summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/compressed/mmcif-sh7372.c
blob: e6180af241f647458caea31c37eb5c559b53e623 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
/*
 * sh7372 MMCIF loader
 *
 * Copyright (C) 2010 Magnus Damm
 * Copyright (C) 2010 Simon Horman
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 */

#include <linux/mmc/sh_mmcif.h>
#include <mach/mmcif.h>

#define MMCIF_BASE      (void __iomem *)0xe6bd0000

#define PORT84CR	(void __iomem *)0xe6050054
#define PORT85CR	(void __iomem *)0xe6050055
#define PORT86CR	(void __iomem *)0xe6050056
#define PORT87CR	(void __iomem *)0xe6050057
#define PORT88CR	(void __iomem *)0xe6050058
#define PORT89CR	(void __iomem *)0xe6050059
#define PORT90CR	(void __iomem *)0xe605005a
#define PORT91CR	(void __iomem *)0xe605005b
#define PORT92CR	(void __iomem *)0xe605005c
#define PORT99CR	(void __iomem *)0xe6050063

#define SMSTPCR3	(void __iomem *)0xe615013c

/* SH7372 specific MMCIF loader
 *
 * loads the zImage from an MMC card starting from block 1.
 *
 * The image must be start with a vrl4 header and
 * the zImage must start at offset 512 of the image. That is,
 * at block 2 (=byte 1024) on the media
 *
 * Use the following line to write the vrl4 formated zImage
 * to an MMC card
 * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
 */
asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
{
	mmcif_init_progress();
	mmcif_update_progress(MMCIF_PROGRESS_ENTER);

	/* Initialise MMC
	 * registers: PORT84CR-PORT92CR
	 *            (MMCD0_0-MMCD0_7,MMCCMD0 Control)
	 * value: 0x04 - select function 4
	 */
	 __raw_writeb(0x04, PORT84CR);
	 __raw_writeb(0x04, PORT85CR);
	 __raw_writeb(0x04, PORT86CR);
	 __raw_writeb(0x04, PORT87CR);
	 __raw_writeb(0x04, PORT88CR);
	 __raw_writeb(0x04, PORT89CR);
	 __raw_writeb(0x04, PORT90CR);
	 __raw_writeb(0x04, PORT91CR);
	 __raw_writeb(0x04, PORT92CR);

	/* Initialise MMC
	 * registers: PORT99CR (MMCCLK0 Control)
	 * value: 0x10 | 0x04 - enable output | select function 4
	 */
	__raw_writeb(0x14, PORT99CR);

	/* Enable clock to MMC hardware block */
	__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);

	mmcif_update_progress(MMCIF_PROGRESS_INIT);

	/* setup MMCIF hardware */
	sh_mmcif_boot_init(MMCIF_BASE);

	mmcif_update_progress(MMCIF_PROGRESS_LOAD);

	/* load kernel via MMCIF interface */
	sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
			      (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);


	/* Disable clock to MMC hardware block */
	__raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);

	mmcif_update_progress(MMCIF_PROGRESS_DONE);
}