#ifndef _LINUX_TTY_H #define _LINUX_TTY_H /* * 'tty.h' defines some structures used by tty_io.c and some defines. */ #define NR_LDISCS 30 /* line disciplines */ #define N_TTY 0 #define N_SLIP 1 #define N_MOUSE 2 #define N_PPP 3 #define N_STRIP 4 #define N_AX25 5 #define N_X25 6 /* X.25 async */ #define N_6PACK 7 #define N_MASC 8 /* Reserved for Mobitex module */ #define N_R3964 9 /* Reserved for Simatic R3964 module */ #define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ #define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */ #define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */ /* cards about SMS messages */ #define N_HDLC 13 /* synchronous HDLC */ #define N_SYNC_PPP 14 /* synchronous PPP */ #define N_HCI 15 /* Bluetooth HCI UART */ #define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */ #define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */ #define N_PPS 18 /* Pulse per Second */ #define N_V253 19 /* Codec control over voice modem */ #define N_CAIF 20 /* CAIF protocol for talking to modems */ #define N_GSM0710 21 /* GSM 0710 Mux */ #define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ #define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */ #define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ #ifdef __KERNEL__ #include #include #include #include #include #include #include #include /* * (Note: the *_driver.minor_start values 1, 64, 128, 192 are * hardcoded at present.) */ #define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */ #define NR_UNIX98_PTY_RESERVE 1024 /* Default reserve for main devpts */ #define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */ /* * This character is the same as _POSIX_VDISABLE: it cannot be used as * a c_cc[] character, but indicates that a particular special character * isn't in use (eg VINTR has no character etc) */ #define __DISABLED_CHAR '\0' struct tty_buffer { struct tty_buffer *next; char *char_buf_ptr; unsigned char *flag_buf_ptr; int used; int size; int commit; int read; /* Data points here */ unsigned long data[0]; }; /* * We default to dicing tty buffer allocations to this many characters * in order to avoid multiple page allocations. We know the size of * tty_buffer itself but it must also be taken into account that the * the buffer is 256 byte aligned. See tty_buffer_find for the allocation * logic this must match */ #define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF) struct tty_bufhead { struct work_struct work; spinlock_t lock; struct tty_buffer *head; /* Queue head */ struct tty_buffer *tail; /* Active buffer */ struct tty_buffer *free; /* Free queue head */ int memory_used; /* Buffer space used excluding free queue */ }; /* * When a break, frame error, or parity error happens, these codes are * stuffed into the flags buffer. */ #define TTY_NORMAL 0 #define TTY_BREAK 1 #define TTY_FRAME 2 #define TTY_PARITY 3 #define TTY_OVERRUN 4 #define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR]) #define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT]) #define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE]) #define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL]) #define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF]) #define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME]) #define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN]) #define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC]) #define START_CHAR(tty) ((tty)->termios->c_cc[VSTART]) #define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP]) #define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP]) #define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL]) #define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT]) #define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD]) #define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE]) #define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT]) #define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2]) #define _I_FLAG(tty, f) ((tty)->termios->c_iflag & (f)) #define _O_FLAG(tty, f) ((tty)->termios->c_oflag & (f)) #define _C_FLAG(tty, f) ((tty)->termios->c_cflag & (f)) #define _L_FLAG(tty, f) ((tty)->termios->c_lflag & (f)) #define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK) #define I_BRKINT(tty) _I_FLAG((tty), BRKINT) #define I_IGNPAR(tty) _I_FLAG((tty), IGNPAR) #define I_PARMRK(tty) _I_FLAG((tty), PARMRK) #define I_INPCK(tty) _I_FLAG((tty), INPCK) #define I_ISTRIP(tty) _I_FLAG((tty), ISTRIP) #define I_INLCR(tty) _I_FLAG((tty), INLCR) #define I_IGNCR(tty) _I_FLAG((tty), IGNCR) #define I_ICRNL(tty) _I_FLAG((tty), ICRNL) #define I_IUCLC(tty) _I_FLAG((tty), IUCLC) #define I_IXON(tty) _I_FLAG((tty), IXON) #define I_IXANY(tty) _I_FLAG((tty), IXANY) #define I_IXOFF(tty) _I_FLAG((tty), IXOFF) #define I_IMAXBEL(tty) _I_FLAG((tty), IMAXBEL) #define I_IUTF8(tty) _I_FLAG((tty), IUTF8) #define O_OPOST(tty) _O_FLAG((tty), OPOST) #define O_OLCUC(tty) _O_FLAG((tty), OLCUC) #define O_ONLCR(tty) _O_FLAG((tty), ONLCR) #define O_OCRNL(tty) _O_FLAG((tty), OCRNL) #define O_ONOCR(tty) _O_FLAG((tty), ONOCR) #define O_ONLRET(tty) _O_FLAG((tty), ONLRET) #define O_OFILL(tty) _O_FLAG((tty), OFILL) #define O_OFDEL(tty) _O_FLAG((tty), OFDEL) #define O_NLDLY(tty) _O_FLAG((tty), NLDLY) #define O_CRDLY(tty) _O_FLAG((tty), CRDLY) #define O_TABDLY(tty) _O_FLAG((tty), TABDLY) #define O_BSDLY(tty) _O_FLAG((tty), BSDLY) #define O_VTDLY(tty) _O_FLAG((tty), VTDLY) #define O_FFDLY(tty) _O_FLAG((tty), FFDLY) #define C_BAUD(tty) _C_FLAG((tty), CBAUD) #define C_CSIZE(tty) _C_FLAG((tty), CSIZE) #define C_CSTOPB(tty) _C_FLAG((tty), CSTOPB) #define C_CREAD(tty) _C_FLAG((tty), CREAD) #define C_PARENB(tty) _C_FLAG((tty), PARENB) #define C_PARODD(tty) _C_FLAG((tty), PARODD) #define C_HUPCL(tty) _C_FLAG((tty), HUPCL) #define C_CLOCAL(tty) _C_FLAG((tty), CLOCAL) #define C_CIBAUD(tty) _C_FLAG((tty), CIBAUD) #define C_CRTSCTS(tty) _C_FLAG((tty), CRTSCTS) #define L_ISIG(tty) _L_FLAG((tty), ISIG) #define L_ICANON(tty) _L_FLAG((tty), ICANON) #define L_XCASE(tty) _L_FLAG((tty), XCASE) #define L_ECHO(tty) _L_FLAG((tty), ECHO) #define L_ECHOE(tty) _L_FLAG((tty), ECHOE) #define L_ECHOK(tty) _L_FLAG((tty), ECHOK) #define L_ECHONL(tty) _L_FLAG((tty), ECHONL) #define L_NOFLSH(tty) _L_FLAG((tty), NOFLSH) #define L_TOSTOP(tty) _L_FLAG((tty), TOSTOP) #define L_ECHOCTL(tty) _L_FLAG((tty), ECHOCTL) #define L_ECHOPRT(tty) _L_FLAG((tty), ECHOPRT) #define L_ECHOKE(tty) _L_FLAG((tty), ECHOKE) #define L_FLUSHO(tty) _L_FLAG((tty), FLUSHO) #define L_PENDIN(tty) _L_FLAG((tty), PENDIN) #define L_IEXTEN(tty) _L_FLAG((tty), IEXTEN) #define L_EXTPROC(tty) _L_FLAG((tty), EXTPROC) struct device; struct signal_struct; /* * Port level information. Each device keeps its own port level information * so provide a common structure for those ports wanting to use common support * routines. * * The tty port has a different lifetime to the tty so must be kept apart. * In addition be careful as tty -> port mappings are valid for the life * of the tty object but in many cases port -> tty mappings are valid only * until a hangup so don't use the wrong path. */ struct tty_port; struct tty_port_operations { /* Return 1 if the carrier is raised */ int (*carrier_raised)(struct tty_port *port); /* Control the DTR line */ void (*dtr_rts)(struct tty_port *port, int raise); /* Called when the last close completes or a hangup finishes IFF the port was initialized. Do not use to free resources. Called under the port mutex to serialize against activate/shutdowns */ void (*shutdown)(struct tty_port *port); void (*drop)(struct tty_port *port); /* Called under the port mutex from tty_port_open, serialized using the port mutex */ /* FIXME: long term getting the tty argument *out* of this would be good for consoles */ int (*activate)(struct tty_port *port, struct tty_struct *tty); /* Called on the final put of a port */ void (*destruct)(struct tty_port *port); }; struct tty_port { struct tty_struct *tty; /* Back pointer */ const struct tty_port_operations *ops; /* Port operations */ spinlock_t lock; /* Lock protecting tty field */ int blocked_open; /* Waiting to open */ int count; /* Usage count */ wait_queue_head_t open_wait; /* Open waiters */ wait_queue_head_t close_wait; /* Close waiters */ wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ unsigned char console:1; /* port is a console */ struct mutex mutex; /* Locking */ struct mutex buf_mutex; /* Buffer alloc lock */ unsigned char *xmit_buf; /* Optional buffer */ unsigned int close_delay; /* Close port delay */ unsigned int closing_wait; /* Delay for output */ int drain_delay; /* Set to zero if no pure time based drain is needed else set to size of fifo */ struct kref kref; /* Ref counter */ }; /* * Where all of the state associated with a tty is kept while the tty * is open. Since the termios state should be kept even if the tty * has been closed --- for things like the baud rate, etc --- it is * not stored here, but rather a pointer to the real state is stored * here. Possible the winsize structure should have the same * treatment, but (1) the default 80x24 is usually right and (2) it's * most often used by a windowing system, which will set the correct * size each time the window is created or resized anyway. * - TYT, 9/14/92 */ struct tty_operations; struct tty_struct { int magic; struct kref kref; struct device *dev; struct tty_driver *driver; const struct tty_operations *ops; int index; /* Protects ldisc changes: Lock tty not pty */ struct mutex ldisc_mutex; struct tty_ldisc *ldisc; struct mutex termios_mutex; spinlock_t ctrl_lock; /* Termios values are protected by the termios mutex */ struct ktermios *termios, *termios_locked; struct termiox *termiox; /* May be NULL for unsupported */ char name[64]; struct pid *pgrp; /* Protected by ctrl lock */ struct pid *session; unsigned long flags; int count; struct winsize winsize; /* termios mutex */ unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1; unsigned char low_latency:1, warned:1; unsigned char ctrl_status; /* ctrl_lock */ unsigned int receive_room; /* Bytes free for queue */ struct tty_struct *link; struct fasync_struct *fasync; struct tty_bufhead buf; /* Locked internally */ int alt_speed; /* For magic substitution of 38400 bps */ wait_queue_head_t write_wait; wait_queue_head_t read_wait; struct work_struct hangup_work; void *disc_data; void *driver_data; struct list_head tty_files; #define N_TTY_BUF_SIZE 4096 /* * The following is data for the N_TTY line discipline. For * historical reasons, this is included in the tty structure. * Mostly locked by the BKL. */ unsigned int column; unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; unsigned char closing:1; unsigned char echo_overrun:1; unsigned short minimum_to_wake; unsigned long overrun_time; int num_overrun; unsigned long process_char_map[256/(8*sizeof(unsigned long))]; char *read_buf; int read_head; int read_tail; int read_cnt; unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))]; unsigned char *echo_buf; unsigned int echo_pos; unsigned int echo_cnt; int canon_data; unsigned long canon_head; unsigned int canon_column; struct mutex atomic_read_lock; struct mutex atomic_write_lock; struct mutex output_lock; struct mutex echo_lock; unsigned char *write_buf; int write_cnt; spinlock_t read_lock; /* If the tty has a pending do_SAK, queue it here - akpm */ struct work_struct SAK_work; struct tty_port *port; }; /* Each of a tty's open files has private_data pointing to tty_file_private */ struct tty_file_private { struct tty_struct *tty; struct file *file; struct list_head list; }; /* tty magic number */ #define TTY_MAGIC 0x5401 /* * These bits are used in the flags field of the tty structure. * * So that interrupts won't be able to mess up the queues, * copy_to_cooked must be atomic with respect to itself, as must * tty->write. Thus, you must use the inline functions set_bit() and * clear_bit() to make things atomic. */ #define TTY_THROTTLED 0 /* Call unthrottle() at threshold min */ #define TTY_IO_ERROR 1 /* Cause an I/O error (may be no ldisc too) */ #define TTY_OTHER_CLOSED 2 /* Other side (if any) has closed */ #define TTY_EXCLUSIVE 3 /* Exclusive open mode */ #define TTY_DEBUG 4 /* Debugging */ #define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */ #define TTY_PUSH 6 /* n_tty private */ #define TTY_CLOSING 7 /* ->close() in progress */ #define TTY_LDISC 9 /* Line discipline attached */ #define TTY_LDISC_CHANGING 10 /* Line discipline changing */ #define TTY_LDISC_OPEN 11 /* Line discipline is open */ #define TTY_HW_COOK_OUT 14 /* Hardware can do output cooking */ #define TTY_HW_COOK_IN 15 /* Hardware can do input cooking */ #define TTY_PTY_LOCK 16 /* pty private */ #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ #define TTY_HUPPED 18 /* Post driver->hangup() */ #define TTY_FLUSHING 19 /* Flushing to ldisc in progress */ #define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */ #define TTY_HUPPING 21 /* ->hangup() in progress */ #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) extern void tty_write_flush(struct tty_struct *); extern struct ktermios tty_std_termios; extern void console_init(void); extern int vcs_init(void); extern struct class *tty_class; /** * tty_kref_get - get a tty reference * @tty: tty device * * Return a new reference to a tty object. The caller must hold * sufficient locks/counts to ensure that their existing reference cannot * go away */ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) { if (tty) kref_get(&tty->kref); return tty; } extern void tty_kref_put(struct tty_struct *tty); extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, const char *routine); extern char *tty_name(struct tty_struct *tty, char *buf); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int tty_check_change(struct tty_struct *tty); extern void stop_tty(struct tty_struct *tty); extern void start_tty(struct tty_struct *tty); extern int tty_register_driver(struct tty_driver *driver); extern int tty_unregister_driver(struct tty_driver *driver); extern struct device *tty_register_device(struct tty_driver *driver, unsigned index, struct device *dev); extern void tty_unregister_device(struct tty_driver *driver, unsigned index); extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp, int buflen); extern void tty_write_message(struct tty_struct *tty, char *msg); extern int tty_put_char(struct tty_struct *tty, unsigned char c); extern int tty_chars_in_buffer(struct tty_struct *tty); extern int tty_write_room(struct tty_struct *tty); extern void tty_driver_flush_buffer(struct tty_struct *tty); extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); extern void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty); extern void tty_shutdown(struct tty_struct *tty); extern void tty_free_termios(struct tty_struct *tty); extern int is_current_pgrp_orphaned(void); extern struct pid *tty_get_pgrp(struct tty_struct *tty); extern int is_ignored(int sig); extern int tty_signal(int sig, struct tty_struct *tty); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); extern void tty_vhangup_locked(struct tty_struct *tty); extern void tty_vhangup_self(void); extern void tty_unhangup(struct file *filp); extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); extern void disassociate_ctty(int priv); extern void no_tty(void); extern void tty_flip_buffer_push(struct tty_struct *tty); extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_struct *tty); extern void tty_buffer_flush(struct tty_struct *tty); extern void tty_buffer_init(struct tty_struct *tty); extern speed_t tty_get_baud_rate(struct tty_struct *tty); extern speed_t tty_termios_baud_rate(struct ktermios *termios); extern speed_t tty_termios_input_baud_rate(struct ktermios *termios); extern void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud); extern void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud); extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); extern void tty_ldisc_deref(struct tty_ldisc *); extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *); extern void tty_ldisc_hangup(struct tty_struct *tty); extern const struct file_operations tty_ldiscs_proc_fops; extern void tty_wakeup(struct tty_struct *tty); extern void tty_ldisc_flush(struct tty_struct *tty); extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg); extern dev_t tty_devnum(struct tty_struct *tty); extern void proc_clear_tty(struct task_struct *p); extern struct tty_struct *get_current_tty(void); extern void tty_default_fops(struct file_operations *fops); extern struct tty_struct *alloc_tty_struct(void); extern int tty_alloc_file(struct file *file); extern void tty_add_file(struct tty_struct *tty, struct file *file); extern void tty_free_file(struct file *file); extern void free_tty_struct(struct tty_struct *tty); extern void initialize_tty_struct(struct tty_struct *tty, struct tty_driver *driver, int idx); extern void deinitialize_tty_struct(struct tty_struct *tty); extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx); extern int tty_release(struct inode *inode, struct file *filp); extern int tty_init_termios(struct tty_struct *tty); extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty); extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty); extern struct mutex tty_mutex; extern spinlock_t tty_files_lock; extern void tty_write_unlock(struct tty_struct *tty); extern int tty_write_lock(struct tty_struct *tty, int ndelay); #define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock)) extern void tty_port_init(struct tty_port *port); extern int tty_port_alloc_xmit_buf(struct tty_port *port); extern void tty_port_free_xmit_buf(struct tty_port *port); extern void tty_port_put(struct tty_port *port); static inline struct tty_port *tty_port_get(struct tty_port *port) { if (port) kref_get(&port->kref); return port; } extern struct tty_struct *tty_port_tty_get(struct tty_port *port); extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty); extern int tty_port_carrier_raised(struct tty_port *port); extern void tty_port_raise_dtr_rts(struct tty_port *port); extern void tty_port_lower_dtr_rts(struct tty_port *port); extern void tty_port_hangup(struct tty_port *port); extern int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp); extern int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp); extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); extern void tty_port_close(struct tty_port *port, struct tty_struct *tty, struct file *filp); extern int tty_port_open(struct tty_port *port, struct tty_struct *tty, struct file *filp); static inline int tty_port_users(struct tty_port *port) { return port->count + port->blocked_open; } extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); extern int tty_unregister_ldisc(int disc); extern int tty_set_ldisc(struct tty_struct *tty, int ldisc); extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty); extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty); extern void tty_ldisc_init(struct tty_struct *tty); extern void tty_ldisc_deinit(struct tty_struct *tty); extern void tty_ldisc_begin(void); /* This last one is just for the tty layer internals and shouldn't be used elsewhere */ extern void tty_ldisc_enable(struct tty_struct *tty); /* n_tty.c */ extern struct tty_ldisc_ops tty_ldisc_N_TTY; extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops); /* tty_audit.c */ #ifdef CONFIG_AUDIT extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data, size_t size); extern void tty_audit_exit(void); extern void tty_audit_fork(struct signal_struct *sig); extern void tty_audit_tiocsti(struct tty_struct *tty, char ch); extern void tty_audit_push(struct tty_struct *tty); extern int tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid); #else static inline void tty_audit_add_data(struct tty_struct *tty, unsigned char *data, size_t size) { } static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch) { } static inline void tty_audit_exit(void) { } static inline void tty_audit_fork(struct signal_struct *sig) { } static inline void tty_audit_push(struct tty_struct *tty) { } static inline int tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid) { return 0; } #endif /* tty_io.c */ extern int __init tty_init(void); /* tty_ioctl.c */ extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); /* serial.c */ extern void serial_console_init(void); /* pcxx.c */ extern int pcxe_open(struct tty_struct *tty, struct file *filp); /* vt.c */ extern int vt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); extern long vt_compat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); /* tty_mutex.c */ /* functions for preparation of BKL removal */ extern void __lockfunc tty_lock(void) __acquires(tty_lock); extern void __lockfunc tty_unlock(void) __releases(tty_lock); /* * this shall be called only from where BTM is held (like close) * * We need this to ensure nobody waits for us to finish while we are waiting. * Without this we were encountering system stalls. * * This should be indeed removed with BTM removal later. * * Locking: BTM required. Nobody is allowed to hold port->mutex. */ static inline void tty_wait_until_sent_from_close(struct tty_struct *tty, long timeout) { tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */ tty_wait_until_sent(tty, timeout); tty_lock(); } /* * wait_event_interruptible_tty -- wait for a condition with the tty lock held * * The condition we are waiting for might take a long time to * become true, or might depend on another thread taking the * BTM. In either case, we need to drop the BTM to guarantee * forward progress. This is a leftover from the conversion * from the BKL and should eventually get removed as the BTM * falls out of use. * * Do not use in new code. */ #define wait_event_interruptible_tty(wq, condition) \ ({ \ int __ret = 0; \ if (!(condition)) { \ __wait_event_interruptible_tty(wq, condition, __ret); \ } \ __ret; \ }) #define __wait_event_interruptible_tty(wq, condition, ret) \ do { \ DEFINE_WAIT(__wait); \ \ for (;;) { \ prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE); \ if (condition) \ break; \ if (!signal_pending(current)) { \ tty_unlock(); \ schedule(); \ tty_lock(); \ continue; \ } \ ret = -ERESTARTSYS; \ break; \ } \ finish_wait(&wq, &__wait); \ } while (0) #endif /* __KERNEL__ */ #endif