summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-exynos/mach-smdkv310.c
blob: 35548e3c097d8e34916d027457ec6baa2d02b903 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
/* linux/arch/arm/mach-exynos4/mach-smdkv310.c
 *
 * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/serial_core.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <linux/platform_data/usb-exynos.h>

#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>

#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/clock.h>
#include <plat/hdmi.h>

#include <mach/map.h>

#include <drm/exynos_drm.h>
#include "common.h"

/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
				 S3C2410_UCON_RXILEVEL |	\
				 S3C2410_UCON_TXIRQMODE |	\
				 S3C2410_UCON_RXIRQMODE |	\
				 S3C2410_UCON_RXFIFO_TOI |	\
				 S3C2443_UCON_RXERR_IRQEN)

#define SMDKV310_ULCON_DEFAULT	S3C2410_LCON_CS8

#define SMDKV310_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
				 S5PV210_UFCON_TXTRIG4 |	\
				 S5PV210_UFCON_RXTRIG4)

static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
	[0] = {
		.hwport		= 0,
		.flags		= 0,
		.ucon		= SMDKV310_UCON_DEFAULT,
		.ulcon		= SMDKV310_ULCON_DEFAULT,
		.ufcon		= SMDKV310_UFCON_DEFAULT,
	},
	[1] = {
		.hwport		= 1,
		.flags		= 0,
		.ucon		= SMDKV310_UCON_DEFAULT,
		.ulcon		= SMDKV310_ULCON_DEFAULT,
		.ufcon		= SMDKV310_UFCON_DEFAULT,
	},
	[2] = {
		.hwport		= 2,
		.flags		= 0,
		.ucon		= SMDKV310_UCON_DEFAULT,
		.ulcon		= SMDKV310_ULCON_DEFAULT,
		.ufcon		= SMDKV310_UFCON_DEFAULT,
	},
	[3] = {
		.hwport		= 3,
		.flags		= 0,
		.ucon		= SMDKV310_UCON_DEFAULT,
		.ulcon		= SMDKV310_ULCON_DEFAULT,
		.ufcon		= SMDKV310_UFCON_DEFAULT,
	},
};

static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
	.cd_type		= S3C_SDHCI_CD_INTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
	.max_width		= 8,
	.host_caps		= MMC_CAP_8_BIT_DATA,
#endif
};

static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
	.cd_type		= S3C_SDHCI_CD_GPIO,
	.ext_cd_gpio		= EXYNOS4_GPK0(2),
	.ext_cd_gpio_invert	= 1,
};

static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
	.cd_type		= S3C_SDHCI_CD_INTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
	.max_width		= 8,
	.host_caps		= MMC_CAP_8_BIT_DATA,
#endif
};

static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
	.cd_type		= S3C_SDHCI_CD_GPIO,
	.ext_cd_gpio		= EXYNOS4_GPK2(2),
	.ext_cd_gpio_invert	= 1,
};

static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
				   unsigned int power)
{
	if (power) {
#if !defined(CONFIG_BACKLIGHT_PWM)
		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
		gpio_free(EXYNOS4_GPD0(1));
#endif
		/* fire nRESET on power up */
		gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
		mdelay(100);

		gpio_set_value(EXYNOS4_GPX0(6), 0);
		mdelay(10);

		gpio_set_value(EXYNOS4_GPX0(6), 1);
		mdelay(10);

		gpio_free(EXYNOS4_GPX0(6));
	} else {
#if !defined(CONFIG_BACKLIGHT_PWM)
		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
		gpio_free(EXYNOS4_GPD0(1));
#endif
	}
}

static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
	.set_power		= lcd_lte480wv_set_power,
};

static struct platform_device smdkv310_lcd_lte480wv = {
	.name			= "platform-lcd",
	.dev.parent		= &s5p_device_fimd0.dev,
	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
};

#ifdef CONFIG_DRM_EXYNOS_FIMD
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
	.panel	= {
		.timing	= {
			.left_margin	= 13,
			.right_margin	= 8,
			.upper_margin	= 7,
			.lower_margin	= 5,
			.hsync_len	= 3,
			.vsync_len	= 1,
			.xres		= 800,
			.yres		= 480,
		},
	},
	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
	.default_win	= 0,
	.bpp		= 32,
};
#else
static struct s3c_fb_pd_win smdkv310_fb_win0 = {
	.max_bpp	= 32,
	.default_bpp	= 24,
	.xres		= 800,
	.yres		= 480,
};

static struct fb_videomode smdkv310_lcd_timing = {
	.left_margin	= 13,
	.right_margin	= 8,
	.upper_margin	= 7,
	.lower_margin	= 5,
	.hsync_len	= 3,
	.vsync_len	= 1,
	.xres		= 800,
	.yres		= 480,
};

static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
	.win[0]		= &smdkv310_fb_win0,
	.vtiming	= &smdkv310_lcd_timing,
	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
};
#endif

static struct resource smdkv310_smsc911x_resources[] = {
	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K),
	[1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \
						| IRQF_TRIGGER_LOW),
};

static struct smsc911x_platform_config smsc9215_config = {
	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
	.phy_interface	= PHY_INTERFACE_MODE_MII,
	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
};

static struct platform_device smdkv310_smsc911x = {
	.name		= "smsc911x",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(smdkv310_smsc911x_resources),
	.resource	= smdkv310_smsc911x_resources,
	.dev		= {
		.platform_data	= &smsc9215_config,
	},
};

static uint32_t smdkv310_keymap[] __initdata = {
	/* KEY(row, col, keycode) */
	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};

static struct matrix_keymap_data smdkv310_keymap_data __initdata = {
	.keymap		= smdkv310_keymap,
	.keymap_size	= ARRAY_SIZE(smdkv310_keymap),
};

static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = {
	.keymap_data	= &smdkv310_keymap_data,
	.rows		= 2,
	.cols		= 8,
};

static struct i2c_board_info i2c_devs1[] __initdata = {
	{I2C_BOARD_INFO("wm8994", 0x1a),},
};

/* USB EHCI */
static struct s5p_ehci_platdata smdkv310_ehci_pdata;

static void __init smdkv310_ehci_init(void)
{
	struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;

	s5p_ehci_set_platdata(pdata);
}

/* USB OHCI */
static struct exynos4_ohci_platdata smdkv310_ohci_pdata;

static void __init smdkv310_ohci_init(void)
{
	struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;

	exynos4_ohci_set_platdata(pdata);
}

/* USB OTG */
static struct s3c_hsotg_plat smdkv310_hsotg_pdata;

/* Audio device */
static struct platform_device smdkv310_device_audio = {
	.name = "smdk-audio",
	.id = -1,
};

static struct platform_device *smdkv310_devices[] __initdata = {
	&s3c_device_hsmmc0,
	&s3c_device_hsmmc1,
	&s3c_device_hsmmc2,
	&s3c_device_hsmmc3,
	&s3c_device_i2c1,
	&s5p_device_i2c_hdmiphy,
	&s3c_device_rtc,
	&s3c_device_usb_hsotg,
	&s3c_device_wdt,
	&s5p_device_ehci,
	&s5p_device_fimc0,
	&s5p_device_fimc1,
	&s5p_device_fimc2,
	&s5p_device_fimc3,
	&s5p_device_fimc_md,
	&s5p_device_g2d,
	&s5p_device_jpeg,
	&exynos4_device_ac97,
	&exynos4_device_i2s0,
	&exynos4_device_ohci,
	&samsung_device_keypad,
	&s5p_device_mfc,
	&s5p_device_mfc_l,
	&s5p_device_mfc_r,
	&exynos4_device_spdif,
	&samsung_asoc_idma,
	&s5p_device_fimd0,
	&smdkv310_device_audio,
	&smdkv310_lcd_lte480wv,
	&smdkv310_smsc911x,
	&exynos4_device_ahci,
	&s5p_device_hdmi,
	&s5p_device_mixer,
};

static void __init smdkv310_smsc911x_init(void)
{
	u32 cs1;

	/* configure nCS1 width to 16 bits */
	cs1 = __raw_readl(S5P_SROM_BW) &
		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
		S5P_SROM_BW__NCS1__SHIFT;
	__raw_writel(cs1, S5P_SROM_BW);

	/* set timing for nCS1 suitable for ethernet chip */
	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
}

/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
	.no = EXYNOS4_GPD0(1),
	.func = S3C_GPIO_SFN(2),
};

static struct platform_pwm_backlight_data smdkv310_bl_data = {
	.pwm_id = 1,
	.pwm_period_ns  = 1000,
};

/* I2C module and id for HDMIPHY */
static struct i2c_board_info hdmiphy_info = {
	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
};

static struct pwm_lookup smdkv310_pwm_lookup[] = {
	PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
};

static void s5p_tv_setup(void)
{
	/* direct HPD to HDMI chip */
	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
}

static void __init smdkv310_map_io(void)
{
	exynos_init_io(NULL, 0);
	s3c24xx_init_clocks(clk_xusbxti.rate);
	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}

static void __init smdkv310_reserve(void)
{
	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}

static void __init smdkv310_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkv310_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);
	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);

	samsung_keypad_set_platdata(&smdkv310_keypad_data);

	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
	pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup));

#ifdef CONFIG_DRM_EXYNOS_FIMD
	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
	exynos4_fimd0_gpio_setup_24bpp();
#else
	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
#endif

	smdkv310_ehci_init();
	smdkv310_ohci_init();
	s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);

	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}

MACHINE_START(SMDKV310, "SMDKV310")
	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
	.atag_offset	= 0x100,
	.smp		= smp_ops(exynos_smp_ops),
	.init_irq	= exynos4_init_irq,
	.map_io		= smdkv310_map_io,
	.handle_irq	= gic_handle_irq,
	.init_machine	= smdkv310_machine_init,
	.timer		= &exynos4_timer,
	.reserve	= &smdkv310_reserve,
	.restart	= exynos4_restart,
MACHINE_END

MACHINE_START(SMDKC210, "SMDKC210")
	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
	.atag_offset	= 0x100,
	.smp		= smp_ops(exynos_smp_ops),
	.init_irq	= exynos4_init_irq,
	.map_io		= smdkv310_map_io,
	.handle_irq	= gic_handle_irq,
	.init_machine	= smdkv310_machine_init,
	.init_late	= exynos_init_late,
	.timer		= &exynos4_timer,
	.reserve	= &smdkv310_reserve,
	.restart	= exynos4_restart,
MACHINE_END