summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
blob: 5fa44f52a0b805aa9d9362d4634e3372824df2b7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276

* Marvell MBus

Required properties:

- compatible:	 Should be set to one of the following:
		 marvell,armada370-mbus
		 marvell,armadaxp-mbus
		 marvell,armada370-mbus
		 marvell,armadaxp-mbus
		 marvell,kirkwood-mbus
		 marvell,dove-mbus
		 marvell,orion5x-88f5281-mbus
		 marvell,orion5x-88f5182-mbus
		 marvell,orion5x-88f5181-mbus
		 marvell,orion5x-88f6183-mbus
		 marvell,mv78xx0-mbus

- address-cells: Must be '2'. The first cell for the MBus ID encoding,
                 the second cell for the address offset within the window.

- size-cells:    Must be '1'.

- ranges:        Must be set up to provide a proper translation for each child.
	         See the examples below.

- controller:    Contains a single phandle referring to the MBus controller
                 node. This allows to specify the node that contains the
		 registers that control the MBus, which is typically contained
		 within the internal register window (see below).

Optional properties:

- pcie-mem-aperture:	This optional property contains the aperture for
			the memory region of the PCIe driver.
			If it's defined, it must encode the base address and
			size for the address decoding windows allocated for
			the PCIe memory region.

- pcie-io-aperture:	Just as explained for the above property, this
			optional property contains the aperture for the
			I/O region of the PCIe driver.

* Marvell MBus controller

Required properties:

- compatible:	Should be set to "marvell,mbus-controller".

- reg:          Device's register space.
		Two entries are expected (see the examples below):
		the first one controls the devices decoding window and
		the second one controls the SDRAM decoding window.

Example:

	soc {
		compatible = "marvell,armada370-mbus", "simple-bus";
		#address-cells = <2>;
		#size-cells = <1>;
		controller = <&mbusc>;
		pcie-mem-aperture = <0xe0000000 0x8000000>;
		pcie-io-aperture  = <0xe8000000 0x100000>;

		internal-regs {
			compatible = "simple-bus";

			mbusc: mbus-controller@20000 {
				compatible = "marvell,mbus-controller";
				reg = <0x20000 0x100>, <0x20180 0x20>;
			};

			/* more children ...*/
		};
	};

** MBus address decoding window specification

The MBus children address space is comprised of two cells: the first one for
the window ID and the second one for the offset within the window.
In order to allow to describe valid and non-valid window entries, the
following encoding is used:

  0xSIAA0000 0x00oooooo

Where:

  S = 0x0 for a MBus valid window
  S = 0xf for a non-valid window (see below)

If S = 0x0, then:

   I = 4-bit window target ID
  AA = windpw attribute

If S = 0xf, then:

   I = don't care
   AA = 1 for internal register

Following the above encoding, for each ranges entry for a MBus valid window
(S = 0x0), an address decoding window is allocated. On the other side,
entries for translation that do not correspond to valid windows (S = 0xf)
are skipped.

	soc {
		compatible = "marvell,armada370-mbus", "simple-bus";
		#address-cells = <2>;
		#size-cells = <1>;
		controller = <&mbusc>;

		ranges = <0xf0010000 0 0 0xd0000000 0x100000
			  0x01e00000 0 0 0xfff00000 0x100000>;

		bootrom {
			compatible = "marvell,bootrom";
			reg = <0x01e00000 0 0x100000>;
		};

		/* other children */
		...

		internal-regs {
			compatible = "simple-bus";
			ranges = <0 0xf0010000 0 0x100000>;

			mbusc: mbus-controller@20000 {
				compatible = "marvell,mbus-controller";
				reg = <0x20000 0x100>, <0x20180 0x20>;
			};

			/* more children ...*/
		};
	};

In the shown example, the translation entry in the 'ranges' property is what
makes the MBus driver create a static decoding window for the corresponding
given child device. Note that the binding does not require child nodes to be
present. Of course, child nodes are needed to probe the devices.

Since each window is identified by its target ID and attribute ID there's
a special macro that can be use to simplify the translation entries:

#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))

Using this macro, the above example would be:

	soc {
		compatible = "marvell,armada370-mbus", "simple-bus";
		#address-cells = <2>;
		#size-cells = <1>;
		controller = <&mbusc>;

		ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
			   MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;

		bootrom {
			compatible = "marvell,bootrom";
			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
		};

		/* other children */
		...

		internal-regs {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;

			mbusc: mbus-controller@20000 {
				compatible = "marvell,mbus-controller";
				reg = <0x20000 0x100>, <0x20180 0x20>;
			};

			/* other children */
			...
		};
	};


** About the window base address

Remember the MBus controller allows a great deal of flexibility for choosing
the decoding window base address. When planning the device tree layout it's
possible to choose any address as the base address, provided of course there's
a region large enough available, and with the required alignment.

Yet in other words: there's nothing preventing us from setting a base address
of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
unused.

** Window allocation policy

The mbus-node ranges property defines a set of mbus windows that are expected
to be set by the operating system and that are guaranteed to be free of overlaps
with one another or with the system memory ranges.

Each entry in the property refers to exactly one window. If the operating system
chooses to use a different set of mbus windows, it must ensure that any address
translations performed from downstream devices are adapted accordingly.

The operating system may insert additional mbus windows that do not conflict
with the ones listed in the ranges, e.g. for mapping PCIe devices.
As a special case, the internal register window must be set up by the boot
loader at the address listed in the ranges property, since access to that region
is needed to set up the other windows.

** Example

See the example below, where a more complete device tree is shown:

	soc {
		compatible = "marvell,armadaxp-mbus", "simple-bus";
		controller = <&mbusc>;

		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000   /* internal-regs */
			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;

		bootrom {
			compatible = "marvell,bootrom";
			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
		};

		devbus-bootcs {
			status = "okay";
			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;

			/* NOR */
			nor {
				compatible = "cfi-flash";
				reg = <0 0x8000000>;
				bank-width = <2>;
			};
		};

		pcie-controller {
			compatible = "marvell,armada-xp-pcie";
			status = "okay";
			device_type = "pci";

			#address-cells = <3>;
			#size-cells = <2>;

			ranges =
			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
				0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
				0x81000800 0 0          MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;


			pcie@1,0 {
				/* Port 0, Lane 0 */
				status = "okay";
			};
		};

		internal-regs {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;

			mbusc: mbus-controller@20000 {
				reg = <0x20000 0x100>, <0x20180 0x20>;
			};

			interrupt-controller@20000 {
			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
			};
		};
	};