/* * w1_io.c * * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <asm/io.h> #include <linux/delay.h> #include <linux/moduleparam.h> #include <linux/module.h> #include "w1.h" #include "w1_log.h" static int w1_delay_parm = 1; module_param_named(delay_coef, w1_delay_parm, int, 0); static u8 w1_crc8_table[] = { 0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65, 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220, 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98, 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255, 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7, 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154, 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36, 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185, 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205, 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80, 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238, 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115, 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139, 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22, 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168, 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53 }; static void w1_delay(unsigned long tm) { udelay(tm * w1_delay_parm); } static void w1_write_bit(struct w1_master *dev, int bit); static u8 w1_read_bit(struct w1_master *dev); /** * Generates a write-0 or write-1 cycle and samples the level. */ static u8 w1_touch_bit(struct w1_master *dev, int bit) { if (dev->bus_master->touch_bit) return dev->bus_master->touch_bit(dev->bus_master->data, bit); else if (bit) return w1_read_bit(dev); else { w1_write_bit(dev, 0); return(0); } } /** * Generates a write-0 or write-1 cycle. * Only call if dev->bus_master->touch_bit is NULL */ static void w1_write_bit(struct w1_master *dev, int bit) { if (bit) { dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(6); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(64); } else { dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(60); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(10); } } /** * Writes 8 bits. * * @param dev the master device * @param byte the byte to write */ void w1_write_8(struct w1_master *dev, u8 byte) { int i; if (dev->bus_master->write_byte) dev->bus_master->write_byte(dev->bus_master->data, byte); else for (i = 0; i < 8; ++i) w1_touch_bit(dev, (byte >> i) & 0x1); } EXPORT_SYMBOL_GPL(w1_write_8); /** * Generates a write-1 cycle and samples the level. * Only call if dev->bus_master->touch_bit is NULL */ static u8 w1_read_bit(struct w1_master *dev) { int result; dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(6); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(9); result = dev->bus_master->read_bit(dev->bus_master->data); w1_delay(55); return result & 0x1; } /** * Does a triplet - used for searching ROM addresses. * Return bits: * bit 0 = id_bit * bit 1 = comp_bit * bit 2 = dir_taken * If both bits 0 & 1 are set, the search should be restarted. * * @param dev the master device * @param bdir the bit to write if both id_bit and comp_bit are 0 * @return bit fields - see above */ u8 w1_triplet(struct w1_master *dev, int bdir) { if ( dev->bus_master->triplet ) return(dev->bus_master->triplet(dev->bus_master->data, bdir)); else { u8 id_bit = w1_touch_bit(dev, 1); u8 comp_bit = w1_touch_bit(dev, 1); u8 retval; if ( id_bit && comp_bit ) return(0x03); /* error */ if ( !id_bit && !comp_bit ) { /* Both bits are valid, take the direction given */ retval = bdir ? 0x04 : 0; } else { /* Only one bit is valid, take that direction */ bdir = id_bit; retval = id_bit ? 0x05 : 0x02; } if ( dev->bus_master->touch_bit ) w1_touch_bit(dev, bdir); else w1_write_bit(dev, bdir); return(retval); } } /** * Reads 8 bits. * * @param dev the master device * @return the byte read */ static u8 w1_read_8(struct w1_master * dev) { int i; u8 res = 0; if (dev->bus_master->read_byte) res = dev->bus_master->read_byte(dev->bus_master->data); else for (i = 0; i < 8; ++i) res |= (w1_touch_bit(dev,1) << i); return res; } /** * Writes a series of bytes. * * @param dev the master device * @param buf pointer to the data to write * @param len the number of bytes to write * @return the byte read */ void w1_write_block(struct w1_master *dev, const u8 *buf, int len) { int i; if (dev->bus_master->write_block) dev->bus_master->write_block(dev->bus_master->data, buf, len); else for (i = 0; i < len; ++i) w1_write_8(dev, buf[i]); } EXPORT_SYMBOL_GPL(w1_write_block); /** * Reads a series of bytes. * * @param dev the master device * @param buf pointer to the buffer to fill * @param len the number of bytes to read * @return the number of bytes read */ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len) { int i; u8 ret; if (dev->bus_master->read_block) ret = dev->bus_master->read_block(dev->bus_master->data, buf, len); else { for (i = 0; i < len; ++i) buf[i] = w1_read_8(dev); ret = len; } return ret; } EXPORT_SYMBOL_GPL(w1_read_block); /** * Issues a reset bus sequence. * * @param dev The bus master pointer * @return 0=Device present, 1=No device present or error */ int w1_reset_bus(struct w1_master *dev) { int result; if (dev->bus_master->reset_bus) result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1; else { dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(480); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(70); result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1; w1_delay(410); } return result; } EXPORT_SYMBOL_GPL(w1_reset_bus); u8 w1_calc_crc8(u8 * data, int len) { u8 crc = 0; while (len--) crc = w1_crc8_table[crc ^ *data++]; return crc; } EXPORT_SYMBOL_GPL(w1_calc_crc8); void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb) { dev->attempts++; if (dev->bus_master->search) dev->bus_master->search(dev->bus_master->data, search_type, cb); else w1_search(dev, search_type, cb); } /** * Resets the bus and then selects the slave by sending either a skip rom * or a rom match. * The w1 master lock must be held. * * @param sl the slave to select * @return 0=success, anything else=error */ int w1_reset_select_slave(struct w1_slave *sl) { if (w1_reset_bus(sl->master)) return -1; if (sl->master->slave_count == 1) w1_write_8(sl->master, W1_SKIP_ROM); else { u8 match[9] = {W1_MATCH_ROM, }; memcpy(&match[1], (u8 *)&sl->reg_num, 8); w1_write_block(sl->master, match, 9); } return 0; } EXPORT_SYMBOL_GPL(w1_reset_select_slave);