1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
|
QorIQ DPAA Queue Manager Device Tree Binding
Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
CONTENTS
- QMan Node
- QMan Private Memory Nodes
- Example
QMan Node
The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
supports queuing and QoS scheduling of frames to CPUs, network interfaces and
DPAA logic modules, maintains packet ordering within flows. Besides providing
flow-level queuing, is also responsible for congestion management functions such
as RED/WRED, congestion notifications and tail discards. This binding covers the
CCSR space programming model
PROPERTIES
- compatible
Usage: Required
Value type: <stringlist>
Definition: Must include "fsl,qman"
May include "fsl,<SoC>-qman"
- reg
Usage: Required
Value type: <prop-encoded-array>
Definition: Registers region within the CCSR address space
The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
are located at offsets 0xbf8 and 0xbfc
- interrupts
Usage: Required
Value type: <prop-encoded-array>
Definition: Standard property. The error interrupt
- fsl,liodn
Usage: See pamu.txt
Value type: <prop-encoded-array>
Definition: PAMU property used for static LIODN assignment
- fsl,iommu-parent
Usage: See pamu.txt
Value type: <phandle>
Definition: PAMU property used for dynamic LIODN assignment
For additional details about the PAMU/LIODN binding(s) see pamu.txt
- clocks
Usage: See clock-bindings.txt and qoriq-clock.txt
Value type: <prop-encoded-array>
Definition: Reference input clock. Its frequency is half of the
platform clock
Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
to the respective QMan instance
- fsl,qman
Usage: Required
Value type: <prop-encoded-array>
Description: List of phandle and DCP index pairs, to the QMan instance
to which this device is connected via the DCP
QMan Private Memory Nodes
QMan requires two contiguous range of physical memory used for the backing store
for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
This memory is reserved/allocated as a nodes under the /reserved-memory node
The QMan FQD memory node must be named "qman-fqd"
PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
Definition: Must inclide "fsl,qman-fqd"
The QMan PFDR memory node must be named "qman-pfdr"
PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
Definition: Must inclide "fsl,qman-pfdr"
The following constraints are relevant to the FQD and PFDR private memory:
- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
1 GiB
- The alignment must be a muliptle of the memory size
The size of the FQD and PFDP must be chosen by observing the hardware features
configured via the Reset Configuration Word (RCW) and that are relevant to a
specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
FMan ports, etc.). The size configured in the DT must reflect the hardware
capabilities and not the specific needs of an application
For additional details about reserved memory regions see reserved-memory.txt
EXAMPLE
The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
qman_fqd: qman-fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0xf 0xffffffff>;
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0xf 0xffffffff>;
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
The example below shows a (P4080) QMan CCSR-space node
clockgen: global-utilities@e1000 {
...
sysclk: sysclk {
...
};
...
platform_pll: platform-pll@c00 {
#clock-cells = <1>;
reg = <0xc00 0x4>;
compatible = "fsl,qoriq-platform-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "platform-pll", "platform-pll-div2";
};
...
};
crypto@300000 {
...
fsl,qman = <&qman, 2>;
...
};
qman: qman@318000 {
compatible = "fsl,qman";
reg = <0x318000 0x1000>;
interrupts = <16 2 1 3>
fsl,liodn = <0x16>;
memory-region = <&qman_fqd &qman_pfdr>;
clocks = <&platform_pll 1>;
};
fman@400000 {
...
fsl,qman = <&qman, 0>;
...
};
|
