/* * Universal Host Controller Interface driver for USB. * * Maintainer: Alan Stern * * (C) Copyright 1999 Linus Torvalds * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com * (C) Copyright 1999 Randy Dunlap * (C) Copyright 1999 Georg Acher, acher@in.tum.de * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu * * Intel documents this fairly well, and as far as I know there * are no royalties or anything like that, but even so there are * people who decided that they want to do the same thing in a * completely different way. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../core/hcd.h" #include "uhci-hcd.h" #include "pci-quirks.h" /* * Version Information */ #define DRIVER_VERSION "v3.0" #define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \ Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \ Alan Stern" #define DRIVER_DESC "USB Universal Host Controller Interface driver" /* for flakey hardware, ignore overcurrent indicators */ static int ignore_oc; module_param(ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications"); /* * debug = 0, no debugging messages * debug = 1, dump failed URBs except for stalls * debug = 2, dump all failed URBs (including stalls) * show all queues in /debug/uhci/[pci_addr] * debug = 3, show all TDs in URBs when dumping */ #ifdef DEBUG #define DEBUG_CONFIGURED 1 static int debug = 1; module_param(debug, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug level"); #else #define DEBUG_CONFIGURED 0 #define debug 0 #endif static char *errbuf; #define ERRBUF_LEN (32 * 1024) static struct kmem_cache *uhci_up_cachep; /* urb_priv */ static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state); static void wakeup_rh(struct uhci_hcd *uhci); static void uhci_get_current_frame_number(struct uhci_hcd *uhci); #include "uhci-debug.c" #include "uhci-q.c" #include "uhci-hub.c" /* * Finish up a host controller reset and update the recorded state. */ static void finish_reset(struct uhci_hcd *uhci) { int port; /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect * bits in the port status and control registers. * We have to clear them by hand. */ for (port = 0; port < uhci->rh_numports; ++port) outw(0, uhci->io_addr + USBPORTSC1 + (port * 2)); uhci->port_c_suspend = uhci->resuming_ports = 0; uhci->rh_state = UHCI_RH_RESET; uhci->is_stopped = UHCI_IS_STOPPED; uhci_to_hcd(uhci)->state = HC_STATE_HALT; uhci_to_hcd(uhci)->poll_rh = 0; uhci->dead = 0; /* Full reset resurrects the controller */ } /* * Last rites for a defunct/nonfunctional controller * or one we don't want to use any more. */ static void uhci_hc_died(struct uhci_hcd *uhci) { uhci_get_current_frame_number(uhci); uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr); finish_reset(uhci); uhci->dead = 1; /* The current frame may already be partway finished */ ++uhci->frame_number; } /* * Initialize a controller that was newly discovered or has lost power * or otherwise been reset while it was suspended. In none of these cases * can we be sure of its previous state. */ static void check_and_reset_hc(struct uhci_hcd *uhci) { if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr)) finish_reset(uhci); } /* * Store the basic register settings needed by the controller. */ static void configure_hc(struct uhci_hcd *uhci) { /* Set the frame length to the default: 1 ms exactly */ outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF); /* Store the frame list base address */ outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD); /* Set the current frame number */ outw(uhci->frame_number & UHCI_MAX_SOF_NUMBER, uhci->io_addr + USBFRNUM); /* Mark controller as not halted before we enable interrupts */ uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED; mb(); /* Enable PIRQ */ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, USBLEGSUP_DEFAULT); } static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci) { int port; /* If we have to ignore overcurrent events then almost by definition * we can't depend on resume-detect interrupts. */ if (ignore_oc) return 1; switch (to_pci_dev(uhci_dev(uhci))->vendor) { default: break; case PCI_VENDOR_ID_GENESYS: /* Genesys Logic's GL880S controllers don't generate * resume-detect interrupts. */ return 1; case PCI_VENDOR_ID_INTEL: /* Some of Intel's USB controllers have a bug that causes * resume-detect interrupts if any port has an over-current * condition. To make matters worse, some motherboards * hardwire unused USB ports' over-current inputs active! * To prevent problems, we will not enable resume-detect * interrupts if any ports are OC. */ for (port = 0; port < uhci->rh_numports; ++port) { if (inw(uhci->io_addr + USBPORTSC1 + port * 2) & USBPORTSC_OC) return 1; } break; } return 0; } static int remote_wakeup_is_broken(struct uhci_hcd *uhci) { int port; char *sys_info; static char bad_Asus_board[] = "A7V8X"; /* One of Asus's motherboards has a bug which causes it to * wake up immediately from suspend-to-RAM if any of the ports * are connected. In such cases we will not set EGSM. */ sys_info = dmi_get_system_info(DMI_BOARD_NAME); if (sys_info && !strcmp(sys_info, bad_Asus_board)) { for (port = 0; port < uhci->rh_numports; ++port) { if (inw(uhci->io_addr + USBPORTSC1 + port * 2) & USBPORTSC_CCS) return 1; } } return 0; } static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state) __releases(uhci->lock) __acquires(uhci->lock) { int auto_stop; int int_enable, egsm_enable; auto_stop = (new_state == UHCI_RH_AUTO_STOPPED); dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev, "%s%s\n", __FUNCTION__, (auto_stop ? " (auto-stop)" : "")); /* If we get a suspend request when we're already auto-stopped * then there's nothing to do. */ if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) { uhci->rh_state = new_state; return; } /* Enable resume-detect interrupts if they work. * Then enter Global Suspend mode if _it_ works, still configured. */ egsm_enable = USBCMD_EGSM; uhci->working_RD = 1; int_enable = USBINTR_RESUME; if (remote_wakeup_is_broken(uhci)) egsm_enable = 0; if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable) uhci->working_RD = int_enable = 0; outw(int_enable, uhci->io_addr + USBINTR); outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD); mb(); udelay(5); /* If we're auto-stopping then no devices have been attached * for a while, so there shouldn't be any active URBs and the * controller should stop after a few microseconds. Otherwise * we will give the controller one frame to stop. */ if (!auto_stop && !(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) { uhci->rh_state = UHCI_RH_SUSPENDING; spin_unlock_irq(&uhci->lock); msleep(1); spin_lock_irq(&uhci->lock); if (uhci->dead) return; } if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) dev_warn(&uhci_to_hcd(uhci)->self.root_hub->dev, "Controller not stopped yet!\n"); uhci_get_current_frame_number(uhci); uhci->rh_state = new_state; uhci->is_stopped = UHCI_IS_STOPPED; uhci_to_hcd(uhci)->poll_rh = !int_enable; uhci_scan_schedule(uhci); uhci_fsbr_off(uhci); } static void start_rh(struct uhci_hcd *uhci) { uhci_to_hcd(uhci)->state = HC_STATE_RUNNING; uhci->is_stopped = 0; /* Mark it configured and running with a 64-byte max packet. * All interrupts are enabled, even though RESUME won't do anything. */ outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, uhci->io_addr + USBCMD); outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP, uhci->io_addr + USBINTR); mb(); uhci->rh_state = UHCI_RH_RUNNING; uhci_to_hcd(uhci)->poll_rh = 1; } static void wakeup_rh(struct uhci_hcd *uhci) __releases(uhci->lock) __acquires(uhci->lock) { dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev, "%s%s\n", __FUNCTION__, uhci->rh_state == UHCI_RH_AUTO_STOPPED ? " (auto-start)" : ""); /* If we are auto-stopped then no devices are attached so there's * no need for wakeup signals. Otherwise we send Global Resume * for 20 ms. */ if (uhci->rh_state == UHCI_RH_SUSPENDED) { uhci->rh_state = UHCI_RH_RESUMING; outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF, uhci->io_addr + USBCMD); spin_unlock_irq(&uhci->lock); msleep(20); spin_lock_irq(&uhci->lock); if (uhci->dead) return; /* End Global Resume and wait for EOP to be sent */ outw(USBCMD_CF, uhci->io_addr + USBCMD); mb(); udelay(4); if (inw(uhci->io_addr + USBCMD) & USBCMD_FGR) dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n"); } start_rh(uhci); /* Restart root hub polling */ mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies); } static irqreturn_t uhci_irq(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); unsigned short status; unsigned long flags; /* * Read the interrupt status, and write it back to clear the * interrupt cause. Contrary to the UHCI specification, the * "HC Halted" status bit is persistent: it is RO, not R/WC. */ status = inw(uhci->io_addr + USBSTS); if (!(status & ~USBSTS_HCH)) /* shared interrupt, not mine */ return IRQ_NONE; outw(status, uhci->io_addr + USBSTS); /* Clear it */ if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) { if (status & USBSTS_HSE) dev_err(uhci_dev(uhci), "host system error, " "PCI problems?\n"); if (status & USBSTS_HCPE) dev_err(uhci_dev(uhci), "host controller process " "error, something bad happened!\n"); if (status & USBSTS_HCH) { spin_lock_irqsave(&uhci->lock, flags); if (uhci->rh_state >= UHCI_RH_RUNNING) { dev_err(uhci_dev(uhci), "host controller halted, " "very bad!\n"); if (debug > 1 && errbuf) { /* Print the schedule for debugging */ uhci_sprint_schedule(uhci, errbuf, ERRBUF_LEN); lprintk(errbuf); } uhci_hc_died(uhci); /* Force a callback in case there are * pending unlinks */ mod_timer(&hcd->rh_timer, jiffies); } spin_unlock_irqrestore(&uhci->lock, flags); } } if (status & USBSTS_RD) usb_hcd_poll_rh_status(hcd); else { spin_lock_irqsave(&uhci->lock, flags); uhci_scan_schedule(uhci); spin_unlock_irqrestore(&uhci->lock, flags); } return IRQ_HANDLED; } /* * Store the current frame number in uhci->frame_number if the controller * is runnning. Expand from 11 bits (of which we use only 10) to a * full-sized integer. * * Like many other parts of the driver, this code relies on being polled * more than once per second as long as the controller is running. */ static void uhci_get_current_frame_number(struct uhci_hcd *uhci) { if (!uhci->is_stopped) { unsigned delta; delta = (inw(uhci->io_addr + USBFRNUM) - uhci->frame_number) & (UHCI_NUMFRAMES - 1); uhci->frame_number += delta; } } /* * De-allocate all resources */ static void release_uhci(struct uhci_hcd *uhci) { int i; if (DEBUG_CONFIGURED) { spin_lock_irq(&uhci->lock); uhci->is_initialized = 0; spin_unlock_irq(&uhci->lock); debugfs_remove(uhci->dentry); } for (i = 0; i < UHCI_NUM_SKELQH; i++) uhci_free_qh(uhci, uhci->skelqh[i]); uhci_free_td(uhci, uhci->term_td); dma_pool_destroy(uhci->qh_pool); dma_pool_destroy(uhci->td_pool); kfree(uhci->frame_cpu); dma_free_coherent(uhci_dev(uhci), UHCI_NUMFRAMES * sizeof(*uhci->frame), uhci->frame, uhci->frame_dma_handle); } static int uhci_init(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); unsigned io_size = (unsigned) hcd->rsrc_len; int port; uhci->io_addr = (unsigned long) hcd->rsrc_start; /* The UHCI spec says devices must have 2 ports, and goes on to say * they may have more but gives no way to determine how many there * are. However according to the UHCI spec, Bit 7 of the port * status and control register is always set to 1. So we try to * use this to our advantage. Another common failure mode when * a nonexistent register is addressed is to return all ones, so * we test for that also. */ for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) { unsigned int portstatus; portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2)); if (!(portstatus & 0x0080) || portstatus == 0xffff) break; } if (debug) dev_info(uhci_dev(uhci), "detected %d ports\n", port); /* Anything greater than 7 is weird so we'll ignore it. */ if (port > UHCI_RH_MAXCHILD) { dev_info(uhci_dev(uhci), "port count misdetected? " "forcing to 2 ports\n"); port = 2; } uhci->rh_numports = port; /* Kick BIOS off this hardware and reset if the controller * isn't already safely quiescent. */ check_and_reset_hc(uhci); return 0; } /* Make sure the controller is quiescent and that we're not using it * any more. This is mainly for the benefit of programs which, like kexec, * expect the hardware to be idle: not doing DMA or generating IRQs. * * This routine may be called in a damaged or failing kernel. Hence we * do not acquire the spinlock before shutting down the controller. */ static void uhci_shutdown(struct pci_dev *pdev) { struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev); uhci_hc_died(hcd_to_uhci(hcd)); } /* * Allocate a frame list, and then setup the skeleton * * The hardware doesn't really know any difference * in the queues, but the order does matter for the * protocols higher up. The order is: * * - any isochronous events handled before any * of the queues. We don't do that here, because * we'll create the actual TD entries on demand. * - The first queue is the interrupt queue. * - The second queue is the control queue, split into low- and full-speed * - The third queue is bulk queue. * - The fourth queue is the bandwidth reclamation queue, which loops back * to the full-speed control queue. */ static int uhci_start(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); int retval = -EBUSY; int i; struct dentry *dentry; hcd->uses_new_polling = 1; spin_lock_init(&uhci->lock); setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout, (unsigned long) uhci); INIT_LIST_HEAD(&uhci->idle_qh_list); init_waitqueue_head(&uhci->waitqh); if (DEBUG_CONFIGURED) { dentry = debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci, &uhci_debug_operations); if (!dentry) { dev_err(uhci_dev(uhci), "couldn't create uhci " "debugfs entry\n"); retval = -ENOMEM; goto err_create_debug_entry; } uhci->dentry = dentry; } uhci->frame = dma_alloc_coherent(uhci_dev(uhci), UHCI_NUMFRAMES * sizeof(*uhci->frame), &uhci->frame_dma_handle, 0); if (!uhci->frame) { dev_err(uhci_dev(uhci), "unable to allocate " "consistent memory for frame list\n"); goto err_alloc_frame; } memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame)); uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu), GFP_KERNEL); if (!uhci->frame_cpu) { dev_err(uhci_dev(uhci), "unable to allocate " "memory for frame pointers\n"); goto err_alloc_frame_cpu; } uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci), sizeof(struct uhci_td), 16, 0); if (!uhci->td_pool) { dev_err(uhci_dev(uhci), "unable to create td dma_pool\n"); goto err_create_td_pool; } uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci), sizeof(struct uhci_qh), 16, 0); if (!uhci->qh_pool) { dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n"); goto err_create_qh_pool; } uhci->term_td = uhci_alloc_td(uhci); if (!uhci->term_td) { dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n"); goto err_alloc_term_td; } for (i = 0; i < UHCI_NUM_SKELQH; i++) { uhci->skelqh[i] = uhci_alloc_qh(uhci, NULL, NULL); if (!uhci->skelqh[i]) { dev_err(uhci_dev(uhci), "unable to allocate QH\n"); goto err_alloc_skelqh; } } /* * 8 Interrupt queues; link all higher int queues to int1, * then link int1 to control and control to bulk */ uhci->skel_int128_qh->link = uhci->skel_int64_qh->link = uhci->skel_int32_qh->link = uhci->skel_int16_qh->link = uhci->skel_int8_qh->link = uhci->skel_int4_qh->link = uhci->skel_int2_qh->link = UHCI_PTR_QH | cpu_to_le32(uhci->skel_int1_qh->dma_handle); uhci->skel_int1_qh->link = UHCI_PTR_QH | cpu_to_le32(uhci->skel_ls_control_qh->dma_handle); uhci->skel_ls_control_qh->link = UHCI_PTR_QH | cpu_to_le32(uhci->skel_fs_control_qh->dma_handle); uhci->skel_fs_control_qh->link = UHCI_PTR_QH | cpu_to_le32(uhci->skel_bulk_qh->dma_handle); uhci->skel_bulk_qh->link = UHCI_PTR_QH | cpu_to_le32(uhci->skel_term_qh->dma_handle); /* This dummy TD is to work around a bug in Intel PIIX controllers */ uhci_fill_td(uhci->term_td, 0, uhci_explen(0) | (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle); uhci->skel_term_qh->link = UHCI_PTR_TERM; uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle); /* * Fill the frame list: make all entries point to the proper * interrupt queue. * * The interrupt queues will be interleaved as evenly as possible. * There's not much to be done about period-1 interrupts; they have * to occur in every frame. But we can schedule period-2 interrupts * in odd-numbered frames, period-4 interrupts in frames congruent * to 2 (mod 4), and so on. This way each frame only has two * interrupt QHs, which will help spread out bandwidth utilization. */ for (i = 0; i < UHCI_NUMFRAMES; i++) { int irq; /* * ffs (Find First bit Set) does exactly what we need: * 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8], * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc. * ffs >= 7 => not on any high-period queue, so use * skel_int1_qh = skelqh[9]. * Add UHCI_NUMFRAMES to insure at least one bit is set. */ irq = 8 - (int) __ffs(i + UHCI_NUMFRAMES); if (irq <= 1) irq = 9; /* Only place we don't use the frame list routines */ uhci->frame[i] = UHCI_PTR_QH | cpu_to_le32(uhci->skelqh[irq]->dma_handle); } /* * Some architectures require a full mb() to enforce completion of * the memory writes above before the I/O transfers in configure_hc(). */ mb(); configure_hc(uhci); uhci->is_initialized = 1; start_rh(uhci); return 0; /* * error exits: */ err_alloc_skelqh: for (i = 0; i < UHCI_NUM_SKELQH; i++) { if (uhci->skelqh[i]) uhci_free_qh(uhci, uhci->skelqh[i]); } uhci_free_td(uhci, uhci->term_td); err_alloc_term_td: dma_pool_destroy(uhci->qh_pool); err_create_qh_pool: dma_pool_destroy(uhci->td_pool); err_create_td_pool: kfree(uhci->frame_cpu); err_alloc_frame_cpu: dma_free_coherent(uhci_dev(uhci), UHCI_NUMFRAMES * sizeof(*uhci->frame), uhci->frame, uhci->frame_dma_handle); err_alloc_frame: debugfs_remove(uhci->dentry); err_create_debug_entry: return retval; } static void uhci_stop(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); spin_lock_irq(&uhci->lock); if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead) uhci_hc_died(uhci); uhci_scan_schedule(uhci); spin_unlock_irq(&uhci->lock); del_timer_sync(&uhci->fsbr_timer); release_uhci(uhci); } #ifdef CONFIG_PM static int uhci_rh_suspend(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); int rc = 0; spin_lock_irq(&uhci->lock); if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) rc = -ESHUTDOWN; else if (!uhci->dead) suspend_rh(uhci, UHCI_RH_SUSPENDED); spin_unlock_irq(&uhci->lock); return rc; } static int uhci_rh_resume(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); int rc = 0; spin_lock_irq(&uhci->lock); if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { dev_warn(&hcd->self.root_hub->dev, "HC isn't running!\n"); rc = -ESHUTDOWN; } else if (!uhci->dead) wakeup_rh(uhci); spin_unlock_irq(&uhci->lock); return rc; } static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); int rc = 0; dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__); spin_lock_irq(&uhci->lock); if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) goto done_okay; /* Already suspended or dead */ if (uhci->rh_state > UHCI_RH_SUSPENDED) { dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); rc = -EBUSY; goto done; }; /* All PCI host controllers are required to disable IRQ generation * at the source, so we must turn off PIRQ. */ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0); mb(); hcd->poll_rh = 0; /* FIXME: Enable non-PME# remote wakeup? */ /* make sure snapshot being resumed re-enumerates everything */ if (message.event == PM_EVENT_PRETHAW) uhci_hc_died(uhci); done_okay: clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); done: spin_unlock_irq(&uhci->lock); return rc; } static int uhci_resume(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__); /* Since we aren't in D3 any more, it's safe to set this flag * even if the controller was dead. */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); mb(); spin_lock_irq(&uhci->lock); /* FIXME: Disable non-PME# remote wakeup? */ /* The firmware or a boot kernel may have changed the controller * settings during a system wakeup. Check it and reconfigure * to avoid problems. */ check_and_reset_hc(uhci); /* If the controller was dead before, it's back alive now */ configure_hc(uhci); if (uhci->rh_state == UHCI_RH_RESET) { /* The controller had to be reset */ usb_root_hub_lost_power(hcd->self.root_hub); suspend_rh(uhci, UHCI_RH_SUSPENDED); } spin_unlock_irq(&uhci->lock); if (!uhci->working_RD) { /* Suspended root hub needs to be polled */ hcd->poll_rh = 1; usb_hcd_poll_rh_status(hcd); } return 0; } #endif /* Wait until a particular device/endpoint's QH is idle, and free it */ static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); struct uhci_qh *qh; spin_lock_irq(&uhci->lock); qh = (struct uhci_qh *) hep->hcpriv; if (qh == NULL) goto done; while (qh->state != QH_STATE_IDLE) { ++uhci->num_waiting; spin_unlock_irq(&uhci->lock); wait_event_interruptible(uhci->waitqh, qh->state == QH_STATE_IDLE); spin_lock_irq(&uhci->lock); --uhci->num_waiting; } uhci_free_qh(uhci, qh); done: spin_unlock_irq(&uhci->lock); } static int uhci_hcd_get_frame_number(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); unsigned frame_number; unsigned delta; /* Minimize latency by avoiding the spinlock */ frame_number = uhci->frame_number; barrier(); delta = (inw(uhci->io_addr + USBFRNUM) - frame_number) & (UHCI_NUMFRAMES - 1); return frame_number + delta; } static const char hcd_name[] = "uhci_hcd"; static const struct hc_driver uhci_driver = { .description = hcd_name, .product_desc = "UHCI Host Controller", .hcd_priv_size = sizeof(struct uhci_hcd), /* Generic hardware linkage */ .irq = uhci_irq, .flags = HCD_USB11, /* Basic lifecycle operations */ .reset = uhci_init, .start = uhci_start, #ifdef CONFIG_PM .suspend = uhci_suspend, .resume = uhci_resume, .bus_suspend = uhci_rh_suspend, .bus_resume = uhci_rh_resume, #endif .stop = uhci_stop, .urb_enqueue = uhci_urb_enqueue, .urb_dequeue = uhci_urb_dequeue, .endpoint_disable = uhci_hcd_endpoint_disable, .get_frame_number = uhci_hcd_get_frame_number, .hub_status_data = uhci_hub_status_data, .hub_control = uhci_hub_control, }; static const struct pci_device_id uhci_pci_ids[] = { { /* handle any USB UHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0), .driver_data = (unsigned long) &uhci_driver, }, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, uhci_pci_ids); static struct pci_driver uhci_pci_driver = { .name = (char *)hcd_name, .id_table = uhci_pci_ids, .probe = usb_hcd_pci_probe, .remove = usb_hcd_pci_remove, .shutdown = uhci_shutdown, #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, .resume = usb_hcd_pci_resume, #endif /* PM */ }; static int __init uhci_hcd_init(void) { int retval = -ENOMEM; printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "%s\n", ignore_oc ? ", overcurrent ignored" : ""); if (usb_disabled()) return -ENODEV; if (DEBUG_CONFIGURED) { errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL); if (!errbuf) goto errbuf_failed; uhci_debugfs_root = debugfs_create_dir("uhci", NULL); if (!uhci_debugfs_root) goto debug_failed; } uhci_up_cachep = kmem_cache_create("uhci_urb_priv", sizeof(struct urb_priv), 0, 0, NULL, NULL); if (!uhci_up_cachep) goto up_failed; retval = pci_register_driver(&uhci_pci_driver); if (retval) goto init_failed; return 0; init_failed: kmem_cache_destroy(uhci_up_cachep); up_failed: debugfs_remove(uhci_debugfs_root); debug_failed: kfree(errbuf); errbuf_failed: return retval; } static void __exit uhci_hcd_cleanup(void) { pci_unregister_driver(&uhci_pci_driver); kmem_cache_destroy(uhci_up_cachep); debugfs_remove(uhci_debugfs_root); kfree(errbuf); } module_init(uhci_hcd_init); module_exit(uhci_hcd_cleanup); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL");