summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/clock/altr_socfpga.txt
blob: 5dfd145d3ccf673492e91eee8f9b43d94a3faee0 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Device Tree Clock bindings for Altera's SoCFPGA platform

This binding uses the common clock binding[1].

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt

Required properties:
- compatible : shall be one of the following:
	"altr,socfpga-pll-clock" - for a PLL clock
	"altr,socfpga-perip-clock" - The peripheral clock divided from the
		PLL clock.
	"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
		can get gated.

- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
- clocks : shall be the input parent clock phandle for the clock. This is
	either an oscillator or a pll output.
- #clock-cells : from common clock binding, shall be set to 0.

Optional properties:
- fixed-divider : If clocks have a fixed divider value, use this property.
- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
        and the bit index.
- div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift,
        and width.
- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
	the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
	value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
	hold/delay times that is needed for the SD/MMC CIU clock. The values of both
	can be 0-315 degrees, in 45 degree increments.