/* * USB Serial Converter stuff * * Copyright (C) 1999 - 2005 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * */ #ifndef __LINUX_USB_SERIAL_H #define __LINUX_USB_SERIAL_H #include #include #include #include #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ #define SERIAL_TTY_MINORS 254 /* loads of devices :) */ #define SERIAL_TTY_NO_MINOR 255 /* No minor was assigned */ /* The maximum number of ports one device can grab at once */ #define MAX_NUM_PORTS 8 /* parity check flag */ #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) enum port_dev_state { PORT_UNREGISTERED, PORT_REGISTERING, PORT_REGISTERED, PORT_UNREGISTERING, }; /* USB serial flags */ #define USB_SERIAL_WRITE_BUSY 0 /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. * @number: the number of the port (the minor number). * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe * for this port. * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe * for this port. * @bulk_in_buffer: pointer to the bulk in buffer for this port. * @bulk_in_size: the size of the bulk_in_buffer, in bytes. * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. * @write_fifo: kfifo used to buffer outgoing data * @write_urb_busy: port`s writing status * @bulk_out_buffers: pointers to the bulk out buffers for this port * @write_urbs: pointers to the bulk out urbs for this port * @write_urbs_free: status bitmap the for bulk out urbs * @tx_bytes: number of bytes currently in host stack queues * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. * @flags: usb serial port flags * @write_wait: a wait_queue_head_t used by the port. * @work: work queue entry for the line discipline waking up. * @throttled: nonzero if the read urb is inactive to throttle the device * @throttle_req: nonzero if the tty wants to throttle us * @dev: pointer to the serial device * * This structure is used by the usb-serial core and drivers for the specific * ports of a device. */ struct usb_serial_port { struct usb_serial *serial; struct tty_port port; spinlock_t lock; unsigned char number; unsigned char *interrupt_in_buffer; struct urb *interrupt_in_urb; __u8 interrupt_in_endpointAddress; unsigned char *interrupt_out_buffer; int interrupt_out_size; struct urb *interrupt_out_urb; __u8 interrupt_out_endpointAddress; unsigned char *bulk_in_buffer; int bulk_in_size; struct urb *read_urb; __u8 bulk_in_endpointAddress; unsigned char *bulk_out_buffer; int bulk_out_size; struct urb *write_urb; struct kfifo write_fifo; int write_urb_busy; unsigned char *bulk_out_buffers[2]; struct urb *write_urbs[2]; unsigned long write_urbs_free; __u8 bulk_out_endpointAddress; int tx_bytes; unsigned long flags; wait_queue_head_t write_wait; struct work_struct work; char throttled; char throttle_req; unsigned long sysrq; /* sysrq timeout */ struct device dev; enum port_dev_state dev_state; }; #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) /* get and set the port private data pointer helper functions */ static inline void *usb_get_serial_port_data(struct usb_serial_port *port) { return dev_get_drvdata(&port->dev); } static inline void usb_set_serial_port_data(struct usb_serial_port *port, void *data) { dev_set_drvdata(&port->dev, data); } /** * usb_serial - structure used by the usb-serial core for a device * @dev: pointer to the struct usb_device for this device * @type: pointer to the struct usb_serial_driver for this device * @interface: pointer to the struct usb_interface for this device * @minor: the starting minor number for this device * @num_ports: the number of ports this device has * @num_interrupt_in: number of interrupt in endpoints we have * @num_interrupt_out: number of interrupt out endpoints we have * @num_bulk_in: number of bulk in endpoints we have * @num_bulk_out: number of bulk out endpoints we have * @port: array of struct usb_serial_port structures for the different ports. * @private: place to put any driver specific information that is needed. The * usb-serial driver is required to manage this data, the usb-serial core * will not touch this. Use usb_get_serial_data() and * usb_set_serial_data() to access this. */ struct usb_serial { struct usb_device *dev; struct usb_serial_driver *type; struct usb_interface *interface; unsigned char disconnected:1; unsigned char suspending:1; unsigned char attached:1; unsigned char minor; unsigned char num_ports; unsigned char num_port_pointers; char num_interrupt_in; char num_interrupt_out; char num_bulk_in; char num_bulk_out; struct usb_serial_port *port[MAX_NUM_PORTS]; struct kref kref; struct mutex disc_mutex; void *private; }; #define to_usb_serial(d) container_of(d, struct usb_serial, kref) /* get and set the serial private data pointer helper functions */ static inline void *usb_get_serial_data(struct usb_serial *serial) { return serial->private; } static inline void usb_set_serial_data(struct usb_serial *serial, void *data) { serial->private = data; } /** * usb_serial_driver - describes a usb serial driver * @description: pointer to a string that describes this driver. This string * used in the syslog messages when a device is inserted or removed. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_ports: the number of different ports this device will have. * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer * (0 = end-point size) * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) * @calc_num_ports: pointer to a function to determine how many ports this * device has dynamically. It will be called after the probe() * callback is called, but before attach() * @probe: pointer to the driver's probe function. * This will be called when the device is inserted into the system, * but before the device has been fully initialized by the usb_serial * subsystem. Use this function to download any firmware to the device, * or any other early initialization that might be needed. * Return 0 to continue on with the initialization sequence. Anything * else will abort it. * @attach: pointer to the driver's attach function. * This will be called when the struct usb_serial structure is fully set * set up. Do any local initialization of the device, or any private * memory structure allocation at this point in time. * @disconnect: pointer to the driver's disconnect function. This will be * called when the device is unplugged or unbound from the driver. * @release: pointer to the driver's release function. This will be called * when the usb_serial data structure is about to be destroyed. * @usb_driver: pointer to the struct usb_driver that controls this * device. This is necessary to allow dynamic ids to be added to * the driver from sysfs. * * This structure is defines a USB Serial driver. It provides all of * the information that the USB serial core code needs. If the function * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. * * The driver.owner field should be set to the module owner of this driver. * The driver.name field should be set to the name of this driver (remember * it will show up in sysfs, so it needs to be short and to the point. * Using the module name is a good idea.) */ struct usb_serial_driver { const char *description; const struct usb_device_id *id_table; char num_ports; struct list_head driver_list; struct device_driver driver; struct usb_driver *usb_driver; struct usb_dynids dynids; size_t bulk_in_size; size_t bulk_out_size; int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); int (*attach)(struct usb_serial *serial); int (*calc_num_ports) (struct usb_serial *serial); void (*disconnect)(struct usb_serial *serial); void (*release)(struct usb_serial *serial); int (*port_probe)(struct usb_serial_port *port); int (*port_remove)(struct usb_serial_port *port); int (*suspend)(struct usb_serial *serial, pm_message_t message); int (*resume)(struct usb_serial *serial); /* serial function calls */ /* Called by console and by the tty layer */ int (*open)(struct tty_struct *tty, struct usb_serial_port *port); void (*close)(struct usb_serial_port *port); int (*write)(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); /* Called only by the tty layer */ int (*write_room)(struct tty_struct *tty); int (*ioctl)(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); void (*set_termios)(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty, struct file *file); int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); int (*get_icount)(struct tty_struct *tty, struct serial_icounter_struct *icount); /* Called by the tty layer for port level work. There may or may not be an attached tty at this point */ void (*dtr_rts)(struct usb_serial_port *port, int on); int (*carrier_raised)(struct usb_serial_port *port); /* Called by the usb serial hooks to allow the user to rework the termios state */ void (*init_termios)(struct tty_struct *tty); /* USB events */ void (*read_int_callback)(struct urb *urb); void (*write_int_callback)(struct urb *urb); void (*read_bulk_callback)(struct urb *urb); void (*write_bulk_callback)(struct urb *urb); /* Called by the generic read bulk callback */ void (*process_read_urb)(struct urb *urb); /* Called by the generic write implementation */ int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); }; #define to_usb_serial_driver(d) \ container_of(d, struct usb_serial_driver, driver) extern int usb_serial_register(struct usb_serial_driver *driver); extern void usb_serial_deregister(struct usb_serial_driver *driver); extern void usb_serial_port_softint(struct usb_serial_port *port); extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); extern void usb_serial_disconnect(struct usb_interface *iface); extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); extern int usb_serial_resume(struct usb_interface *intf); extern int ezusb_writememory(struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest); extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit); /* USB Serial console functions */ #ifdef CONFIG_USB_SERIAL_CONSOLE extern void usb_serial_console_init(int debug, int minor); extern void usb_serial_console_exit(void); extern void usb_serial_console_disconnect(struct usb_serial *serial); #else static inline void usb_serial_console_init(int debug, int minor) { } static inline void usb_serial_console_exit(void) { } static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} #endif /* Functions needed by other parts of the usbserial core */ extern struct usb_serial *usb_serial_get_by_index(unsigned int minor); extern void usb_serial_put(struct usb_serial *serial); extern int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port); extern int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); extern void usb_serial_generic_close(struct usb_serial_port *port); extern int usb_serial_generic_resume(struct usb_serial *serial); extern int usb_serial_generic_write_room(struct tty_struct *tty); extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); extern void usb_serial_generic_unthrottle(struct tty_struct *tty); extern void usb_serial_generic_disconnect(struct usb_serial *serial); extern void usb_serial_generic_release(struct usb_serial *serial); extern int usb_serial_generic_register(int debug); extern void usb_serial_generic_deregister(void); extern int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags); extern void usb_serial_generic_process_read_urb(struct urb *urb); extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size); extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch); extern int usb_serial_handle_break(struct usb_serial_port *port); extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, struct tty_struct *tty, unsigned int status); extern int usb_serial_bus_register(struct usb_serial_driver *device); extern void usb_serial_bus_deregister(struct usb_serial_driver *device); extern struct usb_serial_driver usb_serial_generic_device; extern struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; static inline void usb_serial_debug_data(int debug, struct device *dev, const char *function, int size, const unsigned char *data) { int i; if (debug) { dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size); for (i = 0; i < size; ++i) printk("%.2x ", data[i]); printk("\n"); } } /* Use our own dbg macro */ #undef dbg #define dbg(format, arg...) \ do { \ if (debug) \ printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ } while (0) #endif /* __LINUX_USB_SERIAL_H */