/** * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link * * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com * * Authors: Felipe Balbi , * Sebastian Andrzej Siewior * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 of * the License as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "debug.h" #include "core.h" #include "gadget.h" #include "io.h" /** * dwc3_gadget_set_test_mode - Enables USB2 Test Modes * @dwc: pointer to our context structure * @mode: the mode to set (J, K SE0 NAK, Force Enable) * * Caller should take care of locking. This function will * return 0 on success or -EINVAL if wrong Test Selector * is passed */ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) { u32 reg; reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; switch (mode) { case TEST_J: case TEST_K: case TEST_SE0_NAK: case TEST_PACKET: case TEST_FORCE_EN: reg |= mode << 1; break; default: return -EINVAL; } dwc3_writel(dwc->regs, DWC3_DCTL, reg); return 0; } /** * dwc3_gadget_get_link_state - Gets current state of USB Link * @dwc: pointer to our context structure * * Caller should take care of locking. This function will * return the link state on success (>= 0) or -ETIMEDOUT. */ int dwc3_gadget_get_link_state(struct dwc3 *dwc) { u32 reg; reg = dwc3_readl(dwc->regs, DWC3_DSTS); return DWC3_DSTS_USBLNKST(reg); } /** * dwc3_gadget_set_link_state - Sets USB Link to a particular State * @dwc: pointer to our context structure * @state: the state to put link into * * Caller should take care of locking. This function will * return 0 on success or -ETIMEDOUT. */ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) { int retries = 10000; u32 reg; /* * Wait until device controller is ready. Only applies to 1.94a and * later RTL. */ if (dwc->revision >= DWC3_REVISION_194A) { while (--retries) { reg = dwc3_readl(dwc->regs, DWC3_DSTS); if (reg & DWC3_DSTS_DCNRD) udelay(5); else break; } if (retries <= 0) return -ETIMEDOUT; } reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; /* set requested state */ reg |= DWC3_DCTL_ULSTCHNGREQ(state); dwc3_writel(dwc->regs, DWC3_DCTL, reg); /* * The following code is racy when called from dwc3_gadget_wakeup, * and is not needed, at least on newer versions */ if (dwc->revision >= DWC3_REVISION_194A) return 0; /* wait for a change in DSTS */ retries = 10000; while (--retries) { reg = dwc3_readl(dwc->regs, DWC3_DSTS); if (DWC3_DSTS_USBLNKST(reg) == state) return 0; udelay(5); } dev_vdbg(dwc->dev, "link state change request timed out\n"); return -ETIMEDOUT; } /** * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case * @dwc: pointer to our context structure * * This function will a best effort FIFO allocation in order * to improve FIFO usage and throughput, while still allowing * us to enable as many endpoints as possible. * * Keep in mind that this operation will be highly dependent * on the configured size for RAM1 - which contains TxFifo -, * the amount of endpoints enabled on coreConsultant tool, and * the width of the Master Bus. * * In the ideal world, we would always be able to satisfy the * following equation: * * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \ * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes * * Unfortunately, due to many variables that's not always the case. */ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc) { int last_fifo_depth = 0; int ram1_depth; int fifo_size; int mdwidth; int num; if (!dwc->needs_fifo_resize) return 0; ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7); mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); /* MDWIDTH is represented in bits, we need it in bytes */ mdwidth >>= 3; /* * FIXME For now we will only allocate 1 wMaxPacketSize space * for each enabled endpoint, later patches will come to * improve this algorithm so that we better use the internal * FIFO space */ for (num = 0; num < dwc->num_in_eps; num++) { /* bit0 indicates direction; 1 means IN ep */ struct dwc3_ep *dep = dwc->eps[(num << 1) | 1]; int mult = 1; int tmp; if (!(dep->flags & DWC3_EP_ENABLED)) continue; if (usb_endpoint_xfer_bulk(dep->endpoint.desc) || usb_endpoint_xfer_isoc(dep->endpoint.desc)) mult = 3; /* * REVISIT: the following assumes we will always have enough * space available on the FIFO RAM for all possible use cases. * Make sure that's true somehow and change FIFO allocation * accordingly. * * If we have Bulk or Isochronous endpoints, we want * them to be able to be very, very fast. So we're giving * those endpoints a fifo_size which is enough for 3 full * packets */ tmp = mult * (dep->endpoint.maxpacket + mdwidth); tmp += mdwidth; fifo_size = DIV_ROUND_UP(tmp, mdwidth); fifo_size |= (last_fifo_depth << 16); dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n", dep->name, last_fifo_depth, fifo_size & 0xffff); dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size); last_fifo_depth += (fifo_size & 0xffff); } return 0; } void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status) { struct dwc3 *dwc = dep->dwc; int i; if (req->queued) { i = 0; do { dep->busy_slot++; /* * Skip LINK TRB. We can't use req->trb and check for * DWC3_TRBCTL_LINK_TRB because it points the TRB we * just completed (not the LINK TRB). */ if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM- 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) dep->busy_slot++; } while(++i < req->request.num_mapped_sgs); req->queued = false; } list_del(&req->list); req->trb = NULL; if (req->request.status == -EINPROGRESS) req->request.status = status; if (dwc->ep0_bounced && dep->number == 0) dwc->ep0_bounced = false; else usb_gadget_unmap_request(&dwc->gadget, &req->request, req->direction); dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", req, dep->name, req->request.actual, req->request.length, status); trace_dwc3_gadget_giveback(req); spin_unlock(&dwc->lock); usb_gadget_giveback_request(&dep->endpoint, &req->request); spin_lock(&dwc->lock); } int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param) { u32 timeout = 500; u32 reg; trace_dwc3_gadget_generic_cmd(cmd, param); dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param); dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT); do { reg = dwc3_readl(dwc->regs, DWC3_DGCMD); if (!(reg & DWC3_DGCMD_CMDACT)) { dev_vdbg(dwc->dev, "Command Complete --> %d\n", DWC3_DGCMD_STATUS(reg)); return 0; } /* * We can't sleep here, because it's also called from * interrupt context. */ timeout--; if (!timeout) return -ETIMEDOUT; udelay(1); } while (1); } int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) { struct dwc3_ep *dep = dwc->eps[ep]; u32 timeout = 500; u32 reg; trace_dwc3_gadget_ep_cmd(dep, cmd, params); dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0); dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1); dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2); dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT); do { reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep)); if (!(reg & DWC3_DEPCMD_CMDACT)) { dev_vdbg(dwc->dev, "Command Complete --> %d\n", DWC3_DEPCMD_STATUS(reg)); return 0; } /* * We can't sleep here, because it is also called from * interrupt context. */ timeout--; if (!timeout) return -ETIMEDOUT; udelay(1); } while (1); } static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep, struct dwc3_trb *trb) { u32 offset = (char *) trb - (char *) dep->trb_pool; return dep->trb_pool_dma + offset; } static int dwc3_alloc_trb_pool(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; if (dep->trb_pool) return 0; if (dep->number == 0 || dep->number == 1) return 0; dep->trb_pool = dma_alloc_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM, &dep->trb_pool_dma, GFP_KERNEL); if (!dep->trb_pool) { dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n", dep->name); return -ENOMEM; } return 0; } static void dwc3_free_trb_pool(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM, dep->trb_pool, dep->trb_pool_dma); dep->trb_pool = NULL; dep->trb_pool_dma = 0; } static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; u32 cmd; memset(¶ms, 0x00, sizeof(params)); if (dep->number != 1) { cmd = DWC3_DEPCMD_DEPSTARTCFG; /* XferRscIdx == 0 for ep0 and 2 for the remaining */ if (dep->number > 1) { if (dwc->start_config_issued) return 0; dwc->start_config_issued = true; cmd |= DWC3_DEPCMD_PARAM(2); } return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); } return 0; } static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, const struct usb_ss_ep_comp_descriptor *comp_desc, bool ignore, bool restore) { struct dwc3_gadget_ep_cmd_params params; memset(¶ms, 0x00, sizeof(params)); params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc)) | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc)); /* Burst size is only needed in SuperSpeed mode */ if (dwc->gadget.speed == USB_SPEED_SUPER) { u32 burst = dep->endpoint.maxburst - 1; params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst); } if (ignore) params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM; if (restore) { params.param0 |= DWC3_DEPCFG_ACTION_RESTORE; params.param2 |= dep->saved_state; } params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN | DWC3_DEPCFG_XFER_NOT_READY_EN; if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) { params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE | DWC3_DEPCFG_STREAM_EVENT_EN; dep->stream_capable = true; } if (!usb_endpoint_xfer_control(desc)) params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN; /* * We are doing 1:1 mapping for endpoints, meaning * Physical Endpoints 2 maps to Logical Endpoint 2 and * so on. We consider the direction bit as part of the physical * endpoint number. So USB endpoint 0x81 is 0x03. */ params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number); /* * We must use the lower 16 TX FIFOs even though * HW might have more */ if (dep->direction) params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1); if (desc->bInterval) { params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1); dep->interval = 1 << (desc->bInterval - 1); } return dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_SETEPCONFIG, ¶ms); } static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; memset(¶ms, 0x00, sizeof(params)); params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); return dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_SETTRANSFRESOURCE, ¶ms); } /** * __dwc3_gadget_ep_enable - Initializes a HW endpoint * @dep: endpoint to be initialized * @desc: USB Endpoint Descriptor * * Caller should take care of locking */ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, const struct usb_ss_ep_comp_descriptor *comp_desc, bool ignore, bool restore) { struct dwc3 *dwc = dep->dwc; u32 reg; int ret; dev_vdbg(dwc->dev, "Enabling %s\n", dep->name); if (!(dep->flags & DWC3_EP_ENABLED)) { ret = dwc3_gadget_start_config(dwc, dep); if (ret) return ret; } ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore, restore); if (ret) return ret; if (!(dep->flags & DWC3_EP_ENABLED)) { struct dwc3_trb *trb_st_hw; struct dwc3_trb *trb_link; ret = dwc3_gadget_set_xfer_resource(dwc, dep); if (ret) return ret; dep->endpoint.desc = desc; dep->comp_desc = comp_desc; dep->type = usb_endpoint_type(desc); dep->flags |= DWC3_EP_ENABLED; reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); reg |= DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); if (!usb_endpoint_xfer_isoc(desc)) return 0; memset(&trb_link, 0, sizeof(trb_link)); /* Link TRB for ISOC. The HWO bit is never reset */ trb_st_hw = &dep->trb_pool[0]; trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1]; trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw)); trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw)); trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB; trb_link->ctrl |= DWC3_TRB_CTRL_HWO; } return 0; } static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force); static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_request *req; if (!list_empty(&dep->req_queued)) { dwc3_stop_active_transfer(dwc, dep->number, true); /* - giveback all requests to gadget driver */ while (!list_empty(&dep->req_queued)) { req = next_request(&dep->req_queued); dwc3_gadget_giveback(dep, req, -ESHUTDOWN); } } while (!list_empty(&dep->request_list)) { req = next_request(&dep->request_list); dwc3_gadget_giveback(dep, req, -ESHUTDOWN); } } /** * __dwc3_gadget_ep_disable - Disables a HW endpoint * @dep: the endpoint to disable * * This function also removes requests which are currently processed ny the * hardware and those which are not yet scheduled. * Caller should take care of locking. */ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; u32 reg; dwc3_remove_requests(dwc, dep); /* make sure HW endpoint isn't stalled */ if (dep->flags & DWC3_EP_STALL) __dwc3_gadget_ep_set_halt(dep, 0); reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); reg &= ~DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); dep->stream_capable = false; dep->endpoint.desc = NULL; dep->comp_desc = NULL; dep->type = 0; dep->flags = 0; return 0; } /* -------------------------------------------------------------------------- */ static int dwc3_gadget_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { return -EINVAL; } static int dwc3_gadget_ep0_disable(struct usb_ep *ep) { return -EINVAL; } /* -------------------------------------------------------------------------- */ static int dwc3_gadget_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { struct dwc3_ep *dep; struct dwc3 *dwc; unsigned long flags; int ret; if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { pr_debug("dwc3: invalid parameters\n"); return -EINVAL; } if (!desc->wMaxPacketSize) { pr_debug("dwc3: missing wMaxPacketSize\n"); return -EINVAL; } dep = to_dwc3_ep(ep); dwc = dep->dwc; if (dep->flags & DWC3_EP_ENABLED) { dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", dep->name); return 0; } switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: strlcat(dep->name, "-control", sizeof(dep->name)); break; case USB_ENDPOINT_XFER_ISOC: strlcat(dep->name, "-isoc", sizeof(dep->name)); break; case USB_ENDPOINT_XFER_BULK: strlcat(dep->name, "-bulk", sizeof(dep->name)); break; case USB_ENDPOINT_XFER_INT: strlcat(dep->name, "-int", sizeof(dep->name)); break; default: dev_err(dwc->dev, "invalid endpoint transfer type\n"); } spin_lock_irqsave(&dwc->lock, flags); ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; } static int dwc3_gadget_ep_disable(struct usb_ep *ep) { struct dwc3_ep *dep; struct dwc3 *dwc; unsigned long flags; int ret; if (!ep) { pr_debug("dwc3: invalid parameters\n"); return -EINVAL; } dep = to_dwc3_ep(ep); dwc = dep->dwc; if (!(dep->flags & DWC3_EP_ENABLED)) { dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n", dep->name); return 0; } snprintf(dep->name, sizeof(dep->name), "ep%d%s", dep->number >> 1, (dep->number & 1) ? "in" : "out"); spin_lock_irqsave(&dwc->lock, flags); ret = __dwc3_gadget_ep_disable(dep); spin_unlock_irqrestore(&dwc->lock, flags); return ret; } static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) { struct dwc3_request *req; struct dwc3_ep *dep = to_dwc3_ep(ep); req = kzalloc(sizeof(*req), gfp_flags); if (!req) return NULL; req->epnum = dep->number; req->dep = dep; trace_dwc3_alloc_request(req); return &req->request; } static void dwc3_gadget_ep_free_request(struct usb_ep *ep, struct usb_request *request) { struct dwc3_request *req = to_dwc3_request(request); trace_dwc3_free_request(req); kfree(req); } /** * dwc3_prepare_one_trb - setup one TRB from one request * @dep: endpoint for which this request is prepared * @req: dwc3_request pointer */ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_request *req, dma_addr_t dma, unsigned length, unsigned last, unsigned chain, unsigned node) { struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; dev_vdbg(dwc->dev, "%s: req %p dma %08llx length %d%s%s\n", dep->name, req, (unsigned long long) dma, length, last ? " last" : "", chain ? " chain" : ""); trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK]; if (!req->trb) { dwc3_gadget_move_request_queued(req); req->trb = trb; req->trb_dma = dwc3_trb_dma_offset(dep, trb); req->start_slot = dep->free_slot & DWC3_TRB_MASK; } dep->free_slot++; /* Skip the LINK-TRB on ISOC */ if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) dep->free_slot++; trb->size = DWC3_TRB_SIZE_LENGTH(length); trb->bpl = lower_32_bits(dma); trb->bph = upper_32_bits(dma); switch (usb_endpoint_type(dep->endpoint.desc)) { case USB_ENDPOINT_XFER_CONTROL: trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP; break; case USB_ENDPOINT_XFER_ISOC: if (!node) trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; else trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS; break; case USB_ENDPOINT_XFER_BULK: case USB_ENDPOINT_XFER_INT: trb->ctrl = DWC3_TRBCTL_NORMAL; break; default: /* * This is only possible with faulty memory because we * checked it already :) */ BUG(); } if (!req->request.no_interrupt && !chain) trb->ctrl |= DWC3_TRB_CTRL_IOC; if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; trb->ctrl |= DWC3_TRB_CTRL_CSP; } else if (last) { trb->ctrl |= DWC3_TRB_CTRL_LST; } if (chain) trb->ctrl |= DWC3_TRB_CTRL_CHN; if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable) trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id); trb->ctrl |= DWC3_TRB_CTRL_HWO; trace_dwc3_prepare_trb(dep, trb); } /* * dwc3_prepare_trbs - setup TRBs from requests * @dep: endpoint for which requests are being prepared * @starting: true if the endpoint is idle and no requests are queued. * * The function goes through the requests list and sets up TRBs for the * transfers. The function returns once there are no more TRBs available or * it runs out of requests. */ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting) { struct dwc3_request *req, *n; u32 trbs_left; u32 max; unsigned int last_one = 0; BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM); /* the first request must not be queued */ trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK; /* Can't wrap around on a non-isoc EP since there's no link TRB */ if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) { max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK); if (trbs_left > max) trbs_left = max; } /* * If busy & slot are equal than it is either full or empty. If we are * starting to process requests then we are empty. Otherwise we are * full and don't do anything */ if (!trbs_left) { if (!starting) return; trbs_left = DWC3_TRB_NUM; /* * In case we start from scratch, we queue the ISOC requests * starting from slot 1. This is done because we use ring * buffer and have no LST bit to stop us. Instead, we place * IOC bit every TRB_NUM/4. We try to avoid having an interrupt * after the first request so we start at slot 1 and have * 7 requests proceed before we hit the first IOC. * Other transfer types don't use the ring buffer and are * processed from the first TRB until the last one. Since we * don't wrap around we have to start at the beginning. */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dep->busy_slot = 1; dep->free_slot = 1; } else { dep->busy_slot = 0; dep->free_slot = 0; } } /* The last TRB is a link TRB, not used for xfer */ if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) return; list_for_each_entry_safe(req, n, &dep->request_list, list) { unsigned length; dma_addr_t dma; last_one = false; if (req->request.num_mapped_sgs > 0) { struct usb_request *request = &req->request; struct scatterlist *sg = request->sg; struct scatterlist *s; int i; for_each_sg(sg, s, request->num_mapped_sgs, i) { unsigned chain = true; length = sg_dma_len(s); dma = sg_dma_address(s); if (i == (request->num_mapped_sgs - 1) || sg_is_last(s)) { if (list_is_last(&req->list, &dep->request_list)) last_one = true; chain = false; } trbs_left--; if (!trbs_left) last_one = true; if (last_one) chain = false; dwc3_prepare_one_trb(dep, req, dma, length, last_one, chain, i); if (last_one) break; } } else { dma = req->request.dma; length = req->request.length; trbs_left--; if (!trbs_left) last_one = 1; /* Is this the last request? */ if (list_is_last(&req->list, &dep->request_list)) last_one = 1; dwc3_prepare_one_trb(dep, req, dma, length, last_one, false, 0); if (last_one) break; } } } static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, int start_new) { struct dwc3_gadget_ep_cmd_params params; struct dwc3_request *req; struct dwc3 *dwc = dep->dwc; int ret; u32 cmd; if (start_new && (dep->flags & DWC3_EP_BUSY)) { dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name); return -EBUSY; } dep->flags &= ~DWC3_EP_PENDING_REQUEST; /* * If we are getting here after a short-out-packet we don't enqueue any * new requests as we try to set the IOC bit only on the last request. */ if (start_new) { if (list_empty(&dep->req_queued)) dwc3_prepare_trbs(dep, start_new); /* req points to the first request which will be sent */ req = next_request(&dep->req_queued); } else { dwc3_prepare_trbs(dep, start_new); /* * req points to the first request where HWO changed from 0 to 1 */ req = next_request(&dep->req_queued); } if (!req) { dep->flags |= DWC3_EP_PENDING_REQUEST; return 0; } memset(¶ms, 0, sizeof(params)); if (start_new) { params.param0 = upper_32_bits(req->trb_dma); params.param1 = lower_32_bits(req->trb_dma); cmd = DWC3_DEPCMD_STARTTRANSFER; } else { cmd = DWC3_DEPCMD_UPDATETRANSFER; } cmd |= DWC3_DEPCMD_PARAM(cmd_param); ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); if (ret < 0) { dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n"); /* * FIXME we need to iterate over the list of requests * here and stop, unmap, free and del each of the linked * requests instead of what we do now. */ usb_gadget_unmap_request(&dwc->gadget, &req->request, req->direction); list_del(&req->list); return ret; } dep->flags |= DWC3_EP_BUSY; if (start_new) { dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc, dep->number); WARN_ON_ONCE(!dep->resource_index); } return 0; } static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, struct dwc3_ep *dep, u32 cur_uf) { u32 uf; if (list_empty(&dep->request_list)) { dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", dep->name); dep->flags |= DWC3_EP_PENDING_REQUEST; return; } /* 4 micro frames in the future */ uf = cur_uf + dep->interval * 4; __dwc3_gadget_kick_transfer(dep, uf, 1); } static void dwc3_gadget_start_isoc(struct dwc3 *dwc, struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { u32 cur_uf, mask; mask = ~(dep->interval - 1); cur_uf = event->parameters & mask; __dwc3_gadget_start_isoc(dwc, dep, cur_uf); } static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; int ret; req->request.actual = 0; req->request.status = -EINPROGRESS; req->direction = dep->direction; req->epnum = dep->number; /* * We only add to our list of requests now and * start consuming the list once we get XferNotReady * IRQ. * * That way, we avoid doing anything that we don't need * to do now and defer it until the point we receive a * particular token from the Host side. * * This will also avoid Host cancelling URBs due to too * many NAKs. */ ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->direction); if (ret) return ret; list_add_tail(&req->list, &dep->request_list); /* * There are a few special cases: * * 1. XferNotReady with empty list of requests. We need to kick the * transfer here in that situation, otherwise we will be NAKing * forever. If we get XferNotReady before gadget driver has a * chance to queue a request, we will ACK the IRQ but won't be * able to receive the data until the next request is queued. * The following code is handling exactly that. * */ if (dep->flags & DWC3_EP_PENDING_REQUEST) { /* * If xfernotready is already elapsed and it is a case * of isoc transfer, then issue END TRANSFER, so that * you can receive xfernotready again and can have * notion of current microframe. */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { if (list_empty(&dep->req_queued)) { dwc3_stop_active_transfer(dwc, dep->number, true); dep->flags = DWC3_EP_ENABLED; } return 0; } ret = __dwc3_gadget_kick_transfer(dep, 0, true); if (ret && ret != -EBUSY) dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); return ret; } /* * 2. XferInProgress on Isoc EP with an active transfer. We need to * kick the transfer here after queuing a request, otherwise the * core may not see the modified TRB(s). */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && (dep->flags & DWC3_EP_BUSY) && !(dep->flags & DWC3_EP_MISSED_ISOC)) { WARN_ON_ONCE(!dep->resource_index); ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index, false); if (ret && ret != -EBUSY) dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); return ret; } /* * 4. Stream Capable Bulk Endpoints. We need to start the transfer * right away, otherwise host will not know we have streams to be * handled. */ if (dep->stream_capable) { int ret; ret = __dwc3_gadget_kick_transfer(dep, 0, true); if (ret && ret != -EBUSY) { struct dwc3 *dwc = dep->dwc; dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); } } return 0; } static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags) { struct dwc3_request *req = to_dwc3_request(request); struct dwc3_ep *dep = to_dwc3_ep(ep); struct dwc3 *dwc = dep->dwc; unsigned long flags; int ret; spin_lock_irqsave(&dwc->lock, flags); if (!dep->endpoint.desc) { dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", request, ep->name); spin_unlock_irqrestore(&dwc->lock, flags); return -ESHUTDOWN; } dev_vdbg(dwc->dev, "queing request %p to %s length %d\n", request, ep->name, request->length); trace_dwc3_ep_queue(req); ret = __dwc3_gadget_ep_queue(dep, req); spin_unlock_irqrestore(&dwc->lock, flags); return ret; } static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request) { struct dwc3_request *req = to_dwc3_request(request); struct dwc3_request *r = NULL; struct dwc3_ep *dep = to_dwc3_ep(ep); struct dwc3 *dwc = dep->dwc; unsigned long flags; int ret = 0; trace_dwc3_ep_dequeue(req); spin_lock_irqsave(&dwc->lock, flags); list_for_each_entry(r, &dep->request_list, list) { if (r == req) break; } if (r != req) { list_for_each_entry(r, &dep->req_queued, list) { if (r == req) break; } if (r == req) { /* wait until it is processed */ dwc3_stop_active_transfer(dwc, dep->number, true); goto out1; } dev_err(dwc->dev, "request %p was not queued to %s\n", request, ep->name); ret = -EINVAL; goto out0; } out1: /* giveback the request */ dwc3_gadget_giveback(dep, req, -ECONNRESET); out0: spin_unlock_irqrestore(&dwc->lock, flags); return ret; } int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) { struct dwc3_gadget_ep_cmd_params params; struct dwc3 *dwc = dep->dwc; int ret; memset(¶ms, 0x00, sizeof(params)); if (value) { ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_SETSTALL, ¶ms); if (ret) dev_err(dwc->dev, "failed to set STALL on %s\n", dep->name); else dep->flags |= DWC3_EP_STALL; } else { ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_CLEARSTALL, ¶ms); if (ret) dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); else dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); } return ret; } static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value) { struct dwc3_ep *dep = to_dwc3_ep(ep); struct dwc3 *dwc = dep->dwc; unsigned long flags; int ret; spin_lock_irqsave(&dwc->lock, flags); if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name); ret = -EINVAL; goto out; } ret = __dwc3_gadget_ep_set_halt(dep, value); out: spin_unlock_irqrestore(&dwc->lock, flags); return ret; } static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep) { struct dwc3_ep *dep = to_dwc3_ep(ep); struct dwc3 *dwc = dep->dwc; unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); dep->flags |= DWC3_EP_WEDGE; spin_unlock_irqrestore(&dwc->lock, flags); if (dep->number == 0 || dep->number == 1) return dwc3_gadget_ep0_set_halt(ep, 1); else return dwc3_gadget_ep_set_halt(ep, 1); } /* -------------------------------------------------------------------------- */ static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_CONTROL, }; static const struct usb_ep_ops dwc3_gadget_ep0_ops = { .enable = dwc3_gadget_ep0_enable, .disable = dwc3_gadget_ep0_disable, .alloc_request = dwc3_gadget_ep_alloc_request, .free_request = dwc3_gadget_ep_free_request, .queue = dwc3_gadget_ep0_queue, .dequeue = dwc3_gadget_ep_dequeue, .set_halt = dwc3_gadget_ep0_set_halt, .set_wedge = dwc3_gadget_ep_set_wedge, }; static const struct usb_ep_ops dwc3_gadget_ep_ops = { .enable = dwc3_gadget_ep_enable, .disable = dwc3_gadget_ep_disable, .alloc_request = dwc3_gadget_ep_alloc_request, .free_request = dwc3_gadget_ep_free_request, .queue = dwc3_gadget_ep_queue, .dequeue = dwc3_gadget_ep_dequeue, .set_halt = dwc3_gadget_ep_set_halt, .set_wedge = dwc3_gadget_ep_set_wedge, }; /* -------------------------------------------------------------------------- */ static int dwc3_gadget_get_frame(struct usb_gadget *g) { struct dwc3 *dwc = gadget_to_dwc(g); u32 reg; reg = dwc3_readl(dwc->regs, DWC3_DSTS); return DWC3_DSTS_SOFFN(reg); } static int dwc3_gadget_wakeup(struct usb_gadget *g) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long timeout; unsigned long flags; u32 reg; int ret = 0; u8 link_state; u8 speed; spin_lock_irqsave(&dwc->lock, flags); /* * According to the Databook Remote wakeup request should * be issued only when the device is in early suspend state. * * We can check that via USB Link State bits in DSTS register. */ reg = dwc3_readl(dwc->regs, DWC3_DSTS); speed = reg & DWC3_DSTS_CONNECTSPD; if (speed == DWC3_DSTS_SUPERSPEED) { dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n"); ret = -EINVAL; goto out; } link_state = DWC3_DSTS_USBLNKST(reg); switch (link_state) { case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ break; default: dev_dbg(dwc->dev, "can't wakeup from link state %d\n", link_state); ret = -EINVAL; goto out; } ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV); if (ret < 0) { dev_err(dwc->dev, "failed to put link in Recovery\n"); goto out; } /* Recent versions do this automatically */ if (dwc->revision < DWC3_REVISION_194A) { /* write zeroes to Link Change Request */ reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; dwc3_writel(dwc->regs, DWC3_DCTL, reg); } /* poll until Link State changes to ON */ timeout = jiffies + msecs_to_jiffies(100); while (!time_after(jiffies, timeout)) { reg = dwc3_readl(dwc->regs, DWC3_DSTS); /* in HS, means ON */ if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0) break; } if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) { dev_err(dwc->dev, "failed to send remote wakeup\n"); ret = -EINVAL; } out: spin_unlock_irqrestore(&dwc->lock, flags); return ret; } static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, int is_selfpowered) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); dwc->is_selfpowered = !!is_selfpowered; spin_unlock_irqrestore(&dwc->lock, flags); return 0; } static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) { u32 reg; u32 timeout = 500; reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (is_on) { if (dwc->revision <= DWC3_REVISION_187A) { reg &= ~DWC3_DCTL_TRGTULST_MASK; reg |= DWC3_DCTL_TRGTULST_RX_DET; } if (dwc->revision >= DWC3_REVISION_194A) reg &= ~DWC3_DCTL_KEEP_CONNECT; reg |= DWC3_DCTL_RUN_STOP; if (dwc->has_hibernation) reg |= DWC3_DCTL_KEEP_CONNECT; dwc->pullups_connected = true; } else { reg &= ~DWC3_DCTL_RUN_STOP; if (dwc->has_hibernation && !suspend) reg &= ~DWC3_DCTL_KEEP_CONNECT; dwc->pullups_connected = false; } dwc3_writel(dwc->regs, DWC3_DCTL, reg); do { reg = dwc3_readl(dwc->regs, DWC3_DSTS); if (is_on) { if (!(reg & DWC3_DSTS_DEVCTRLHLT)) break; } else { if (reg & DWC3_DSTS_DEVCTRLHLT) break; } timeout--; if (!timeout) return -ETIMEDOUT; udelay(1); } while (1); dev_vdbg(dwc->dev, "gadget %s data soft-%s\n", dwc->gadget_driver ? dwc->gadget_driver->function : "no-function", is_on ? "connect" : "disconnect"); return 0; } static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; int ret; is_on = !!is_on; spin_lock_irqsave(&dwc->lock, flags); ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; } static void dwc3_gadget_enable_irq(struct dwc3 *dwc) { u32 reg; /* Enable all but Start and End of Frame IRQs */ reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | DWC3_DEVTEN_EVNTOVERFLOWEN | DWC3_DEVTEN_CMDCMPLTEN | DWC3_DEVTEN_ERRTICERREN | DWC3_DEVTEN_WKUPEVTEN | DWC3_DEVTEN_ULSTCNGEN | DWC3_DEVTEN_CONNECTDONEEN | DWC3_DEVTEN_USBRSTEN | DWC3_DEVTEN_DISCONNEVTEN); dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); } static void dwc3_gadget_disable_irq(struct dwc3 *dwc) { /* mask all interrupts */ dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); } static irqreturn_t dwc3_interrupt(int irq, void *_dwc); static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc); static int dwc3_gadget_start(struct usb_gadget *g, struct usb_gadget_driver *driver) { struct dwc3 *dwc = gadget_to_dwc(g); struct dwc3_ep *dep; unsigned long flags; int ret = 0; int irq; u32 reg; irq = platform_get_irq(to_platform_device(dwc->dev), 0); ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc); if (ret) { dev_err(dwc->dev, "failed to request irq #%d --> %d\n", irq, ret); goto err0; } spin_lock_irqsave(&dwc->lock, flags); if (dwc->gadget_driver) { dev_err(dwc->dev, "%s is already bound to %s\n", dwc->gadget.name, dwc->gadget_driver->driver.name); ret = -EBUSY; goto err1; } dwc->gadget_driver = driver; reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg &= ~(DWC3_DCFG_SPEED_MASK); /** * WORKAROUND: DWC3 revision < 2.20a have an issue * which would cause metastability state on Run/Stop * bit if we try to force the IP to USB2-only mode. * * Because of that, we cannot configure the IP to any * speed other than the SuperSpeed * * Refers to: * * STAR#9000525659: Clock Domain Crossing on DCTL in * USB 2.0 Mode */ if (dwc->revision < DWC3_REVISION_220A) { reg |= DWC3_DCFG_SUPERSPEED; } else { switch (dwc->maximum_speed) { case USB_SPEED_LOW: reg |= DWC3_DSTS_LOWSPEED; break; case USB_SPEED_FULL: reg |= DWC3_DSTS_FULLSPEED1; break; case USB_SPEED_HIGH: reg |= DWC3_DSTS_HIGHSPEED; break; case USB_SPEED_SUPER: /* FALLTHROUGH */ case USB_SPEED_UNKNOWN: /* FALTHROUGH */ default: reg |= DWC3_DSTS_SUPERSPEED; } } dwc3_writel(dwc->regs, DWC3_DCFG, reg); dwc->start_config_issued = false; /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err2; } dep = dwc->eps[1]; ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err3; } /* begin to receive SETUP packets */ dwc->ep0state = EP0_SETUP_PHASE; dwc3_ep0_out_start(dwc); dwc3_gadget_enable_irq(dwc); spin_unlock_irqrestore(&dwc->lock, flags); return 0; err3: __dwc3_gadget_ep_disable(dwc->eps[0]); err2: dwc->gadget_driver = NULL; err1: spin_unlock_irqrestore(&dwc->lock, flags); free_irq(irq, dwc); err0: return ret; } static int dwc3_gadget_stop(struct usb_gadget *g, struct usb_gadget_driver *driver) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; int irq; spin_lock_irqsave(&dwc->lock, flags); dwc3_gadget_disable_irq(dwc); __dwc3_gadget_ep_disable(dwc->eps[0]); __dwc3_gadget_ep_disable(dwc->eps[1]); dwc->gadget_driver = NULL; spin_unlock_irqrestore(&dwc->lock, flags); irq = platform_get_irq(to_platform_device(dwc->dev), 0); free_irq(irq, dwc); return 0; } static const struct usb_gadget_ops dwc3_gadget_ops = { .get_frame = dwc3_gadget_get_frame, .wakeup = dwc3_gadget_wakeup, .set_selfpowered = dwc3_gadget_set_selfpowered, .pullup = dwc3_gadget_pullup, .udc_start = dwc3_gadget_start, .udc_stop = dwc3_gadget_stop, }; /* -------------------------------------------------------------------------- */ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc, u8 num, u32 direction) { struct dwc3_ep *dep; u8 i; for (i = 0; i < num; i++) { u8 epnum = (i << 1) | (!!direction); dep = kzalloc(sizeof(*dep), GFP_KERNEL); if (!dep) return -ENOMEM; dep->dwc = dwc; dep->number = epnum; dep->direction = !!direction; dwc->eps[epnum] = dep; snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1, (epnum & 1) ? "in" : "out"); dep->endpoint.name = dep->name; dev_vdbg(dwc->dev, "initializing %s\n", dep->name); if (epnum == 0 || epnum == 1) { usb_ep_set_maxpacket_limit(&dep->endpoint, 512); dep->endpoint.maxburst = 1; dep->endpoint.ops = &dwc3_gadget_ep0_ops; if (!epnum) dwc->gadget.ep0 = &dep->endpoint; } else { int ret; usb_ep_set_maxpacket_limit(&dep->endpoint, 1024); dep->endpoint.max_streams = 15; dep->endpoint.ops = &dwc3_gadget_ep_ops; list_add_tail(&dep->endpoint.ep_list, &dwc->gadget.ep_list); ret = dwc3_alloc_trb_pool(dep); if (ret) return ret; } INIT_LIST_HEAD(&dep->request_list); INIT_LIST_HEAD(&dep->req_queued); } return 0; } static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) { int ret; INIT_LIST_HEAD(&dwc->gadget.ep_list); ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0); if (ret < 0) { dev_vdbg(dwc->dev, "failed to allocate OUT endpoints\n"); return ret; } ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1); if (ret < 0) { dev_vdbg(dwc->dev, "failed to allocate IN endpoints\n"); return ret; } return 0; } static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) { struct dwc3_ep *dep; u8 epnum; for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { dep = dwc->eps[epnum]; if (!dep) continue; /* * Physical endpoints 0 and 1 are special; they form the * bi-directional USB endpoint 0. * * For those two physical endpoints, we don't allocate a TRB * pool nor do we add them the endpoints list. Due to that, we * shouldn't do these two operations otherwise we would end up * with all sorts of bugs when removing dwc3.ko. */ if (epnum != 0 && epnum != 1) { dwc3_free_trb_pool(dep); list_del(&dep->endpoint.ep_list); } kfree(dep); } } /* -------------------------------------------------------------------------- */ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req, struct dwc3_trb *trb, const struct dwc3_event_depevt *event, int status) { unsigned int count; unsigned int s_pkt = 0; unsigned int trb_status; trace_dwc3_complete_trb(dep, trb); if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) /* * We continue despite the error. There is not much we * can do. If we don't clean it up we loop forever. If * we skip the TRB then it gets overwritten after a * while since we use them in a ring buffer. A BUG() * would help. Lets hope that if this occurs, someone * fixes the root cause instead of looking away :) */ dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", dep->name, trb); count = trb->size & DWC3_TRB_SIZE_MASK; if (dep->direction) { if (count) { trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (trb_status == DWC3_TRBSTS_MISSED_ISOC) { dev_dbg(dwc->dev, "incomplete IN transfer %s\n", dep->name); /* * If missed isoc occurred and there is * no request queued then issue END * TRANSFER, so that core generates * next xfernotready and we will issue * a fresh START TRANSFER. * If there are still queued request * then wait, do not issue either END * or UPDATE TRANSFER, just attach next * request in request_list during * giveback.If any future queued request * is successfully transferred then we * will issue UPDATE TRANSFER for all * request in the request_list. */ dep->flags |= DWC3_EP_MISSED_ISOC; } else { dev_err(dwc->dev, "incomplete IN transfer %s\n", dep->name); status = -ECONNRESET; } } else { dep->flags &= ~DWC3_EP_MISSED_ISOC; } } else { if (count && (event->status & DEPEVT_STATUS_SHORT)) s_pkt = 1; } /* * We assume here we will always receive the entire data block * which we should receive. Meaning, if we program RX to * receive 4K but we receive only 2K, we assume that's all we * should receive and we simply bounce the request back to the * gadget driver for further processing. */ req->request.actual += req->request.length - count; if (s_pkt) return 1; if ((event->status & DEPEVT_STATUS_LST) && (trb->ctrl & (DWC3_TRB_CTRL_LST | DWC3_TRB_CTRL_HWO))) return 1; if ((event->status & DEPEVT_STATUS_IOC) && (trb->ctrl & DWC3_TRB_CTRL_IOC)) return 1; return 0; } static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, const struct dwc3_event_depevt *event, int status) { struct dwc3_request *req; struct dwc3_trb *trb; unsigned int slot; unsigned int i; int ret; do { req = next_request(&dep->req_queued); if (!req) { WARN_ON_ONCE(1); return 1; } i = 0; do { slot = req->start_slot + i; if ((slot == DWC3_TRB_NUM - 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc)) slot++; slot %= DWC3_TRB_NUM; trb = &dep->trb_pool[slot]; ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status); if (ret) break; }while (++i < req->request.num_mapped_sgs); dwc3_gadget_giveback(dep, req, status); if (ret) break; } while (1); if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && list_empty(&dep->req_queued)) { if (list_empty(&dep->request_list)) { /* * If there is no entry in request list then do * not issue END TRANSFER now. Just set PENDING * flag, so that END TRANSFER is issued when an * entry is added into request list. */ dep->flags = DWC3_EP_PENDING_REQUEST; } else { dwc3_stop_active_transfer(dwc, dep->number, true); dep->flags = DWC3_EP_ENABLED; } return 1; } return 1; } static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { unsigned status = 0; int clean_busy; if (event->status & DEPEVT_STATUS_BUSERR) status = -ECONNRESET; clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); if (clean_busy) dep->flags &= ~DWC3_EP_BUSY; /* * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround. * See dwc3_gadget_linksts_change_interrupt() for 1st half. */ if (dwc->revision < DWC3_REVISION_183A) { u32 reg; int i; for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { dep = dwc->eps[i]; if (!(dep->flags & DWC3_EP_ENABLED)) continue; if (!list_empty(&dep->req_queued)) return; } reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= dwc->u1u2; dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc->u1u2 = 0; } } static void dwc3_endpoint_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event) { struct dwc3_ep *dep; u8 epnum = event->endpoint_number; dep = dwc->eps[epnum]; if (!(dep->flags & DWC3_EP_ENABLED)) return; if (epnum == 0 || epnum == 1) { dwc3_ep0_interrupt(dwc, event); return; } switch (event->endpoint_event) { case DWC3_DEPEVT_XFERCOMPLETE: dep->resource_index = 0; if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n", dep->name); return; } dwc3_endpoint_transfer_complete(dwc, dep, event); break; case DWC3_DEPEVT_XFERINPROGRESS: dwc3_endpoint_transfer_complete(dwc, dep, event); break; case DWC3_DEPEVT_XFERNOTREADY: if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dwc3_gadget_start_isoc(dwc, dep, event); } else { int ret; dev_vdbg(dwc->dev, "%s: reason %s\n", dep->name, event->status & DEPEVT_STATUS_TRANSFER_ACTIVE ? "Transfer Active" : "Transfer Not Active"); ret = __dwc3_gadget_kick_transfer(dep, 0, 1); if (!ret || ret == -EBUSY) return; dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); } break; case DWC3_DEPEVT_STREAMEVT: if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) { dev_err(dwc->dev, "Stream event for non-Bulk %s\n", dep->name); return; } switch (event->status) { case DEPEVT_STREAMEVT_FOUND: dev_vdbg(dwc->dev, "Stream %d found and started\n", event->parameters); break; case DEPEVT_STREAMEVT_NOTFOUND: /* FALLTHROUGH */ default: dev_dbg(dwc->dev, "Couldn't find suitable stream\n"); } break; case DWC3_DEPEVT_RXTXFIFOEVT: dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name); break; case DWC3_DEPEVT_EPCMDCMPLT: dev_vdbg(dwc->dev, "Endpoint Command Complete\n"); break; } } static void dwc3_disconnect_gadget(struct dwc3 *dwc) { if (dwc->gadget_driver && dwc->gadget_driver->disconnect) { spin_unlock(&dwc->lock); dwc->gadget_driver->disconnect(&dwc->gadget); spin_lock(&dwc->lock); } } static void dwc3_suspend_gadget(struct dwc3 *dwc) { if (dwc->gadget_driver && dwc->gadget_driver->suspend) { spin_unlock(&dwc->lock); dwc->gadget_driver->suspend(&dwc->gadget); spin_lock(&dwc->lock); } } static void dwc3_resume_gadget(struct dwc3 *dwc) { if (dwc->gadget_driver && dwc->gadget_driver->resume) { spin_unlock(&dwc->lock); dwc->gadget_driver->resume(&dwc->gadget); spin_lock(&dwc->lock); } } static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) { struct dwc3_ep *dep; struct dwc3_gadget_ep_cmd_params params; u32 cmd; int ret; dep = dwc->eps[epnum]; if (!dep->resource_index) return; /* * NOTICE: We are violating what the Databook says about the * EndTransfer command. Ideally we would _always_ wait for the * EndTransfer Command Completion IRQ, but that's causing too * much trouble synchronizing between us and gadget driver. * * We have discussed this with the IP Provider and it was * suggested to giveback all requests here, but give HW some * extra time to synchronize with the interconnect. We're using * an arbitraty 100us delay for that. * * Note also that a similar handling was tested by Synopsys * (thanks a lot Paul) and nothing bad has come out of it. * In short, what we're doing is: * * - Issue EndTransfer WITH CMDIOC bit set * - Wait 100us */ cmd = DWC3_DEPCMD_ENDTRANSFER; cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0; cmd |= DWC3_DEPCMD_CMDIOC; cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); memset(¶ms, 0, sizeof(params)); ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; dep->flags &= ~DWC3_EP_BUSY; udelay(100); } static void dwc3_stop_active_transfers(struct dwc3 *dwc) { u32 epnum; for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) { struct dwc3_ep *dep; dep = dwc->eps[epnum]; if (!dep) continue; if (!(dep->flags & DWC3_EP_ENABLED)) continue; dwc3_remove_requests(dwc, dep); } } static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) { u32 epnum; for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) { struct dwc3_ep *dep; struct dwc3_gadget_ep_cmd_params params; int ret; dep = dwc->eps[epnum]; if (!dep) continue; if (!(dep->flags & DWC3_EP_STALL)) continue; dep->flags &= ~DWC3_EP_STALL; memset(¶ms, 0, sizeof(params)); ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_CLEARSTALL, ¶ms); WARN_ON_ONCE(ret); } } static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) { int reg; reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_INITU1ENA; dwc3_writel(dwc->regs, DWC3_DCTL, reg); reg &= ~DWC3_DCTL_INITU2ENA; dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc3_disconnect_gadget(dwc); dwc->start_config_issued = false; dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->setup_packet_pending = false; } static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) { u32 reg; /* * WORKAROUND: DWC3 revisions <1.88a have an issue which * would cause a missing Disconnect Event if there's a * pending Setup Packet in the FIFO. * * There's no suggested workaround on the official Bug * report, which states that "unless the driver/application * is doing any special handling of a disconnect event, * there is no functional issue". * * Unfortunately, it turns out that we _do_ some special * handling of a disconnect event, namely complete all * pending transfers, notify gadget driver of the * disconnection, and so on. * * Our suggested workaround is to follow the Disconnect * Event steps here, instead, based on a setup_packet_pending * flag. Such flag gets set whenever we have a XferNotReady * event on EP0 and gets cleared on XferComplete for the * same endpoint. * * Refers to: * * STAR#9000466709: RTL: Device : Disconnect event not * generated if setup packet pending in FIFO */ if (dwc->revision < DWC3_REVISION_188A) { if (dwc->setup_packet_pending) dwc3_gadget_disconnect_interrupt(dwc); } /* after reset -> Default State */ usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT); if (dwc->gadget.speed != USB_SPEED_UNKNOWN) dwc3_disconnect_gadget(dwc); reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc->test_mode = false; dwc3_stop_active_transfers(dwc); dwc3_clear_stall_all_ep(dwc); dwc->start_config_issued = false; /* Reset device address to zero */ reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg &= ~(DWC3_DCFG_DEVADDR_MASK); dwc3_writel(dwc->regs, DWC3_DCFG, reg); } static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed) { u32 reg; u32 usb30_clock = DWC3_GCTL_CLK_BUS; /* * We change the clock only at SS but I dunno why I would want to do * this. Maybe it becomes part of the power saving plan. */ if (speed != DWC3_DSTS_SUPERSPEED) return; /* * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed * each time on Connect Done. */ if (!usb30_clock) return; reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock); dwc3_writel(dwc->regs, DWC3_GCTL, reg); } static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) { struct dwc3_ep *dep; int ret; u32 reg; u8 speed; reg = dwc3_readl(dwc->regs, DWC3_DSTS); speed = reg & DWC3_DSTS_CONNECTSPD; dwc->speed = speed; dwc3_update_ram_clk_sel(dwc, speed); switch (speed) { case DWC3_DCFG_SUPERSPEED: /* * WORKAROUND: DWC3 revisions <1.90a have an issue which * would cause a missing USB3 Reset event. * * In such situations, we should force a USB3 Reset * event by calling our dwc3_gadget_reset_interrupt() * routine. * * Refers to: * * STAR#9000483510: RTL: SS : USB3 reset event may * not be generated always when the link enters poll */ if (dwc->revision < DWC3_REVISION_190A) dwc3_gadget_reset_interrupt(dwc); dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dwc->gadget.ep0->maxpacket = 512; dwc->gadget.speed = USB_SPEED_SUPER; break; case DWC3_DCFG_HIGHSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); dwc->gadget.ep0->maxpacket = 64; dwc->gadget.speed = USB_SPEED_HIGH; break; case DWC3_DCFG_FULLSPEED2: case DWC3_DCFG_FULLSPEED1: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); dwc->gadget.ep0->maxpacket = 64; dwc->gadget.speed = USB_SPEED_FULL; break; case DWC3_DCFG_LOWSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); dwc->gadget.ep0->maxpacket = 8; dwc->gadget.speed = USB_SPEED_LOW; break; } /* Enable USB2 LPM Capability */ if ((dwc->revision > DWC3_REVISION_194A) && (speed != DWC3_DCFG_SUPERSPEED)) { reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg |= DWC3_DCFG_LPM_CAP; dwc3_writel(dwc->regs, DWC3_DCFG, reg); reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); /* * TODO: This should be configurable. For now using * maximum allowed HIRD threshold value of 0b1100 */ reg |= DWC3_DCTL_HIRD_THRES(12); dwc3_writel(dwc->regs, DWC3_DCTL, reg); } else { reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_HIRD_THRES_MASK; dwc3_writel(dwc->regs, DWC3_DCTL, reg); } dep = dwc->eps[0]; ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; } dep = dwc->eps[1]; ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true, false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; } /* * Configure PHY via GUSB3PIPECTLn if required. * * Update GTXFIFOSIZn * * In both cases reset values should be sufficient. */ } static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) { /* * TODO take core out of low power mode when that's * implemented. */ dwc->gadget_driver->resume(&dwc->gadget); } static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, unsigned int evtinfo) { enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK; unsigned int pwropt; /* * WORKAROUND: DWC3 < 2.50a have an issue when configured without * Hibernation mode enabled which would show up when device detects * host-initiated U3 exit. * * In that case, device will generate a Link State Change Interrupt * from U3 to RESUME which is only necessary if Hibernation is * configured in. * * There are no functional changes due to such spurious event and we * just need to ignore it. * * Refers to: * * STAR#9000570034 RTL: SS Resume event generated in non-Hibernation * operational mode */ pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1); if ((dwc->revision < DWC3_REVISION_250A) && (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) { if ((dwc->link_state == DWC3_LINK_STATE_U3) && (next == DWC3_LINK_STATE_RESUME)) { dev_vdbg(dwc->dev, "ignoring transition U3 -> Resume\n"); return; } } /* * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending * on the link partner, the USB session might do multiple entry/exit * of low power states before a transfer takes place. * * Due to this problem, we might experience lower throughput. The * suggested workaround is to disable DCTL[12:9] bits if we're * transitioning from U1/U2 to U0 and enable those bits again * after a transfer completes and there are no pending transfers * on any of the enabled endpoints. * * This is the first half of that workaround. * * Refers to: * * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us * core send LGO_Ux entering U0 */ if (dwc->revision < DWC3_REVISION_183A) { if (next == DWC3_LINK_STATE_U0) { u32 u1u2; u32 reg; switch (dwc->link_state) { case DWC3_LINK_STATE_U1: case DWC3_LINK_STATE_U2: reg = dwc3_readl(dwc->regs, DWC3_DCTL); u1u2 = reg & (DWC3_DCTL_INITU2ENA | DWC3_DCTL_ACCEPTU2ENA | DWC3_DCTL_INITU1ENA | DWC3_DCTL_ACCEPTU1ENA); if (!dwc->u1u2) dwc->u1u2 = reg & u1u2; reg &= ~u1u2; dwc3_writel(dwc->regs, DWC3_DCTL, reg); break; default: /* do nothing */ break; } } } switch (next) { case DWC3_LINK_STATE_U1: if (dwc->speed == USB_SPEED_SUPER) dwc3_suspend_gadget(dwc); break; case DWC3_LINK_STATE_U2: case DWC3_LINK_STATE_U3: dwc3_suspend_gadget(dwc); break; case DWC3_LINK_STATE_RESUME: dwc3_resume_gadget(dwc); break; default: /* do nothing */ break; } dwc->link_state = next; } static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc, unsigned int evtinfo) { unsigned int is_ss = evtinfo & BIT(4); /** * WORKAROUND: DWC3 revison 2.20a with hibernation support * have a known issue which can cause USB CV TD.9.23 to fail * randomly. * * Because of this issue, core could generate bogus hibernation * events which SW needs to ignore. * * Refers to: * * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0 * Device Fallback from SuperSpeed */ if (is_ss ^ (dwc->speed == USB_SPEED_SUPER)) return; /* enter hibernation here */ } static void dwc3_gadget_interrupt(struct dwc3 *dwc, const struct dwc3_event_devt *event) { switch (event->type) { case DWC3_DEVICE_EVENT_DISCONNECT: dwc3_gadget_disconnect_interrupt(dwc); break; case DWC3_DEVICE_EVENT_RESET: dwc3_gadget_reset_interrupt(dwc); break; case DWC3_DEVICE_EVENT_CONNECT_DONE: dwc3_gadget_conndone_interrupt(dwc); break; case DWC3_DEVICE_EVENT_WAKEUP: dwc3_gadget_wakeup_interrupt(dwc); break; case DWC3_DEVICE_EVENT_HIBER_REQ: if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation, "unexpected hibernation event\n")) break; dwc3_gadget_hibernation_interrupt(dwc, event->event_info); break; case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: dwc3_gadget_linksts_change_interrupt(dwc, event->event_info); break; case DWC3_DEVICE_EVENT_EOPF: dev_vdbg(dwc->dev, "End of Periodic Frame\n"); break; case DWC3_DEVICE_EVENT_SOF: dev_vdbg(dwc->dev, "Start of Periodic Frame\n"); break; case DWC3_DEVICE_EVENT_ERRATIC_ERROR: dev_vdbg(dwc->dev, "Erratic Error\n"); break; case DWC3_DEVICE_EVENT_CMD_CMPL: dev_vdbg(dwc->dev, "Command Complete\n"); break; case DWC3_DEVICE_EVENT_OVERFLOW: dev_vdbg(dwc->dev, "Overflow\n"); break; default: dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type); } } static void dwc3_process_event_entry(struct dwc3 *dwc, const union dwc3_event *event) { trace_dwc3_event(event->raw); /* Endpoint IRQ, handle it and return early */ if (event->type.is_devspec == 0) { /* depevt */ return dwc3_endpoint_interrupt(dwc, &event->depevt); } switch (event->type.type) { case DWC3_EVENT_TYPE_DEV: dwc3_gadget_interrupt(dwc, &event->devt); break; /* REVISIT what to do with Carkit and I2C events ? */ default: dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw); } } static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf) { struct dwc3_event_buffer *evt; irqreturn_t ret = IRQ_NONE; int left; u32 reg; evt = dwc->ev_buffs[buf]; left = evt->count; if (!(evt->flags & DWC3_EVENT_PENDING)) return IRQ_NONE; while (left > 0) { union dwc3_event event; event.raw = *(u32 *) (evt->buf + evt->lpos); dwc3_process_event_entry(dwc, &event); /* * FIXME we wrap around correctly to the next entry as * almost all entries are 4 bytes in size. There is one * entry which has 12 bytes which is a regular entry * followed by 8 bytes data. ATM I don't know how * things are organized if we get next to the a * boundary so I worry about that once we try to handle * that. */ evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE; left -= 4; dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4); } evt->count = 0; evt->flags &= ~DWC3_EVENT_PENDING; ret = IRQ_HANDLED; /* Unmask interrupt */ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf)); reg &= ~DWC3_GEVNTSIZ_INTMASK; dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg); return ret; } static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc) { struct dwc3 *dwc = _dwc; unsigned long flags; irqreturn_t ret = IRQ_NONE; int i; spin_lock_irqsave(&dwc->lock, flags); for (i = 0; i < dwc->num_event_buffers; i++) ret |= dwc3_process_event_buf(dwc, i); spin_unlock_irqrestore(&dwc->lock, flags); return ret; } static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf) { struct dwc3_event_buffer *evt; u32 count; u32 reg; evt = dwc->ev_buffs[buf]; count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf)); count &= DWC3_GEVNTCOUNT_MASK; if (!count) return IRQ_NONE; evt->count = count; evt->flags |= DWC3_EVENT_PENDING; /* Mask interrupt */ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf)); reg |= DWC3_GEVNTSIZ_INTMASK; dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg); return IRQ_WAKE_THREAD; } static irqreturn_t dwc3_interrupt(int irq, void *_dwc) { struct dwc3 *dwc = _dwc; int i; irqreturn_t ret = IRQ_NONE; spin_lock(&dwc->lock); for (i = 0; i < dwc->num_event_buffers; i++) { irqreturn_t status; status = dwc3_check_event_buf(dwc, i); if (status == IRQ_WAKE_THREAD) ret = status; } spin_unlock(&dwc->lock); return ret; } /** * dwc3_gadget_init - Initializes gadget related registers * @dwc: pointer to our controller context structure * * Returns 0 on success otherwise negative errno. */ int dwc3_gadget_init(struct dwc3 *dwc) { int ret; dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req), &dwc->ctrl_req_addr, GFP_KERNEL); if (!dwc->ctrl_req) { dev_err(dwc->dev, "failed to allocate ctrl request\n"); ret = -ENOMEM; goto err0; } dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb), &dwc->ep0_trb_addr, GFP_KERNEL); if (!dwc->ep0_trb) { dev_err(dwc->dev, "failed to allocate ep0 trb\n"); ret = -ENOMEM; goto err1; } dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL); if (!dwc->setup_buf) { ret = -ENOMEM; goto err2; } dwc->ep0_bounce = dma_alloc_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr, GFP_KERNEL); if (!dwc->ep0_bounce) { dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n"); ret = -ENOMEM; goto err3; } dwc->gadget.ops = &dwc3_gadget_ops; dwc->gadget.max_speed = USB_SPEED_SUPER; dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; /* * Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize * on ep out. */ dwc->gadget.quirk_ep_out_aligned_size = true; /* * REVISIT: Here we should clear all pending IRQs to be * sure we're starting from a well known location. */ ret = dwc3_gadget_init_endpoints(dwc); if (ret) goto err4; ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); if (ret) { dev_err(dwc->dev, "failed to register udc\n"); goto err4; } return 0; err4: dwc3_gadget_free_endpoints(dwc); dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, dwc->ep0_bounce, dwc->ep0_bounce_addr); err3: kfree(dwc->setup_buf); err2: dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), dwc->ep0_trb, dwc->ep0_trb_addr); err1: dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), dwc->ctrl_req, dwc->ctrl_req_addr); err0: return ret; } /* -------------------------------------------------------------------------- */ void dwc3_gadget_exit(struct dwc3 *dwc) { usb_del_gadget_udc(&dwc->gadget); dwc3_gadget_free_endpoints(dwc); dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, dwc->ep0_bounce, dwc->ep0_bounce_addr); kfree(dwc->setup_buf); dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), dwc->ep0_trb, dwc->ep0_trb_addr); dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), dwc->ctrl_req, dwc->ctrl_req_addr); } int dwc3_gadget_prepare(struct dwc3 *dwc) { if (dwc->pullups_connected) { dwc3_gadget_disable_irq(dwc); dwc3_gadget_run_stop(dwc, true, true); } return 0; } void dwc3_gadget_complete(struct dwc3 *dwc) { if (dwc->pullups_connected) { dwc3_gadget_enable_irq(dwc); dwc3_gadget_run_stop(dwc, true, false); } } int dwc3_gadget_suspend(struct dwc3 *dwc) { __dwc3_gadget_ep_disable(dwc->eps[0]); __dwc3_gadget_ep_disable(dwc->eps[1]); dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG); return 0; } int dwc3_gadget_resume(struct dwc3 *dwc) { struct dwc3_ep *dep; int ret; /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, false); if (ret) goto err0; dep = dwc->eps[1]; ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, false); if (ret) goto err1; /* begin to receive SETUP packets */ dwc->ep0state = EP0_SETUP_PHASE; dwc3_ep0_out_start(dwc); dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg); return 0; err1: __dwc3_gadget_ep_disable(dwc->eps[0]); err0: return ret; }