/* * Initialisation code for Cyrix/NatSemi VSA1 softaudio * * (C) Copyright 2003 Red Hat Inc <alan@lxorguk.ukuu.org.uk> * * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems. * The older version (VSA1) provides fairly good soundblaster emulation * although there are a couple of bugs: large DMA buffers break record, * and the MPU event handling seems suspect. VSA2 allows the native driver * to control the AC97 audio engine directly and requires a different driver. * * Thanks to National Semiconductor for providing the needed information * on the XpressAudio(tm) internals. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * TO DO: * Investigate whether we can portably support Cognac (5520) in the * same manner. */ #include <linux/delay.h> #include <linux/init.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/slab.h> #include "sound_config.h" #include "sb.h" /* * Read a soundblaster compatible mixer register. * In this case we are actually reading an SMI trap * not real hardware. */ static u8 mixer_read(unsigned long io, u8 reg) { outb(reg, io + 4); udelay(20); reg = inb(io + 5); udelay(20); return reg; } static int probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) { struct address_info *hw_config; unsigned long base; void __iomem *mem; unsigned long io; u16 map; u8 irq, dma8, dma16; int oldquiet; extern int sb_be_quiet; base = pci_resource_start(pdev, 0); if(base == 0UL) return 1; mem = ioremap(base, 128); if (!mem) return 1; map = readw(mem + 0x18); /* Read the SMI enables */ iounmap(mem); /* Map bits 0:1 * 0x20 + 0x200 = sb base 2 sb enable 3 adlib enable 5 MPU enable 0x330 6 MPU enable 0x300 The other bits may be used internally so must be masked */ io = 0x220 + 0x20 * (map & 3); if(map & (1<<2)) printk(KERN_INFO "kahlua: XpressAudio at 0x%lx\n", io); else return 1; if(map & (1<<5)) printk(KERN_INFO "kahlua: MPU at 0x300\n"); else if(map & (1<<6)) printk(KERN_INFO "kahlua: MPU at 0x330\n"); irq = mixer_read(io, 0x80) & 0x0F; dma8 = mixer_read(io, 0x81); // printk("IRQ=%x MAP=%x DMA=%x\n", irq, map, dma8); if(dma8 & 0x20) dma16 = 5; else if(dma8 & 0x40) dma16 = 6; else if(dma8 & 0x80) dma16 = 7; else { printk(KERN_ERR "kahlua: No 16bit DMA enabled.\n"); return 1; } if(dma8 & 0x01) dma8 = 0; else if(dma8 & 0x02) dma8 = 1; else if(dma8 & 0x08) dma8 = 3; else { printk(KERN_ERR "kahlua: No 8bit DMA enabled.\n"); return 1; } if(irq & 1) irq = 9; else if(irq & 2) irq = 5; else if(irq & 4) irq = 7; else if(irq & 8) irq = 10; else { printk(KERN_ERR "kahlua: SB IRQ not set.\n"); return 1; } printk(KERN_INFO "kahlua: XpressAudio on IRQ %d, DMA %d, %d\n", irq, dma8, dma16); hw_config = kzalloc(sizeof(struct address_info), GFP_KERNEL); if(hw_config == NULL) { printk(KERN_ERR "kahlua: out of memory.\n"); return 1; } pci_set_drvdata(pdev, hw_config); hw_config->io_base = io; hw_config->irq = irq; hw_config->dma = dma8; hw_config->dma2 = dma16; hw_config->name = "Cyrix XpressAudio"; hw_config->driver_use_1 = SB_NO_MIDI | SB_PCI_IRQ; if (!request_region(io, 16, "soundblaster")) goto err_out_free; if(sb_dsp_detect(hw_config, 0, 0, NULL)==0) { printk(KERN_ERR "kahlua: audio not responding.\n"); release_region(io, 16); goto err_out_free; } oldquiet = sb_be_quiet; sb_be_quiet = 1; if(sb_dsp_init(hw_config, THIS_MODULE)) { sb_be_quiet = oldquiet; goto err_out_free; } sb_be_quiet = oldquiet; return 0; err_out_free: pci_set_drvdata(pdev, NULL); kfree(hw_config); return 1; } static void remove_one(struct pci_dev *pdev) { struct address_info *hw_config = pci_get_drvdata(pdev); sb_dsp_unload(hw_config, 0); pci_set_drvdata(pdev, NULL); kfree(hw_config); } MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("Kahlua VSA1 PCI Audio"); MODULE_LICENSE("GPL"); /* * 5530 only. The 5510/5520 decode is different. */ static DEFINE_PCI_DEVICE_TABLE(id_tbl) = { { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 }, { } }; MODULE_DEVICE_TABLE(pci, id_tbl); static struct pci_driver kahlua_driver = { .name = "kahlua", .id_table = id_tbl, .probe = probe_one, .remove = remove_one, }; static int __init kahlua_init_module(void) { printk(KERN_INFO "Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc\n"); return pci_register_driver(&kahlua_driver); } static void kahlua_cleanup_module(void) { pci_unregister_driver(&kahlua_driver); } module_init(kahlua_init_module); module_exit(kahlua_cleanup_module);