1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
|
*******************************************************************************
** ARECA FIRMWARE SPEC
*******************************************************************************
** Usage of IOP331 adapter
** (All In/Out is in IOP331's view)
** 1. Message 0 --> InitThread message and retrun code
** 2. Doorbell is used for RS-232 emulation
** inDoorBell : bit0 -- data in ready
** (DRIVER DATA WRITE OK)
** bit1 -- data out has been read
** (DRIVER DATA READ OK)
** outDooeBell: bit0 -- data out ready
** (IOP331 DATA WRITE OK)
** bit1 -- data in has been read
** (IOP331 DATA READ OK)
** 3. Index Memory Usage
** offset 0xf00 : for RS232 out (request buffer)
** offset 0xe00 : for RS232 in (scratch buffer)
** offset 0xa00 : for inbound message code message_rwbuffer
** (driver send to IOP331)
** offset 0xa00 : for outbound message code message_rwbuffer
** (IOP331 send to driver)
** 4. RS-232 emulation
** Currently 128 byte buffer is used
** 1st uint32_t : Data length (1--124)
** Byte 4--127 : Max 124 bytes of data
** 5. PostQ
** All SCSI Command must be sent through postQ:
** (inbound queue port) Request frame must be 32 bytes aligned
** #bit27--bit31 => flag for post ccb
** #bit0--bit26 => real address (bit27--bit31) of post arcmsr_cdb
** bit31 :
** 0 : 256 bytes frame
** 1 : 512 bytes frame
** bit30 :
** 0 : normal request
** 1 : BIOS request
** bit29 : reserved
** bit28 : reserved
** bit27 : reserved
** ---------------------------------------------------------------------------
** (outbount queue port) Request reply
** #bit27--bit31
** => flag for reply
** #bit0--bit26
** => real address (bit27--bit31) of reply arcmsr_cdb
** bit31 : must be 0 (for this type of reply)
** bit30 : reserved for BIOS handshake
** bit29 : reserved
** bit28 :
** 0 : no error, ignore AdapStatus/DevStatus/SenseData
** 1 : Error, error code in AdapStatus/DevStatus/SenseData
** bit27 : reserved
** 6. BIOS request
** All BIOS request is the same with request from PostQ
** Except :
** Request frame is sent from configuration space
** offset: 0x78 : Request Frame (bit30 == 1)
** offset: 0x18 : writeonly to generate
** IRQ to IOP331
** Completion of request:
** (bit30 == 0, bit28==err flag)
** 7. Definition of SGL entry (structure)
** 8. Message1 Out - Diag Status Code (????)
** 9. Message0 message code :
** 0x00 : NOP
** 0x01 : Get Config
** ->offset 0xa00 :for outbound message code message_rwbuffer
** (IOP331 send to driver)
** Signature 0x87974060(4)
** Request len 0x00000200(4)
** numbers of queue 0x00000100(4)
** SDRAM Size 0x00000100(4)-->256 MB
** IDE Channels 0x00000008(4)
** vendor 40 bytes char
** model 8 bytes char
** FirmVer 16 bytes char
** Device Map 16 bytes char
** FirmwareVersion DWORD <== Added for checking of
** new firmware capability
** 0x02 : Set Config
** ->offset 0xa00 :for inbound message code message_rwbuffer
** (driver send to IOP331)
** Signature 0x87974063(4)
** UPPER32 of Request Frame (4)-->Driver Only
** 0x03 : Reset (Abort all queued Command)
** 0x04 : Stop Background Activity
** 0x05 : Flush Cache
** 0x06 : Start Background Activity
** (re-start if background is halted)
** 0x07 : Check If Host Command Pending
** (Novell May Need This Function)
** 0x08 : Set controller time
** ->offset 0xa00 : for inbound message code message_rwbuffer
** (driver to IOP331)
** byte 0 : 0xaa <-- signature
** byte 1 : 0x55 <-- signature
** byte 2 : year (04)
** byte 3 : month (1..12)
** byte 4 : date (1..31)
** byte 5 : hour (0..23)
** byte 6 : minute (0..59)
** byte 7 : second (0..59)
*******************************************************************************
*******************************************************************************
** RS-232 Interface for Areca Raid Controller
** The low level command interface is exclusive with VT100 terminal
** --------------------------------------------------------------------
** 1. Sequence of command execution
** --------------------------------------------------------------------
** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
** (B) Command block : variable length of data including length,
** command code, data and checksum byte
** (C) Return data : variable length of data
** --------------------------------------------------------------------
** 2. Command block
** --------------------------------------------------------------------
** (A) 1st byte : command block length (low byte)
** (B) 2nd byte : command block length (high byte)
** note ..command block length shouldn't > 2040 bytes,
** length excludes these two bytes
** (C) 3rd byte : command code
** (D) 4th and following bytes : variable length data bytes
** depends on command code
** (E) last byte : checksum byte (sum of 1st byte until last data byte)
** --------------------------------------------------------------------
** 3. Command code and associated data
** --------------------------------------------------------------------
** The following are command code defined in raid controller Command
** code 0x10--0x1? are used for system level management,
** no password checking is needed and should be implemented in separate
** well controlled utility and not for end user access.
** Command code 0x20--0x?? always check the password,
** password must be entered to enable these command.
** enum
** {
** GUI_SET_SERIAL=0x10,
** GUI_SET_VENDOR,
** GUI_SET_MODEL,
** GUI_IDENTIFY,
** GUI_CHECK_PASSWORD,
** GUI_LOGOUT,
** GUI_HTTP,
** GUI_SET_ETHERNET_ADDR,
** GUI_SET_LOGO,
** GUI_POLL_EVENT,
** GUI_GET_EVENT,
** GUI_GET_HW_MONITOR,
** // GUI_QUICK_CREATE=0x20, (function removed)
** GUI_GET_INFO_R=0x20,
** GUI_GET_INFO_V,
** GUI_GET_INFO_P,
** GUI_GET_INFO_S,
** GUI_CLEAR_EVENT,
** GUI_MUTE_BEEPER=0x30,
** GUI_BEEPER_SETTING,
** GUI_SET_PASSWORD,
** GUI_HOST_INTERFACE_MODE,
** GUI_REBUILD_PRIORITY,
** GUI_MAX_ATA_MODE,
** GUI_RESET_CONTROLLER,
** GUI_COM_PORT_SETTING,
** GUI_NO_OPERATION,
** GUI_DHCP_IP,
** GUI_CREATE_PASS_THROUGH=0x40,
** GUI_MODIFY_PASS_THROUGH,
** GUI_DELETE_PASS_THROUGH,
** GUI_IDENTIFY_DEVICE,
** GUI_CREATE_RAIDSET=0x50,
** GUI_DELETE_RAIDSET,
** GUI_EXPAND_RAIDSET,
** GUI_ACTIVATE_RAIDSET,
** GUI_CREATE_HOT_SPARE,
** GUI_DELETE_HOT_SPARE,
** GUI_CREATE_VOLUME=0x60,
** GUI_MODIFY_VOLUME,
** GUI_DELETE_VOLUME,
** GUI_START_CHECK_VOLUME,
** GUI_STOP_CHECK_VOLUME
** };
** Command description :
** GUI_SET_SERIAL : Set the controller serial#
** byte 0,1 : length
** byte 2 : command code 0x10
** byte 3 : password length (should be 0x0f)
** byte 4-0x13 : should be "ArEcATecHnoLogY"
** byte 0x14--0x23 : Serial number string (must be 16 bytes)
** GUI_SET_VENDOR : Set vendor string for the controller
** byte 0,1 : length
** byte 2 : command code 0x11
** byte 3 : password length (should be 0x08)
** byte 4-0x13 : should be "ArEcAvAr"
** byte 0x14--0x3B : vendor string (must be 40 bytes)
** GUI_SET_MODEL : Set the model name of the controller
** byte 0,1 : length
** byte 2 : command code 0x12
** byte 3 : password length (should be 0x08)
** byte 4-0x13 : should be "ArEcAvAr"
** byte 0x14--0x1B : model string (must be 8 bytes)
** GUI_IDENTIFY : Identify device
** byte 0,1 : length
** byte 2 : command code 0x13
** return "Areca RAID Subsystem "
** GUI_CHECK_PASSWORD : Verify password
** byte 0,1 : length
** byte 2 : command code 0x14
** byte 3 : password length
** byte 4-0x?? : user password to be checked
** GUI_LOGOUT : Logout GUI (force password checking on next command)
** byte 0,1 : length
** byte 2 : command code 0x15
** GUI_HTTP : HTTP interface (reserved for Http proxy service)(0x16)
**
** GUI_SET_ETHERNET_ADDR : Set the ethernet MAC address
** byte 0,1 : length
** byte 2 : command code 0x17
** byte 3 : password length (should be 0x08)
** byte 4-0x13 : should be "ArEcAvAr"
** byte 0x14--0x19 : Ethernet MAC address (must be 6 bytes)
** GUI_SET_LOGO : Set logo in HTTP
** byte 0,1 : length
** byte 2 : command code 0x18
** byte 3 : Page# (0/1/2/3) (0xff --> clear OEM logo)
** byte 4/5/6/7 : 0x55/0xaa/0xa5/0x5a
** byte 8 : TITLE.JPG data (each page must be 2000 bytes)
** note page0 1st 2 byte must be
** actual length of the JPG file
** GUI_POLL_EVENT : Poll If Event Log Changed
** byte 0,1 : length
** byte 2 : command code 0x19
** GUI_GET_EVENT : Read Event
** byte 0,1 : length
** byte 2 : command code 0x1a
** byte 3 : Event Page (0:1st page/1/2/3:last page)
** GUI_GET_HW_MONITOR : Get HW monitor data
** byte 0,1 : length
** byte 2 : command code 0x1b
** byte 3 : # of FANs(example 2)
** byte 4 : # of Voltage sensor(example 3)
** byte 5 : # of temperature sensor(example 2)
** byte 6 : # of power
** byte 7/8 : Fan#0 (RPM)
** byte 9/10 : Fan#1
** byte 11/12 : Voltage#0 original value in *1000
** byte 13/14 : Voltage#0 value
** byte 15/16 : Voltage#1 org
** byte 17/18 : Voltage#1
** byte 19/20 : Voltage#2 org
** byte 21/22 : Voltage#2
** byte 23 : Temp#0
** byte 24 : Temp#1
** byte 25 : Power indicator (bit0 : power#0,
** bit1 : power#1)
** byte 26 : UPS indicator
** GUI_QUICK_CREATE : Quick create raid/volume set
** byte 0,1 : length
** byte 2 : command code 0x20
** byte 3/4/5/6 : raw capacity
** byte 7 : raid level
** byte 8 : stripe size
** byte 9 : spare
** byte 10/11/12/13: device mask (the devices to create raid/volume)
** This function is removed, application like
** to implement quick create function
** need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function.
** GUI_GET_INFO_R : Get Raid Set Information
** byte 0,1 : length
** byte 2 : command code 0x20
** byte 3 : raidset#
** typedef struct sGUI_RAIDSET
** {
** BYTE grsRaidSetName[16];
** DWORD grsCapacity;
** DWORD grsCapacityX;
** DWORD grsFailMask;
** BYTE grsDevArray[32];
** BYTE grsMemberDevices;
** BYTE grsNewMemberDevices;
** BYTE grsRaidState;
** BYTE grsVolumes;
** BYTE grsVolumeList[16];
** BYTE grsRes1;
** BYTE grsRes2;
** BYTE grsRes3;
** BYTE grsFreeSegments;
** DWORD grsRawStripes[8];
** DWORD grsRes4;
** DWORD grsRes5; // Total to 128 bytes
** DWORD grsRes6; // Total to 128 bytes
** } sGUI_RAIDSET, *pGUI_RAIDSET;
** GUI_GET_INFO_V : Get Volume Set Information
** byte 0,1 : length
** byte 2 : command code 0x21
** byte 3 : volumeset#
** typedef struct sGUI_VOLUMESET
** {
** BYTE gvsVolumeName[16]; // 16
** DWORD gvsCapacity;
** DWORD gvsCapacityX;
** DWORD gvsFailMask;
** DWORD gvsStripeSize;
** DWORD gvsNewFailMask;
** DWORD gvsNewStripeSize;
** DWORD gvsVolumeStatus;
** DWORD gvsProgress; // 32
** sSCSI_ATTR gvsScsi;
** BYTE gvsMemberDisks;
** BYTE gvsRaidLevel; // 8
** BYTE gvsNewMemberDisks;
** BYTE gvsNewRaidLevel;
** BYTE gvsRaidSetNumber;
** BYTE gvsRes0; // 4
** BYTE gvsRes1[4]; // 64 bytes
** } sGUI_VOLUMESET, *pGUI_VOLUMESET;
** GUI_GET_INFO_P : Get Physical Drive Information
** byte 0,1 : length
** byte 2 : command code 0x22
** byte 3 : drive # (from 0 to max-channels - 1)
** typedef struct sGUI_PHY_DRV
** {
** BYTE gpdModelName[40];
** BYTE gpdSerialNumber[20];
** BYTE gpdFirmRev[8];
** DWORD gpdCapacity;
** DWORD gpdCapacityX; // Reserved for expansion
** BYTE gpdDeviceState;
** BYTE gpdPioMode;
** BYTE gpdCurrentUdmaMode;
** BYTE gpdUdmaMode;
** BYTE gpdDriveSelect;
** BYTE gpdRaidNumber; // 0xff if not belongs to a raid set
** sSCSI_ATTR gpdScsi;
** BYTE gpdReserved[40]; // Total to 128 bytes
** } sGUI_PHY_DRV, *pGUI_PHY_DRV;
** GUI_GET_INFO_S : Get System Information
** byte 0,1 : length
** byte 2 : command code 0x23
** typedef struct sCOM_ATTR
** {
** BYTE comBaudRate;
** BYTE comDataBits;
** BYTE comStopBits;
** BYTE comParity;
** BYTE comFlowControl;
** } sCOM_ATTR, *pCOM_ATTR;
** typedef struct sSYSTEM_INFO
** {
** BYTE gsiVendorName[40];
** BYTE gsiSerialNumber[16];
** BYTE gsiFirmVersion[16];
** BYTE gsiBootVersion[16];
** BYTE gsiMbVersion[16];
** BYTE gsiModelName[8];
** BYTE gsiLocalIp[4];
** BYTE gsiCurrentIp[4];
** DWORD gsiTimeTick;
** DWORD gsiCpuSpeed;
** DWORD gsiICache;
** DWORD gsiDCache;
** DWORD gsiScache;
** DWORD gsiMemorySize;
** DWORD gsiMemorySpeed;
** DWORD gsiEvents;
** BYTE gsiMacAddress[6];
** BYTE gsiDhcp;
** BYTE gsiBeeper;
** BYTE gsiChannelUsage;
** BYTE gsiMaxAtaMode;
** BYTE gsiSdramEcc; // 1:if ECC enabled
** BYTE gsiRebuildPriority;
** sCOM_ATTR gsiComA; // 5 bytes
** sCOM_ATTR gsiComB; // 5 bytes
** BYTE gsiIdeChannels;
** BYTE gsiScsiHostChannels;
** BYTE gsiIdeHostChannels;
** BYTE gsiMaxVolumeSet;
** BYTE gsiMaxRaidSet;
** BYTE gsiEtherPort; // 1:if ether net port supported
** BYTE gsiRaid6Engine; // 1:Raid6 engine supported
** BYTE gsiRes[75];
** } sSYSTEM_INFO, *pSYSTEM_INFO;
** GUI_CLEAR_EVENT : Clear System Event
** byte 0,1 : length
** byte 2 : command code 0x24
** GUI_MUTE_BEEPER : Mute current beeper
** byte 0,1 : length
** byte 2 : command code 0x30
** GUI_BEEPER_SETTING : Disable beeper
** byte 0,1 : length
** byte 2 : command code 0x31
** byte 3 : 0->disable, 1->enable
** GUI_SET_PASSWORD : Change password
** byte 0,1 : length
** byte 2 : command code 0x32
** byte 3 : pass word length ( must <= 15 )
** byte 4 : password (must be alpha-numerical)
** GUI_HOST_INTERFACE_MODE : Set host interface mode
** byte 0,1 : length
** byte 2 : command code 0x33
** byte 3 : 0->Independent, 1->cluster
** GUI_REBUILD_PRIORITY : Set rebuild priority
** byte 0,1 : length
** byte 2 : command code 0x34
** byte 3 : 0/1/2/3 (low->high)
** GUI_MAX_ATA_MODE : Set maximum ATA mode to be used
** byte 0,1 : length
** byte 2 : command code 0x35
** byte 3 : 0/1/2/3 (133/100/66/33)
** GUI_RESET_CONTROLLER : Reset Controller
** byte 0,1 : length
** byte 2 : command code 0x36
** *Response with VT100 screen (discard it)
** GUI_COM_PORT_SETTING : COM port setting
** byte 0,1 : length
** byte 2 : command code 0x37
** byte 3 : 0->COMA (term port),
** 1->COMB (debug port)
** byte 4 : 0/1/2/3/4/5/6/7
** (1200/2400/4800/9600/19200/38400/57600/115200)
** byte 5 : data bit
** (0:7 bit, 1:8 bit : must be 8 bit)
** byte 6 : stop bit (0:1, 1:2 stop bits)
** byte 7 : parity (0:none, 1:off, 2:even)
** byte 8 : flow control
** (0:none, 1:xon/xoff, 2:hardware => must use none)
** GUI_NO_OPERATION : No operation
** byte 0,1 : length
** byte 2 : command code 0x38
** GUI_DHCP_IP : Set DHCP option and local IP address
** byte 0,1 : length
** byte 2 : command code 0x39
** byte 3 : 0:dhcp disabled, 1:dhcp enabled
** byte 4/5/6/7 : IP address
** GUI_CREATE_PASS_THROUGH : Create pass through disk
** byte 0,1 : length
** byte 2 : command code 0x40
** byte 3 : device #
** byte 4 : scsi channel (0/1)
** byte 5 : scsi id (0-->15)
** byte 6 : scsi lun (0-->7)
** byte 7 : tagged queue (1 : enabled)
** byte 8 : cache mode (1 : enabled)
** byte 9 : max speed (0/1/2/3/4,
** async/20/40/80/160 for scsi)
** (0/1/2/3/4, 33/66/100/133/150 for ide )
** GUI_MODIFY_PASS_THROUGH : Modify pass through disk
** byte 0,1 : length
** byte 2 : command code 0x41
** byte 3 : device #
** byte 4 : scsi channel (0/1)
** byte 5 : scsi id (0-->15)
** byte 6 : scsi lun (0-->7)
** byte 7 : tagged queue (1 : enabled)
** byte 8 : cache mode (1 : enabled)
** byte 9 : max speed (0/1/2/3/4,
** async/20/40/80/160 for scsi)
** (0/1/2/3/4, 33/66/100/133/150 for ide )
** GUI_DELETE_PASS_THROUGH : Delete pass through disk
** byte 0,1 : length
** byte 2 : command code 0x42
** byte 3 : device# to be deleted
** GUI_IDENTIFY_DEVICE : Identify Device
** byte 0,1 : length
** byte 2 : command code 0x43
** byte 3 : Flash Method
** (0:flash selected, 1:flash not selected)
** byte 4/5/6/7 : IDE device mask to be flashed
** note .... no response data available
** GUI_CREATE_RAIDSET : Create Raid Set
** byte 0,1 : length
** byte 2 : command code 0x50
** byte 3/4/5/6 : device mask
** byte 7-22 : raidset name (if byte 7 == 0:use default)
** GUI_DELETE_RAIDSET : Delete Raid Set
** byte 0,1 : length
** byte 2 : command code 0x51
** byte 3 : raidset#
** GUI_EXPAND_RAIDSET : Expand Raid Set
** byte 0,1 : length
** byte 2 : command code 0x52
** byte 3 : raidset#
** byte 4/5/6/7 : device mask for expansion
** byte 8/9/10 : (8:0 no change, 1 change, 0xff:terminate,
** 9:new raid level,
** 10:new stripe size
** 0/1/2/3/4/5->4/8/16/32/64/128K )
** byte 11/12/13 : repeat for each volume in the raidset
** GUI_ACTIVATE_RAIDSET : Activate incomplete raid set
** byte 0,1 : length
** byte 2 : command code 0x53
** byte 3 : raidset#
** GUI_CREATE_HOT_SPARE : Create hot spare disk
** byte 0,1 : length
** byte 2 : command code 0x54
** byte 3/4/5/6 : device mask for hot spare creation
** GUI_DELETE_HOT_SPARE : Delete hot spare disk
** byte 0,1 : length
** byte 2 : command code 0x55
** byte 3/4/5/6 : device mask for hot spare deletion
** GUI_CREATE_VOLUME : Create volume set
** byte 0,1 : length
** byte 2 : command code 0x60
** byte 3 : raidset#
** byte 4-19 : volume set name
** (if byte4 == 0, use default)
** byte 20-27 : volume capacity (blocks)
** byte 28 : raid level
** byte 29 : stripe size
** (0/1/2/3/4/5->4/8/16/32/64/128K)
** byte 30 : channel
** byte 31 : ID
** byte 32 : LUN
** byte 33 : 1 enable tag
** byte 34 : 1 enable cache
** byte 35 : speed
** (0/1/2/3/4->async/20/40/80/160 for scsi)
** (0/1/2/3/4->33/66/100/133/150 for IDE )
** byte 36 : 1 to select quick init
**
** GUI_MODIFY_VOLUME : Modify volume Set
** byte 0,1 : length
** byte 2 : command code 0x61
** byte 3 : volumeset#
** byte 4-19 : new volume set name
** (if byte4 == 0, not change)
** byte 20-27 : new volume capacity (reserved)
** byte 28 : new raid level
** byte 29 : new stripe size
** (0/1/2/3/4/5->4/8/16/32/64/128K)
** byte 30 : new channel
** byte 31 : new ID
** byte 32 : new LUN
** byte 33 : 1 enable tag
** byte 34 : 1 enable cache
** byte 35 : speed
** (0/1/2/3/4->async/20/40/80/160 for scsi)
** (0/1/2/3/4->33/66/100/133/150 for IDE )
** GUI_DELETE_VOLUME : Delete volume set
** byte 0,1 : length
** byte 2 : command code 0x62
** byte 3 : volumeset#
** GUI_START_CHECK_VOLUME : Start volume consistency check
** byte 0,1 : length
** byte 2 : command code 0x63
** byte 3 : volumeset#
** GUI_STOP_CHECK_VOLUME : Stop volume consistency check
** byte 0,1 : length
** byte 2 : command code 0x64
** ---------------------------------------------------------------------
** 4. Returned data
** ---------------------------------------------------------------------
** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
** (B) Length : 2 bytes
** (low byte 1st, excludes length and checksum byte)
** (C) status or data :
** <1> If length == 1 ==> 1 byte status code
** #define GUI_OK 0x41
** #define GUI_RAIDSET_NOT_NORMAL 0x42
** #define GUI_VOLUMESET_NOT_NORMAL 0x43
** #define GUI_NO_RAIDSET 0x44
** #define GUI_NO_VOLUMESET 0x45
** #define GUI_NO_PHYSICAL_DRIVE 0x46
** #define GUI_PARAMETER_ERROR 0x47
** #define GUI_UNSUPPORTED_COMMAND 0x48
** #define GUI_DISK_CONFIG_CHANGED 0x49
** #define GUI_INVALID_PASSWORD 0x4a
** #define GUI_NO_DISK_SPACE 0x4b
** #define GUI_CHECKSUM_ERROR 0x4c
** #define GUI_PASSWORD_REQUIRED 0x4d
** <2> If length > 1 ==>
** data block returned from controller
** and the contents depends on the command code
** (E) Checksum : checksum of length and status or data byte
**************************************************************************
|
