/* * f_serial.c - generic USB serial function driver * * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) * Copyright (C) 2008 by David Brownell * Copyright (C) 2008 by Nokia Corporation * * This software is distributed under the terms of the GNU General * Public License ("GPL") as published by the Free Software Foundation, * either version 2 of that License or (at your option) any later version. */ #include #include #include #include #include "u_serial.h" #include "gadget_chips.h" /* * This function packages a simple "generic serial" port with no real * control mechanisms, just raw data transfer over two bulk endpoints. * * Because it's not standardized, this isn't as interoperable as the * CDC ACM driver. However, for many purposes it's just as functional * if you can arrange appropriate host side drivers. */ struct f_gser { struct gserial port; u8 data_id; u8 port_num; }; static inline struct f_gser *func_to_gser(struct usb_function *f) { return container_of(f, struct f_gser, port.func); } /*-------------------------------------------------------------------------*/ /* interface descriptor: */ static struct usb_interface_descriptor gser_interface_desc = { .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, /* .iInterface = DYNAMIC */ }; /* full speed support: */ static struct usb_endpoint_descriptor gser_fs_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_endpoint_descriptor gser_fs_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; static struct usb_descriptor_header *gser_fs_function[] = { (struct usb_descriptor_header *) &gser_interface_desc, (struct usb_descriptor_header *) &gser_fs_in_desc, (struct usb_descriptor_header *) &gser_fs_out_desc, NULL, }; /* high speed support: */ static struct usb_endpoint_descriptor gser_hs_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor gser_hs_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *gser_hs_function[] = { (struct usb_descriptor_header *) &gser_interface_desc, (struct usb_descriptor_header *) &gser_hs_in_desc, (struct usb_descriptor_header *) &gser_hs_out_desc, NULL, }; static struct usb_endpoint_descriptor gser_ss_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; static struct usb_endpoint_descriptor gser_ss_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = { .bLength = sizeof gser_ss_bulk_comp_desc, .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, }; static struct usb_descriptor_header *gser_ss_function[] = { (struct usb_descriptor_header *) &gser_interface_desc, (struct usb_descriptor_header *) &gser_ss_in_desc, (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc, (struct usb_descriptor_header *) &gser_ss_out_desc, (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc, NULL, }; /* string descriptors: */ static struct usb_string gser_string_defs[] = { [0].s = "Generic Serial", { } /* end of list */ }; static struct usb_gadget_strings gser_string_table = { .language = 0x0409, /* en-us */ .strings = gser_string_defs, }; static struct usb_gadget_strings *gser_strings[] = { &gser_string_table, NULL, }; /*-------------------------------------------------------------------------*/ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct f_gser *gser = func_to_gser(f); struct usb_composite_dev *cdev = f->config->cdev; /* we know alt == 0, so this is an activation or a reset */ if (gser->port.in->driver_data) { DBG(cdev, "reset generic ttyGS%d\n", gser->port_num); gserial_disconnect(&gser->port); } if (!gser->port.in->desc || !gser->port.out->desc) { DBG(cdev, "activate generic ttyGS%d\n", gser->port_num); if (config_ep_by_speed(cdev->gadget, f, gser->port.in) || config_ep_by_speed(cdev->gadget, f, gser->port.out)) { gser->port.in->desc = NULL; gser->port.out->desc = NULL; return -EINVAL; } } gserial_connect(&gser->port, gser->port_num); return 0; } static void gser_disable(struct usb_function *f) { struct f_gser *gser = func_to_gser(f); struct usb_composite_dev *cdev = f->config->cdev; DBG(cdev, "generic ttyGS%d deactivated\n", gser->port_num); gserial_disconnect(&gser->port); } /*-------------------------------------------------------------------------*/ /* serial function driver setup/binding */ static int gser_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct f_gser *gser = func_to_gser(f); int status; struct usb_ep *ep; /* REVISIT might want instance-specific strings to help * distinguish instances ... */ /* maybe allocate device-global string ID */ if (gser_string_defs[0].id == 0) { status = usb_string_id(c->cdev); if (status < 0) return status; gser_string_defs[0].id = status; } /* allocate instance-specific interface IDs */ status = usb_interface_id(c, f); if (status < 0) goto fail; gser->data_id = status; gser_interface_desc.bInterfaceNumber = status; status = -ENODEV; /* allocate instance-specific endpoints */ ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_in_desc); if (!ep) goto fail; gser->port.in = ep; ep->driver_data = cdev; /* claim */ ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_out_desc); if (!ep) goto fail; gser->port.out = ep; ep->driver_data = cdev; /* claim */ /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress; gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress; gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress; status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function, gser_ss_function); if (status) goto fail; DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n", gser->port_num, gadget_is_superspeed(c->cdev->gadget) ? "super" : gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", gser->port.in->name, gser->port.out->name); return 0; fail: /* we might as well release our claims on endpoints */ if (gser->port.out) gser->port.out->driver_data = NULL; if (gser->port.in) gser->port.in->driver_data = NULL; ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); return status; } static void gser_free_inst(struct usb_function_instance *f) { struct f_serial_opts *opts; opts = container_of(f, struct f_serial_opts, func_inst); gserial_free_line(opts->port_num); kfree(opts); } static struct usb_function_instance *gser_alloc_inst(void) { struct f_serial_opts *opts; int ret; opts = kzalloc(sizeof(*opts), GFP_KERNEL); if (!opts) return ERR_PTR(-ENOMEM); opts->func_inst.free_func_inst = gser_free_inst; ret = gserial_alloc_line(&opts->port_num); if (ret) { kfree(opts); return ERR_PTR(ret); } return &opts->func_inst; } static void gser_free(struct usb_function *f) { struct f_gser *serial; serial = func_to_gser(f); kfree(serial); } static void gser_unbind(struct usb_configuration *c, struct usb_function *f) { usb_free_all_descriptors(f); } struct usb_function *gser_alloc(struct usb_function_instance *fi) { struct f_gser *gser; struct f_serial_opts *opts; /* allocate and initialize one new instance */ gser = kzalloc(sizeof(*gser), GFP_KERNEL); if (!gser) return ERR_PTR(-ENOMEM); opts = container_of(fi, struct f_serial_opts, func_inst); gser->port_num = opts->port_num; gser->port.func.name = "gser"; gser->port.func.strings = gser_strings; gser->port.func.bind = gser_bind; gser->port.func.unbind = gser_unbind; gser->port.func.set_alt = gser_set_alt; gser->port.func.disable = gser_disable; gser->port.func.free_func = gser_free; return &gser->port.func; } DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Al Borchers"); MODULE_AUTHOR("David Brownell");