 sz; u16 device_missing_delay; mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys); if (!ioc->sas_hba.num_phys) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } /* sas_iounit page 0 */ sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit0PhyData_t)); sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg0) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, sas_iounit_pg0, sz))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } /* sas_iounit page 1 */ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit1PhyData_t)); sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg1) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } ioc->io_missing_delay = le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay); device_missing_delay = le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay); if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) ioc->device_missing_delay = (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; else ioc->device_missing_delay = device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev; ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys, sizeof(struct _sas_phy), GFP_KERNEL); if (!ioc->sas_hba.phy) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } for (i = 0; i < ioc->sas_hba.num_phys ; i++) { if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, i))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } if (i == 0) ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> PhyData[0].ControllerDevHandle); ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; ioc->sas_hba.phy[i].phy_id = i; mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i], phy_pg0, ioc->sas_hba.parent_dev); } if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } ioc->sas_hba.enclosure_handle = le16_to_cpu(sas_device_pg0.EnclosureHandle); ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress); printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), " "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle, (unsigned long long) ioc->sas_hba.sas_address, ioc->sas_hba.num_phys) ; if (ioc->sas_hba.enclosure_handle) { if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, ioc->sas_hba.enclosure_handle))) { ioc->sas_hba.enclosure_logical_id = le64_to_cpu(enclosure_pg0.EnclosureLogicalID); } } out: kfree(sas_iounit_pg1); kfree(sas_iounit_pg0); } /** * _scsih_expander_add - creating expander object * @ioc: per adapter object * @handle: expander handle * * Creating expander object, stored in ioc->sas_expander_list. * * Return 0 for success, else error. */ static int _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct _sas_node *sas_expander; Mpi2ConfigReply_t mpi_reply; Mpi2ExpanderPage0_t expander_pg0; Mpi2ExpanderPage1_t expander_pg1; Mpi2SasEnclosurePage0_t enclosure_pg0; u32 ioc_status; u16 parent_handle; u64 sas_address, sas_address_parent = 0; int i; unsigned long flags; struct _sas_port *mpt2sas_port = NULL; int rc = 0; if (!handle) return -1; if (ioc->shost_recovery || ioc->pci_error_recovery) return -1; if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -1; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -1; } /* handle out of order topology events */ parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle); if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent) != 0) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -1; } if (sas_address_parent != ioc->sas_hba.sas_address) { spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, sas_address_parent); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (!sas_expander) { rc = _scsih_expander_add(ioc, parent_handle); if (rc != 0) return rc; } } spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_address = le64_to_cpu(expander_pg0.SASAddress); sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, sas_address); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (sas_expander) return 0; sas_expander = kzalloc(sizeof(struct _sas_node), GFP_KERNEL); if (!sas_expander) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -1; } sas_expander->handle = handle; sas_expander->num_phys = expander_pg0.NumPhys; sas_expander->sas_address_parent = sas_address_parent; sas_expander->sas_address = sas_address; printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x)," " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name, handle, parent_handle, (unsigned long long) sas_expander->sas_address, sas_expander->num_phys); if (!sas_expander->num_phys) goto out_fail; sas_expander->phy = kcalloc(sas_expander->num_phys, sizeof(struct _sas_phy), GFP_KERNEL); if (!sas_expander->phy) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); rc = -1; goto out_fail; } INIT_LIST_HEAD(&sas_expander->sas_port_list); mpt2sas_port = mpt2sas_transport_port_add(ioc, handle, sas_address_parent); if (!mpt2sas_port) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); rc = -1; goto out_fail; } sas_expander->parent_dev = &mpt2sas_port->rphy->dev; for (i = 0 ; i < sas_expander->num_phys ; i++) { if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply, &expander_pg1, i, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); rc = -1; goto out_fail; } sas_expander->phy[i].handle = handle; sas_expander->phy[i].phy_id = i; if ((mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i], expander_pg1, sas_expander->parent_dev))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); rc = -1; goto out_fail; } } if (sas_expander->enclosure_handle) { if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, sas_expander->enclosure_handle))) { sas_expander->enclosure_logical_id = le64_to_cpu(enclosure_pg0.EnclosureLogicalID); } } _scsih_expander_node_add(ioc, sas_expander); return 0; out_fail: if (mpt2sas_port) mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, sas_address_parent); kfree(sas_expander); return rc; } /** * _scsih_done - scsih callback handler. * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * * Callback handler when sending internal generated message frames. * The callback index passed is `ioc->scsih_cb_idx` * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ static u8 _scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { MPI2DefaultReply_t *mpi_reply; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); if (ioc->scsih_cmds.status == MPT2_CMD_NOT_USED) return 1; if (ioc->scsih_cmds.smid != smid) return 1; ioc->scsih_cmds.status |= MPT2_CMD_COMPLETE; if (mpi_reply) { memcpy(ioc->scsih_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); ioc->scsih_cmds.status |= MPT2_CMD_REPLY_VALID; } ioc->scsih_cmds.status &= ~MPT2_CMD_PENDING; complete(&ioc->scsih_cmds.done); return 1; } /** * mpt2sas_expander_remove - removing expander object * @ioc: per adapter object * @sas_address: expander sas_address * * Return nothing. */ void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) { struct _sas_node *sas_expander; unsigned long flags; if (ioc->shost_recovery) return; spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, sas_address); if (!sas_expander) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return; } list_del(&sas_expander->list); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); _scsih_expander_node_remove(ioc, sas_expander); } /** * _scsih_check_access_status - check access flags * @ioc: per adapter object * @sas_address: sas address * @handle: sas device handle * @access_flags: errors returned during discovery of the device * * Return 0 for success, else failure */ static u8 _scsih_check_access_status(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, u16 handle, u8 access_status) { u8 rc = 1; char *desc = NULL; switch (access_status) { case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS: case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION: rc = 0; break; case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED: desc = "sata capability failed"; break; case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT: desc = "sata affiliation conflict"; break; case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE: desc = "route not addressable"; break; case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE: desc = "smp error not addressable"; break; case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED: desc = "device blocked"; break; case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED: case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN: case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT: case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG: case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION: case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER: case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN: case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN: case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN: case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION: case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE: case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX: desc = "sata initialization failed"; break; default: desc = "unknown"; break; } if (!rc) return 0; printk(MPT2SAS_ERR_FMT "discovery errors(%s): sas_address(0x%016llx), " "handle(0x%04x)\n", ioc->name, desc, (unsigned long long)sas_address, handle); return rc; } static void _scsih_check_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) { Mpi2ConfigReply_t mpi_reply; Mpi2SasDevicePage0_t sas_device_pg0; struct _sas_device *sas_device; u32 ioc_status; unsigned long flags; u64 sas_address; struct scsi_target *starget; struct MPT2SAS_TARGET *sas_target_priv_data; u32 device_info; if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) return; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) return; /* check if this is end device */ device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); if (!(_scsih_is_end_device(device_info))) return; spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_address = le64_to_cpu(sas_device_pg0.SASAddress); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, sas_address); if (!sas_device) { printk(MPT2SAS_ERR_FMT "device is not present " "handle(0x%04x), no sas_device!!!\n", ioc->name, handle); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); return; } if (unlikely(sas_device->handle != handle)) { starget = sas_device->starget; sas_target_priv_data = starget->hostdata; starget_printk(KERN_INFO, starget, "handle changed from(0x%04x)" " to (0x%04x)!!!\n", sas_device->handle, handle); sas_target_priv_data->handle = handle; sas_device->handle = handle; } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); /* check if device is present */ if (!(le16_to_cpu(sas_device_pg0.Flags) & MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { printk(MPT2SAS_ERR_FMT "device is not present " "handle(0x%04x), flags!!!\n", ioc->name, handle); return; } /* check if there were any issues with discovery */ if (_scsih_check_access_status(ioc, sas_address, handle, sas_device_pg0.AccessStatus)) return; _scsih_ublock_io_device(ioc, handle); } /** * _scsih_add_device - creating sas device object * @ioc: per adapter object * @handle: sas device handle * @phy_num: phy number end device attached to * @is_pd: is this hidden raid component * * Creating end device object, stored in ioc->sas_device_list. * * Returns 0 for success, non-zero for failure. */ static int _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) { Mpi2ConfigReply_t mpi_reply; Mpi2SasDevicePage0_t sas_device_pg0; Mpi2SasEnclosurePage0_t enclosure_pg0; struct _sas_device *sas_device; u32 ioc_status; __le64 sas_address; u32 device_info; unsigned long flags; if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -1; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -1; } sas_address = le64_to_cpu(sas_device_pg0.SASAddress); /* check if device is present */ if (!(le16_to_cpu(sas_device_pg0.Flags) & MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n", ioc->name, le16_to_cpu(sas_device_pg0.Flags)); return -1; } /* check if there were any issues with discovery */ if (_scsih_check_access_status(ioc, sas_address, handle, sas_device_pg0.AccessStatus)) return -1; /* check if this is end device */ device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); if (!(_scsih_is_end_device(device_info))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -1; } spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, sas_address); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (sas_device) return 0; sas_device = kzalloc(sizeof(struct _sas_device), GFP_KERNEL); if (!sas_device) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return -1; } sas_device->handle = handle; if (_scsih_get_sas_address(ioc, le16_to_cpu (sas_device_pg0.ParentDevHandle), &sas_device->sas_address_parent) != 0) printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); sas_device->enclosure_handle = le16_to_cpu(sas_device_pg0.EnclosureHandle); sas_device->slot = le16_to_cpu(sas_device_pg0.Slot); sas_device->device_info = device_info; sas_device->sas_address = sas_address; sas_device->phy = sas_device_pg0.PhyNum; /* get enclosure_logical_id */ if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0( ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, sas_device->enclosure_handle))) sas_device->enclosure_logical_id = le64_to_cpu(enclosure_pg0.EnclosureLogicalID); /* get device name */ sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); if (ioc->wait_for_discovery_to_complete) _scsih_sas_device_init_add(ioc, sas_device); else _scsih_sas_device_add(ioc, sas_device); return 0; } /** * _scsih_remove_device - removing sas device object * @ioc: per adapter object * @sas_device_delete: the sas_device object * * Return nothing. */ static void _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, struct _sas_device *sas_device) { struct _sas_device sas_device_backup; struct MPT2SAS_TARGET *sas_target_priv_data; if (!sas_device) return; memcpy(&sas_device_backup, sas_device, sizeof(struct _sas_device)); _scsih_sas_device_remove(ioc, sas_device); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: " "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, sas_device_backup.handle, (unsigned long long) sas_device_backup.sas_address)); if (sas_device_backup.starget && sas_device_backup.starget->hostdata) { sas_target_priv_data = sas_device_backup.starget->hostdata; sas_target_priv_data->deleted = 1; } _scsih_ublock_io_device(ioc, sas_device_backup.handle); if (!ioc->hide_drives) mpt2sas_transport_port_remove(ioc, sas_device_backup.sas_address, sas_device_backup.sas_address_parent); printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr" "(0x%016llx)\n", ioc->name, sas_device_backup.handle, (unsigned long long) sas_device_backup.sas_address); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: " "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, sas_device_backup.handle, (unsigned long long) sas_device_backup.sas_address)); } /** * mpt2sas_device_remove - removing device object * @ioc: per adapter object * @sas_address: expander sas_address * * Return nothing. */ void mpt2sas_device_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) { struct _sas_device *sas_device; unsigned long flags; if (ioc->shost_recovery) return; spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, sas_address); if (!sas_device) { spin_unlock_irqrestore(&ioc->sas_device_lock, flags); return; } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); _scsih_remove_device(ioc, sas_device); } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** * _scsih_sas_topology_change_event_debug - debug for topology event * @ioc: per adapter object * @event_data: event data payload * Context: user. */ static void _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataSasTopologyChangeList_t *event_data) { int i; u16 handle; u16 reason_code; u8 phy_number; char *status_str = NULL; u8 link_rate, prev_link_rate; switch (event_data->ExpStatus) { case MPI2_EVENT_SAS_TOPO_ES_ADDED: status_str = "add"; break; case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING: status_str = "remove"; break; case MPI2_EVENT_SAS_TOPO_ES_RESPONDING: case 0: status_str = "responding"; break; case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING: status_str = "remove delay"; break; default: status_str = "unknown status"; break; } printk(MPT2SAS_INFO_FMT "sas topology change: (%s)\n", ioc->name, status_str); printk(KERN_INFO "\thandle(0x%04x), enclosure_handle(0x%04x) " "start_phy(%02d), count(%d)\n", le16_to_cpu(event_data->ExpanderDevHandle), le16_to_cpu(event_data->EnclosureHandle), event_data->StartPhyNum, event_data->NumEntries); for (i = 0; i < event_data->NumEntries; i++) { handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); if (!handle) continue; phy_number = event_data->StartPhyNum + i; reason_code = event_data->PHY[i].PhyStatus & MPI2_EVENT_SAS_TOPO_RC_MASK; switch (reason_code) { case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: status_str = "target add"; break; case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: status_str = "target remove"; break; case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING: status_str = "delay target remove"; break; case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: status_str = "link rate change"; break; case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE: status_str = "target responding"; break; default: status_str = "unknown"; break; } link_rate = event_data->PHY[i].LinkRate >> 4; prev_link_rate = event_data->PHY[i].LinkRate & 0xF; printk(KERN_INFO "\tphy(%02d), attached_handle(0x%04x): %s:" " link rate: new(0x%02x), old(0x%02x)\n", phy_number, handle, status_str, link_rate, prev_link_rate); } } #endif /** * _scsih_sas_topology_change_event - handle topology changes * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * */ static void _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { int i; u16 parent_handle, handle; u16 reason_code; u8 phy_number, max_phys; struct _sas_node *sas_expander; struct _sas_device *sas_device; u64 sas_address; unsigned long flags; u8 link_rate, prev_link_rate; Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data; #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) _scsih_sas_topology_change_event_debug(ioc, event_data); #endif if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) return; if (!ioc->sas_hba.num_phys) _scsih_sas_host_add(ioc); else _scsih_sas_host_refresh(ioc); if (fw_event->ignore) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring expander " "event\n", ioc->name)); return; } parent_handle = le16_to_cpu(event_data->ExpanderDevHandle); /* handle expander add */ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED) if (_scsih_expander_add(ioc, parent_handle) != 0) return; spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, parent_handle); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (sas_expander) { sas_address = sas_expander->sas_address; max_phys = sas_expander->num_phys; } else if (parent_handle < ioc->sas_hba.num_phys) { sas_address = ioc->sas_hba.sas_address; max_phys = ioc->sas_hba.num_phys; } else return; /* handle siblings events */ for (i = 0; i < event_data->NumEntries; i++) { if (fw_event->ignore) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring " "expander event\n", ioc->name)); return; } if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) return; phy_number = event_data->StartPhyNum + i; if (phy_number >= max_phys) continue; reason_code = event_data->PHY[i].PhyStatus & MPI2_EVENT_SAS_TOPO_RC_MASK; if ((event_data->PHY[i].PhyStatus & MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code != MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)) continue; handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); if (!handle) continue; link_rate = event_data->PHY[i].LinkRate >> 4; prev_link_rate = event_data->PHY[i].LinkRate & 0xF; switch (reason_code) { case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: if (link_rate == prev_link_rate) break; mpt2sas_transport_update_links(ioc, sas_address, handle, phy_number, link_rate); if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) break; _scsih_check_device(ioc, handle); break; case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: mpt2sas_transport_update_links(ioc, sas_address, handle, phy_number, link_rate); _scsih_add_device(ioc, handle, phy_number, 0); break; case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); if (!sas_device) { spin_unlock_irqrestore(&ioc->sas_device_lock, flags); break; } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); _scsih_remove_device(ioc, sas_device); break; } } /* handle expander removal */ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING && sas_expander) mpt2sas_expander_remove(ioc, sas_address); } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** * _scsih_sas_device_status_change_event_debug - debug for device event * @event_data: event data payload * Context: user. * * Return nothing. */ static void _scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataSasDeviceStatusChange_t *event_data) { char *reason_str = NULL; switch (event_data->ReasonCode) { case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA: reason_str = "smart data"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: reason_str = "unsupported device discovered"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: reason_str = "internal device reset"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: reason_str = "internal task abort"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: reason_str = "internal task abort set"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: reason_str = "internal clear task set"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: reason_str = "internal query task"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE: reason_str = "sata init failure"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET: reason_str = "internal device reset complete"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL: reason_str = "internal task abort complete"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION: reason_str = "internal async notification"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY: reason_str = "expander reduced functionality"; break; case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY: reason_str = "expander reduced functionality complete"; break; default: reason_str = "unknown reason"; break; } printk(MPT2SAS_INFO_FMT "device status change: (%s)\n" "\thandle(0x%04x), sas address(0x%016llx), tag(%d)", ioc->name, reason_str, le16_to_cpu(event_data->DevHandle), (unsigned long long)le64_to_cpu(event_data->SASAddress), le16_to_cpu(event_data->TaskTag)); if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA) printk(MPT2SAS_INFO_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name, event_data->ASC, event_data->ASCQ); printk(KERN_INFO "\n"); } #endif /** * _scsih_sas_device_status_change_event - handle device status change * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { struct MPT2SAS_TARGET *target_priv_data; struct _sas_device *sas_device; u64 sas_address; unsigned long flags; Mpi2EventDataSasDeviceStatusChange_t *event_data = fw_event->event_data; #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) _scsih_sas_device_status_change_event_debug(ioc, event_data); #endif /* In MPI Revision K (0xC), the internal device reset complete was * implemented, so avoid setting tm_busy flag for older firmware. */ if ((ioc->facts.HeaderVersion >> 8) < 0xC) return; if (event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET) return; spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_address = le64_to_cpu(event_data->SASAddress); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, sas_address); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (!sas_device || !sas_device->starget) return; target_priv_data = sas_device->starget->hostdata; if (!target_priv_data) return; if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET) target_priv_data->tm_busy = 1; else target_priv_data->tm_busy = 0; } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event * @ioc: per adapter object * @event_data: event data payload * Context: user. * * Return nothing. */ static void _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataSasEnclDevStatusChange_t *event_data) { char *reason_str = NULL; switch (event_data->ReasonCode) { case MPI2_EVENT_SAS_ENCL_RC_ADDED: reason_str = "enclosure add"; break; case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING: reason_str = "enclosure remove"; break; default: reason_str = "unknown reason"; break; } printk(MPT2SAS_INFO_FMT "enclosure status change: (%s)\n" "\thandle(0x%04x), enclosure logical id(0x%016llx)" " number slots(%d)\n", ioc->name, reason_str, le16_to_cpu(event_data->EnclosureHandle), (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID), le16_to_cpu(event_data->StartSlot)); } #endif /** * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) _scsih_sas_enclosure_dev_status_change_event_debug(ioc, fw_event->event_data); #endif } /** * _scsih_sas_broadcast_primative_event - handle broadcast events * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { struct scsi_cmnd *scmd; struct scsi_device *sdev; u16 smid, handle; u32 lun; struct MPT2SAS_DEVICE *sas_device_priv_data; u32 termination_count; u32 query_count; Mpi2SCSITaskManagementReply_t *mpi_reply; Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data; u16 ioc_status; unsigned long flags; int r; u8 max_retries = 0; u8 task_abort_retries; mutex_lock(&ioc->tm_cmds.mutex); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: phy number(%d), " "width(%d)\n", ioc->name, __func__, event_data->PhyNum, event_data->PortWidth)); _scsih_block_io_all_device(ioc); spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); mpi_reply = ioc->tm_cmds.reply; broadcast_aen_retry: /* sanity checks for retrying this loop */ if (max_retries++ == 5) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: giving up\n", ioc->name, __func__)); goto out; } else if (max_retries > 1) dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %d retry\n", ioc->name, __func__, max_retries - 1)); termination_count = 0; query_count = 0; for (smid = 1; smid <= ioc->scsiio_depth; smid++) { if (ioc->shost_recovery) goto out; scmd = _scsih_scsi_lookup_get(ioc, smid); if (!scmd) continue; sdev = scmd->device; sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) continue; /* skip hidden raid components */ if (sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) continue; /* skip volumes */ if (sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) continue; handle = sas_device_priv_data->sas_target->handle; lun = sas_device_priv_data->lun; query_count++; if (ioc->shost_recovery) goto out; spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); r = mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun, MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, 0, TM_MUTEX_OFF); if (r == FAILED) { sdev_printk(KERN_WARNING, sdev, "mpt2sas_scsih_issue_tm: FAILED when sending " "QUERY_TASK: scmd(%p)\n", scmd); spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); goto broadcast_aen_retry; } ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { sdev_printk(KERN_WARNING, sdev, "query task: FAILED " "with IOCSTATUS(0x%04x), scmd(%p)\n", ioc_status, scmd); spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); goto broadcast_aen_retry; } /* see if IO is still owned by IOC and target */ if (mpi_reply->ResponseCode == MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED || mpi_reply->ResponseCode == MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) { spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); continue; } task_abort_retries = 0; tm_retry: if (task_abort_retries++ == 60) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ABORT_TASK: giving up\n", ioc->name, __func__)); spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); goto broadcast_aen_retry; } if (ioc->shost_recovery) goto out_no_lock; r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id, sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, scmd->serial_number, TM_MUTEX_OFF); if (r == FAILED) { sdev_printk(KERN_WARNING, sdev, "mpt2sas_scsih_issue_tm: ABORT_TASK: FAILED : " "scmd(%p)\n", scmd); goto tm_retry; } if (task_abort_retries > 1) sdev_printk(KERN_WARNING, sdev, "mpt2sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):" " scmd(%p)\n", task_abort_retries - 1, scmd); termination_count += le32_to_cpu(mpi_reply->TerminationCount); spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); } if (ioc->broadcast_aen_pending) { dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: loop back due to" " pending AEN\n", ioc->name, __func__)); ioc->broadcast_aen_pending = 0; goto broadcast_aen_retry; } out: spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); out_no_lock: dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s - exit, query_count = %d termination_count = %d\n", ioc->name, __func__, query_count, termination_count)); ioc->broadcast_aen_busy = 0; if (!ioc->shost_recovery) _scsih_ublock_io_all_device(ioc); mutex_unlock(&ioc->tm_cmds.mutex); } /** * _scsih_sas_discovery_event - handle discovery events * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { Mpi2EventDataSasDiscovery_t *event_data = fw_event->event_data; #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) { printk(MPT2SAS_INFO_FMT "discovery event: (%s)", ioc->name, (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? "start" : "stop"); if (event_data->DiscoveryStatus) printk("discovery_status(0x%08x)", le32_to_cpu(event_data->DiscoveryStatus)); printk("\n"); } #endif if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED && !ioc->sas_hba.num_phys) _scsih_sas_host_add(ioc); } /** * _scsih_reprobe_lun - reprobing lun * @sdev: scsi device struct * @no_uld_attach: sdev->no_uld_attach flag setting * **/ static void _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach) { int rc; sdev->no_uld_attach = no_uld_attach ? 1 : 0; sdev_printk(KERN_INFO, sdev, "%s raid component\n", sdev->no_uld_attach ? "hidding" : "exposing"); rc = scsi_device_reprobe(sdev); } /** * _scsih_reprobe_target - reprobing target * @starget: scsi target struct * @no_uld_attach: sdev->no_uld_attach flag setting * * Note: no_uld_attach flag determines whether the disk device is attached * to block layer. A value of `1` means to not attach. **/ static void _scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach) { struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata; if (no_uld_attach) sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT; else sas_target_priv_data->flags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT; starget_for_each_device(starget, no_uld_attach ? (void *)1 : NULL, _scsih_reprobe_lun); } /** * _scsih_sas_volume_add - add new volume * @ioc: per adapter object * @element: IR config element data * Context: user. * * Return nothing. */ static void _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc, Mpi2EventIrConfigElement_t *element) { struct _raid_device *raid_device; unsigned long flags; u64 wwid; u16 handle = le16_to_cpu(element->VolDevHandle); int rc; mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); if (!wwid) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (raid_device) return; raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); if (!raid_device) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } raid_device->id = ioc->sas_id++; raid_device->channel = RAID_CHANNEL; raid_device->handle = handle; raid_device->wwid = wwid; _scsih_raid_device_add(ioc, raid_device); if (!ioc->wait_for_discovery_to_complete) { rc = scsi_add_device(ioc->shost, RAID_CHANNEL, raid_device->id, 0); if (rc) _scsih_raid_device_remove(ioc, raid_device); } else _scsih_determine_boot_device(ioc, raid_device, 1); } /** * _scsih_sas_volume_delete - delete volume * @ioc: per adapter object * @handle: volume device handle * Context: user. * * Return nothing. */ static void _scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, u16 handle) { struct _raid_device *raid_device; unsigned long flags; struct MPT2SAS_TARGET *sas_target_priv_data; spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (!raid_device) return; if (raid_device->starget) { sas_target_priv_data = raid_device->starget->hostdata; sas_target_priv_data->deleted = 1; scsi_remove_target(&raid_device->starget->dev); } printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid" "(0x%016llx)\n", ioc->name, raid_device->handle, (unsigned long long) raid_device->wwid); _scsih_raid_device_remove(ioc, raid_device); } /** * _scsih_sas_pd_expose - expose pd component to /dev/sdX * @ioc: per adapter object * @element: IR config element data * Context: user. * * Return nothing. */ static void _scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc, Mpi2EventIrConfigElement_t *element) { struct _sas_device *sas_device; unsigned long flags; u16 handle = le16_to_cpu(element->PhysDiskDevHandle); spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (!sas_device) return; /* exposing raid component */ sas_device->volume_handle = 0; sas_device->volume_wwid = 0; clear_bit(handle, ioc->pd_handles); _scsih_reprobe_target(sas_device->starget, 0); } /** * _scsih_sas_pd_hide - hide pd component from /dev/sdX * @ioc: per adapter object * @element: IR config element data * Context: user. * * Return nothing. */ static void _scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc, Mpi2EventIrConfigElement_t *element) { struct _sas_device *sas_device; unsigned long flags; u16 handle = le16_to_cpu(element->PhysDiskDevHandle); spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (!sas_device) return; /* hiding raid component */ mpt2sas_config_get_volume_handle(ioc, handle, &sas_device->volume_handle); mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle, &sas_device->volume_wwid); set_bit(handle, ioc->pd_handles); _scsih_reprobe_target(sas_device->starget, 1); } /** * _scsih_sas_pd_delete - delete pd component * @ioc: per adapter object * @element: IR config element data * Context: user. * * Return nothing. */ static void _scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc, Mpi2EventIrConfigElement_t *element) { struct _sas_device *sas_device; unsigned long flags; u16 handle = le16_to_cpu(element->PhysDiskDevHandle); spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (!sas_device) return; _scsih_remove_device(ioc, sas_device); } /** * _scsih_sas_pd_add - remove pd component * @ioc: per adapter object * @element: IR config element data * Context: user. * * Return nothing. */ static void _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc, Mpi2EventIrConfigElement_t *element) { struct _sas_device *sas_device; unsigned long flags; u16 handle = le16_to_cpu(element->PhysDiskDevHandle); Mpi2ConfigReply_t mpi_reply; Mpi2SasDevicePage0_t sas_device_pg0; u32 ioc_status; u64 sas_address; u16 parent_handle; set_bit(handle, ioc->pd_handles); spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (sas_device) return; if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) mpt2sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); _scsih_add_device(ioc, handle, 0, 1); } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events * @ioc: per adapter object * @event_data: event data payload * Context: user. * * Return nothing. */ static void _scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataIrConfigChangeList_t *event_data) { Mpi2EventIrConfigElement_t *element; u8 element_type; int i; char *reason_str = NULL, *element_str = NULL; element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; printk(MPT2SAS_INFO_FMT "raid config change: (%s), elements(%d)\n", ioc->name, (le32_to_cpu(event_data->Flags) & MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? "foreign" : "native", event_data->NumElements); for (i = 0; i < event_data->NumElements; i++, element++) { switch (element->ReasonCode) { case MPI2_EVENT_IR_CHANGE_RC_ADDED: reason_str = "add"; break; case MPI2_EVENT_IR_CHANGE_RC_REMOVED: reason_str = "remove"; break; case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE: reason_str = "no change"; break; case MPI2_EVENT_IR_CHANGE_RC_HIDE: reason_str = "hide"; break; case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: reason_str = "unhide"; break; case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: reason_str = "volume_created"; break; case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: reason_str = "volume_deleted"; break; case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: reason_str = "pd_created"; break; case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: reason_str = "pd_deleted"; break; default: reason_str = "unknown reason"; break; } element_type = le16_to_cpu(element->ElementFlags) & MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK; switch (element_type) { case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT: element_str = "volume"; break; case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT: element_str = "phys disk"; break; case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT: element_str = "hot spare"; break; default: element_str = "unknown element"; break; } printk(KERN_INFO "\t(%s:%s), vol handle(0x%04x), " "pd handle(0x%04x), pd num(0x%02x)\n", element_str, reason_str, le16_to_cpu(element->VolDevHandle), le16_to_cpu(element->PhysDiskDevHandle), element->PhysDiskNum); } } #endif /** * _scsih_sas_ir_config_change_event - handle ir configuration change events * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { Mpi2EventIrConfigElement_t *element; int i; u8 foreign_config; Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data; #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) && !ioc->hide_ir_msg) _scsih_sas_ir_config_change_event_debug(ioc, event_data); #endif if (ioc->shost_recovery) return; foreign_config = (le32_to_cpu(event_data->Flags) & MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0; element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; for (i = 0; i < event_data->NumElements; i++, element++) { switch (element->ReasonCode) { case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: case MPI2_EVENT_IR_CHANGE_RC_ADDED: if (!foreign_config) _scsih_sas_volume_add(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: case MPI2_EVENT_IR_CHANGE_RC_REMOVED: if (!foreign_config) _scsih_sas_volume_delete(ioc, le16_to_cpu(element->VolDevHandle)); break; case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: if (!ioc->is_warpdrive) _scsih_sas_pd_hide(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: if (!ioc->is_warpdrive) _scsih_sas_pd_expose(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_HIDE: if (!ioc->is_warpdrive) _scsih_sas_pd_add(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: if (!ioc->is_warpdrive) _scsih_sas_pd_delete(ioc, element); break; } } } /** * _scsih_sas_ir_volume_event - IR volume event * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { u64 wwid; unsigned long flags; struct _raid_device *raid_device; u16 handle; u32 state; int rc; Mpi2EventDataIrVolume_t *event_data = fw_event->event_data; if (ioc->shost_recovery) return; if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) return; handle = le16_to_cpu(event_data->VolDevHandle); state = le32_to_cpu(event_data->NewValue); if (!ioc->hide_ir_msg) dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), " "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, le32_to_cpu(event_data->PreviousValue), state)); switch (state) { case MPI2_RAID_VOL_STATE_MISSING: case MPI2_RAID_VOL_STATE_FAILED: _scsih_sas_volume_delete(ioc, handle); break; case MPI2_RAID_VOL_STATE_ONLINE: case MPI2_RAID_VOL_STATE_DEGRADED: case MPI2_RAID_VOL_STATE_OPTIMAL: spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (raid_device) break; mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); if (!wwid) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); break; } raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); if (!raid_device) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); break; } raid_device->id = ioc->sas_id++; raid_device->channel = RAID_CHANNEL; raid_device->handle = handle; raid_device->wwid = wwid; _scsih_raid_device_add(ioc, raid_device); rc = scsi_add_device(ioc->shost, RAID_CHANNEL, raid_device->id, 0); if (rc) _scsih_raid_device_remove(ioc, raid_device); break; case MPI2_RAID_VOL_STATE_INITIALIZING: default: break; } } /** * _scsih_sas_ir_physical_disk_event - PD event * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { u16 handle, parent_handle; u32 state; struct _sas_device *sas_device; unsigned long flags; Mpi2ConfigReply_t mpi_reply; Mpi2SasDevicePage0_t sas_device_pg0; u32 ioc_status; Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data; u64 sas_address; if (ioc->shost_recovery) return; if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) return; handle = le16_to_cpu(event_data->PhysDiskDevHandle); state = le32_to_cpu(event_data->NewValue); if (!ioc->hide_ir_msg) dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), " "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, le32_to_cpu(event_data->PreviousValue), state)); switch (state) { case MPI2_RAID_PD_STATE_ONLINE: case MPI2_RAID_PD_STATE_DEGRADED: case MPI2_RAID_PD_STATE_REBUILDING: case MPI2_RAID_PD_STATE_OPTIMAL: case MPI2_RAID_PD_STATE_HOT_SPARE: if (!ioc->is_warpdrive) set_bit(handle, ioc->pd_handles); spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (sas_device) return; if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) mpt2sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); _scsih_add_device(ioc, handle, 0, 1); break; case MPI2_RAID_PD_STATE_OFFLINE: case MPI2_RAID_PD_STATE_NOT_CONFIGURED: case MPI2_RAID_PD_STATE_NOT_COMPATIBLE: default: break; } } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** * _scsih_sas_ir_operation_status_event_debug - debug for IR op event * @ioc: per adapter object * @event_data: event data payload * Context: user. * * Return nothing. */ static void _scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataIrOperationStatus_t *event_data) { char *reason_str = NULL; switch (event_data->RAIDOperation) { case MPI2_EVENT_IR_RAIDOP_RESYNC: reason_str = "resync"; break; case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION: reason_str = "online capacity expansion"; break; case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK: reason_str = "consistency check"; break; case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT: reason_str = "background init"; break; case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT: reason_str = "make data consistent"; break; } if (!reason_str) return; printk(MPT2SAS_INFO_FMT "raid operational status: (%s)" "\thandle(0x%04x), percent complete(%d)\n", ioc->name, reason_str, le16_to_cpu(event_data->VolDevHandle), event_data->PercentComplete); } #endif /** * _scsih_sas_ir_operation_status_event - handle RAID operation events * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { Mpi2EventDataIrOperationStatus_t *event_data = fw_event->event_data; static struct _raid_device *raid_device; unsigned long flags; u16 handle; #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) && !ioc->hide_ir_msg) _scsih_sas_ir_operation_status_event_debug(ioc, event_data); #endif /* code added for raid transport support */ if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) { handle = le16_to_cpu(event_data->VolDevHandle); spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (!raid_device) return; if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) raid_device->percent_complete = event_data->PercentComplete; } } /** * _scsih_prep_device_scan - initialize parameters prior to device scan * @ioc: per adapter object * * Set the deleted flag prior to device scan. If the device is found during * the scan, then we clear the deleted flag. */ static void _scsih_prep_device_scan(struct MPT2SAS_ADAPTER *ioc) { struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_device *sdev; shost_for_each_device(sdev, ioc->shost) { sas_device_priv_data = sdev->hostdata; if (sas_device_priv_data && sas_device_priv_data->sas_target) sas_device_priv_data->sas_target->deleted = 1; } } /** * _scsih_mark_responding_sas_device - mark a sas_devices as responding * @ioc: per adapter object * @sas_address: sas address * @slot: enclosure slot id * @handle: device handle * * After host reset, find out whether devices are still responding. * Used in _scsi_remove_unresponsive_sas_devices. * * Return nothing. */ static void _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, u16 slot, u16 handle) { struct MPT2SAS_TARGET *sas_target_priv_data = NULL; struct scsi_target *starget; struct _sas_device *sas_device; unsigned long flags; spin_lock_irqsave(&ioc->sas_device_lock, flags); list_for_each_entry(sas_device, &ioc->sas_device_list, list) { if (sas_device->sas_address == sas_address && sas_device->slot == slot) { sas_device->responding = 1; starget = sas_device->starget; if (starget && starget->hostdata) { sas_target_priv_data = starget->hostdata; sas_target_priv_data->tm_busy = 0; sas_target_priv_data->deleted = 0; } else sas_target_priv_data = NULL; if (starget) starget_printk(KERN_INFO, starget, "handle(0x%04x), sas_addr(0x%016llx), " "enclosure logical id(0x%016llx), " "slot(%d)\n", handle, (unsigned long long)sas_device->sas_address, (unsigned long long) sas_device->enclosure_logical_id, sas_device->slot); if (sas_device->handle == handle) goto out; printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", sas_device->handle); sas_device->handle = handle; if (sas_target_priv_data) sas_target_priv_data->handle = handle; goto out; } } out: spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } /** * _scsih_search_responding_sas_devices - * @ioc: per adapter object * * After host reset, find out whether devices are still responding. * If not remove. * * Return nothing. */ static void _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc) { Mpi2SasDevicePage0_t sas_device_pg0; Mpi2ConfigReply_t mpi_reply; u16 ioc_status; __le64 sas_address; u16 handle; u32 device_info; u16 slot; printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name); if (list_empty(&ioc->sas_device_list)) goto out; handle = 0xFFFF; while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; handle = le16_to_cpu(sas_device_pg0.DevHandle); device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); if (!(_scsih_is_end_device(device_info))) continue; sas_address = le64_to_cpu(sas_device_pg0.SASAddress); slot = le16_to_cpu(sas_device_pg0.Slot); _scsih_mark_responding_sas_device(ioc, sas_address, slot, handle); } out: printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n", ioc->name); } /** * _scsih_mark_responding_raid_device - mark a raid_device as responding * @ioc: per adapter object * @wwid: world wide identifier for raid volume * @handle: device handle * * After host reset, find out whether devices are still responding. * Used in _scsi_remove_unresponsive_raid_devices. * * Return nothing. */ static void _scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid, u16 handle) { struct MPT2SAS_TARGET *sas_target_priv_data; struct scsi_target *starget; struct _raid_device *raid_device; unsigned long flags; spin_lock_irqsave(&ioc->raid_device_lock, flags); list_for_each_entry(raid_device, &ioc->raid_device_list, list) { if (raid_device->wwid == wwid && raid_device->starget) { starget = raid_device->starget; if (starget && starget->hostdata) { sas_target_priv_data = starget->hostdata; sas_target_priv_data->deleted = 0; } else sas_target_priv_data = NULL; raid_device->responding = 1; starget_printk(KERN_INFO, raid_device->starget, "handle(0x%04x), wwid(0x%016llx)\n", handle, (unsigned long long)raid_device->wwid); /* * WARPDRIVE: The handles of the PDs might have changed * across the host reset so re-initialize the * required data for Direct IO */ _scsih_init_warpdrive_properties(ioc, raid_device); if (raid_device->handle == handle) goto out; printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", raid_device->handle); raid_device->handle = handle; if (sas_target_priv_data) sas_target_priv_data->handle = handle; goto out; } } out: spin_unlock_irqrestore(&ioc->raid_device_lock, flags); } /** * _scsih_search_responding_raid_devices - * @ioc: per adapter object * * After host reset, find out whether devices are still responding. * If not remove. * * Return nothing. */ static void _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc) { Mpi2RaidVolPage1_t volume_pg1; Mpi2RaidVolPage0_t volume_pg0; Mpi2RaidPhysDiskPage0_t pd_pg0; Mpi2ConfigReply_t mpi_reply; u16 ioc_status; u16 handle; u8 phys_disk_num; if (!ioc->ir_firmware) return; printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n", ioc->name); if (list_empty(&ioc->raid_device_list)) goto out; handle = 0xFFFF; while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; handle = le16_to_cpu(volume_pg1.DevHandle); if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, sizeof(Mpi2RaidVolPage0_t))) continue; if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) _scsih_mark_responding_raid_device(ioc, le64_to_cpu(volume_pg1.WWID), handle); } /* refresh the pd_handles */ if (!ioc->is_warpdrive) { phys_disk_num = 0xFF; memset(ioc->pd_handles, 0, ioc->pd_handles_sz); while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM, phys_disk_num))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; phys_disk_num = pd_pg0.PhysDiskNum; handle = le16_to_cpu(pd_pg0.DevHandle); set_bit(handle, ioc->pd_handles); } } out: printk(MPT2SAS_INFO_FMT "search for responding raid volumes: " "complete\n", ioc->name); } /** * _scsih_mark_responding_expander - mark a expander as responding * @ioc: per adapter object * @sas_address: sas address * @handle: * * After host reset, find out whether devices are still responding. * Used in _scsi_remove_unresponsive_expanders. * * Return nothing. */ static void _scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, u16 handle) { struct _sas_node *sas_expander; unsigned long flags; int i; spin_lock_irqsave(&ioc->sas_node_lock, flags); list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { if (sas_expander->sas_address != sas_address) continue; sas_expander->responding = 1; if (sas_expander->handle == handle) goto out; printk(KERN_INFO "\texpander(0x%016llx): handle changed" " from(0x%04x) to (0x%04x)!!!\n", (unsigned long long)sas_expander->sas_address, sas_expander->handle, handle); sas_expander->handle = handle; for (i = 0 ; i < sas_expander->num_phys ; i++) sas_expander->phy[i].handle = handle; goto out; } out: spin_unlock_irqrestore(&ioc->sas_node_lock, flags); } /** * _scsih_search_responding_expanders - * @ioc: per adapter object * * After host reset, find out whether devices are still responding. * If not remove. * * Return nothing. */ static void _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc) { Mpi2ExpanderPage0_t expander_pg0; Mpi2ConfigReply_t mpi_reply; u16 ioc_status; u64 sas_address; u16 handle; printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name); if (list_empty(&ioc->sas_expander_list)) goto out; handle = 0xFFFF; while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; handle = le16_to_cpu(expander_pg0.DevHandle); sas_address = le64_to_cpu(expander_pg0.SASAddress); printk(KERN_INFO "\texpander present: handle(0x%04x), " "sas_addr(0x%016llx)\n", handle, (unsigned long long)sas_address); _scsih_mark_responding_expander(ioc, sas_address, handle); } out: printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name); } /** * _scsih_remove_unresponding_sas_devices - removing unresponding devices * @ioc: per adapter object * * Return nothing. */ static void _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc) { struct _sas_device *sas_device, *sas_device_next; struct _sas_node *sas_expander; struct _raid_device *raid_device, *raid_device_next; printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n", ioc->name); list_for_each_entry_safe(sas_device, sas_device_next, &ioc->sas_device_list, list) { if (sas_device->responding) { sas_device->responding = 0; continue; } if (sas_device->starget) starget_printk(KERN_INFO, sas_device->starget, "removing: handle(0x%04x), sas_addr(0x%016llx), " "enclosure logical id(0x%016llx), slot(%d)\n", sas_device->handle, (unsigned long long)sas_device->sas_address, (unsigned long long) sas_device->enclosure_logical_id, sas_device->slot); _scsih_remove_device(ioc, sas_device); } if (!ioc->ir_firmware) goto retry_expander_search; list_for_each_entry_safe(raid_device, raid_device_next, &ioc->raid_device_list, list) { if (raid_device->responding) { raid_device->responding = 0; continue; } if (raid_device->starget) { starget_printk(KERN_INFO, raid_device->starget, "removing: handle(0x%04x), wwid(0x%016llx)\n", raid_device->handle, (unsigned long long)raid_device->wwid); scsi_remove_target(&raid_device->starget->dev); } _scsih_raid_device_remove(ioc, raid_device); } retry_expander_search: sas_expander = NULL; list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { if (sas_expander->responding) { sas_expander->responding = 0; continue; } mpt2sas_expander_remove(ioc, sas_expander->sas_address); goto retry_expander_search; } printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n", ioc->name); /* unblock devices */ _scsih_ublock_io_all_device(ioc); } static void _scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_expander, u16 handle) { Mpi2ExpanderPage1_t expander_pg1; Mpi2ConfigReply_t mpi_reply; int i; for (i = 0 ; i < sas_expander->num_phys ; i++) { if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply, &expander_pg1, i, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return; } mpt2sas_transport_update_links(ioc, sas_expander->sas_address, le16_to_cpu(expander_pg1.AttachedDevHandle), i, expander_pg1.NegotiatedLinkRate >> 4); } } /** * _scsih_scan_for_devices_after_reset - scan for devices after host reset * @ioc: per adapter object * * Return nothing. */ static void _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) { Mpi2ExpanderPage0_t expander_pg0; Mpi2SasDevicePage0_t sas_device_pg0; Mpi2RaidVolPage1_t volume_pg1; Mpi2RaidVolPage0_t volume_pg0; Mpi2RaidPhysDiskPage0_t pd_pg0; Mpi2EventIrConfigElement_t element; Mpi2ConfigReply_t mpi_reply; u8 phys_disk_num; u16 ioc_status; u16 handle, parent_handle; u64 sas_address; struct _sas_device *sas_device; struct _sas_node *expander_device; static struct _raid_device *raid_device; printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name); _scsih_sas_host_refresh(ioc); /* expanders */ handle = 0xFFFF; while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; handle = le16_to_cpu(expander_pg0.DevHandle); expander_device = mpt2sas_scsih_expander_find_by_sas_address( ioc, le64_to_cpu(expander_pg0.SASAddress)); if (expander_device) _scsih_refresh_expander_links(ioc, expander_device, handle); else _scsih_expander_add(ioc, handle); } if (!ioc->ir_firmware) goto skip_to_sas; /* phys disk */ phys_disk_num = 0xFF; while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM, phys_disk_num))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; phys_disk_num = pd_pg0.PhysDiskNum; handle = le16_to_cpu(pd_pg0.DevHandle); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); if (sas_device) continue; if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle) != 0) continue; parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) { mpt2sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); set_bit(handle, ioc->pd_handles); _scsih_add_device(ioc, handle, 0, 1); } } /* volumes */ handle = 0xFFFF; while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; handle = le16_to_cpu(volume_pg1.DevHandle); raid_device = _scsih_raid_device_find_by_wwid(ioc, le64_to_cpu(volume_pg1.WWID)); if (raid_device) continue; if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, sizeof(Mpi2RaidVolPage0_t))) continue; if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t)); element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED; element.VolDevHandle = volume_pg1.DevHandle; _scsih_sas_volume_add(ioc, &element); } } skip_to_sas: /* sas devices */ handle = 0xFFFF; while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) break; handle = le16_to_cpu(sas_device_pg0.DevHandle); if (!(_scsih_is_end_device( le32_to_cpu(sas_device_pg0.DeviceInfo)))) continue; sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, le64_to_cpu(sas_device_pg0.SASAddress)); if (sas_device) continue; parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) { mpt2sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); _scsih_add_device(ioc, handle, 0, 0); } } printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name); } /** * mpt2sas_scsih_reset_handler - reset callback handler (for scsih) * @ioc: per adapter object * @reset_phase: phase * * The handler for doing any required cleanup or initialization. * * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, * MPT2_IOC_DONE_RESET * * Return nothing. */ void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) { switch (reset_phase) { case MPT2_IOC_PRE_RESET: dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); break; case MPT2_IOC_AFTER_RESET: dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); if (ioc->scsih_cmds.status & MPT2_CMD_PENDING) { ioc->scsih_cmds.status |= MPT2_CMD_RESET; mpt2sas_base_free_smid(ioc, ioc->scsih_cmds.smid); complete(&ioc->scsih_cmds.done); } if (ioc->tm_cmds.status & MPT2_CMD_PENDING) { ioc->tm_cmds.status |= MPT2_CMD_RESET; mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid); complete(&ioc->tm_cmds.done); } _scsih_fw_event_cleanup_queue(ioc); _scsih_flush_running_cmds(ioc); break; case MPT2_IOC_DONE_RESET: dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); _scsih_sas_host_refresh(ioc); _scsih_prep_device_scan(ioc); _scsih_search_responding_sas_devices(ioc); _scsih_search_responding_raid_devices(ioc); _scsih_search_responding_expanders(ioc); _scsih_error_recovery_delete_devices(ioc); break; } } /** * _firmware_event_work - delayed task for processing firmware events * @ioc: per adapter object * @work: equal to the fw_event_work object * Context: user. * * Return nothing. */ static void _firmware_event_work(struct work_struct *work) { struct fw_event_work *fw_event = container_of(work, struct fw_event_work, delayed_work.work); struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; /* the queue is being flushed so ignore this event */ if (ioc->remove_host || fw_event->cancel_pending_work || ioc->pci_error_recovery) { _scsih_fw_event_free(ioc, fw_event); return; } switch (fw_event->event) { case MPT2SAS_REMOVE_UNRESPONDING_DEVICES: while (scsi_host_in_recovery(ioc->shost)) ssleep(1); _scsih_remove_unresponding_sas_devices(ioc); _scsih_scan_for_devices_after_reset(ioc); break; case MPT2SAS_PORT_ENABLE_COMPLETE: if (!ioc->is_driver_loading && ioc->shost_recovery) { _scsih_prep_device_scan(ioc); _scsih_search_responding_sas_devices(ioc); _scsih_search_responding_raid_devices(ioc); _scsih_search_responding_expanders(ioc); } if (ioc->start_scan) ioc->start_scan = 0; else complete(&ioc->port_enable_done); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete " "from worker thread\n", ioc->name)); break; case MPT2SAS_TURN_ON_FAULT_LED: _scsih_turn_on_fault_led(ioc, fw_event->device_handle); break; case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: _scsih_sas_topology_change_event(ioc, fw_event); break; case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: _scsih_sas_device_status_change_event(ioc, fw_event); break; case MPI2_EVENT_SAS_DISCOVERY: _scsih_sas_discovery_event(ioc, fw_event); break; case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: _scsih_sas_broadcast_primative_event(ioc, fw_event); break; case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: _scsih_sas_enclosure_dev_status_change_event(ioc, fw_event); break; case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: _scsih_sas_ir_config_change_event(ioc, fw_event); break; case MPI2_EVENT_IR_VOLUME: _scsih_sas_ir_volume_event(ioc, fw_event); break; case MPI2_EVENT_IR_PHYSICAL_DISK: _scsih_sas_ir_physical_disk_event(ioc, fw_event); break; case MPI2_EVENT_IR_OPERATION_STATUS: _scsih_sas_ir_operation_status_event(ioc, fw_event); break; } _scsih_fw_event_free(ioc, fw_event); } /** * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time) * @ioc: per adapter object * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: interrupt. * * This function merely adds a new work task into ioc->firmware_event_thread. * The tasks are worked from _firmware_event_work in user context. * * Return 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply) { struct fw_event_work *fw_event; Mpi2EventNotificationReply_t *mpi_reply; u16 event; u16 sz; /* events turned off due to host reset or driver unloading */ if (ioc->remove_host || ioc->pci_error_recovery) return 1; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); event = le16_to_cpu(mpi_reply->Event); switch (event) { /* handle these */ case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: { Mpi2EventDataSasBroadcastPrimitive_t *baen_data = (Mpi2EventDataSasBroadcastPrimitive_t *) mpi_reply->EventData; if (baen_data->Primitive != MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT) return 1; if (ioc->broadcast_aen_busy) { ioc->broadcast_aen_pending++; return 1; } else ioc->broadcast_aen_busy = 1; break; } case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: _scsih_check_topo_delete_events(ioc, (Mpi2EventDataSasTopologyChangeList_t *) mpi_reply->EventData); break; case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: _scsih_check_ir_config_unhide_events(ioc, (Mpi2EventDataIrConfigChangeList_t *) mpi_reply->EventData); break; case MPI2_EVENT_IR_VOLUME: _scsih_check_volume_delete_events(ioc, (Mpi2EventDataIrVolume_t *) mpi_reply->EventData); break; case MPI2_EVENT_LOG_ENTRY_ADDED: { Mpi2EventDataLogEntryAdded_t *log_entry; u32 *log_code; if (!ioc->is_warpdrive) break; log_entry = (Mpi2EventDataLogEntryAdded_t *) mpi_reply->EventData; log_code = (u32 *)log_entry->LogData; if (le16_to_cpu(log_entry->LogEntryQualifier) != MPT2_WARPDRIVE_LOGENTRY) break; switch (le32_to_cpu(*log_code)) { case MPT2_WARPDRIVE_LC_SSDT: printk(MPT2SAS_WARN_FMT "WarpDrive Warning: " "IO Throttling has occurred in the WarpDrive " "subsystem. Check WarpDrive documentation for " "additional details.\n", ioc->name); break; case MPT2_WARPDRIVE_LC_SSDLW: printk(MPT2SAS_WARN_FMT "WarpDrive Warning: " "Program/Erase Cycles for the WarpDrive subsystem " "in degraded range. Check WarpDrive documentation " "for additional details.\n", ioc->name); break; case MPT2_WARPDRIVE_LC_SSDLF: printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: " "There are no Program/Erase Cycles for the " "WarpDrive subsystem. The storage device will be " "in read-only mode. Check WarpDrive documentation " "for additional details.\n", ioc->name); break; case MPT2_WARPDRIVE_LC_BRMF: printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: " "The Backup Rail Monitor has failed on the " "WarpDrive subsystem. Check WarpDrive " "documentation for additional details.\n", ioc->name); break; } break; } case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: case MPI2_EVENT_IR_OPERATION_STATUS: case MPI2_EVENT_SAS_DISCOVERY: case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: case MPI2_EVENT_IR_PHYSICAL_DISK: break; default: /* ignore the rest */ return 1; } fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); if (!fw_event) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); return 1; } sz = le16_to_cpu(mpi_reply->EventDataLength) * 4; fw_event->event_data = kzalloc(sz, GFP_ATOMIC); if (!fw_event->event_data) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); kfree(fw_event); return 1; } memcpy(fw_event->event_data, mpi_reply->EventData, sz); fw_event->ioc = ioc; fw_event->VF_ID = mpi_reply->VF_ID; fw_event->VP_ID = mpi_reply->VP_ID; fw_event->event = event; _scsih_fw_event_add(ioc, fw_event); return 1; } /* shost template */ static struct scsi_host_template scsih_driver_template = { .module = THIS_MODULE, .name = "Fusion MPT SAS Host", .proc_name = MPT2SAS_DRIVER_NAME, .queuecommand = _scsih_qcmd, .target_alloc = _scsih_target_alloc, .slave_alloc = _scsih_slave_alloc, .slave_configure = _scsih_slave_configure, .target_destroy = _scsih_target_destroy, .slave_destroy = _scsih_slave_destroy, .scan_finished = _scsih_scan_finished, .scan_start = _scsih_scan_start, .change_queue_depth = _scsih_change_queue_depth, .change_queue_type = _scsih_change_queue_type, .eh_abort_handler = _scsih_abort, .eh_device_reset_handler = _scsih_dev_reset, .eh_target_reset_handler = _scsih_target_reset, .eh_host_reset_handler = _scsih_host_reset, .bios_param = _scsih_bios_param, .can_queue = 1, .this_id = -1, .sg_tablesize = MPT2SAS_SG_DEPTH, .max_sectors = 8192, .cmd_per_lun = 7, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = mpt2sas_host_attrs, .sdev_attrs = mpt2sas_dev_attrs, }; /** * _scsih_expander_node_remove - removing expander device from list. * @ioc: per adapter object * @sas_expander: the sas_device object * Context: Calling function should acquire ioc->sas_node_lock. * * Removing object and freeing associated memory from the * ioc->sas_expander_list. * * Return nothing. */ static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_expander) { struct _sas_port *mpt2sas_port, *next; /* remove sibling ports attached to this expander */ list_for_each_entry_safe(mpt2sas_port, next, &sas_expander->sas_port_list, port_list) { if (ioc->shost_recovery) return; if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE) mpt2sas_device_remove(ioc, mpt2sas_port->remote_identify.sas_address); else if (mpt2sas_port->remote_identify.device_type == SAS_EDGE_EXPANDER_DEVICE || mpt2sas_port->remote_identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) mpt2sas_expander_remove(ioc, mpt2sas_port->remote_identify.sas_address); } mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, sas_expander->sas_address_parent); printk(MPT2SAS_INFO_FMT "expander_remove: handle" "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, sas_expander->handle, (unsigned long long) sas_expander->sas_address); kfree(sas_expander->phy); kfree(sas_expander); } /** * _scsih_ir_shutdown - IR shutdown notification * @ioc: per adapter object * * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that * the host system is shutting down. * * Return nothing. */ static void _scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc) { Mpi2RaidActionRequest_t *mpi_request; Mpi2RaidActionReply_t *mpi_reply; u16 smid; /* is IR firmware build loaded ? */ if (!ioc->ir_firmware) return; /* are there any volumes ? */ if (list_empty(&ioc->raid_device_list)) return; mutex_lock(&ioc->scsih_cmds.mutex); if (ioc->scsih_cmds.status != MPT2_CMD_NOT_USED) { printk(MPT2SAS_ERR_FMT "%s: scsih_cmd in use\n", ioc->name, __func__); goto out; } ioc->scsih_cmds.status = MPT2_CMD_PENDING; smid = mpt2sas_base_get_smid(ioc, ioc->scsih_cb_idx); if (!smid) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); ioc->scsih_cmds.status = MPT2_CMD_NOT_USED; goto out; } mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); ioc->scsih_cmds.smid = smid; memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t)); mpi_request->Function = MPI2_FUNCTION_RAID_ACTION; mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED; if (!ioc->hide_ir_msg) printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name); init_completion(&ioc->scsih_cmds.done); mpt2sas_base_put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ); if (!(ioc->scsih_cmds.status & MPT2_CMD_COMPLETE)) { printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, __func__); goto out; } if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) { mpi_reply = ioc->scsih_cmds.reply; if (!ioc->hide_ir_msg) printk(MPT2SAS_INFO_FMT "IR shutdown (complete): " "ioc_status(0x%04x), loginfo(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->IOCStatus), le32_to_cpu(mpi_reply->IOCLogInfo)); } out: ioc->scsih_cmds.status = MPT2_CMD_NOT_USED; mutex_unlock(&ioc->scsih_cmds.mutex); } /** * _scsih_shutdown - routine call during system shutdown * @pdev: PCI device struct * * Return nothing. */ static void _scsih_shutdown(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); struct workqueue_struct *wq; unsigned long flags; ioc->remove_host = 1; _scsih_fw_event_cleanup_queue(ioc); spin_lock_irqsave(&ioc->fw_event_lock, flags); wq = ioc->firmware_event_thread; ioc->firmware_event_thread = NULL; spin_unlock_irqrestore(&ioc->fw_event_lock, flags); if (wq) destroy_workqueue(wq); _scsih_ir_shutdown(ioc); mpt2sas_base_detach(ioc); } /** * _scsih_remove - detach and remove add host * @pdev: PCI device struct * * Routine called when unloading the driver. * Return nothing. */ static void __devexit _scsih_remove(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); struct _sas_port *mpt2sas_port, *next_port; struct _raid_device *raid_device, *next; struct MPT2SAS_TARGET *sas_target_priv_data; struct workqueue_struct *wq; unsigned long flags; ioc->remove_host = 1; _scsih_fw_event_cleanup_queue(ioc); spin_lock_irqsave(&ioc->fw_event_lock, flags); wq = ioc->firmware_event_thread; ioc->firmware_event_thread = NULL; spin_unlock_irqrestore(&ioc->fw_event_lock, flags); if (wq) destroy_workqueue(wq); /* release all the volumes */ _scsih_ir_shutdown(ioc); list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list, list) { if (raid_device->starget) { sas_target_priv_data = raid_device->starget->hostdata; sas_target_priv_data->deleted = 1; scsi_remove_target(&raid_device->starget->dev); } printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid" "(0x%016llx)\n", ioc->name, raid_device->handle, (unsigned long long) raid_device->wwid); _scsih_raid_device_remove(ioc, raid_device); } /* free ports attached to the sas_host */ list_for_each_entry_safe(mpt2sas_port, next_port, &ioc->sas_hba.sas_port_list, port_list) { if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE) mpt2sas_device_remove(ioc, mpt2sas_port->remote_identify.sas_address); else if (mpt2sas_port->remote_identify.device_type == SAS_EDGE_EXPANDER_DEVICE || mpt2sas_port->remote_identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) mpt2sas_expander_remove(ioc, mpt2sas_port->remote_identify.sas_address); } /* free phys attached to the sas_host */ if (ioc->sas_hba.num_phys) { kfree(ioc->sas_hba.phy); ioc->sas_hba.phy = NULL; ioc->sas_hba.num_phys = 0; } sas_remove_host(shost); mpt2sas_base_detach(ioc); list_del(&ioc->list); scsi_remove_host(shost); scsi_host_put(shost); } /** * _scsih_probe_boot_devices - reports 1st device * @ioc: per adapter object * * If specified in bios page 2, this routine reports the 1st * device scsi-ml or sas transport for persistent boot device * purposes. Please refer to function _scsih_determine_boot_device() */ static void _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc) { u8 is_raid; void *device; struct _sas_device *sas_device; struct _raid_device *raid_device; u16 handle; u64 sas_address_parent; u64 sas_address; unsigned long flags; int rc; /* no Bios, return immediately */ if (!ioc->bios_pg3.BiosVersion) return; device = NULL; is_raid = 0; if (ioc->req_boot_device.device) { device = ioc->req_boot_device.device; is_raid = ioc->req_boot_device.is_raid; } else if (ioc->req_alt_boot_device.device) { device = ioc->req_alt_boot_device.device; is_raid = ioc->req_alt_boot_device.is_raid; } else if (ioc->current_boot_device.device) { device = ioc->current_boot_device.device; is_raid = ioc->current_boot_device.is_raid; } if (!device) return; if (is_raid) { raid_device = device; rc = scsi_add_device(ioc->shost, RAID_CHANNEL, raid_device->id, 0); if (rc) _scsih_raid_device_remove(ioc, raid_device); } else { sas_device = device; handle = sas_device->handle; sas_address_parent = sas_device->sas_address_parent; sas_address = sas_device->sas_address; spin_lock_irqsave(&ioc->sas_device_lock, flags); list_move_tail(&sas_device->list, &ioc->sas_device_list); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (ioc->hide_drives) return; if (!mpt2sas_transport_port_add(ioc, sas_device->handle, sas_device->sas_address_parent)) { _scsih_sas_device_remove(ioc, sas_device); } else if (!sas_device->starget) { mpt2sas_transport_port_remove(ioc, sas_address, sas_address_parent); _scsih_sas_device_remove(ioc, sas_device); } } } /** * _scsih_probe_raid - reporting raid volumes to scsi-ml * @ioc: per adapter object * * Called during initial loading of the driver. */ static void _scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc) { struct _raid_device *raid_device, *raid_next; int rc; list_for_each_entry_safe(raid_device, raid_next, &ioc->raid_device_list, list) { if (raid_device->starget) continue; rc = scsi_add_device(ioc->shost, RAID_CHANNEL, raid_device->id, 0); if (rc) _scsih_raid_device_remove(ioc, raid_device); } } /** * _scsih_probe_sas - reporting sas devices to sas transport * @ioc: per adapter object * * Called during initial loading of the driver. */ static void _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc) { struct _sas_device *sas_device, *next; unsigned long flags; /* SAS Device List */ list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, list) { if (ioc->hide_drives) continue; if (!mpt2sas_transport_port_add(ioc, sas_device->handle, sas_device->sas_address_parent)) { list_del(&sas_device->list); kfree(sas_device); continue; } else if (!sas_device->starget) { mpt2sas_transport_port_remove(ioc, sas_device->sas_address, sas_device->sas_address_parent); list_del(&sas_device->list); kfree(sas_device); continue; } spin_lock_irqsave(&ioc->sas_device_lock, flags); list_move_tail(&sas_device->list, &ioc->sas_device_list); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } } /** * _scsih_probe_devices - probing for devices * @ioc: per adapter object * * Called during initial loading of the driver. */ static void _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc) { u16 volume_mapping_flags; if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR)) return; /* return when IOC doesn't support initiator mode */ _scsih_probe_boot_devices(ioc); if (ioc->ir_firmware) { volume_mapping_flags = le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) & MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) { _scsih_probe_raid(ioc); _scsih_probe_sas(ioc); } else { _scsih_probe_sas(ioc); _scsih_probe_raid(ioc); } } else _scsih_probe_sas(ioc); } /** * _scsih_scan_start - scsi lld callback for .scan_start * @shost: SCSI host pointer * * The shost has the ability to discover targets on its own instead * of scanning the entire bus. In our implemention, we will kick off * firmware discovery. */ static void _scsih_scan_start(struct Scsi_Host *shost) { struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); int rc; if (diag_buffer_enable != -1 && diag_buffer_enable != 0) mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable); ioc->start_scan = 1; rc = mpt2sas_port_enable(ioc); if (rc != 0) printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name); } /** * _scsih_scan_finished - scsi lld callback for .scan_finished * @shost: SCSI host pointer * @time: elapsed time of the scan in jiffies * * This function will be called periodically until it returns 1 with the * scsi_host and the elapsed time of the scan in jiffies. In our implemention, * we wait for firmware discovery to complete, then return 1. */ static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time) { struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); if (time >= (300 * HZ)) { ioc->base_cmds.status = MPT2_CMD_NOT_USED; printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout " "(timeout=300s)\n", ioc->name); ioc->is_driver_loading = 0; return 1; } if (ioc->start_scan) return 0; if (ioc->start_scan_failed) { printk(MPT2SAS_INFO_FMT "port enable: FAILED with " "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed); ioc->is_driver_loading = 0; ioc->wait_for_discovery_to_complete = 0; ioc->remove_host = 1; return 1; } printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name); ioc->base_cmds.status = MPT2_CMD_NOT_USED; if (ioc->wait_for_discovery_to_complete) { ioc->wait_for_discovery_to_complete = 0; _scsih_probe_devices(ioc); } mpt2sas_base_start_watchdog(ioc); ioc->is_driver_loading = 0; return 1; } /** * _scsih_probe - attach and add scsi host * @pdev: PCI device struct * @id: pci device id * * Returns 0 success, anything else error. */ static int _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct MPT2SAS_ADAPTER *ioc; struct Scsi_Host *shost; shost = scsi_host_alloc(&scsih_driver_template, sizeof(struct MPT2SAS_ADAPTER)); if (!shost) return -ENODEV; /* init local params */ ioc = shost_priv(shost); memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER)); INIT_LIST_HEAD(&ioc->list); list_add_tail(&ioc->list, &mpt2sas_ioc_list); ioc->shost = shost; ioc->id = mpt_ids++; sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id); ioc->pdev = pdev; if (id->device == MPI2_MFGPAGE_DEVID_SSS6200) { ioc->is_warpdrive = 1; ioc->hide_ir_msg = 1; } else ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS; ioc->scsi_io_cb_idx = scsi_io_cb_idx; ioc->tm_cb_idx = tm_cb_idx; ioc->ctl_cb_idx = ctl_cb_idx; ioc->base_cb_idx = base_cb_idx; ioc->port_enable_cb_idx = port_enable_cb_idx; ioc->transport_cb_idx = transport_cb_idx; ioc->scsih_cb_idx = scsih_cb_idx; ioc->config_cb_idx = config_cb_idx; ioc->tm_tr_cb_idx = tm_tr_cb_idx; ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx; ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx; ioc->logging_level = logging_level; /* misc semaphores and spin locks */ mutex_init(&ioc->reset_in_progress_mutex); spin_lock_init(&ioc->ioc_reset_in_progress_lock); spin_lock_init(&ioc->scsi_lookup_lock); spin_lock_init(&ioc->sas_device_lock); spin_lock_init(&ioc->sas_node_lock); spin_lock_init(&ioc->fw_event_lock); spin_lock_init(&ioc->raid_device_lock); INIT_LIST_HEAD(&ioc->sas_device_list); INIT_LIST_HEAD(&ioc->sas_device_init_list); INIT_LIST_HEAD(&ioc->sas_expander_list); INIT_LIST_HEAD(&ioc->fw_event_list); INIT_LIST_HEAD(&ioc->raid_device_list); INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list); INIT_LIST_HEAD(&ioc->delayed_tr_list); INIT_LIST_HEAD(&ioc->delayed_tr_volume_list); /* init shost parameters */ shost->max_cmd_len = 32; shost->max_lun = max_lun; shost->transportt = mpt2sas_transport_template; shost->unique_id = ioc->id; if (max_sectors != 0xFFFF) { if (max_sectors < 64) { shost->max_sectors = 64; printk(MPT2SAS_WARN_FMT "Invalid value %d passed " "for max_sectors, range is 64 to 8192. Assigning " "value of 64.\n", ioc->name, max_sectors); } else if (max_sectors > 8192) { shost->max_sectors = 8192; printk(MPT2SAS_WARN_FMT "Invalid value %d passed " "for max_sectors, range is 64 to 8192. Assigning " "default value of 8192.\n", ioc->name, max_sectors); } else { shost->max_sectors = max_sectors & 0xFFFE; printk(MPT2SAS_INFO_FMT "The max_sectors value is " "set to %d\n", ioc->name, shost->max_sectors); } } if ((scsi_add_host(shost, &pdev->dev))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); list_del(&ioc->list); goto out_add_shost_fail; } scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION); scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC); /* event thread */ snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name), "fw_event%d", ioc->id); ioc->firmware_event_thread = create_singlethread_workqueue( ioc->firmware_event_name); if (!ioc->firmware_event_thread) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out_thread_fail; } ioc->is_driver_loading = 1; if ((mpt2sas_base_attach(ioc))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out_attach_fail; } scsi_scan_host(shost); if (ioc->is_warpdrive) { if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) ioc->hide_drives = 0; else if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_HIDE_ALL_DISKS) ioc->hide_drives = 1; else { if (_scsih_get_num_volumes(ioc)) ioc->hide_drives = 1; else ioc->hide_drives = 0; } } else ioc->hide_drives = 0; _scsih_probe_devices(ioc); return 0; out_attach_fail: destroy_workqueue(ioc->firmware_event_thread); out_thread_fail: list_del(&ioc->list); scsi_remove_host(shost); scsi_host_put(shost); out_add_shost_fail: return -ENODEV; } #ifdef CONFIG_PM /** * _scsih_suspend - power management suspend main entry point * @pdev: PCI device struct * @state: PM state change to (usually PCI_D3) * * Returns 0 success, anything else error. */ static int _scsih_suspend(struct pci_dev *pdev, pm_message_t state) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); pci_power_t device_state; mpt2sas_base_stop_watchdog(ioc); scsi_block_requests(shost); device_state = pci_choose_state(pdev, state); printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering " "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), device_state); mpt2sas_base_free_resources(ioc); pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, device_state); return 0; } /** * _scsih_resume - power management resume main entry point * @pdev: PCI device struct * * Returns 0 success, anything else error. */ static int _scsih_resume(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); pci_power_t device_state = pdev->current_state; int r; printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous " "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), device_state); pci_set_power_state(pdev, PCI_D0); pci_enable_wake(pdev, PCI_D0, 0); pci_restore_state(pdev); ioc->pdev = pdev; r = mpt2sas_base_map_resources(ioc); if (r) return r; mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); scsi_unblock_requests(shost); mpt2sas_base_start_watchdog(ioc); return 0; } #endif /* CONFIG_PM */ /** * _scsih_pci_error_detected - Called when a PCI error is detected. * @pdev: PCI device struct * @state: PCI channel state * * Description: Called when a PCI error is detected. * * Return value: * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT */ static pci_ers_result_t _scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n", ioc->name, state); switch (state) { case pci_channel_io_normal: return PCI_ERS_RESULT_CAN_RECOVER; case pci_channel_io_frozen: /* Fatal error, prepare for slot reset */ ioc->pci_error_recovery = 1; scsi_block_requests(ioc->shost); mpt2sas_base_stop_watchdog(ioc); mpt2sas_base_free_resources(ioc); return PCI_ERS_RESULT_NEED_RESET; case pci_channel_io_perm_failure: /* Permanent error, prepare for device removal */ ioc->pci_error_recovery = 1; mpt2sas_base_stop_watchdog(ioc); _scsih_flush_running_cmds(ioc); return PCI_ERS_RESULT_DISCONNECT; } return PCI_ERS_RESULT_NEED_RESET; } /** * _scsih_pci_slot_reset - Called when PCI slot has been reset. * @pdev: PCI device struct * * Description: This routine is called by the pci error recovery * code after the PCI slot has been reset, just before we * should resume normal operations. */ static pci_ers_result_t _scsih_pci_slot_reset(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); int rc; printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n", ioc->name); ioc->pci_error_recovery = 0; ioc->pdev = pdev; pci_restore_state(pdev); rc = mpt2sas_base_map_resources(ioc); if (rc) return PCI_ERS_RESULT_DISCONNECT; rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); printk(MPT2SAS_WARN_FMT "hard reset: %s\n", ioc->name, (rc == 0) ? "success" : "failed"); if (!rc) return PCI_ERS_RESULT_RECOVERED; else return PCI_ERS_RESULT_DISCONNECT; } /** * _scsih_pci_resume() - resume normal ops after PCI reset * @pdev: pointer to PCI device * * Called when the error recovery driver tells us that its * OK to resume normal operation. Use completion to allow * halted scsi ops to resume. */ static void _scsih_pci_resume(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name); pci_cleanup_aer_uncorrect_error_status(pdev); mpt2sas_base_start_watchdog(ioc); scsi_unblock_requests(ioc->shost); } /** * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers * @pdev: pointer to PCI device */ static pci_ers_result_t _scsih_pci_mmio_enabled(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n", ioc->name); /* TODO - dump whatever for debugging purposes */ /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; } static struct pci_error_handlers _scsih_err_handler = { .error_detected = _scsih_pci_error_detected, .mmio_enabled = _scsih_pci_mmio_enabled, .slot_reset = _scsih_pci_slot_reset, .resume = _scsih_pci_resume, }; static struct pci_driver scsih_driver = { .name = MPT2SAS_DRIVER_NAME, .id_table = scsih_pci_table, .probe = _scsih_probe, .remove = __devexit_p(_scsih_remove), .shutdown = _scsih_shutdown, .err_handler = &_scsih_err_handler, #ifdef CONFIG_PM .suspend = _scsih_suspend, .resume = _scsih_resume, #endif }; /* raid transport support */ static struct raid_function_template mpt2sas_raid_functions = { .cookie = &scsih_driver_template, .is_raid = _scsih_is_raid, .get_resync = _scsih_get_resync, .get_state = _scsih_get_state, }; /** * _scsih_init - main entry point for this driver. * * Returns 0 success, anything else error. */ static int __init _scsih_init(void) { int error; mpt_ids = 0; printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME, MPT2SAS_DRIVER_VERSION); mpt2sas_transport_template = sas_attach_transport(&mpt2sas_transport_functions); if (!mpt2sas_transport_template) return -ENODEV; /* raid transport support */ mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions); if (!mpt2sas_raid_template) { sas_release_transport(mpt2sas_transport_template); return -ENODEV; } mpt2sas_base_initialize_callback_handler(); /* queuecommand callback hander */ scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done); /* task management callback handler */ tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done); /* base internal commands callback handler */ base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done); port_enable_cb_idx = mpt2sas_base_register_callback_handler( mpt2sas_port_enable_done); /* transport internal commands callback handler */ transport_cb_idx = mpt2sas_base_register_callback_handler( mpt2sas_transport_done); /* scsih internal commands callback handler */ scsih_cb_idx = mpt2sas_base_register_callback_handler(_scsih_done); /* configuration page API internal commands callback handler */ config_cb_idx = mpt2sas_base_register_callback_handler( mpt2sas_config_done); /* ctl module callback handler */ ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done); tm_tr_cb_idx = mpt2sas_base_register_callback_handler( _scsih_tm_tr_complete); tm_tr_volume_cb_idx = mpt2sas_base_register_callback_handler( _scsih_tm_volume_tr_complete); tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler( _scsih_sas_control_complete); mpt2sas_ctl_init(); error = pci_register_driver(&scsih_driver); if (error) { /* raid transport support */ raid_class_release(mpt2sas_raid_template); sas_release_transport(mpt2sas_transport_template); } return error; } /** * _scsih_exit - exit point for this driver (when it is a module). * * Returns 0 success, anything else error. */ static void __exit _scsih_exit(void) { printk(KERN_INFO "mpt2sas version %s unloading\n", MPT2SAS_DRIVER_VERSION); pci_unregister_driver(&scsih_driver); mpt2sas_ctl_exit(); mpt2sas_base_release_callback_handler(scsi_io_cb_idx); mpt2sas_base_release_callback_handler(tm_cb_idx); mpt2sas_base_release_callback_handler(base_cb_idx); mpt2sas_base_release_callback_handler(port_enable_cb_idx); mpt2sas_base_release_callback_handler(transport_cb_idx); mpt2sas_base_release_callback_handler(scsih_cb_idx); mpt2sas_base_release_callback_handler(config_cb_idx); mpt2sas_base_release_callback_handler(ctl_cb_idx); mpt2sas_base_release_callback_handler(tm_tr_cb_idx); mpt2sas_base_release_callback_handler(tm_tr_volume_cb_idx); mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx); /* raid transport support */ raid_class_release(mpt2sas_raid_template); sas_release_transport(mpt2sas_transport_template); } module_init(_scsih_init); module_exit(_scsih_exit);