/* * linux/drivers/usb/gadget/lh7a40x_udc.c * Sharp LH7A40x on-chip full speed USB device controllers * * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID * Copyright (C) 2004 Bo Henriksen, Nordic ID * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #include #include "lh7a40x_udc.h" //#define DEBUG printk //#define DEBUG_EP0 printk //#define DEBUG_SETUP printk #ifndef DEBUG_EP0 # define DEBUG_EP0(fmt,args...) #endif #ifndef DEBUG_SETUP # define DEBUG_SETUP(fmt,args...) #endif #ifndef DEBUG # define NO_STATES # define DEBUG(fmt,args...) #endif #define DRIVER_DESC "LH7A40x USB Device Controller" #define DRIVER_VERSION __DATE__ #ifndef _BIT /* FIXME - what happended to _BIT in 2.6.7bk18? */ #define _BIT(x) (1<<(x)) #endif struct lh7a40x_udc *the_controller; static const char driver_name[] = "lh7a40x_udc"; static const char driver_desc[] = DRIVER_DESC; static const char ep0name[] = "ep0-control"; /* Local definintions. */ #ifndef NO_STATES static char *state_names[] = { "WAIT_FOR_SETUP", "DATA_STATE_XMIT", "DATA_STATE_NEED_ZLP", "WAIT_FOR_OUT_STATUS", "DATA_STATE_RECV" }; #endif /* Local declarations. */ static int lh7a40x_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *); static int lh7a40x_ep_disable(struct usb_ep *ep); static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, gfp_t); static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *); static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t); static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *); static int lh7a40x_set_halt(struct usb_ep *ep, int); static int lh7a40x_fifo_status(struct usb_ep *ep); static void lh7a40x_fifo_flush(struct usb_ep *ep); static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep); static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr); static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status); static void pio_irq_enable(int bEndpointAddress); static void pio_irq_disable(int bEndpointAddress); static void stop_activity(struct lh7a40x_udc *dev, struct usb_gadget_driver *driver); static void flush(struct lh7a40x_ep *ep); static void udc_enable(struct lh7a40x_udc *dev); static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address); static struct usb_ep_ops lh7a40x_ep_ops = { .enable = lh7a40x_ep_enable, .disable = lh7a40x_ep_disable, .alloc_request = lh7a40x_alloc_request, .free_request = lh7a40x_free_request, .queue = lh7a40x_queue, .dequeue = lh7a40x_dequeue, .set_halt = lh7a40x_set_halt, .fifo_status = lh7a40x_fifo_status, .fifo_flush = lh7a40x_fifo_flush, }; /* Inline code */ static __inline__ int write_packet(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int max) { u8 *buf; int length, count; volatile u32 *fifo = (volatile u32 *)ep->fifo; buf = req->req.buf + req->req.actual; prefetch(buf); length = req->req.length - req->req.actual; length = min(length, max); req->req.actual += length; DEBUG("Write %d (max %d), fifo %p\n", length, max, fifo); count = length; while (count--) { *fifo = *buf++; } return length; } static __inline__ void usb_set_index(u32 ep) { *(volatile u32 *)io_p2v(USB_INDEX) = ep; } static __inline__ u32 usb_read(u32 port) { return *(volatile u32 *)io_p2v(port); } static __inline__ void usb_write(u32 val, u32 port) { *(volatile u32 *)io_p2v(port) = val; } static __inline__ void usb_set(u32 val, u32 port) { volatile u32 *ioport = (volatile u32 *)io_p2v(port); u32 after = (*ioport) | val; *ioport = after; } static __inline__ void usb_clear(u32 val, u32 port) { volatile u32 *ioport = (volatile u32 *)io_p2v(port); u32 after = (*ioport) & ~val; *ioport = after; } /*-------------------------------------------------------------------------*/ #define GPIO_PORTC_DR (0x80000E08) #define GPIO_PORTC_DDR (0x80000E18) #define GPIO_PORTC_PDR (0x80000E70) /* get port C pin data register */ #define get_portc_pdr(bit) ((usb_read(GPIO_PORTC_PDR) & _BIT(bit)) != 0) /* get port C data direction register */ #define get_portc_ddr(bit) ((usb_read(GPIO_PORTC_DDR) & _BIT(bit)) != 0) /* set port C data register */ #define set_portc_dr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DR) : usb_clear(_BIT(bit), GPIO_PORTC_DR)) /* set port C data direction register */ #define set_portc_ddr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DDR) : usb_clear(_BIT(bit), GPIO_PORTC_DDR)) /* * LPD7A404 GPIO's: * Port C bit 1 = USB Port 1 Power Enable * Port C bit 2 = USB Port 1 Data Carrier Detect */ #define is_usb_connected() get_portc_pdr(2) #ifdef CONFIG_USB_GADGET_DEBUG_FILES static const char proc_node_name[] = "driver/udc"; static int udc_proc_read(char *page, char **start, off_t off, int count, int *eof, void *_dev) { char *buf = page; struct lh7a40x_udc *dev = _dev; char *next = buf; unsigned size = count; unsigned long flags; int t; if (off != 0) return 0; local_irq_save(flags); /* basic device status */ t = scnprintf(next, size, DRIVER_DESC "\n" "%s version: %s\n" "Gadget driver: %s\n" "Host: %s\n\n", driver_name, DRIVER_VERSION, dev->driver ? dev->driver->driver.name : "(none)", is_usb_connected()? "full speed" : "disconnected"); size -= t; next += t; t = scnprintf(next, size, "GPIO:\n" " Port C bit 1: %d, dir %d\n" " Port C bit 2: %d, dir %d\n\n", get_portc_pdr(1), get_portc_ddr(1), get_portc_pdr(2), get_portc_ddr(2) ); size -= t; next += t; t = scnprintf(next, size, "DCP pullup: %d\n\n", (usb_read(USB_PM) & PM_USB_DCP) != 0); size -= t; next += t; local_irq_restore(flags); *eof = 1; return count - size; } #define create_proc_files() create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev) #define remove_proc_files() remove_proc_entry(proc_node_name, NULL) #else /* !CONFIG_USB_GADGET_DEBUG_FILES */ #define create_proc_files() do {} while (0) #define remove_proc_files() do {} while (0) #endif /* CONFIG_USB_GADGET_DEBUG_FILES */ /* * udc_disable - disable USB device controller */ static void udc_disable(struct lh7a40x_udc *dev) { DEBUG("%s, %p\n", __func__, dev); udc_set_address(dev, 0); /* Disable interrupts */ usb_write(0, USB_IN_INT_EN); usb_write(0, USB_OUT_INT_EN); usb_write(0, USB_INT_EN); /* Disable the USB */ usb_write(0, USB_PM); #ifdef CONFIG_ARCH_LH7A404 /* Disable USB power */ set_portc_dr(1, 0); #endif /* if hardware supports it, disconnect from usb */ /* make_usb_disappear(); */ dev->ep0state = WAIT_FOR_SETUP; dev->gadget.speed = USB_SPEED_UNKNOWN; dev->usb_address = 0; } /* * udc_reinit - initialize software state */ static void udc_reinit(struct lh7a40x_udc *dev) { u32 i; DEBUG("%s, %p\n", __func__, dev); /* device/ep0 records init */ INIT_LIST_HEAD(&dev->gadget.ep_list); INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); dev->ep0state = WAIT_FOR_SETUP; /* basic endpoint records init */ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) { struct lh7a40x_ep *ep = &dev->ep[i]; if (i != 0) list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); ep->desc = 0; ep->stopped = 0; INIT_LIST_HEAD(&ep->queue); ep->pio_irqs = 0; } /* the rest was statically initialized, and is read-only */ } #define BYTES2MAXP(x) (x / 8) #define MAXP2BYTES(x) (x * 8) /* until it's enabled, this UDC should be completely invisible * to any USB host. */ static void udc_enable(struct lh7a40x_udc *dev) { int ep; DEBUG("%s, %p\n", __func__, dev); dev->gadget.speed = USB_SPEED_UNKNOWN; #ifdef CONFIG_ARCH_LH7A404 /* Set Port C bit 1 & 2 as output */ set_portc_ddr(1, 1); set_portc_ddr(2, 1); /* Enable USB power */ set_portc_dr(1, 0); #endif /* * C.f Chapter 18.1.3.1 Initializing the USB */ /* Disable the USB */ usb_clear(PM_USB_ENABLE, USB_PM); /* Reset APB & I/O sides of the USB */ usb_set(USB_RESET_APB | USB_RESET_IO, USB_RESET); mdelay(5); usb_clear(USB_RESET_APB | USB_RESET_IO, USB_RESET); /* Set MAXP values for each */ for (ep = 0; ep < UDC_MAX_ENDPOINTS; ep++) { struct lh7a40x_ep *ep_reg = &dev->ep[ep]; u32 csr; usb_set_index(ep); switch (ep_reg->ep_type) { case ep_bulk_in: case ep_interrupt: usb_clear(USB_IN_CSR2_USB_DMA_EN | USB_IN_CSR2_AUTO_SET, ep_reg->csr2); /* Fall through */ case ep_control: usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)), USB_IN_MAXP); break; case ep_bulk_out: usb_clear(USB_OUT_CSR2_USB_DMA_EN | USB_OUT_CSR2_AUTO_CLR, ep_reg->csr2); usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)), USB_OUT_MAXP); break; } /* Read & Write CSR1, just in case */ csr = usb_read(ep_reg->csr1); usb_write(csr, ep_reg->csr1); flush(ep_reg); } /* Disable interrupts */ usb_write(0, USB_IN_INT_EN); usb_write(0, USB_OUT_INT_EN); usb_write(0, USB_INT_EN); /* Enable interrupts */ usb_set(USB_IN_INT_EP0, USB_IN_INT_EN); usb_set(USB_INT_RESET_INT | USB_INT_RESUME_INT, USB_INT_EN); /* Dont enable rest of the interrupts */ /* usb_set(USB_IN_INT_EP3 | USB_IN_INT_EP1 | USB_IN_INT_EP0, USB_IN_INT_EN); usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN); */ /* Enable SUSPEND */ usb_set(PM_ENABLE_SUSPEND, USB_PM); /* Enable the USB */ usb_set(PM_USB_ENABLE, USB_PM); #ifdef CONFIG_ARCH_LH7A404 /* NOTE: DOES NOT WORK! */ /* Let host detect UDC: * Software must write a 0 to the PMR:DCP_CTRL bit to turn this * transistor on and pull the USBDP pin HIGH. */ /* usb_clear(PM_USB_DCP, USB_PM); usb_set(PM_USB_DCP, USB_PM); */ #endif } /* Register entry point for the peripheral controller driver. */ int usb_gadget_register_driver(struct usb_gadget_driver *driver) { struct lh7a40x_udc *dev = the_controller; int retval; DEBUG("%s: %s\n", __func__, driver->driver.name); if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind || !driver->disconnect || !driver->setup) return -EINVAL; if (!dev) return -ENODEV; if (dev->driver) return -EBUSY; /* first hook up the driver ... */ dev->driver = driver; dev->gadget.dev.driver = &driver->driver; device_add(&dev->gadget.dev); retval = driver->bind(&dev->gadget); if (retval) { printk("%s: bind to driver %s --> error %d\n", dev->gadget.name, driver->driver.name, retval); device_del(&dev->gadget.dev); dev->driver = 0; dev->gadget.dev.driver = 0; return retval; } /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. * NOTE: this shouldn't power up until later. */ printk("%s: registered gadget driver '%s'\n", dev->gadget.name, driver->driver.name); udc_enable(dev); return 0; } EXPORT_SYMBOL(usb_gadget_register_driver); /* Unregister entry point for the peripheral controller driver. */ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { struct lh7a40x_udc *dev = the_controller; unsigned long flags; if (!dev) return -ENODEV; if (!driver || driver != dev->driver || !driver->unbind) return -EINVAL; spin_lock_irqsave(&dev->lock, flags); dev->driver = 0; stop_activity(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; device_del(&dev->gadget.dev); udc_disable(dev); DEBUG("unregistered gadget driver '%s'\n", driver->driver.name); return 0; } EXPORT_SYMBOL(usb_gadget_unregister_driver); /*-------------------------------------------------------------------------*/ /** Write request to FIFO (max write == maxp size) * Return: 0 = still running, 1 = completed, negative = errno * NOTE: INDEX register must be set for EP */ static int write_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req) { u32 max; u32 csr; max = le16_to_cpu(ep->desc->wMaxPacketSize); csr = usb_read(ep->csr1); DEBUG("CSR: %x %d\n", csr, csr & USB_IN_CSR1_FIFO_NOT_EMPTY); if (!(csr & USB_IN_CSR1_FIFO_NOT_EMPTY)) { unsigned count; int is_last, is_short; count = write_packet(ep, req, max); usb_set(USB_IN_CSR1_IN_PKT_RDY, ep->csr1); /* last packet is usually short (or a zlp) */ if (unlikely(count != max)) is_last = is_short = 1; else { if (likely(req->req.length != req->req.actual) || req->req.zero) is_last = 0; else is_last = 1; /* interrupt/iso maxpacket may not fill the fifo */ is_short = unlikely(max < ep_maxpacket(ep)); } DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __func__, ep->ep.name, count, is_last ? "/L" : "", is_short ? "/S" : "", req->req.length - req->req.actual, req); /* requests complete when all IN data is in the FIFO */ if (is_last) { done(ep, req, 0); if (list_empty(&ep->queue)) { pio_irq_disable(ep_index(ep)); } return 1; } } else { DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep)); } return 0; } /** Read to request from FIFO (max read == bytes in fifo) * Return: 0 = still running, 1 = completed, negative = errno * NOTE: INDEX register must be set for EP */ static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req) { u32 csr; u8 *buf; unsigned bufferspace, count, is_short; volatile u32 *fifo = (volatile u32 *)ep->fifo; /* make sure there's a packet in the FIFO. */ csr = usb_read(ep->csr1); if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) { DEBUG("%s: Packet NOT ready!\n", __func__); return -EINVAL; } buf = req->req.buf + req->req.actual; prefetchw(buf); bufferspace = req->req.length - req->req.actual; /* read all bytes from this packet */ count = usb_read(USB_OUT_FIFO_WC1); req->req.actual += min(count, bufferspace); is_short = (count < ep->ep.maxpacket); DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n", ep->ep.name, csr, count, is_short ? "/S" : "", req, req->req.actual, req->req.length); while (likely(count-- != 0)) { u8 byte = (u8) (*fifo & 0xff); if (unlikely(bufferspace == 0)) { /* this happens when the driver's buffer * is smaller than what the host sent. * discard the extra data. */ if (req->req.status != -EOVERFLOW) printk("%s overflow %d\n", ep->ep.name, count); req->req.status = -EOVERFLOW; } else { *buf++ = byte; bufferspace--; } } usb_clear(USB_OUT_CSR1_OUT_PKT_RDY, ep->csr1); /* completion */ if (is_short || req->req.actual == req->req.length) { done(ep, req, 0); usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); if (list_empty(&ep->queue)) pio_irq_disable(ep_index(ep)); return 1; } /* finished that packet. the next one may be waiting... */ return 0; } /* * done - retire a request; caller blocked irqs * INDEX register is preserved to keep same */ static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status) { unsigned int stopped = ep->stopped; u32 index; DEBUG("%s, %p\n", __func__, ep); list_del_init(&req->queue); if (likely(req->req.status == -EINPROGRESS)) req->req.status = status; else status = req->req.status; if (status && status != -ESHUTDOWN) DEBUG("complete %s req %p stat %d len %u/%u\n", ep->ep.name, &req->req, status, req->req.actual, req->req.length); /* don't modify queue heads during completion callback */ ep->stopped = 1; /* Read current index (completion may modify it) */ index = usb_read(USB_INDEX); spin_unlock(&ep->dev->lock); req->req.complete(&ep->ep, &req->req); spin_lock(&ep->dev->lock); /* Restore index */ usb_set_index(index); ep->stopped = stopped; } /** Enable EP interrupt */ static void pio_irq_enable(int ep) { DEBUG("%s: %d\n", __func__, ep); switch (ep) { case 1: usb_set(USB_IN_INT_EP1, USB_IN_INT_EN); break; case 2: usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN); break; case 3: usb_set(USB_IN_INT_EP3, USB_IN_INT_EN); break; default: DEBUG("Unknown endpoint: %d\n", ep); break; } } /** Disable EP interrupt */ static void pio_irq_disable(int ep) { DEBUG("%s: %d\n", __func__, ep); switch (ep) { case 1: usb_clear(USB_IN_INT_EP1, USB_IN_INT_EN); break; case 2: usb_clear(USB_OUT_INT_EP2, USB_OUT_INT_EN); break; case 3: usb_clear(USB_IN_INT_EP3, USB_IN_INT_EN); break; default: DEBUG("Unknown endpoint: %d\n", ep); break; } } /* * nuke - dequeue ALL requests */ void nuke(struct lh7a40x_ep *ep, int status) { struct lh7a40x_request *req; DEBUG("%s, %p\n", __func__, ep); /* Flush FIFO */ flush(ep); /* called with irqs blocked */ while (!list_empty(&ep->queue)) { req = list_entry(ep->queue.next, struct lh7a40x_request, queue); done(ep, req, status); } /* Disable IRQ if EP is enabled (has descriptor) */ if (ep->desc) pio_irq_disable(ep_index(ep)); } /* void nuke_all(struct lh7a40x_udc *dev) { int n; for(n=0; nep[n]; usb_set_index(n); nuke(ep, 0); } }*/ /* static void flush_all(struct lh7a40x_udc *dev) { int n; for (n = 0; n < UDC_MAX_ENDPOINTS; n++) { struct lh7a40x_ep *ep = &dev->ep[n]; flush(ep); } } */ /** Flush EP * NOTE: INDEX register must be set before this call */ static void flush(struct lh7a40x_ep *ep) { DEBUG("%s, %p\n", __func__, ep); switch (ep->ep_type) { case ep_control: /* check, by implication c.f. 15.1.2.11 */ break; case ep_bulk_in: case ep_interrupt: /* if(csr & USB_IN_CSR1_IN_PKT_RDY) */ usb_set(USB_IN_CSR1_FIFO_FLUSH, ep->csr1); break; case ep_bulk_out: /* if(csr & USB_OUT_CSR1_OUT_PKT_RDY) */ usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); break; } } /** * lh7a40x_in_epn - handle IN interrupt */ static void lh7a40x_in_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) { u32 csr; struct lh7a40x_ep *ep = &dev->ep[ep_idx]; struct lh7a40x_request *req; usb_set_index(ep_idx); csr = usb_read(ep->csr1); DEBUG("%s: %d, csr %x\n", __func__, ep_idx, csr); if (csr & USB_IN_CSR1_SENT_STALL) { DEBUG("USB_IN_CSR1_SENT_STALL\n"); usb_set(USB_IN_CSR1_SENT_STALL /*|USB_IN_CSR1_SEND_STALL */ , ep->csr1); return; } if (!ep->desc) { DEBUG("%s: NO EP DESC\n", __func__); return; } if (list_empty(&ep->queue)) req = 0; else req = list_entry(ep->queue.next, struct lh7a40x_request, queue); DEBUG("req: %p\n", req); if (!req) return; write_fifo(ep, req); } /* ********************************************************************************************* */ /* Bulk OUT (recv) */ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) { struct lh7a40x_ep *ep = &dev->ep[ep_idx]; struct lh7a40x_request *req; DEBUG("%s: %d\n", __func__, ep_idx); usb_set_index(ep_idx); if (ep->desc) { u32 csr; csr = usb_read(ep->csr1); while ((csr = usb_read(ep-> csr1)) & (USB_OUT_CSR1_OUT_PKT_RDY | USB_OUT_CSR1_SENT_STALL)) { DEBUG("%s: %x\n", __func__, csr); if (csr & USB_OUT_CSR1_SENT_STALL) { DEBUG("%s: stall sent, flush fifo\n", __func__); /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */ flush(ep); } else if (csr & USB_OUT_CSR1_OUT_PKT_RDY) { if (list_empty(&ep->queue)) req = 0; else req = list_entry(ep->queue.next, struct lh7a40x_request, queue); if (!req) { printk("%s: NULL REQ %d\n", __func__, ep_idx); flush(ep); break; } else { read_fifo(ep, req); } } } } else { /* Throw packet away.. */ printk("%s: No descriptor?!?\n", __func__); flush(ep); } } static void stop_activity(struct lh7a40x_udc *dev, struct usb_gadget_driver *driver) { int i; /* don't disconnect drivers more than once */ if (dev->gadget.speed == USB_SPEED_UNKNOWN) driver = 0; dev->gadget.speed = USB_SPEED_UNKNOWN; /* prevent new request submissions, kill any outstanding requests */ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) { struct lh7a40x_ep *ep = &dev->ep[i]; ep->stopped = 1; usb_set_index(i); nuke(ep, -ESHUTDOWN); } /* report disconnect; the driver is already quiesced */ if (driver) { spin_unlock(&dev->lock); driver->disconnect(&dev->gadget); spin_lock(&dev->lock); } /* re-init driver-visible data structures */ udc_reinit(dev); } /** Handle USB RESET interrupt */ static void lh7a40x_reset_intr(struct lh7a40x_udc *dev) { #if 0 /* def CONFIG_ARCH_LH7A404 */ /* Does not work always... */ DEBUG("%s: %d\n", __func__, dev->usb_address); if (!dev->usb_address) { /*usb_set(USB_RESET_IO, USB_RESET); mdelay(5); usb_clear(USB_RESET_IO, USB_RESET); */ return; } /* Put the USB controller into reset. */ usb_set(USB_RESET_IO, USB_RESET); /* Set Device ID to 0 */ udc_set_address(dev, 0); /* Let PLL2 settle down */ mdelay(5); /* Release the USB controller from reset */ usb_clear(USB_RESET_IO, USB_RESET); /* Re-enable UDC */ udc_enable(dev); #endif dev->gadget.speed = USB_SPEED_FULL; } /* * lh7a40x usb client interrupt handler. */ static irqreturn_t lh7a40x_udc_irq(int irq, void *_dev) { struct lh7a40x_udc *dev = _dev; DEBUG("\n\n"); spin_lock(&dev->lock); for (;;) { u32 intr_in = usb_read(USB_IN_INT); u32 intr_out = usb_read(USB_OUT_INT); u32 intr_int = usb_read(USB_INT); /* Test also against enable bits.. (lh7a40x errata).. Sigh.. */ u32 in_en = usb_read(USB_IN_INT_EN); u32 out_en = usb_read(USB_OUT_INT_EN); if (!intr_out && !intr_in && !intr_int) break; DEBUG("%s (on state %s)\n", __func__, state_names[dev->ep0state]); DEBUG("intr_out = %x\n", intr_out); DEBUG("intr_in = %x\n", intr_in); DEBUG("intr_int = %x\n", intr_int); if (intr_in) { usb_write(intr_in, USB_IN_INT); if ((intr_in & USB_IN_INT_EP1) && (in_en & USB_IN_INT_EP1)) { DEBUG("USB_IN_INT_EP1\n"); lh7a40x_in_epn(dev, 1, intr_in); } if ((intr_in & USB_IN_INT_EP3) && (in_en & USB_IN_INT_EP3)) { DEBUG("USB_IN_INT_EP3\n"); lh7a40x_in_epn(dev, 3, intr_in); } if (intr_in & USB_IN_INT_EP0) { DEBUG("USB_IN_INT_EP0 (control)\n"); lh7a40x_handle_ep0(dev, intr_in); } } if (intr_out) { usb_write(intr_out, USB_OUT_INT); if ((intr_out & USB_OUT_INT_EP2) && (out_en & USB_OUT_INT_EP2)) { DEBUG("USB_OUT_INT_EP2\n"); lh7a40x_out_epn(dev, 2, intr_out); } } if (intr_int) { usb_write(intr_int, USB_INT); if (intr_int & USB_INT_RESET_INT) { lh7a40x_reset_intr(dev); } if (intr_int & USB_INT_RESUME_INT) { DEBUG("USB resume\n"); if (dev->gadget.speed != USB_SPEED_UNKNOWN && dev->driver && dev->driver->resume && is_usb_connected()) { dev->driver->resume(&dev->gadget); } } if (intr_int & USB_INT_SUSPEND_INT) { DEBUG("USB suspend%s\n", is_usb_connected()? "" : "+disconnect"); if (!is_usb_connected()) { stop_activity(dev, dev->driver); } else if (dev->gadget.speed != USB_SPEED_UNKNOWN && dev->driver && dev->driver->suspend) { dev->driver->suspend(&dev->gadget); } } } } spin_unlock(&dev->lock); return IRQ_HANDLED; } static int lh7a40x_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct lh7a40x_ep *ep; struct lh7a40x_udc *dev; unsigned long flags; DEBUG("%s, %p\n", __func__, _ep); ep = container_of(_ep, struct lh7a40x_ep, ep); if (!_ep || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) { DEBUG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } /* xfer types must match, except that interrupt ~= bulk */ if (ep->bmAttributes != desc->bmAttributes && ep->bmAttributes != USB_ENDPOINT_XFER_BULK && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { DEBUG("%s, %s type mismatch\n", __func__, _ep->name); return -EINVAL; } /* hardware _could_ do smaller, but driver doesn't */ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep)) || !desc->wMaxPacketSize) { DEBUG("%s, bad %s maxpacket\n", __func__, _ep->name); return -ERANGE; } dev = ep->dev; if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { DEBUG("%s, bogus device state\n", __func__); return -ESHUTDOWN; } spin_lock_irqsave(&ep->dev->lock, flags); ep->stopped = 0; ep->desc = desc; ep->pio_irqs = 0; ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); spin_unlock_irqrestore(&ep->dev->lock, flags); /* Reset halt state (does flush) */ lh7a40x_set_halt(_ep, 0); DEBUG("%s: enabled %s\n", __func__, _ep->name); return 0; } /** Disable EP * NOTE: Sets INDEX register */ static int lh7a40x_ep_disable(struct usb_ep *_ep) { struct lh7a40x_ep *ep; unsigned long flags; DEBUG("%s, %p\n", __func__, _ep); ep = container_of(_ep, struct lh7a40x_ep, ep); if (!_ep || !ep->desc) { DEBUG("%s, %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); return -EINVAL; } spin_lock_irqsave(&ep->dev->lock, flags); usb_set_index(ep_index(ep)); /* Nuke all pending requests (does flush) */ nuke(ep, -ESHUTDOWN); /* Disable ep IRQ */ pio_irq_disable(ep_index(ep)); ep->desc = 0; ep->stopped = 1; spin_unlock_irqrestore(&ep->dev->lock, flags); DEBUG("%s: disabled %s\n", __func__, _ep->name); return 0; } static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) { struct lh7a40x_request *req; DEBUG("%s, %p\n", __func__, ep); req = kzalloc(sizeof(*req), gfp_flags); if (!req) return 0; INIT_LIST_HEAD(&req->queue); return &req->req; } static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req) { struct lh7a40x_request *req; DEBUG("%s, %p\n", __func__, ep); req = container_of(_req, struct lh7a40x_request, req); WARN_ON(!list_empty(&req->queue)); kfree(req); } /** Queue one request * Kickstart transfer if needed * NOTE: Sets INDEX register */ static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct lh7a40x_request *req; struct lh7a40x_ep *ep; struct lh7a40x_udc *dev; unsigned long flags; DEBUG("\n\n\n%s, %p\n", __func__, _ep); req = container_of(_req, struct lh7a40x_request, req); if (unlikely (!_req || !_req->complete || !_req->buf || !list_empty(&req->queue))) { DEBUG("%s, bad params\n", __func__); return -EINVAL; } ep = container_of(_ep, struct lh7a40x_ep, ep); if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { DEBUG("%s, bad ep\n", __func__); return -EINVAL; } dev = ep->dev; if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { DEBUG("%s, bogus device state %p\n", __func__, dev->driver); return -ESHUTDOWN; } DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length, _req->buf); spin_lock_irqsave(&dev->lock, flags); _req->status = -EINPROGRESS; _req->actual = 0; /* kickstart this i/o queue? */ DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue), ep->stopped); if (list_empty(&ep->queue) && likely(!ep->stopped)) { u32 csr; if (unlikely(ep_index(ep) == 0)) { /* EP0 */ list_add_tail(&req->queue, &ep->queue); lh7a40x_ep0_kick(dev, ep); req = 0; } else if (ep_is_in(ep)) { /* EP1 & EP3 */ usb_set_index(ep_index(ep)); csr = usb_read(ep->csr1); pio_irq_enable(ep_index(ep)); if ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY) == 0) { if (write_fifo(ep, req) == 1) req = 0; } } else { /* EP2 */ usb_set_index(ep_index(ep)); csr = usb_read(ep->csr1); pio_irq_enable(ep_index(ep)); if (!(csr & USB_OUT_CSR1_FIFO_FULL)) { if (read_fifo(ep, req) == 1) req = 0; } } } /* pio or dma irq handler advances the queue. */ if (likely(req != 0)) list_add_tail(&req->queue, &ep->queue); spin_unlock_irqrestore(&dev->lock, flags); return 0; } /* dequeue JUST ONE request */ static int lh7a40x_dequeue(struct usb_ep *_ep, struct usb_request *_req) { struct lh7a40x_ep *ep; struct lh7a40x_request *req; unsigned long flags; DEBUG("%s, %p\n", __func__, _ep); ep = container_of(_ep, struct lh7a40x_ep, ep); if (!_ep || ep->ep.name == ep0name) return -EINVAL; spin_lock_irqsave(&ep->dev->lock, flags); /* make sure it's actually queued on this endpoint */ list_for_each_entry(req, &ep->queue, queue) { if (&req->req == _req) break; } if (&req->req != _req) { spin_unlock_irqrestore(&ep->dev->lock, flags); return -EINVAL; } done(ep, req, -ECONNRESET); spin_unlock_irqrestore(&ep->dev->lock, flags); return 0; } /** Halt specific EP * Return 0 if success * NOTE: Sets INDEX register to EP ! */ static int lh7a40x_set_halt(struct usb_ep *_ep, int value) { struct lh7a40x_ep *ep; unsigned long flags; ep = container_of(_ep, struct lh7a40x_ep, ep); if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { DEBUG("%s, bad ep\n", __func__); return -EINVAL; } usb_set_index(ep_index(ep)); DEBUG("%s, ep %d, val %d\n", __func__, ep_index(ep), value); spin_lock_irqsave(&ep->dev->lock, flags); if (ep_index(ep) == 0) { /* EP0 */ usb_set(EP0_SEND_STALL, ep->csr1); } else if (ep_is_in(ep)) { u32 csr = usb_read(ep->csr1); if (value && ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY) || !list_empty(&ep->queue))) { /* * Attempts to halt IN endpoints will fail (returning -EAGAIN) * if any transfer requests are still queued, or if the controller * FIFO still holds bytes that the host hasn't collected. */ spin_unlock_irqrestore(&ep->dev->lock, flags); DEBUG ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n", (csr & USB_IN_CSR1_FIFO_NOT_EMPTY), !list_empty(&ep->queue)); return -EAGAIN; } flush(ep); if (value) usb_set(USB_IN_CSR1_SEND_STALL, ep->csr1); else { usb_clear(USB_IN_CSR1_SEND_STALL, ep->csr1); usb_set(USB_IN_CSR1_CLR_DATA_TOGGLE, ep->csr1); } } else { flush(ep); if (value) usb_set(USB_OUT_CSR1_SEND_STALL, ep->csr1); else { usb_clear(USB_OUT_CSR1_SEND_STALL, ep->csr1); usb_set(USB_OUT_CSR1_CLR_DATA_REG, ep->csr1); } } if (value) { ep->stopped = 1; } else { ep->stopped = 0; } spin_unlock_irqrestore(&ep->dev->lock, flags); DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS"); return 0; } /** Return bytes in EP FIFO * NOTE: Sets INDEX register to EP */ static int lh7a40x_fifo_status(struct usb_ep *_ep) { u32 csr; int count = 0; struct lh7a40x_ep *ep; ep = container_of(_ep, struct lh7a40x_ep, ep); if (!_ep) { DEBUG("%s, bad ep\n", __func__); return -ENODEV; } DEBUG("%s, %d\n", __func__, ep_index(ep)); /* LPD can't report unclaimed bytes from IN fifos */ if (ep_is_in(ep)) return -EOPNOTSUPP; usb_set_index(ep_index(ep)); csr = usb_read(ep->csr1); if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN || csr & USB_OUT_CSR1_OUT_PKT_RDY) { count = usb_read(USB_OUT_FIFO_WC1); } return count; } /** Flush EP FIFO * NOTE: Sets INDEX register to EP */ static void lh7a40x_fifo_flush(struct usb_ep *_ep) { struct lh7a40x_ep *ep; ep = container_of(_ep, struct lh7a40x_ep, ep); if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { DEBUG("%s, bad ep\n", __func__); return; } usb_set_index(ep_index(ep)); flush(ep); } /****************************************************************/ /* End Point 0 related functions */ /****************************************************************/ /* return: 0 = still running, 1 = completed, negative = errno */ static int write_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req) { u32 max; unsigned count; int is_last; max = ep_maxpacket(ep); DEBUG_EP0("%s\n", __func__); count = write_packet(ep, req, max); /* last packet is usually short (or a zlp) */ if (unlikely(count != max)) is_last = 1; else { if (likely(req->req.length != req->req.actual) || req->req.zero) is_last = 0; else is_last = 1; } DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__, ep->ep.name, count, is_last ? "/L" : "", req->req.length - req->req.actual, req); /* requests complete when all IN data is in the FIFO */ if (is_last) { done(ep, req, 0); return 1; } return 0; } static __inline__ int lh7a40x_fifo_read(struct lh7a40x_ep *ep, unsigned char *cp, int max) { int bytes; int count = usb_read(USB_OUT_FIFO_WC1); volatile u32 *fifo = (volatile u32 *)ep->fifo; if (count > max) count = max; bytes = count; while (count--) *cp++ = *fifo & 0xFF; return bytes; } static __inline__ void lh7a40x_fifo_write(struct lh7a40x_ep *ep, unsigned char *cp, int count) { volatile u32 *fifo = (volatile u32 *)ep->fifo; DEBUG_EP0("fifo_write: %d %d\n", ep_index(ep), count); while (count--) *fifo = *cp++; } static int read_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req) { u32 csr; u8 *buf; unsigned bufferspace, count, is_short; volatile u32 *fifo = (volatile u32 *)ep->fifo; DEBUG_EP0("%s\n", __func__); csr = usb_read(USB_EP0_CSR); if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) return 0; buf = req->req.buf + req->req.actual; prefetchw(buf); bufferspace = req->req.length - req->req.actual; /* read all bytes from this packet */ if (likely(csr & EP0_OUT_PKT_RDY)) { count = usb_read(USB_OUT_FIFO_WC1); req->req.actual += min(count, bufferspace); } else /* zlp */ count = 0; is_short = (count < ep->ep.maxpacket); DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n", ep->ep.name, csr, count, is_short ? "/S" : "", req, req->req.actual, req->req.length); while (likely(count-- != 0)) { u8 byte = (u8) (*fifo & 0xff); if (unlikely(bufferspace == 0)) { /* this happens when the driver's buffer * is smaller than what the host sent. * discard the extra data. */ if (req->req.status != -EOVERFLOW) DEBUG_EP0("%s overflow %d\n", ep->ep.name, count); req->req.status = -EOVERFLOW; } else { *buf++ = byte; bufferspace--; } } /* completion */ if (is_short || req->req.actual == req->req.length) { done(ep, req, 0); return 1; } /* finished that packet. the next one may be waiting... */ return 0; } /** * udc_set_address - set the USB address for this device * @address: * * Called from control endpoint function after it decodes a set address setup packet. */ static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address) { DEBUG_EP0("%s: %d\n", __func__, address); /* c.f. 15.1.2.2 Table 15-4 address will be used after DATA_END is set */ dev->usb_address = address; usb_set((address & USB_FA_FUNCTION_ADDR), USB_FA); usb_set(USB_FA_ADDR_UPDATE | (address & USB_FA_FUNCTION_ADDR), USB_FA); /* usb_read(USB_FA); */ } /* * DATA_STATE_RECV (OUT_PKT_RDY) * - if error * set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits * - else * set EP0_CLR_OUT bit if last set EP0_DATA_END bit */ static void lh7a40x_ep0_out(struct lh7a40x_udc *dev, u32 csr) { struct lh7a40x_request *req; struct lh7a40x_ep *ep = &dev->ep[0]; int ret; DEBUG_EP0("%s: %x\n", __func__, csr); if (list_empty(&ep->queue)) req = 0; else req = list_entry(ep->queue.next, struct lh7a40x_request, queue); if (req) { if (req->req.length == 0) { DEBUG_EP0("ZERO LENGTH OUT!\n"); usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR); dev->ep0state = WAIT_FOR_SETUP; return; } ret = read_fifo_ep0(ep, req); if (ret) { /* Done! */ DEBUG_EP0("%s: finished, waiting for status\n", __func__); usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR); dev->ep0state = WAIT_FOR_SETUP; } else { /* Not done yet.. */ DEBUG_EP0("%s: not finished\n", __func__); usb_set(EP0_CLR_OUT, USB_EP0_CSR); } } else { DEBUG_EP0("NO REQ??!\n"); } } /* * DATA_STATE_XMIT */ static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr) { struct lh7a40x_request *req; struct lh7a40x_ep *ep = &dev->ep[0]; int ret, need_zlp = 0; DEBUG_EP0("%s: %x\n", __func__, csr); if (list_empty(&ep->queue)) req = 0; else req = list_entry(ep->queue.next, struct lh7a40x_request, queue); if (!req) { DEBUG_EP0("%s: NULL REQ\n", __func__); return 0; } if (req->req.length == 0) { usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); dev->ep0state = WAIT_FOR_SETUP; return 1; } if (req->req.length - req->req.actual == EP0_PACKETSIZE) { /* Next write will end with the packet size, */ /* so we need Zero-length-packet */ need_zlp = 1; } ret = write_fifo_ep0(ep, req); if (ret == 1 && !need_zlp) { /* Last packet */ DEBUG_EP0("%s: finished, waiting for status\n", __func__); usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); dev->ep0state = WAIT_FOR_SETUP; } else { DEBUG_EP0("%s: not finished\n", __func__); usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR); } if (need_zlp) { DEBUG_EP0("%s: Need ZLP!\n", __func__); usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR); dev->ep0state = DATA_STATE_NEED_ZLP; } return 1; } static int lh7a40x_handle_get_status(struct lh7a40x_udc *dev, struct usb_ctrlrequest *ctrl) { struct lh7a40x_ep *ep0 = &dev->ep[0]; struct lh7a40x_ep *qep; int reqtype = (ctrl->bRequestType & USB_RECIP_MASK); u16 val = 0; if (reqtype == USB_RECIP_INTERFACE) { /* This is not supported. * And according to the USB spec, this one does nothing.. * Just return 0 */ DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n"); } else if (reqtype == USB_RECIP_DEVICE) { DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n"); val |= (1 << 0); /* Self powered */ /*val |= (1<<1); *//* Remote wakeup */ } else if (reqtype == USB_RECIP_ENDPOINT) { int ep_num = (ctrl->wIndex & ~USB_DIR_IN); DEBUG_SETUP ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n", ep_num, ctrl->wLength); if (ctrl->wLength > 2 || ep_num > 3) return -EOPNOTSUPP; qep = &dev->ep[ep_num]; if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0) && ep_index(qep) != 0) { return -EOPNOTSUPP; } usb_set_index(ep_index(qep)); /* Return status on next IN token */ switch (qep->ep_type) { case ep_control: val = (usb_read(qep->csr1) & EP0_SEND_STALL) == EP0_SEND_STALL; break; case ep_bulk_in: case ep_interrupt: val = (usb_read(qep->csr1) & USB_IN_CSR1_SEND_STALL) == USB_IN_CSR1_SEND_STALL; break; case ep_bulk_out: val = (usb_read(qep->csr1) & USB_OUT_CSR1_SEND_STALL) == USB_OUT_CSR1_SEND_STALL; break; } /* Back to EP0 index */ usb_set_index(0); DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num, ctrl->wIndex, val); } else { DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype); return -EOPNOTSUPP; } /* Clear "out packet ready" */ usb_set((EP0_CLR_OUT), USB_EP0_CSR); /* Put status to FIFO */ lh7a40x_fifo_write(ep0, (u8 *) & val, sizeof(val)); /* Issue "In packet ready" */ usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); return 0; } /* * WAIT_FOR_SETUP (OUT_PKT_RDY) * - read data packet from EP0 FIFO * - decode command * - if error * set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits * - else * set EP0_CLR_OUT | EP0_DATA_END bits */ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr) { struct lh7a40x_ep *ep = &dev->ep[0]; struct usb_ctrlrequest ctrl; int i, bytes, is_in; DEBUG_SETUP("%s: %x\n", __func__, csr); /* Nuke all previous transfers */ nuke(ep, -EPROTO); /* read control req from fifo (8 bytes) */ bytes = lh7a40x_fifo_read(ep, (unsigned char *)&ctrl, 8); DEBUG_SETUP("Read CTRL REQ %d bytes\n", bytes); DEBUG_SETUP("CTRL.bRequestType = %d (is_in %d)\n", ctrl.bRequestType, ctrl.bRequestType == USB_DIR_IN); DEBUG_SETUP("CTRL.bRequest = %d\n", ctrl.bRequest); DEBUG_SETUP("CTRL.wLength = %d\n", ctrl.wLength); DEBUG_SETUP("CTRL.wValue = %d (%d)\n", ctrl.wValue, ctrl.wValue >> 8); DEBUG_SETUP("CTRL.wIndex = %d\n", ctrl.wIndex); /* Set direction of EP0 */ if (likely(ctrl.bRequestType & USB_DIR_IN)) { ep->bEndpointAddress |= USB_DIR_IN; is_in = 1; } else { ep->bEndpointAddress &= ~USB_DIR_IN; is_in = 0; } dev->req_pending = 1; /* Handle some SETUP packets ourselves */ switch (ctrl.bRequest) { case USB_REQ_SET_ADDRESS: if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) break; DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue); udc_set_address(dev, ctrl.wValue); usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR); return; case USB_REQ_GET_STATUS:{ if (lh7a40x_handle_get_status(dev, &ctrl) == 0) return; case USB_REQ_CLEAR_FEATURE: case USB_REQ_SET_FEATURE: if (ctrl.bRequestType == USB_RECIP_ENDPOINT) { struct lh7a40x_ep *qep; int ep_num = (ctrl.wIndex & 0x0f); /* Support only HALT feature */ if (ctrl.wValue != 0 || ctrl.wLength != 0 || ep_num > 3 || ep_num < 1) break; qep = &dev->ep[ep_num]; spin_unlock(&dev->lock); if (ctrl.bRequest == USB_REQ_SET_FEATURE) { DEBUG_SETUP("SET_FEATURE (%d)\n", ep_num); lh7a40x_set_halt(&qep->ep, 1); } else { DEBUG_SETUP("CLR_FEATURE (%d)\n", ep_num); lh7a40x_set_halt(&qep->ep, 0); } spin_lock(&dev->lock); usb_set_index(0); /* Reply with a ZLP on next IN token */ usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR); return; } break; } default: break; } if (likely(dev->driver)) { /* device-2-host (IN) or no data setup command, process immediately */ spin_unlock(&dev->lock); i = dev->driver->setup(&dev->gadget, &ctrl); spin_lock(&dev->lock); if (i < 0) { /* setup processing failed, force stall */ DEBUG_SETUP (" --> ERROR: gadget setup FAILED (stalling), setup returned %d\n", i); usb_set_index(0); usb_set((EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL), USB_EP0_CSR); /* ep->stopped = 1; */ dev->ep0state = WAIT_FOR_SETUP; } } } /* * DATA_STATE_NEED_ZLP */ static void lh7a40x_ep0_in_zlp(struct lh7a40x_udc *dev, u32 csr) { DEBUG_EP0("%s: %x\n", __func__, csr); /* c.f. Table 15-14 */ usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR); dev->ep0state = WAIT_FOR_SETUP; } /* * handle ep0 interrupt */ static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr) { struct lh7a40x_ep *ep = &dev->ep[0]; u32 csr; /* Set index 0 */ usb_set_index(0); csr = usb_read(USB_EP0_CSR); DEBUG_EP0("%s: csr = %x\n", __func__, csr); /* * For overview of what we should be doing see c.f. Chapter 18.1.2.4 * We will follow that outline here modified by our own global state * indication which provides hints as to what we think should be * happening.. */ /* * if SENT_STALL is set * - clear the SENT_STALL bit */ if (csr & EP0_SENT_STALL) { DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __func__, csr); usb_clear((EP0_SENT_STALL | EP0_SEND_STALL), USB_EP0_CSR); nuke(ep, -ECONNABORTED); dev->ep0state = WAIT_FOR_SETUP; return; } /* * if a transfer is in progress && IN_PKT_RDY and OUT_PKT_RDY are clear * - fill EP0 FIFO * - if last packet * - set IN_PKT_RDY | DATA_END * - else * set IN_PKT_RDY */ if (!(csr & (EP0_IN_PKT_RDY | EP0_OUT_PKT_RDY))) { DEBUG_EP0("%s: IN_PKT_RDY and OUT_PKT_RDY are clear\n", __func__); switch (dev->ep0state) { case DATA_STATE_XMIT: DEBUG_EP0("continue with DATA_STATE_XMIT\n"); lh7a40x_ep0_in(dev, csr); return; case DATA_STATE_NEED_ZLP: DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n"); lh7a40x_ep0_in_zlp(dev, csr); return; default: /* Stall? */ DEBUG_EP0("Odd state!! state = %s\n", state_names[dev->ep0state]); dev->ep0state = WAIT_FOR_SETUP; /* nuke(ep, 0); */ /* usb_set(EP0_SEND_STALL, ep->csr1); */ break; } } /* * if SETUP_END is set * - abort the last transfer * - set SERVICED_SETUP_END_BIT */ if (csr & EP0_SETUP_END) { DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __func__, csr); usb_set(EP0_CLR_SETUP_END, USB_EP0_CSR); nuke(ep, 0); dev->ep0state = WAIT_FOR_SETUP; } /* * if EP0_OUT_PKT_RDY is set * - read data packet from EP0 FIFO * - decode command * - if error * set SERVICED_OUT_PKT_RDY | DATA_END bits | SEND_STALL * - else * set SERVICED_OUT_PKT_RDY | DATA_END bits */ if (csr & EP0_OUT_PKT_RDY) { DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __func__, csr); switch (dev->ep0state) { case WAIT_FOR_SETUP: DEBUG_EP0("WAIT_FOR_SETUP\n"); lh7a40x_ep0_setup(dev, csr); break; case DATA_STATE_RECV: DEBUG_EP0("DATA_STATE_RECV\n"); lh7a40x_ep0_out(dev, csr); break; default: /* send stall? */ DEBUG_EP0("strange state!! 2. send stall? state = %d\n", dev->ep0state); break; } } } static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep) { u32 csr; usb_set_index(0); csr = usb_read(USB_EP0_CSR); DEBUG_EP0("%s: %x\n", __func__, csr); /* Clear "out packet ready" */ usb_set(EP0_CLR_OUT, USB_EP0_CSR); if (ep_is_in(ep)) { dev->ep0state = DATA_STATE_XMIT; lh7a40x_ep0_in(dev, csr); } else { dev->ep0state = DATA_STATE_RECV; lh7a40x_ep0_out(dev, csr); } } /* --------------------------------------------------------------------------- * device-scoped parts of the api to the usb controller hardware * --------------------------------------------------------------------------- */ static int lh7a40x_udc_get_frame(struct usb_gadget *_gadget) { u32 frame1 = usb_read(USB_FRM_NUM1); /* Least significant 8 bits */ u32 frame2 = usb_read(USB_FRM_NUM2); /* Most significant 3 bits */ DEBUG("%s, %p\n", __func__, _gadget); return ((frame2 & 0x07) << 8) | (frame1 & 0xff); } static int lh7a40x_udc_wakeup(struct usb_gadget *_gadget) { /* host may not have enabled remote wakeup */ /*if ((UDCCS0 & UDCCS0_DRWF) == 0) return -EHOSTUNREACH; udc_set_mask_UDCCR(UDCCR_RSM); */ return -ENOTSUPP; } static const struct usb_gadget_ops lh7a40x_udc_ops = { .get_frame = lh7a40x_udc_get_frame, .wakeup = lh7a40x_udc_wakeup, /* current versions must always be self-powered */ }; static void nop_release(struct device *dev) { DEBUG("%s %s\n", __func__, dev_name(dev)); } static struct lh7a40x_udc memory = { .usb_address = 0, .gadget = { .ops = &lh7a40x_udc_ops, .ep0 = &memory.ep[0].ep, .name = driver_name, .dev = { .bus_id = "gadget", .release = nop_release, }, }, /* control endpoint */ .ep[0] = { .ep = { .name = ep0name, .ops = &lh7a40x_ep_ops, .maxpacket = EP0_PACKETSIZE, }, .dev = &memory, .bEndpointAddress = 0, .bmAttributes = 0, .ep_type = ep_control, .fifo = io_p2v(USB_EP0_FIFO), .csr1 = USB_EP0_CSR, .csr2 = USB_EP0_CSR, }, /* first group of endpoints */ .ep[1] = { .ep = { .name = "ep1in-bulk", .ops = &lh7a40x_ep_ops, .maxpacket = 64, }, .dev = &memory, .bEndpointAddress = USB_DIR_IN | 1, .bmAttributes = USB_ENDPOINT_XFER_BULK, .ep_type = ep_bulk_in, .fifo = io_p2v(USB_EP1_FIFO), .csr1 = USB_IN_CSR1, .csr2 = USB_IN_CSR2, }, .ep[2] = { .ep = { .name = "ep2out-bulk", .ops = &lh7a40x_ep_ops, .maxpacket = 64, }, .dev = &memory, .bEndpointAddress = 2, .bmAttributes = USB_ENDPOINT_XFER_BULK, .ep_type = ep_bulk_out, .fifo = io_p2v(USB_EP2_FIFO), .csr1 = USB_OUT_CSR1, .csr2 = USB_OUT_CSR2, }, .ep[3] = { .ep = { .name = "ep3in-int", .ops = &lh7a40x_ep_ops, .maxpacket = 64, }, .dev = &memory, .bEndpointAddress = USB_DIR_IN | 3, .bmAttributes = USB_ENDPOINT_XFER_INT, .ep_type = ep_interrupt, .fifo = io_p2v(USB_EP3_FIFO), .csr1 = USB_IN_CSR1, .csr2 = USB_IN_CSR2, }, }; /* * probe - binds to the platform device */ static int lh7a40x_udc_probe(struct platform_device *pdev) { struct lh7a40x_udc *dev = &memory; int retval; DEBUG("%s: %p\n", __func__, pdev); spin_lock_init(&dev->lock); dev->dev = &pdev->dev; device_initialize(&dev->gadget.dev); dev->gadget.dev.parent = &pdev->dev; the_controller = dev; platform_set_drvdata(pdev, dev); udc_disable(dev); udc_reinit(dev); /* irq setup after old hardware state is cleaned up */ retval = request_irq(IRQ_USBINTR, lh7a40x_udc_irq, IRQF_DISABLED, driver_name, dev); if (retval != 0) { DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name, IRQ_USBINTR, retval); return -EBUSY; } create_proc_files(); return retval; } static int lh7a40x_udc_remove(struct platform_device *pdev) { struct lh7a40x_udc *dev = platform_get_drvdata(pdev); DEBUG("%s: %p\n", __func__, pdev); if (dev->driver) return -EBUSY; udc_disable(dev); remove_proc_files(); free_irq(IRQ_USBINTR, dev); platform_set_drvdata(pdev, 0); the_controller = 0; return 0; } /*-------------------------------------------------------------------------*/ static struct platform_driver udc_driver = { .probe = lh7a40x_udc_probe, .remove = lh7a40x_udc_remove, /* FIXME power management support */ /* .suspend = ... disable UDC */ /* .resume = ... re-enable UDC */ .driver = { .name = (char *)driver_name, .owner = THIS_MODULE, }, }; static int __init udc_init(void) { DEBUG("%s: %s version %s\n", __func__, driver_name, DRIVER_VERSION); return platform_driver_register(&udc_driver); } static void __exit udc_exit(void) { platform_driver_unregister(&udc_driver); } module_init(udc_init); module_exit(udc_exit); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:lh7a40x_udc");