blob: ecab5a06bd74588ce25b41238b4afece80c4de70 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
|
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
1) Currently supported are:
- Hauppauge HVR-1600
- Compro VideoMate H900
- Yuan MPC718
- Conexant Raptor PAL/SECAM devkit
2) Some people have problems getting the i2c bus to work.
The symptom is that the eeprom cannot be read and the card is
unusable. This is probably fixed, but if you have problems
then post to the video4linux or ivtv-users mailinglist.
3) VBI (raw or sliced) has not yet been implemented.
4) MPEG indexing is not yet implemented.
5) The driver is still a bit rough around the edges, this should
improve over time.
Firmware:
The firmware needs to be extracted from the Windows Hauppauge HVR-1600
driver, available here:
http://hauppauge.lightpath.net/software/install_cd/hauppauge_cd_3.4d1.zip
Unzip, then copy the following files to the firmware directory
and rename them as follows:
Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw
|
